STAR™ High Pressure Threaded Fittings

NOV Fiber Glass Systems provides a broad range of high pressure fiberglass fittings and accessories to accompany our high pres-
sure line pipe. This allows for a complete corrosion free piping system. All of these fittings are manufactured using the filament
winding method of fabrication, using premium glass fibers, and quality epoxy resins. This ensures maximum pressure capabilities of
these composite elements.

Features for these fiberglass pipe fittings include:

• Pressure ratings are per STAR Standard Design. For API 15HR pressure ratings, refer to table below.
• Multiple pressure classes at design temperature
• Design temperature of 200°F (93°C)
• API 5B EUE or OD 8rd or 10rd threaded connections
• Multiple sizes to match all of the manufactured pipe sizes and pressure classes
• Mill tested to 1.25 times Design Pressure Rating
• Cyclo-aliphatic amine cured epoxy resin system (all fittings unless otherwise shown)

General Notes:
1. All fittings center line to face dimensions are nominal ± ¼ inch (6.4 mm).
2. All fittings are filament wound fiberglass reinforced epoxy.
3. Thread sizes correspond to thread types listed in product specifications. All 1½” EUE 10rd and 23⁄8” - 4½” EUE 8rd API threads
conform to API 5B Table 2.6a (L4 is minimum) and all 5½” - 95⁄8” OD 8rd casing threads conform to API 5B Table 2.3 (L4 is
minimum). The 2”-12” Star Super Seal is a proprietary connection.
4. The insertion depth or make-up length loss is listed by size under (X1 or X2) as inches (mm) per connection.
5. Typical dimensions are listed one time per section.
6. Weights are approximate.
7. Dimensions are U.S. Customary converted to metric.
8. API 15HR fittings require higher rated fittings according to the following table.
9. All fittings are designated by thread size based on pressure class of the pipe.
10. When ordering flanged valves, the ANSI bolt pattern should match the bolt pattern of the fiberglass flange. Some high pressure
(>3000 psi) line pipe use a larger thread size, requiring a different ANSI bolt pattern.

API 15HR Pressure Equivalent Standard Available Standard

Rating With Factor Design Rating Design Fitting Rating
psi psi psi
500 x 1.20 = 600 800
750 x 1.20 = 900 1000
1000 x 1.20 = 1200 1250
1250 x 1.20 = 1500 1500
1500 x 1.20 = 1800 2000
1750 x 1.20 = 2100 2500
2000 x 1.20 = 2400 2500
2250 x 1.20 = 2700 3000
2500 x 1.20 = 3000 3000
2750 x 1.20 = 3300 3500
3000 x 1.20 = 3600 4000
3250 x 1.20 = 3900 4000

www.fgspipe.com • [email protected]
90° Elbow Thread Pressure
Female x Female Size Rating A B X1 Wt
Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)

1.90 2000 (13,8) 4.25 (108,0) 3.0 (76,2) 2.06 (52,4) 4 (1,81)
2500 (17,2) 3.2 (81,3) 4.5 (2,04)
3000 (20,7) 3.4 (86,4) 5 (2,27)
4000 (27,6) 3.8 (96,5) 6 (2,72)
2 3⁄8 1250 (8,6) 5.00 (127,0) 3.2 (81,3) 2.56 (65,1) 5 (2,27)
2000 (13,8) 3.6 (91,4) 6 (2,72)
2500 (17,2) 3.9 (99,1) 7.5 (3,40)
3000 (20,7) 4.2 (106,7) 9.5 (4,31)
4000 (27,6) 4.7 (119,4) 13 (5,90)
2 7⁄8 1250 (8,6) 5.75 (146,1) 3.9 (99,1) 2.88 (73,0) 6.5 (2,95)
2000 (13,8) 4.3 (109,2) 8 (3,63)
2500 (17,2) 4.6 (116,8) 10 (4,54)
3000 (20,7) 5.0 (127,0) 12 (5,44)
4000 (27,6) 5.8 (147,3) 15 (6,80)
3½ 1250 (8,6) 6.50 (165,1) 4.7 (119,4) 3.13 (79,4) 8 (3,63)
2000 (13,8) 5.2 (132,1) 12.5 (5,67)
2500 (17,2) 5.6 (142,2) 17 (7,71)
3000 (20,7) 6.0 (152,4) 28 (12,7)
4000 (27,6) 7.0 (177,8) 40 (18,14)
4½ 1250 (8,6) 8.00 (203,2) 5.9 (149,9) 3.50 (88,9) 20 (9,07)
2000 (13,8) 6.7 (170,2) 29 (13,15)
2500 (17,2) 7.2 (182,9) 37 (16,78)
3000 (20,7) 7.7 (195,6) 35 (15,88)
4000 (27,6) 8.6 (218,4) 45 (20,41)
5½ 800 (5,5) 10.00 (254,0) 6.3 (160,0) 4.38 (111,1) 28 (12,70)
1250 (8,6) 6.8 (172,7) 36 (16,33)
2000 (13,8) 7.7 (195,6) 40 (18,14)
3000 (20,7) 8.8 (223,5) 52 (23,59)
4000 (27,6) 9.9 (251,5) 70 (31,75)
6 5⁄8 800 (5,5) 8.75 (222,3) 7.6 (193,0) 3.88 (98,4) 30 (13,61)
1000 (6,9) 7.9 (200,7) 33 (14,97)
1250 (8,6) 8.2 (208,3) 40 (18,14)
1500 (10,3) 8.6 (218,4) 45 (20,41)
2000 (13,8) 9.2 (233,7) 67 (30,39)
7 800 (5,5) 9.75 (247,7) 8.1 (205,7) 4.50 (114,3) 38 (17,24)
1250 (8,6) 8.7 (221,0) 48 (21,77)
2000 (13,8) 9.8 (248,9) 57 (25,85)
2500 (17,2) 10.5 (266,7) 67 (30,39) 
8 5⁄8 800 (5,5) 10.00 (254,0) 9.9 (251,5) 4.5 (114,3) 35 (15,88)
1000 (6,9) 10.2 (259,1) 40 (18,14)
1250 (8,6) 10.7 (271,8) 47 (21,32)
1500 (10,3) 11.1 (281,9) 57 (25,85)
2000 (13,8) 12.0 (304,8) 73 (33,11)
9 5⁄8 1500 (10,3) 11.75 (298,5) 12.3 (311,2) 4.75 (120,7) 75 (34,02)
2000 (13,8) 13.3 (337,8) 85 (38,56)

