ASNT Basic Level III Module 1 (Study Test)

MODULE 1
1. SNT-TC-1A 1992 is applicable to how many NDT methods?

a. 7
b. 8
c. 9
d. 10
2. Which of the following statements is true with respect to SNT-TC-1A?

a. This document specifies the requirements for establishment of qualification and examination program.
b. This document provides guidelines for the establishment of qualification and certification program.
c. This document specifies the requirements for establishment of a qualification and certification program.
d. This document provides guidelines for the establishment of qualification and examination program
3. Written testimony of qualification is termed:

a. Documentation
b. Certification
c. Testimonial
d. Authentication
4. Certifying agency is defined as:

a. The Employer
b. The Outside Agency
c. The ASNT Level III
d. Both The Employer and the ASNT Level III
5. Which of the following NDT Levels should be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to
applicable codes, standards and specifications?
a. Level I
b. Level II
c. Level III
d. Level II and Level III
6. To be considered for certification at Level III a candidate should satisfy which of the following criteria?
a. Four years at college or university with a degree in engineering or science plus one years’ experience in NDT.
b. Four years at college or university with a degree in engineering or science plus two years’ experience in NDT.
c. Three years’ experience as NDT Level II and one year’s experience as NDT Level I.
d. Five years’ experience as NDT Level II.
7. Which of the following statements is false with respect to the Written Practice?
a. The employer shall establish a written practice.
b. The written practice should describe levels of responsibility.
c. The written practice shall be submitted to clients for acceptability.
d. The written practice shall be maintained on file.
8. The requirement for vision examination are as follows:

a. Jaeger J1 at a distance not less than 12 inches administered annually.
b. Jaeger J2 at a distance not less than 15 inches administered annually.
c. Jaeger J2 at a distance not less than 12 inches administered annually.
d. Jaeger J2 at a distance not less than 12 inches administered bi-annually.
9. The following results were obtained as a result of examination: Practical: 90% General Theory: 68% Specific Theory: 92% What is the
Composite grade and has the candidate passed or failed?
a. 83.3% Pass
b. 83.3% Fail
c. 85.5% Pass
d. 85.5% Fail
10. The number of questions for Ultrasonic Testing at Level 1 General Theory is:
a. 20
b. 30
c. 35
d. 40
11. The number of questions for magnetic particle inspection at Level III specific theory is:
a. 15
b. 20
c. 30
d. 40
12. When carrying out practical examination at NDT Level III how many check points are necessary to confirm an understanding of NDT
Variables and the employer’s procedural requirements?
a. 1
b. 5
c. 10
d. 15
13. When carrying out practical examination at NDT Level II the minimum number of samples to be tested is?
a. 1
b. 2
c. 3
d. 4
14. A candidate for re-examination must wait a minimum of:-

a. 7 Days
b. 20 Days
c. 30 days
d. Receive suitable additional training as determined by NDT Level III before examination
e. 30 Days and receive suitable additional training as determined by NDT Level III before examination
15. A candidate is required to be examined directly to Level II in Penetrant Inspection. How many months experience must the candidate
Have?
a. 1
b. 2
c. 3
d. 6
16. Outside training services must be in accordance with the employers written practice and are the responsibility of:-
a. NDT Level III

b. Outside Agency
c. Employer
d. Customer
17. Color contrast differentiation should be conducted upon initial certification and then:-
a. Annually
b. At 2 year intervals
c. At 3 year intervals
d. At 5 year intervals
18. The employer’s certification shall be deemed??? When employment is terminated.

a. Suspended
b. Annulled
c. Nullified
d. Revoked
19. How many different techniques are identified in leak testing?

a. 2
b. 3
c. 4
d. 5
20. Initial experience may be gained simultaneously in two or more methods if the candidate spends a minimum of??? of work time on each
Method for which certification is sought.
a. 20%
b. 25%
c. 33%
d. 50%
Answers to Module 1
1. D
2. B
3. B
4. A
5. B
6. A
7. C
8. C
9. B
10. D
11. A
12. C
13. A
14. C
15. C
16. C
17. C
18. D
19. C
20. B

ASNT Basic Level III Module 1 (Study Test)

Uploaded by

Copyright:

Available Formats

ASNT Basic Level III Module 1 (Study Test)

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ASNT Basic Level III Module 1 (Study Test)

Uploaded by

Copyright:

Available Formats

MODULE 1

1. SNT-TC-1A 1992 is applicable to how many NDT methods?

2. Which of the following statements is true with respect to SNT-TC-1A?

3. Written testimony of qualification is termed:

4. Certifying agency is defined as:

8. The requirement for vision examination are as follows:

14. A candidate for re-examination must wait a minimum of:-

a. NDT Level III

18. The employer’s certification shall be deemed??? When employment is terminated.

19. How many different techniques are identified in leak testing?

You might also like