Module in Typewriter
Module in Typewriter
BBTE 3-2
Module 1:
Preparing to type
Good evening class! I hope you will find this module interesting and enjoyable.
This module will help you to enhance your knowledge in keyboarding. Are you ready to type?
Before you can type efficiently and accurately, you should first familiarize yourself with the
different parts and function of a typewriter. Today we will tackle about typewriter.
1. Identify and point out the different parts and function of a typewriter.
2. Insert and remove the paper correctly.
3. Acquire the proper posture in typing; and
4. Strike keys properly.
How to learn from this module?
I want you to remember the first time you see and used typewriter. What do you feel?
Can you strike easily? Is it hard to type? Well typewriter is useful in the time that there is no
computer. That’s the first time we learn to strike the keyboard isn’t it? I want you to use and
study typewriter. This will give you knowledge and it is enjoyable to study. It helps you to type
in fastest time.
Do the activity and answer the self-check. Do not look on the paper of your seatmates.
PRETEST
Direction: Read each item carefully; encircle the letter of the correct answer.
1. A mechanical device equipped with an inked ribbon, a keyboard, which operates a row of
bars terminating in typefaces and other devices by which letters may be successively
printed on paper.
a. Typewriter
b. Pica
c. Elite
d. computer
2. Is a kind of typewriter that has a center point of 50 on the scale and has a small print? It
can type 12 characters to an inch and 102 characters on a long or short bond paper.
a. Typewriter
b. Pica
c. Elite
d. None of the above
3. It is a kind of typewriter that can type 10 character to an inch and 85 characters on a sheet
of bond paper.
a. Typewriter
b. Pica
c. Elite
d. None of the above
5. What part of the typewriter that advance carriage one space at a time?
a. Tab clear
b. tab bar
c. space bar
d. carriage release
6. It is a kind of typewriter that point where the cards and envelopes are pressed closed to the
cylinder.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
7. It is the top moving part of a typewriter which travels from left to right.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
8. It is a part of a typewriter that holds and turns forward/backward to turn the platen of
typewriter roller to desired typing position.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
9. It holds and moves the right to return the carriage to the left margin and make a line space.
a. carriage return
b. carriage release
c. cylinder knob
d. margin release
LESSON 1
Preparing to Type
Definition of terms:
Typewriter- a mechanical device equipped with an inked ribbon, a keyboard, which operates a
row of bars terminating in typefaces and other devices by which letters may be successively printed
on paper.
Pica- This has a big print and a center point of 42 on the scale. It is usually used in typing term
papers, thesis, and dissertations. It can type 10 characters to an inch and 85 characters on a sheet of
bond paper.
Elite- This is a kind of typewriter that has a center point of 50 on the scale and has a small print. It
can type 12 characters to an inch and 102 characters on a long or short bond paper.
Below are the picture of Pica and Elite typewriter.
Pica Elite
Do you want to know my parts and its function? Find it out below!
• Paper Guide Scale. Scale used to set the paper guide at point “0”.
• Left margin top. Depress and move to set left margin at desired stop.
• Line space finder. Regulate spaces, single space for 1, double for 2 and triple for 3
spacing.
• Carriage return lever. Hold and move to the right to return the carriage to the left margin
and to make a line space.
• Paper bail rolls. Hold paper against 1 cylinder.
• Tab bar. Press to move the carriage to desired stops.
• Margin release. Press to release the margin stops from it setting without adjusting the
margin set.
• Ribbon control selector. Press or move to desired color.
• Space bar. Tap with your right thumb to advance carriage one space at a time
• Paper bail and rollers. Lift up and down to clamp the paper against the cylinder, adjust
rollers equally on size of paper.
• Right margin stop. Press and move to adjust the right margin set.
• Paper release lever. Used to straighten and remove the paper without using the cylinder
knob.
• Carriage release. Hold the cylinder knobs and press the carriage levers to move the
cartridge freely from left to right.