2
 Thread Pressure
90° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)
(continued)
8 SSS 800 (5,5) 10.50 (266,7) 10.0 (254,0) 4.75 (120,7) 37 (16,78)
1000 (6,9) 10.3 (261,6) 45 (20,41)
1250 (8,6) 10.8 (274,3) 45 (20,41)
10 SSS 500 (3,4) 10.00 (254,0) 12.6 (320,0) 5.40 (137,2) 62 (28,12)
800 (5,5) 13.3 (337,8) 75 (34,02)
1000 (6,9) 13.8 (350,5) 87 (39,46)
1250 (8,6) 14.4 (365,8) 105 (47,63)
12 SSS 500 (3,4) 13.25 (336,6) 14.6 (370,8) 6.10 (154,9) 74 (33,57)
800 (5,5) 15.4 (391,2) 95 (43,09)
1000 (6,9) 16.0 (406,4) 104 (47,17)
1250 (8,6) 16.6 (421,6) 125 (56,7)

Thread Pressure
45° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)

1.90 2000 (13,8) 3.125 (79,4) 2.9 (73,7) 2.06 (52,4) 3.5 (1,59)
2500 (17,2) 3.1 (78,7) 4 (1,81)
3000 (20,7) 3.3 (83,8) 5 (2,27)
4000 (27,6) 3.7 (94,0) 6 (2,72)
2 3⁄8 1250 (8,6) 4.250 (108,0) 3.2 (81,3) 2.56 (65,1) 3.5 (1,59)
2000 (13,8) 3.6 (91,4) 5 (2,27)
2500 (17,2) 3.8 (96,5) 6.2 (2,81)
3000 (20,7) 4.0 (101,6) 7.5 (3,40)
4000 (27,6) 4.5 (114,3) 11 (4,99)
2 ⁄8
7
1250 (8,6) 4.625 (117,5) 3.8 (96,5) 2.88 (73,0) 6 (2,72)
2000 (13,8) 4.2 (106,7) 7 (3,18)
2500 (17,2) 4.5 (114,3) 9 (4,08)
3000 (20,7) 4.8 (121,9) 11 (4,99)
4000 (27,6) 5.4 (137,2) 12 (5,44)
3½ 1250 (8,6) 5.00 (127,0) 4.6 (116,8) 3.13 (79,4) 8 (3,63)
2000 (13,8) 5.1 (129,5) 13 (5,90)
2500 (17,2) 5.5 (139,7) 15 (6,80)
3000 (20,7) 5.8 (147,3) 25 (11,34)
4000 (27,6) 6.6 (167,6) 38 (17,24)
4½ 1250 (8,6) 6.00 (152.4) 5.8 (147,3) 3.50 (88,9) 16 (7,26)
2000 (13,8) 6.5 (165,1) 21 (9,53)
2500 (17,2) 7.0 (177,8) 25 (11,34)
3000 (20,7) 7.5 (190,5) 30 (13,61)
4000 (27,6) 8.3 (210,8) 40 (18,14)

3
 Thread Pressure
45° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)
(continued)
5½ 800 (5,5) 8.25 (209,6) 6.2 (157,6) 4.38 (111,1) 22 (9,98)
1250 (8,6) 6.7 (170,2) 30 (13,61)
2000 (13,8) 7.5 (190,5) 34 (15,42)
2500 (17,2) 8.0 (203,2) 40 (18,14)
3000 (20,7) 8.5 (215,9) 50 (22,68)
4000 (27,6) 9.6 (243,8) 65 (29,48)
6 5⁄8 800 (5,5) 6.625 (168,3) 7.6 (193,0) 3.88 (98,4) 25 (11,34)
1000 (6,9) 7.8 (197,1) 28 (12,70)
1250 (8,6) 8.1 (205,7) 34 (15,42)
1500 (10,3) 8.5 (215,9) 38 (17,24)
2000 (13,8) 9.1 (231,1) 43 (19,50)
7 800 (5,5) 7.625 (193,7) 8.0 (203,2) 4.50 (114,3) 32 (14,51)
1250 (8,6) 8.6 (218,4) 30 (13,61)
2000 (13,8) 9.6 (243,8) 42 (19,05)
2500 (17,2) 10.2 (259,1) 55 (24,95)
8 ⁄8
5
800 (5,5) 7.250 (184,2) 9.9 (251,5) 4.50 (114,3) 33 (14,97)
1000 (6,9) 10.2 (259,1) 37 (16,78)
1250 (8,6) 10.6 (269,2) 45 (20,41)
1500 (10,3) 11.0 (279,4) 50 (22,68)
2000 (13,8) 12.0 (304,8) 67 (30,39)
9 ⁄8
5
1500 (10,3) 7.375 (187,3) 12.3 (312,4) 4.75 (120,7) 62 (28,12)
2000 (13,8) 13.2 (335,3) 80 (36,29)
8 SSS 800 (10,3) 8.75 (222,25) 10.0 (254,0) 4.75 (120,7) 34 (15,42)
1000 (6,9) 10.3 (261,6) 42 (19,05)
1250 (8,6) 10.8 (274,3) 48 (21,77)
10 SSS 500 (3,4) 10.0 (254,0) 12.4 (315,0) 5.40 (137,2) 38 (17,24)
800 (5,5) 13.0 (330,2) 51 (23,13)
1000 (6,9) 13.5 (342,9) 75 (34,02)
1250 (8,6) 14.1 (358,1) 100 (45,36)
12 SSS 500 (3,4) 11.5 (292,1) 14.6 (370,8) 6.10 (154,9) 55 (24,95)
800 (5,5) 15.3 (388,6) 66 (29,94)
1000 (6,9) 16.0 (406,4) 114 (51,71)
1250 (8,6) 16.6 (421,6) 129 (58,51)

Thread Pressure
30° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)

