Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Cat 936e

    Uploaded by

    Alberto Ferradás
    Desarmado valvula de descarga del convertidor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cat 936e

    Uploaded by

    Alberto Ferradás
    1K views5 pages
    Desarmado valvula de descarga del convertidor

    Original Title

    CAT 936E

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Desarmado valvula de descarga del convertidor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views5 pages

    Cat 936e

    Uploaded by

    Alberto Ferradás
    Desarmado valvula de descarga del convertidor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGI...

    Página 1 de 5

    Cerrar SIS

    Pantalla anterior

    Producto: WHEEL LOADER


    Modelo: 936 WHEEL LOADER 45Z06163
    Configuración: 936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE

    Desarmado y Armado
    936 WHEEL LOADER POWER TRAIN
    Número de medio -SENR2911-01 Fecha de publicación -01/10/2004 Fecha de actualización -13/06/2005

    SENR29110022

    Torque Converter Outlet Relief Valve


    SMCS - 3101-011; 3101-012; 3101-015; 3101-016

    Remove Torque Converter Outlet Relief Valve


    START BY:

    a. remove lower cab shrouds (right hand shroud only) *

    *
    This operation is in Vehicle Systems Disassembly And Assembly section.

    NOTE: The torque converter outlet relief valve is located on the right side of the torque converter.

    1. Drain the transmission oil.

    2. Remove four bolts (1), and remove right hand panel assembly (2).

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/07/2015
    936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGI... Página 2 de 5

    3. Remove four bolts (4), and disconnect tube assembly (3) from the outlet relief valve.

    4. Remove the bolt, and disconnect the clip that holds wire assembly (5) to outlet relief valve (7).

    5. Remove the other two bolts (6), and remove outlet relief valve (7) from the torque converter.

    Install Torque Converter Outlet Relief Valve

    1. Make sure the O-ring seals are installed on outlet relief valve (3), and put clean transmission oil
    on them.

    2. Put outlet relief valve (3) in position on the torque converter, and install two lower bolts (2) that
    hold it.

    3. Install the bolt, and connect the clip that holds wire assembly (1) to the outlet relief valve.

    4. Make sure the O-ring seal is installed in the tube assembly, and put clean transmission oil on it.

    5. Install four bolts (5), and connect tube assembly (4) to the outlet relief valve.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/07/2015
    936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGI... Página 3 de 5

    6. Put right hand panel assembly (7) in position on the machine, and install four bolts (6) that hold
    it.

    7. Fill the transmission with oil to the correct level. See the Maintenance Guide.

    END BY:

    a. install lower cab shrouds (right hand shroud only) *

    *
    This operation is in the Vehicle Systems Disassembly And Assembly section.

    Disassemble Torque Converter Outlet Relief Valve


    START BY:

    a. remove torque converter outlet relief valve

    1. Remove O-ring seals (1) from relief valve (2).

    2. Remove bolts (5) and (6). Remove covers (3) and (4) and the O-ring seals from the relief valve.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/07/2015
    936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGI... Página 4 de 5

    3. Remove spring (9), spacers (8) and valve spool (7) from relief valve (2).

    4. Remove ring (13), retainer (12), spring (11) and poppet (10) from valve spool (7).

    Assemble Torque Converter Outlet Relief Valve


    1. Make sure all of the parts of the relief valve are clean and free of dirt and foreign material. Put
    clean oil on all the parts at assembly.

    2. Install poppet (1), spring (2), retainer (3) and ring (4) in valve spool (5). Make sure the shoulder
    on retainer (3) is toward spring (2) when it is installed.

    NOTE: Spacers (6) are used to make an adjustment to the pressure needed to open the torque
    converter outlet relief valve. See Power Shift Transmission Testing And Adjusting for the correct
    pressure setting.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/07/2015
    936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGI... Página 5 de 5

    3. Install valve spool (5), spacers (6) and spring (7) in valve body (8) as shown.

    4. Install O-ring seals (10) and covers (9) and (11) on the ends of valve body (8).

    5. Install O-ring seals (12) and (13) in valve body (8).

    END BY:

    a. install torque converter outlet relief valve

    Copyright 1993 - 2015 Caterpillar Inc. Mon Jul 13 16:35:09 UTC+0200 2015
    Todos los derechos reservados.
    Red privada para licenciados del SIS.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 13/07/2015

    You might also like