• Cylinder knob. Hold and turn forward/backward to turn the platen of typewriter roller to
desired typing position.
• Paper/card holder. Metal or plastic material in front of the cylinder to hold the card or
envelope against the cylinder.
• Printing point indicator. Strike any key, hold on, the part where the key struck is used to
locate the point of printing.
• Back space key. Arrow key painting to the left to move the carriage one space to the left;
used for centering.
• Shift lock key. Press to set the keys to capital letters and upper case symbols.
Below are my essential operations, study and learn. Don’t hesitate to touch and explore
in me. I know you will find it easily and enjoyable.
Essential Operation:
1. Moving the carriage to the Right and Return
a. To push the carriage to the right, use the line space lever. Flip the lever with a twist of the
wrist.
b. To return the carriage to the left, b race the right hand on the cylinder knob and with the
first finger, press the carriage release. Then bring the carriage to the left margin. (For
manual typewriter only.)
c. For an electric typewriter, extend the little finger of the right hand and tap the carriage
return key. The carriage will quickly jump to the left and automatically move to the next
line.
The spacing of lines in typing is controlled by the line space regulator. Set it at 1 for
single spacing (no blank lines); at 2 for double spacing (one blank line between typed
lines); and 3 for triple spacing (two blank lines between typed lines.)
Typewriters are usually equipped with either pica or elite type size.
Pica has a larger print. It prints 10 letters to an inch. On a standard typing paper 8 ½” by
11” it allows 85 characters across the page.
An elite typewriter allows 12 spaces to an inch. It prints 102 characters across the page.
If a standard typing paper is inserted with the paper guide at 0-point, the center point on a
pica machine will be 42 and on an elite machine 51. (For convenience 50 is used as center point.)
The margins at the left and right sides of a typed page are controlled by the margin stops
that limit the line of typing. (The desired line of typing is usually indicated in most exercises; if
not, determine what length of writing is to be used). To plan the left and right margin settings,
these are the steps:
Left margin. Subtract half the desired line from the center point. For example, for a 40-
space line, subtract 20 from the center point you are using.
Right margin. Add half the desired line to the center point. Then add 5 extra spaces
allowance for end-line adjustments.
Margin setting varies considerably with the different brands and models of typewriters.
Most common ones are:
Hand-set mechanism. Many typewriters have hand-set levers or margin set keys. Each
lever is moved separately by hand.
a. Before you insert the paper, pull the paper bail up or out so that it will not interfere.
b. With your left hand, grasp the paper and put it behind the cylinder or platen against
the paper guide.
c. With your right hand, twirl the cylinder knob to draw paper in.
To remove paper, do the following:
a. Press the paper release lever with the first finger of the right hand to loosen paper.
b. Grasp the sheet and remove it from the machine.
c. Return the paper release lever to its original position.
If the paper inserted is not straight (left edges are not in line), do the following:
a. Lift the paper bail or depress the paper release to loosen paper.
b. Line up the top or left edges of the paper.
c. Return the paper release to its original position.
d. Place the paper bail over the paper to hold it firmly against the cylinder.
e. Set the small rollers about 4-inch apart on the scale.
For manual typewriters, strike each key with a firm, sharp stroke and release quickly.
For electric typewriters, tap each key lightly with the finger tips.
• Sit properly.
• Hips should be back in the chair.
• Relax the shoulders.
• Feet should be flat on the floor.
• Look at your right side.
Punctuation Rules:
PERIOD
EXCLAMATION POINT
1. Use an exclamation point at the end of sentence, phrase, or word to indicate strong
emotion. (Never use more than one exclamation point.)
QUESTION MARK
COMMA
1. Use a comma after each item in a series of at least three items. (It has become acceptable
to omit the comma before the conjunction in a series. However, it is important to remain
consistent.)
Example: I still need to take a test, write an essay, and check out a book.