2 3⁄8 1250 (8,6) 4.25 (108,0) 3.2 (81,3) 2.56 (65,1) 3.5 (1,59)
2000 (13,8) 3.6 (91,4) 4.5 (2,04)
2500 (17,2) 3.8 (96,5) 6 (2,72)
3000 (20,7) 4.0 (101,6) 8 (3,63)
4000 (27,6) 4.5 (114,3) 9 (4,08)
8 5⁄8 800 (5,5) 7.250 (184,2) 9.9 (251,5) 4.50 (114,3) 22 (9,98)
1000 (6,9) 10.2 (259,8) 28 (12,70)
1250 (8,6) 10.6 (269,2) 34 (15,42)
1500 (10,3) 11.0 (279,4) 44 (19,96)
9 5⁄8 1500 (10,3) 7.375 (187,3) 12.1 (307,3) 4.75 (120,7) 53 (24,04)
2000 (13,8) 13.0 (330,2) 61 (27,66)

4
 Thread Pressure
22.5° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)
2 3⁄8 1250 (8,6) 4.000 (101,6) 3.2 (81,3) 2.56 (68,3) 3 (1,36)
2000 (13,8) 3.5 (88,9) 4 (1,81)
2500 (17,2) 3.8 (96,5) 5 (2,27)
3000 (20,7) 4.0 (101,6) 7 (3,18)
4000 (27,6) 4.5 (114,3) 8.5 (3,86)
3½ 1250 (8,6) 4.500 (114,3) 4.6 (116,8) 3.13 (79,4) 5.5 (2,49)
2000 (13,8) 5.1 (129,5) 9 (4,08)
2500 (17,2) 5.4 (137,2) 11 (4,99)
3000 (20,7) 5.7 (144,8) 13.5 (6,12)
4000 (27,6) 6.4 (162,5) 19 (8,62)
4½ 1250 (8,6) 5.000 (127,0) 5.8 (147,3) 3.50 (88,9) 10 (4,54)
2000 (13,8) 6.4 (162,6) 16.5 (7,48)
2500 (17,2) 6.8 (172,7) 21 (9,53)
3000 (20,7) 7.3 (185,4) 25.5 (11,57)
4000 (27,6) 8.1 (205,7) 36.5 (16,56)
5½ 800 (5,5) 8.250 (209,6) 6.2 (157,5) 4.38 (111,1) 9 (4,08)
1250 (8,6) 6.6 (167,6) 13.5 (6,12)
2000 (13,8) 7.4 (188,0) 23.4 (10,61)
3000 (20,7) 8.4 (213,4) 36.5 (16,56)
4000 (27,6) 9.3 (236,2) 52 (23,59)
6 ⁄8
5
800 (5,5) 5.75 (146,1) 7.5 (190,5) 3.88 (98,4) 11 (4,99)
1000 (6,9) 7.8 (198,1) 15 (6,80)
1250 (8,6) 8.0 (203,2) 18 (8,16)
2000 (13,8) 8.9 (226,1) 30 (13,61)
7 1250 (8,6) 6.50 (165,1) 8.5 (215,9) 4.50 (114,3) 21 (9,53)
2000 (13,8) 9.5 (241,3) 36.5 (16,56)
2500 (17,2) 10.1 (256,5) 47.5 (21,55)
8 ⁄8
5
800 (5,5) 5.875 (149,2) 9.8 (248,9) 4.50 (114,3) 20 (9,07)
1000 (6,9) 10.1 (256,9) 26 (11,79)
1250 (8,6) 10.5 (266,7) 32 (14,51)
1500 (10,3) 10.9 (276,9) 40 (18,14)
9 5⁄8 1500 (10,3) 7.375 (187,3) 12.1 (307,3) 4.75 (120,7) 50 (22,68)
2000 (13,8) 13.0 (330,2) 60.5 (27,44)
8 SSS 800 (5,5) 8.75 (222,25) 9.8 (249,0) 4.75 (120,7) 30 (13,60)
1000 (6,9) 10.2 (259,1) 38 (17,24)
1250 (8,5) 10.5 (266,7) 42 (19,05)
10 SSS 500 (3,4) 8.187 (208,0) 12.5 (317,5) 5.40 (137,2) 25.5 (11,57)
800 (5,5) 13.0 (330,2) 43 (19,5)
1000 (6,9) 13.5 (342,9) 50 (22,68)
1250 (8,5) 14.1 (358,1) 60 (27,22)
12 SSS 500 (3,4) 11.375 (288,9) 14.5 (368,3) 6.10 (154,9) 30.5 (13,83)
800 (5,5) 15.1 (383,5) 45.8 (20,77)
1000 (6,9) 15.7 (398,8) 63.2 (28,66)
1250 (8,5) 16.3 (414,0) 70 (31,75)

5
11.25° Elbow Thread Pressure
Female x Female Size Rating A B X1 Wt
Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)
2 3⁄8 1250 (8,6) 3.2 (81,3) 2.56 (65,1) 3 (1,36)

2000 (13,8) 3.5 (88,9) 4 (1,81)

2500 (17,2) 3.8 (96,5) 5 (2,27)

3000 (20,7) 4.0 (101,6) 7 (10,4)

4000 (27,6) 4.5 (114,3) 8.5 (12,7)

3½ 1250 (8,6) 5.500 (139,7) 4.5 (114,3) 3.13 (79,4) 5 (2,27)

2000 (13,8) 5.0 (127,0) 8 (3,63)

2500 (17,2) 5.3 (134,6) 10 (4,54)

3000 (20,7) 5.7 (144,8) 12 (5,44)

4000 (27,6) 6.3 (160,0) 17 (7,71)

4½ 1250 (8,6) 6.000 (152,4) 5.7 (144,8) 3.50 (88,9) 9 (4,08)

2000 (13,8) 6.4 (162,6) 15 (6,80)

2500 (17,2) 6.8 (172,7) 19 (8,62)

3000 (20,7) 7.2 (182,9) 23 (10,43)

4000 (27,6) 8.1 (205,7) 33 (14,97)

5½ 800 (5,5) 8.250 (209,6) 6.2 (157,5) 4.38 (111,1) 8 (3,63)

1250 (8,6) 6.6 (167,6) 12 (5,44)

