6LPA-STP2, Yanmar
6LPA-STP2, Yanmar
6LPA-STP2, Yanmar
Alternator 12 V - 80 A
Cooling system Fresh water cooling by centrifugal fresh water pump and rubber impeller seawater pump
NOTE: Fuel condition: Density at 15°C = 0.86 g/cm 3; 1kW = 1.3596 mhp = 1.3410 HP
* Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046-1)
** Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Technical data is according to ISO 8665 / 3046
345 mm 321 mm
(5.
mm
1m
15º
260 mm
13
(10.2 in)
497.1 mm (19.6 in)
(5.2 in)
237 mm
8º mm
(9.8 in)
287 mm 287 mm 328.2 mm
(11,3 in) (11,3 in) (12.9 in) 6LPA-STP2
1220 mm (48 in) KMH50A marine gear
Performance Curves (Output is according ISO 8665)
Crankshaft Torque Nm
Instrument Panels
160
180
160
180
1-4
90
Accessories
Standard Package
• Sensor for instrument panel • Cooling water hoses
(New B, C and D-type) • Fuel water separator (integrated with fuel filter)
• Exhaust/water mixing elbow (L-type) • Alternator 12 V - 80 A
Optional
• Flexible mounts (2 pcs) • Sensor for VDO instrument panels • Control heads
• Exhaust mixing elbow, U-type (high riser) • Control heads • Air venting device for cooling water tank
• Analog instrument panels • Various Wire Harnesses (4, 6, 10M) • VDO instrumentation for main panel
(New B,C and D-type) • Lub oil evacuation pump and fly bridge
• Dual station Y harness • Dipstick for opposite side
Texts and illustrations are not binding. Yanmar Marine reserves the right to introduce adaptations without prior notification. Version: 2008-06
www.yanmarmarine.com