Scribd
Upload
177 views1 page

User IRIS EN PDF

This document provides quick guidelines for operating an addressable fire panel: 1. When a FIRE event occurs, the panel indicates FIRE alarm in the zone and activates sounders to alert of fire. 2. To silence alarms, enter an access code and check for an actual fire - if none, silence sounders. If fire exists, activate outputs like sounders. 3. For a FAULT event, check the fault type and clear alarm messages with an access code. Call maintenance for FAULTs or WARNINGs like low battery.

Uploaded by

Ace Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views1 page

User IRIS EN PDF

This document provides quick guidelines for operating an addressable fire panel: 1. When a FIRE event occurs, the panel indicates FIRE alarm in the zone and activates sounders to alert of fire. 2. To silence alarms, enter an access code and check for an actual fire - if none, silence sounders. If fire exists, activate outputs like sounders. 3. For a FAULT event, check the fault type and clear alarm messages with an access code. Call maintenance for FAULTs or WARNINGs like low battery.

Uploaded by

Ace Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Quick guidelines for operation with addressable fire panel IRIS

FIRE Event in the System FAULT Event in the System


FIRE ALARM Indication
FIRE alarm in the zone FAULT Event Indication
Activated Sounders

FIRE in premises Short circuit


Panel:01, Loop: 1 Panel:01, Loop: 1

001 001

Access 1 Access 1

Turn off the buzzer: Turn off the buzzer:


FIRE in premises Short circuit
Alarms 001 Panel:01, Loop: 1 Panel:01, Loop: 1
Faults

Go to the zone with fire alarm Check the type of FAULT!


event and check for a real
presence of FIRE

If NO FIRE in the premises - turn off the sounders:


WARNING Message event in the System
**** Silence Alarm

Enter code for


ACCESS LEVEL 2 or 3

Clean me now;
Panel:01, Loop:01, Device:01
If THERE IS FIRE in the premises and “Delay override” is programmed for the
sounders - activate the outputs (sounders, control and signaling devices, etc):
DelayOverride
112
001

Clear all alarm messages (access level 2 or 3): Access 1

Turn off the buzzer:


Low battery;
The panel Warnings Panel:01, Periphery Device
is in normal
operation Check the type of WARNING!
mode:

Call the MAINTENANCE SERVICE and report for the type of FAULT or WARNING event:
Tel.:.......................................................
Mobile:..................................................
Responsible person:...................................................................................

You might also like