2000 (13,8) 7.3 (185,4) 21 (9,53)

3000 (20,7) 8.3 (210,8) 33 (14,97)

4000 (27,6) 9.3 (236,2) 47 (21,32)

6 5⁄8 800 (5,5) 6.625 (168,3) 7.5 (190,5) 3.88 (98,4) 10 (4,54)

1000 (6,9) 7.7 (195,6) 13 (19,3)

1250 (8,6) 8.0 (203,2) 16 (7,26)

2000 (13,8) 8.9 (226,1) 27 (12,25)

7 1250 (8,6) 7.625 (193,7) 8.5 (215,9) 4.50 (114,3) 19 (8,62)

2000 (13,8) 9.4 (238,8) 33 (14,97)

2500 (17,2) 10.0 (254,0) 43 (19,50)

8 ⁄8
5
800 (5,5) 7.250 (184,2) 9.8 (248,9) 4.50 (114,3) 18 (8,16)

1000 (6,9) 10.1 (256,5) 24 (10,89)

1250 (8,6) 10.5 (266,7) 29 (13,15)

1500 (10,3) 10.8 (274,3) 36 (16,33)

9 ⁄8
5
1500 (10,3) 7.375 (187,3) 12.1 (307,3) 4.75 (120,7) 39 (17,69)
2000 (13,8) 13.0 (330,2) 55 (24,95)

6
 Thread Pressure
11.25° Elbow Size Rating A B X1 Wt
Female x Female Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)
(continued)
8 SSS 800 (5,5) 8.75 (222,25) 9.8 (248,9) 4.75 (120,7) 27 (12,24)
1000 (6,9) 10.1 (256,5) 35 (15,87)
1250 (8,6) 10.5 (248,9) 35 (15,88)
10 SSS 500 (3,4) 8.186 (208,0) 12.5 (317,5) 5.40 (137,2) 22 (9,98)
800 (5,5) 13.2 (335,3) 39 (17,69)
1000 (6,9) 13.5 (342,9) 46 (20,87)
1250 (8,6) 14.0 (355,6) 58 (26,31)
12 SSS 500 (3,4) 11.25 (285,8) 14.4 (365,8) 6.10 (154,9) 38 (17,24)
800 (5,5) 15.2 (386,1) 66 (29,94)
1000 (6,9) 15.6 (396,2) 83 (37,65) 
1250 (8,6) 16.2 (411,48) 106 (48,08)

Tee Thread Pressure

Female x Female Size Rating A B C X1 Wt
Inches psi (MPa) In (mm) In (mm) In (mm) In (mm) Lbs (kg)
1.90 2000 (13,8) 4.375 (111,1) 4.875 (123,8) 3.0 (76,2) 2.06 (52,4) 5.5 (2,49)
2500 (17,2) 3.2 (81,3) 6.5 (2,95)
3000 (20,7) 3.4 (86,4) 7.5 (3,40)
4000 (27,6) 3.9 (99,1) 10 (4,54)
2 ⁄8
3
1250 (8,6) 5.250 (133,4) 5.75 (146,1) 3.3 (83,8) 2.56 (65,1) 8 (3,63)
2000 (13,8) 3.7 (94,0) 10 (4,54)
2500 (17,2) 4.0 (101,6) 11 (4,99)
3000 (20,7) 4.2 (106,7) 12 (5,44)
4000 (27,6) 4.8 (121,9) 17 (7,71)
2 7⁄8 1250 (8,6) 5.75 (146,4) 6.50 (165,1) 3.9 (99,1) 2.88 (73,0) 10 (4,54)
2000 (13,8) 4.4 (111,8) 12 (5,44)
2500 (17,2) 4.8 (121,9) 14 (6,35)
3000 (20,7) 5.2 (132,1) 18 (8,16)
4000 (27,6) 5.9 (149,9) 28 (12,7)
3½ 1250 (8,6) 6.50 (165,1) 7.25 (184,2) 4.8 (121,9) 3.13 (79,4) 14 (6,35)
2000 (13,8) 5.4 (137,2) 21 (9,53)
2500 (17,2) 5.9 (149,9) 26 (11,79)
3000 (20,7) 6.3 (160,0) 50 (22,68)
4000 (27,6) 7.2 (182,9) 65 (29,48)
4½ 1250 (6,9) 7.50 (190,5) 8.25 (209,6) 6.0 (152,4) 3.50 (88,9) 25 (11,34)
2000 (13,8) 6.8 (172,7) 39 (17,69)
2500 (17,2) 7.3 (185,4) 48 (21,77)
3000 (20,7) 7.9 (200,7) 75 (34,02)
4000 (27,6) 8.9 (226,1) 85 (38,56)
5½ 800 (5,5) 9.00 (228,6) 9.75 (247,7) 6.4 (162,7) 4.38 (111,1) 32 (14,51)
1250 (8,6) 6.9 (175,3) 43 (19,5)
2000 (13,8) 7.8 (198,1) 70 (31,75)
3000 (20,7) 9.1 (231,1) 100 (45,36)
4000 (27,6) 10.2 (259,1) 115 (52,16)

