Phased Array Probes and Accessories

for Manual and Mechanized Testing

Phased Array Probes with Wedges

Probes
Order No. Elements Element Frequency Bandwidth Plug Type Cable
Pitch x Width Length

1481.251 16 0.90 x 10 mm 2 MHz 75 % IPEX 3m

1481.2512 16 0.90 x 10 mm 2 MHz 75 % Hypertronics 3m

1481.2513 16 0.90 x 10 mm 2 MHz 75 % Lemo, 18 pins 3m

1481.551 16 0.75 x 10 mm 5 MHz 80 % IPEX 3m

1481.5512 16 0.75 x 10 mm 5 MHz 80 % Hypertronics 3m

1481.5513 16 0.75 x 10 mm 5 MHz 80 % Lemo, 18 pins 3m

Probe 1482.501
1481.801 16 0.60 x 5 mm 10 MHz 90 % IPEX 3m

1482.501 32 0.60 x 8 mm 5 MHz 80 % IPEX 3m

1482.801 32 0.60 x 5 mm 10 MHz 90 % IPEX 3m

1483.251 64 0.85 x 10 mm 2 MHz 80 % IPEX 3m

1483.551 64 0.60 x 10 mm 5 MHz 80 % IPEX 3m

Delay lines for straight beam incidence

Order No. for Probe Type Incidence Material Threads, Distances Dimensions Water
Angle* LxWxH Irrigation

1814.201 1482.xxx 0° Polystyrene M3, 22 mm / 10 mm 57 x 30 x 20 mm -

1814.202 1482.xxx 0° Polystyrene M3, 22 mm / 10 mm 57 x 30 x 30 mm -

1814.203 1482.xxx 0° Polystyrene M3, 22 mm / 10 mm 57 x 30 x 30 mm yes

1814.301 1483.xxx 0° Polystyrene M3, 38 mm / 26.5 mm 70 x 35 x 15 mm -

1814.302 1483.xxx 0° Polystyrene M3, 38 mm / 26.5 mm 85 x 35 x 30 mm -

Delay line 1814.301 1814.303 1483.xxx 0° Polystyrene M3, 38 mm / 26.5 mm 85 x 35 x 30 mm yes

* Incidence angle of longitudinal waves in steel

Angle beam wedges

Order No. for Probe Type Incidence Material Threads, Distances Dimensions Water
Angle* LxWxH Irrigation
W
1814.131 1481.xxx 50° Perspex M3, 22 mm 38 x 30 x 20 mm -

1814.132 1481.xxx 50° Perspex M3, 22 mm 38 x 30 x 20 mm yes

H
1814.221 1482.xxx 55° Polystyrene M3, 22 / 10 mm 53 x 30 x 27 mm -

1814.222 1482.xxx 55° Polystyrene M3, 22 / 10 mm 53 x 30 x 27 mm yes

L
1814.321 1483.xxx 55° Polystyrene M3, 38 / 26.5 mm 96 x 35 x 48 mm -

1814.322 1483.xxx 55° Polystyrene M3, 38 / 26,5 mm 96 x 35 x 48 mm yes

Angle beam wedge 1814.131
* Incidence angle of shear waves in steel

For testing on curved surfaces the wedges can be delivered with customized convex or concave radius.

2
Phased Array Wedges with Water Irrigation

Plane delay 1814.203 with water irrigation Wedge delay 1814.132 with water irrigation

Water is supplied via the nozzles on top of the delay or wedge.

Even in vertical or overhead positions: The notches in the bottom provide an excellent coupling.

Weld testing on a pillar of the famous Wuppertal Suspension Railway ... ... in a vertical position with water irrigation

3
Phased Array Probes for Mechanized Testing with Water Coupling

Probe 1598.649 Probe 1598.732 Probe 1598.679

Water nozzle for probe 1598.666 and 1598.649 with customized radius, e. g. for mechanized testing of longitudinal tube welds

Probes
Order No. Elements Element Frequency Bandwidth Cable Dimensions Radius Ring Plug Type
Pitch x Width Length LxWxH Segment

1598.666 16 1.40 x 8 mm 2 MHz 75 % 4m 30 x 20 x 40 mm *) - - Hypertronics

1598.649 32 0.70 x 8 mm 4 MHz 75 % 4m 30 x 20 x 40 mm *) - - Hypertronics

1598.732 64 1.0 x 15 mm 4 MHz 75 % 4m 84 x 26 x 57 mm - - Hypertronics

1598.731 128 1.0 x 15 mm 4 MHz 75 % 4m 148 x 26 x 57 mm - - Hypertronics

1598.679 64 0.9 x 12 mm 5 MHz 75 % 4m 90 x 23 x 47 mm **) 60 mm 55° Hypertronics

*) Housing dimension without flange

**) Height from apex of the curved transducer surface

The probes comply with the standards ASTM E2491-13 and DIN EN 16392-2:2014.
Further probes, wedges and water nozzles on request.

4
TOFD Probes and Accessories

TOFD caliper with 2 probes, 2 wedges, 2 probe cables and position encoder

TOFD Probe Holder

Order No. Description

6148.510 TOFD Caliper for 2 probes with position encoder

TOFD Probes
Order No. Description Frequency Diameter Thread Connector

6148.610 TOFD probe 2 MHz 6 mm M12 Lemo 00

6148.615 TOFD probe 5 MHz 6 mm M12 Lemo 00

6148.620 TOFD probe 10 MHz 3 mm M12 Lemo 00

Probe (Example)
6148.625 TOFD probe 15 MHz 3 mm M12 Lemo 00

Accessory
Order No. Description

1616.010 Coaxial cable Lemo 00 / Lemo 00, length 1 m

TOFD Wedges with Water Irrigation

Order No. Description

6148.650 TOFD wedge, 45° longitudinal wave in steel

6148.655 TOFD wedge, 60° longitudinal wave in steel

6148.660 TOFD wedge, 70° longitudinal wave in steel

Wedge with water irrigation (Example)

5
Combined Testing with Phased Array and TOFD

Probe holders with double gimbal suspension

For phased array probes 1481.xxx For TOFD wedges 6148.xxx

Example of a scanner for manual testing of circumferential tube welds with position encoder and suspensions for
2 phased array probes and 2 TOFD probes

6
Plugs for Phased Array Probes and Adaptors for Combined Testing

Standard plug type IPEX Hypertronics plug

Adaptor Hypertronics to IPEX, order no.: 6148.101 Splitter 2 x IPEX to 1 x IPEX, order no.: 6148.102

Lemo plug for phased array probes with 16 elements, A comfortable solution: adaptor for 2 x Lemo to IPEX,
type 1481.xxx order no.: 1698.158

7
Accessories

Leaflet P 14 Phased Array e 10_16 · Subject to changes without notice · Printed in Germany 10/16 · 7499.P14PAUT.EN.1016
Wire encoder with magnetic foot, scan length 500 mm, Wheel encoder
40 pulses/mm, order no.:1885.002

Roller probe for circumferential testing of bars and tubes Roller probe for longitudinal testing of bars and tubes

Roller probe for testing on plane surfaces

KARL DEUTSCH Pruef- und Messgeraetebau GmbH + Co KG DIN EN ISO

9001
Otto-Hausmann-Ring 101 · 42115 Wuppertal · Germany certified
Telephone (+49-202) 7192-0 · Fax (+49-202) 71 49 32
[email protected] · www.karldeutsch.de