2. Use commas after the street address and city in an address. (Do not use a comma after the
state.)
4. Use a comma to clarify large numbers. Counting from right to left, a comma is needed
after every 3 digits. This rule does not apply to years, where no commas are used at all.
Example: Jill was having problems with the unruly, disruptive children.
7. Use a comma after a dependent clause that begins a sentence. (Never use a comma before
a dependent clause at the end of a sentence.)
Example: Ariel said, "I knew you would win the contest."
10. Use a comma after a mild interjection, such as oh or well.
Example: Sincerely,
14. Use a comma to indicate where a pause is necessary in order to avoid confusion.
(Sometimes rewriting the sentence is a better choice.)
15. Use a comma after an appositive. (An appositive is a noun or noun phrase that gives
additional information about the noun that it follows. Do not use a comma after a
restrictive appositive, which is one that cannot be removed from the sentence without
changing the meaning of the sentence.)
Example: I went to the store to get napkins, plates, cups, forks, etc.
SEMICOLON
1. Use a semicolon to join two independent clauses. (This eliminates the need for a comma
and a conjunction.)
Example: We went on field trips to Topeka, Kansas; Freedom, Oklahoma; and Amarillo, Texas.
COLON
Example: You need the following items for class: pencil, pens, paper, ruler, and glue.
3. When mentioning a volume number and page number, use a colon between the two
items.
Example: You will find information about Mexico in Grolier Encyclopedia 17:245.
4. Use a colon after the greeting of a business letter.
Example: Reading Strategies That Work: Teaching Your Students to Become Better Readers is
an excellent resource.
6. Use a colon between the chapter and verse numbers for parts of the Bible.
APOSTROPHE
1. Use an apostrophe in a contraction to show where letters have been omitted, or left out.
Example: I don't think I can do this. (The apostrophe shows that the letter
2. Use an apostrophe when you leave out the first two numbers of a year.
Example: The metropolis's citizens were very friendly during our visit.
Example: My mother-in-law's car was in the garage during the hail storm. (singular)
10. To show possession of the same object by more than one noun, only make the last noun
in the series possessive.
Example: I'm looking for Mrs. Garcia, Mrs. Lee, and Miss Carter's office. (They all share the
same office.)
11. Use an apostrophe to form the plural of a number, letter, sign, or word used as a word.
Example: Check to see that you used the +'s and -'s correctly.
QUOTATION MARKS
1. Use quotation marks before and after a direct quote. If the speaker tag interrupts the
quoted material, then two sets of quotation marks are needed. However, do not put
quotation marks around the speaker tag.
2. Put quotation marks around the titles of short works, such as articles, songs, short stories,
or poems.
Example: Have you heard the song "Love Me Tender," by Elvis Presley?
3. Place quotation marks around words, letters, or symbols that are slang or being discussed
or used in a special way. (Underlining can be used for the same purpose.)
Example: "Have your read the poem, 'The Raven,' by Edgar Alan Poe?" I asked Chris.
5. Any punctuation used goes to the left of a quotation mark. However, if the punctuation is
used to punctuate the whole sentence and not just what is inside the quotation marks, then
it goes to the right.
ELLIPSIS
Example: I listened carefully as the teacher read Lincoln's inaugural address. "Four score and
seven years ago ...."
HYPHEN
DASH
PARENTHESES
1. Use a set of parentheses around a word or phrase in a sentence that adds information or
makes an idea more clear. (Punctuation is placed inside the parentheses to mark the
material in the parentheses. Punctuation is placed outside the parentheses to mark the
entire sentence. When the material in parentheses is longer than one sentence [such as
this information], then the punctuation for the final sentence is placed inside the
parentheses.)
Example: Please refer to Julius Caesar (Act IV, scene i [page 72]).
BRACKETS
1. Use brackets around words of your own that you add to the words of someone you are
quoting.