7
 Pressure
Tee Thread
Rating C
Female x Female Size A B X1 Wt
Inches psi (MPa) In (mm) In (mm) In (mm) In (mm) Lbs (kg)
(continued)
6 5⁄8 800 (5,5) 8.50 (215,9) 9.25 (235,0) 7.7 (195,6) 3.88 (98,4) 36 (16,33)
1000 (6,9) 8.0 (203,2) 42 (19,05)
1250 (8,6) 8.4 (213,4) 60 (27,22)
1500 (10,3) 8.7 (221,0) 70 (31,75)
2000 (13,8) 9.5 (241,3) 80 (36,29)
7 800 (5,5) 9.75 (247,7) 10.5 (266,7) 8.2 (208,3) 4.50 (114,3) 45 (20,41)
1250 (8,6) 8.9 (226,1) 65 (29,48)
2000 (13,8) 10.1 (255,3) 75 (34,02)
2500 (17,2) 10.9 (275,6) 100 (45,36) 
8 ⁄8
5
800 (5,5) 10.00 (254,0) 10.75 (273,1) 10.1 (261,6) 4.50 (114,3) 50 (22,68)
1000 (6,9) 10.5 (266,7) 60 (27,22)
1250 (8,6) 10.9 (276,9) 70 (31.75)
1500 (10,3) 11.4 (289,6) 95 (43,09)
2000 (13,8) 12.0 (304,8) 100 (45,36)
9 5⁄8 1500 (10,3) 10.50 (266,7) 11.25 (285,8) 12.7 (322,6) 4.75 (120,7) 95 (43,1)
2000 (13,8) 13.7 (348,0) 110 (49,9)
8 SSS 800 (5,5) 11.5 (292,1) 12.5 (317,5) 10.1 (256,5) 4.75 (120,7) 50 (22,7)
1000 (6,9) 10.5 (266,7) 65 (19,5)
1250 (8,6) 10.9 (276,9) 65 (19,5)
10 SSS 500 (3,4) 12.0 (304,8) 12.75 (323,9) 12.7 (322,6) 5.40 (137,2) 76 (34,5)
800 (5,5) 13.5 (342,9) 90 (40,8)
1000 (6,9) 14.0 (355,6) 122 (55,3)
1250 (8,6) 14.6 (370,8) 160 (72,6)
12 SSS 500 (3,4) 14.75 (374,7) 14.75 (374,7) 14.8 (375,9) 6.10 (154,9) 102 (46,3)
800 (5,5) 15.6 (396,2) 145 (65,8)
1000 (6,9) 16.2 (411,5) 210 (95,3)
1250 (8,6) 16.9 (429,3) 240 (108,9)

8
Threaded Nipples* A - Standard Lengths Ft. (m)
Male x Male B
1 1.5 2
Thread Nominal
(.305) (.457) (.610)
* ALIPHATIC AMINE Size Size Pressure X1
CURED EPOXY Inches In (mm) psi (MPa) In (mm) Weight Lbs (KGS)
PRODUCTS
ONLY 1.90 1.44 (36,6) 4000 (27,6) 2.06 (52,4) 1.7 (0,77) 2.5 (1,13) 3.4 (1,54)

2 3⁄8 1.94 (49,3) 4000 (27,6) 2.56 (65,1) 2.0 (0,91) 3.1 (1,41) 4.1 (1,86)

2 7⁄8 2.37 (60,2) 3500 (24,1) 2.88 (73,0) 2.8 (1,27) 4.1 (1,86) 5.5 (2,49)

3½ 2.37 (60,2) 4000 (27,6) 3.13 (79,4) 5.8 (2,63) 8.6 (3,90) 11.5 (5,22)

3½ 2.94 (74,7) 3000 (20,7) 3.13 (79,4) 3.6 (1,63) 5.4 (2,45) 7.2 (3,27)

4 3.33 (85,6) 3000 (20,7) 3.88 (98,4) --- --- 9.4 (4,26)

4½ 2.94 (74,7) 4000 (27,6) 3.50 (88,9) --- 14.7 (6,67) 19.6 (8,89)

 4 ½ 3.33 (84,6) 4000 (27,6) 3.50 (88,9) --- 12.1 (5,49) 16.1 (7,30)

4½ 3.85 (97,8) 2500 (17,2) 3.50 (88,9) --- 7.7 (3,49) 10.3 (4.67)

5½ 3.85 (97,8) 4000 (27,6) 4.38 (111,1) --- 15.6 (7,08) 20.8 (9,43)

5½ 4.74 (120,4) 2000 (13,8) 4.38 (111,1) --- 8.3 (3,76) 11.1 (5,03)

6 5⁄8 5.50 (139,7) 2250 (15,5) 3.88 (98,4) --- 13.8 (6,26) 18.4 (8,35)

6 5⁄8 5.93 (150,6) 1000 (6,9) 3.88 (98,4) --- 11.2 (5,08) 14.9 (6,76)

7 5.50 (139,7) 2500 (17,2) 4.50 (114,3) --- 20.7 (9,39) 27.6 (12,52)

7 5.93 (150,6) 2000 (13,8) 4.50 (114,3) --- 14.4 (6,53) 19.2 (8,71)

8 5⁄8 5.93 (150,6) 2000 (13,8) 4.50 (114,3) --- --- 19.4 (8,80)

8 5⁄8 7.74 (196,6) 1250 (8,6) 4.50 (114,3) --- --- 19.4 (8,80)

9 5⁄8 7.74 (196,6) 2000 (13,8) 4.75 (120,7) --- --- 42.5 (19,28)

8 SSS 7.74 (196,6) 1250 (8,6) 4.75 (120,7) --- 20.2 (6,17) 27.0 (8,23)

10 SSS 9.84 (249,9) 1250 (8,6) 5.40 (137,2) --- 30.5 (9,27) 40.6 (12,37)

12 SSS 11.81 (300,0) 1250 (8,6) 6.10 (154,9) --- --- 51.5 (53,4)

9
Threaded Nipples*
Male x Male

* ALIPHATIC AMINE
CURED EPOXY
PRODUCTS
ONLY

A - Standard Lengths Ft. (m)

B
3 4 6 8 10
Thread Nominal
(.914) (1.219) (1.829) (2.438) (3.048)
Size Size Pressure Repair
Inches In (mm) psi (MPa) Weight Lbs (KGS) Nipples
1.90 1.44 (36,6) 4000 (27,6) 5.1 (2,31) 6.8 (3,08) 10.1 (4,58) 13.5 (6,12) 16.9 (7,67) 49.5 (22,5)

2 3⁄8 1.94 (49,3) 4000 (27,6) 6.1 (2,77) 8.2 (3,72) 12.2 (5,53) 16.3 (7,39) 20.4 (9,25) 60.5 (27,4)

2 7⁄8 2.37 (60,2) 3500 (24,1) 8.3 (3,76) 11.0 (4,99) 16.5 (7,48) 22.0 (9,98) 27.5 (12,47) 81.8 (37,1)

3½ 2.37 (60,2) 4000 (27,6) 17.3 (7,85) 23.0 (10,43) 34.5 (15,65) 46.0 (20,87) 57.5 (26,08) 168.9 (76,6)

3½ 2.94 (74,7) 3000 (20,7) 10.8 (4,90) 14.4 (6,53) 21.5 (9,75) 28.7 (13,02) 35.9 (16,28) 106.3 (48,2)

