Scribd
Upload
32 views1 page

Belt Drives - Copydf

This table shows the typical factor (Fd) for different angles (αs) between the slack side of a belt drive and the horizontal. Fd decreases as the angle increases from 120 degrees to 200 degrees, with an Fd of 1.33 at 120 degrees down to 0.94 at 200 degrees.

Uploaded by

Pratik Walimbe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
32 views1 page

Belt Drives - Copydf

This table shows the typical factor (Fd) for different angles (αs) between the slack side of a belt drive and the horizontal. Fd decreases as the angle increases from 120 degrees to 200 degrees, with an Fd of 1.33 at 120 degrees down to 0.94 at 200 degrees.

Uploaded by

Pratik Walimbe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

αs 120o 130o 140o 150o 160o 170o 180o 190o 200o

Fd 1.33 1.26 1.19 1.13 1.08 1.04 1.00 0.97 0.94

Table 1. Typical factor ( Fd ) [1]

Design of Machine Elements Belt Drives and their Application

You might also like