Example: The news anchor announced, "It is my sad duty to inform our audience that we are
now at war [with Iraq]."
1. Underline titles of long works such as books, magazines, albums, movies, etc. (Do not
underline end punctuation.)
Example: If you look closely, you'll see e pluribus on most U.S. currency.
3. Underline a word, number, or letter which is being discussed or used in a special way.
(Quotation marks can be used for the same purpose.)
Spacing
GWAM
Also known as GWPM, which is short for Gross Words per Minute, GWAM is short for Gross
Words A Minute and is similar to WPM except it does not account for any errors. GWAM is the
overall typing speed regardless of how many errors you make. GWAM is often used as a
measurement for users who are just learning to type and is later replaced by WPM.
GWAM can be easily calculated by typing text from an alternate source for 3 to 5 minutes and
taking the amount of words you typed and divide it by the amount of minutes you typed. For
example, if you typed 400 words in 5 minutes; divide 400 into 5 to get your 80GWAM.
Now that you know all about typewriter, we will have an activity.
Direction: The students will count until they will have their number. Their number will
be their designated number for the activity. The teacher will pick a number from the box
that will answer the activity. They will identify and match the unknown parts of the
typewriter using the different parts that is written in the cards.
Ribbon spool
carriage release
lever
Ribbon vibrator
Let see whether you have learned something from the discussion. Answer the self-check that
follows.
Self- Check:
Direction: Read each item carefully; encircle the letter of the correct answer.
1. It is the point where the cards and envelopes are pressed closed to the cylinder.
a. Card holder
b. Cylinder
c. Line space lever
d. Paper guide
10. The key that moves the carriage back one space at a time.
a. Back space key
b. Tab set key
c. Space bar
d. Tab clear key
Post-Test:
Direction: Read each item carefully; encircle the letter of the correct answer.
5. A mechanical device equipped with an inked ribbon, a keyboard, which operates a row of
bars terminating in typefaces and other devices by which letters may be successively
printed on paper.
e. Typewriter
f. Pica
g. Elite
h. computer
6. Is a kind of typewriter that has a center point of 50 on the scale and has a small print? It
can type 12 characters to an inch and 102 characters on a long or short bond paper.
a. Typewriter
b. Pica
c. Elite
d. None of the above
7. It is a kind of typewriter that can type 10 character to an inch and 85 characters on a sheet
of bond paper.
a. Typewriter
b. Pica
c. Elite
d. None of the above
5. What part of the typewriter that advance carriage one space at a time?
a. Tab clear
b. tab bar
c. space bar
d. carriage release
6. It is a kind of typewriter that point where the cards and envelopes are pressed closed to the
cylinder.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
7. It is the top moving part of a typewriter which travels from left to right.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
8. It is a part of a typewriter that holds and turns forward/backward to turn the platen of
typewriter roller to desired typing position.
a. card holder
b. paper guide
c. carriage
d. cylinder knob
9. It holds and moves the right to return the carriage to the left margin and make a line space.
a. carriage return
b. carriage release
c. cylinder knob
d. margin release
Activity: Post-test:
1. space bar 1. a
2. type lever 2. c
3. platen knob 3. b
4. carriage release lever 4. b
5. ribbon spool 5. d
6. shift key 6. a
7. ribbon vibrator 7. c
8. ribbon reverse button 8. d
9. key top 9. a
10. paper table 10. b
References:
Instructional Module in Keyboarding, Manlutac, Magnolia B.
http://staff.xu.edu/polt/typewriters/tw-parts.html
www.google.com
www.yahoo.com
http://t1.gstatic.com/images?
q=tbn:ANd9GcT3sJIE3vRU5LmOvF76xMZdWuAY3x_DAbEhUIeoEFi3KaaO1lY&t=1&us
g=__ivxkFFc9tP1hRk80d2unFu31FKU=
http://www.ninc.com/blog/index.php/archives/confessions-of-a-fiction-writing-
teacher