4 3.33 (85,6) 3000 (20,7) 14.1 (6,40) 18.8 (8,53) 28.3 (12,84) 37.7 (17,10) 47.1 (21,36) 140.8 (63,9)

4½ 2.94 (74,7) 4000 (27,6) 29.4 (13,34) 39.2 (17,78) 58.7 (26,63) 78.3 (35,52) 97.9 (44,41) 287.2 (130,3)

4½ 3.33 (84,6) 4000 (27,6) 24.2 (10,98) 32.2 (14,61) 48.4 (21,95) 64.5 (29,26) 80.6 (36,56) 238.2 (108,0)

4½ 3.85 (97,8) 2500 (17,2) 15.5 (7,03) 20.6 (9,34) 31.0 (14,06) 41.3 (18,73) 51.6 (23,41) 158.5 (71,9)

5½ 3.85 (97,8) 4000 (27,6) 31.2 (14,15) 41.6 (18,87) 62.4 (28,30) 83.2 (37,74) 104.0 (47,17) 317.1 (143,8)

5½ 4.74 (120,4) 2000 (13,8) 16.6 (7,53) 22.2 (10,07) 33.2 (15,06) 44.3 (20,09) 55.4 (25,13) 162.9 (73,9)

6 5⁄8 5.50 (139,7) 2250 (15,5) 27.6 (12,52) 36.8 (16,69) 55.2 (25,04) 73.6 (33,38) 92.0 (41,73) 273.2 (123,9)

6 5⁄8 5.93 (150,6) 1000 (6,9) 22.4 (10,16) 29.8 (13,52) 44.7 (20,28) 59.6 (27,03) 74.5 (33,79) 185.1 (84,0)

7 5.50 (139,7) 2500 (17,2) 41.5 (18,82) 55.3 (25,08) 82.9 (37,60) 96.7 (43,86) 138.2 (62,69) 383.9 (174,1)

7 5.93 (150,6) 2000 (13,8) 28.8 (13,06) 38.4 (17,42) 57.6 (26,13) 76.8 (34,84) 96.0 (43,54) 283.2 (128,5)

8 5⁄8 7.43 (188,7) 2000 (13,8) 29.1 (13,20) 38.8 (17,60) 58.3 (26,44) 77.7 (35,24) 97.1 (44,04) 297.1 (134,8)

8 5⁄8 7.74 (196,6) 1250 (8,6) 29.1 (13,20) 38.8 (17,60) 58.3 (26,44) 77.7 (35,24) 97.1 (44,04) 297.1 (134,8)

9 5⁄8 7.74 (196,6) 2000 (13,8) 63.7 (28,89) 85.0 (38,56) 127.4 (57,79) 169.9 (77,07) 212.4 (96,34) 630.9 (286,2)

8 SSS 7.74 (196,6) 1250 (8,6) 40.4 (18,3) 53.9 (24,4) 80.9 (36,7) 107.8 (48,9) 134.8 (61,1) 395.1 (179,2)

10 SSS 9.84 (249,9) 1250 (8,6) 61.0 (27,7) 81.3 (36,9) 121.9 (55,3) 163.0 (73,9) 203.2 (92,2) 609.6 (276,5)

12 SSS 1.81 (300,0) 1250 (8,6) 74.9 (34,0) 99.8 (45,3) 149.7 (67,9) 199.6 (90,5) 249.5 (113,2) 745.9 (338,3)

10
 A - Standard Lengths Ft. (m)
Threaded Nipples* B
1 1.5 2
Male x Male Thread Nominal
(.305) (.457) (.610)
Size Size Pressure X1
Inches In (mm) psi (MPa) In (mm) Weight Lbs (KGS)
* ANHYDRIDE EPOXY
PRODUCTS ONLY 1 1⁄2 1.50 (38,1) 3000 (20,7) 2.06 (52,4) 1.3 (0,59) 1.9 (0,89) 2.6 (1,18)

2 3⁄8 2.00 (50,8) 3000 (20,7) 2.56 (65,1) 1.6 (0,73) 2.4 (1,10) 3.2 (1,46)

2 7⁄8 2.43 (61,7) 3000 (20,7) 2.88 (73,0) 2.2 (0,99) 3.3 (1,48) 4.4 (1,98)

3 1⁄2 3.00 (76,2) 2900 (20,7) 3.13 (79,4) 2.9 (1,32) 4.4 (1,98) 5.8 (2,64)

4 1⁄2 3.91 (99,3) 2500 (17,2) 3.50 (88,9) 3.9 (1,77) 5.8 (2,66) 7.8 (3,54)

4 1⁄2 3.75 (95,3) 3000 (19,3) 3.50 (88,9) 5.1 (2,31) 7.6 (3,47) 10.2 (4,62)

51/2 4.74 (120,4) 2000 (13,8) 4.38 (98,4) --- 8.3 (3,76) 11.1 (5,03)

6 5⁄8 5.85 (148,6) 1500 (10,3) 3.88 (98,4) --- 8.7 (3,95) 11.6 (5,26)

6 5⁄8 5.50 (139,7) 2000 (13,8) 3.88 (98,4) --- 8.8 (4,01) 11.8 (5,35)

8 5⁄8 7.50 (196,6) 2000 (13,7) 4.50 (114,3) --- --- 23.4 (10,6)

Threaded Nipples* A - Standard Lengths Ft. (m)

Male x Male B 1 1.5 2
Thread Nominal (.305) (.457) (.610)
* AROMATIC AMINE Size Size Pressure X1
Inches In (mm) psi (MPa) In (mm) Weight Lbs (KGS)
PRODUCTS ONLY
1 1⁄2 1.50 (38,1) 2500 (19,0) 2.06 (52,4) 1.3 (0,6) 1.9 (0,6) 2.6 (1,2)

2 3⁄8 2.00 (50,8) 2250 (19,0) 2.56 (65,1) 1.6 (0,7) 2.4 (1,1) 3.2 (1,5)

2 7⁄8 2.43 (61,7) 2000 (17,2) 2.88 (73,0) 2.2 (1,0) 3.3 (1,5) 4.4 (2,0)

3 1⁄2 3.00 (76,2) 2000 (17,2) 3.13 (79,4) 2.9 (1,3) 4.4 (2,0) 5.8 (2,6)

4 1⁄2 3.91 (76,2) 1750 (15,5) 3.50 (88,9) 3.9 (1,8) 5.8 (2,7) 7.8 (3,5)

41/2 3.75 (95,2) 2250 (15,5) 3.50 (88,9) 3.9 (1,77) 5.8 (2,66) 7.8 (3,54)

51/2 4.74 (120,4) 1500 (10,3) 4.38 (111,1) --- 8.3 (3,76) 11.1 (5,03)

6 5⁄8 5.85 (139,7) 1000 (10,3) 3.88 (98,4) --- 8.7 (4,0) 11.6 (5,3)

65/8 5.50 (139,7) 1750 (12,1) 3.88 (98,4) --- 8.8 (4,01) 11.8 (5,35)

8 5⁄8 7.50 (196,6) 1250 (10,3) 4.50 (114,3) --- --- 23.4 (10,6)

11
 A - Standard Lengths Ft. (m)
Threaded B
3 4 6 8 10
Nipples* Thread Nominal
(.914) (1.219) (1.829) (2.438) (3.048)
Size Size Pressure Repair
Male x Male
Inches In (mm) psi (MPa) Weight Lbs (KGS) Nipples

*ANHYDRIDE 1 1⁄2 1.50 (38,1) 3000 (20,7) 3.9 (1,78) 5.2 (2,36) 7.8 (3,56) 10.4 (4,72) 13.0 (5,9) 14.7 (18,9)
EPOXY
PRODUCTS 2 3⁄8 2.00 (50,8) 3000 (20,7) 4.8 (2,19) 6.4 (2,92) 9.6 (4,38) 12.8 (5,84) 16.0 (7,3) 52.8 (23,9)
ONLY
2 7⁄8 2.43 (61,7) 3000 (20,7) 6.6 (2,96) 8.8 (3,96) 13.2 (5,92) 17.6 (7,92) 22.0 (9,9) 83.8 (38,0)

3 1⁄2 3.00 (76,2) 2900 (20,7) 8.7 (3,96) 11.6 (5,28) 17.4 (7,92) 23.2 (10,6) 29.0 (13,2) 109.4 (49,6)

4 1⁄2 3.91 (99,3) 2500 (17,2) 11.7 (5,31) 15.6 (7,08) 23.4 (10,6) 31.2 (14,2) 39.0 (17,7) 158.4 (71,8)

4 1⁄2 3.75 (95,3) 3000 (19,3) 15.3 (6,94) 20.4 (9,24) 30.6 (13,8) 40.8 (18,5) 51.0 (23,1) 173.1 (78,5)

51/2 4.74 (120,4) 2000 (13,8) 16.6 (7,53) 22.2 (10,07) 33.2 (15,06) 44.3 (20,09) 55.4 (25,13) 198.4 (89,9)

6 5⁄8 5.85 (148,6) 1500 (10,3) 17.7 (8,03) 23.2 (10,5) 34.8 (15,8) 46.4 (21,0) 58.0 (26,3) 252.8 (114,7)

6 5⁄8 5.50 (139,7) 2000 (13,8) 17.7 (8,03) 23.6 (10,7) 35.3 (16,0) 47.1 (21,4) 58.9 (26,7) 295.7 (134,1)

8 5⁄8 7.50 (196,6) 2000 (13,7) 35.2 (15,9) 46.8 (21,2) 70.4 (31,9) 93.6 (42,5) 117.0 (79,7) 450.6 (204,4)

Threaded
A - Standard Lengths Ft. (m)
Nipples* B
Male x Male 3 4 6 8 10
Thread Nominal (.914) (1.219) (1.829) (2.438) (3.048)
Size Size Pressure Repair
*AROMATIC Inches In (mm) psi (MPa) Weight Lbs (KGS) Nipples
AMINE
PRODUCTS 1 1 ⁄2 1.50 (38,1) 2500 (19,0) 3.9 (1,8) 5.2 (2,4) 7.8 (3,6) 10.4 (4,7) 13.0 (5,9) 44.4 (20,1)
ONLY
2 3⁄8 2.00 (50,8) 2250 (19,0) 4.8 (2,2) 6.4 (2,9) 9.6 (4,4) 12.8 (5,8) 16.0 (7,3) 61.1 (27,7)

2 7⁄8 2.43 (61,7) 2000 (17,2) 6.6 (3,0) 8.8 (4,0) 13.2 (5,9) 17.6 (7.9) 22.0 (9,9) 85.8 (38,9)

3 1⁄2 3.00 (76,2) 2000 (17,2) 8.7 (4,0) 11.6 (5,3) 17.4 (7,9) 23.2 (10,6) 29.0 (13,2) 113.5 (51,4)

4 1⁄2 3.91 (76,2) 1750 (15,5) 11.7 (5,3) 15.6 (7,1) 23.4 (10,6) 31.2 (14,2) 39.0 (17,7) 173.0 (78,5)

4 1⁄2 3.75 (95,2) 2250 (15,5) 15.3 (6,94) 20.4 (9,24) 30.6 (13,8) 40.8 (18,5) 51.0 (23,1) 174.0 (78,9)

51/2 4.74 (120,4) 1500 (10,3) 16.6 (7,53) 22.2 (10,07) 33.2 (15,06) 44.3 (20,09) 55.4 (25,13) 213.1 (96,6)

6 5⁄8 5.85 (139,7) 1000 (10,3) 17.4 (7,9) 23.2 (10,5) 34.8 (15,8) 46.4 (21,0) 58.0 (26,3) 223.7 (104,4)

6 5⁄8 5.50 (139,7) 1750 (12,1) 17.7 (8,03) 23.6 (10,7) 35.3 (16,0) 47.1 (21,4) 58.9 (26,7) 313.6 (142,2)

8 5⁄8 7.50 (196,6) 1250 (10,3) 35.2 (15,9) 46.8 (21,2) 70.4 (31,9) 93.6 (42,5) 117.0 (79,76) 403.8 (183,1)

12
 Pressure Pressure A B C Bolt (1)
Rating Rating Flange Flange Bolt Size Bolt
Flanges (2)
Thread psi psi O.D. Width Circle X1 No. Length Hole Size Wt
Female Size (MPa) (MPa) In In In In of In In Lbs
In 100°F 200°F (mm) (mm) (mm) (mm) Bolts (mm) (mm) (kg)

ANSI 150
285 260 6.0 3.06 4.75 2.53 .625 x 10 .750 4.6
2 3⁄8 4
(1,9) (1,8) (152,4) (77,7) (120,7) (64,3) (15,9 x 254,0) (19,1) (2,09)
285 260 7.0 3.38 5.50 2.88 .625 x 12 .750 7
2 7⁄8 4
(1,9) (1,8) (177,8) (85,9) (139,7) (73,0) (15,9 x 304,8) (19,1) (3,18)
285 260 7.5 3.63 6.00 3.13 .625 x 10 .750 8.1
3½ 4
(1,9) (1,8) (190,5) (92,2) (152,4) (79,4) (15,9 x 254,0) (19,1) (3,67)
285 260 9.0 4.00 7.50 3.50 .625 x 14 .750 12.0
4½ 8
(1,9) (1,8) (228,6) (101,6) (190,5) (88,9) (15,9 x 355,6) (19,1) (5,44)
285 260 11.0 4.375 9.50 3.88 .75 x 14 .875 17.5
6 5⁄8 8
(1,9) (1,8) (279,4) (111,1) (241,3) (98,4) (19,1 x 355,6) (22,2) (7,94)
285 260 11.0 5.00 9.50 4.50 .75 x 14 .875 18.4
7 8
(1,9) (1,8) (279,4) (127,0) (241,3) (114,3) (19,1 x 355,6) (22,2) (8,35)
285 260 13.5 5.00 11.75 4.50 .75 x 14 .875 28.5
8 5⁄8 8
(1,9) (1,8) (342,9) (127,0) (298,5) (114,3) (19,1 x 355,6) (22,2) (12,93)

9 5⁄8 285 260 13.5 5.25 11.75 4.75 8 .75 x 14 .875 24.8
(1,9) (1,8) (342,9) (133,4) (298,5) (120,7) (19,1 x 355,6) (22,2) (11,25)
285 260 13.5 5.00 11.75 4.75 .75 x 14 .875 28.2
8 SSS 8
(1,9) (1,8) (342,9) (127,0) (298,5) (120,7) (19,1 x 355,6) (22,2) (12,79)
285 260 16.0 5.75 14.25 5.40 .875 x 15 1.00 37.2
10 SSS 12
(1,9) (1,8) (406,4) (146,1) (362,0) (137,2) (22,2 x 381,0) (25,4) (16,87)
285 260 19.0 6.43 17.0 6.10 .875 x 16 1.00 61.1
12 SSS 12
(1,9) (1,8) (482,6) (163,3) (431,8) (154,9) (22,2 x 381,0) (25,4) (27,71)
ANSI 300
740 675 10.0 4.00 7.875 3.50 .75 x 14 .875 15.8
4½ 8
(5,1) (4,7) (254,0) (101,6) (200,0) (88,9) (19,1 x 355,6) (22,2) (7,17)
740 675 11.0 4.88 9.25 4.38 .75 x 14 .875 22.6
5½ 8
(5,1) (4,7) (279,4) (124,0) (235,0) (111,1) (19,1 x 355,6) (22,2) (10,25)
740 675 12.5 4.375 10.625 3.88 .75 x 14 .875 25.2
6 5⁄8 12
(5,1) (4,7) (317,5) (111,1) (269,9) (98,4) (19,1 x 355,6) (22,2) (11,43)
740 675 12.5 5.00 10.625 4.50 .75 x 14 .875 27.2
7 12
(5,1) (4,7) (317,5) (127,0) (269,9) (114,3) (19,1 x 355,6) (22,2) (12,34)
740 675 15.0 5.00 13.00 4.50 .875 x 14 1.00 38.7
8 5⁄8 12
(5,1) (4,7) (381,0) (1127,0) (330,2) (114,3) (22,2 x 355,6) (25,4) (17,55)

9 5⁄8 740 675 15.0 5.25 13.00 4.75 12 .875 x 14 1.00 35.4
(5,1) (4,7) (381,0) (133,4) (330,2) (120,7) (22,2 x 355,6) (25,4) (16,06)
740 675 15.0 5.00 13.00 4.75 .875 x 14 1.00 38.3
8 SSS 12
(5,1) (4,7) (381,0) (127,0) (330,2) (120,7) (22,2 x 355,6) (25,4) (17,375)
740 675 17.5 5.75 15.25 5.40 1 x 15 1.125 50.4
10 SSS 16
(5,1) (4,7) (444,5) (146,1) (387,4) (137,2) (25,4 x 381,0) (28,6) (22,86)
740 675 20.5 6.43 17.75 6.10 1.125 x 16 1.25 77.4
12 SSS 16
(5,1) (4,7) (520,7) (163,3) (450,9) (154,9) (28,6 x 406,4) (31,8) (35,10)

(1)
Bolt lengths in table are
for fiberglass-to-fiberglass
flange connections.
Fiberglass-to-steel bolt
lengths are provided in
INS8000.

(2)
Spiral wound gaskets
(Flexitalic®) are required in
all flange joints

13
 Pressure Pressure A B C Bolt (1)
Flanges(2) Rating Rating Flange Flange Bolt Size Bolt
Female Thread psi psi O.D. Width Circle X1 No. Length Hole Size Wt
(continued) Size (MPa) (MPa) In In In In of In In Lbs
In 100°F 200°F (mm) (mm) (mm) (mm) Bolts (mm) (mm) (kg)

ANSI 300/600(3)
1480 1350 6.125 2.56 4.50 2.06 .75 x 10 .875 4.3
1.90 4
(10,2) (9,3) (155,6) (66,0) (114,3) (52,4) (19,1 x 254,0) (22,2) (1,95)
1480 1350 6.5 3.06 5.00 2.56 .625 x 10 .750 5.3
2 3⁄8 8
(10,2) (9,3) (165,1) (77,7) (127,0) (65,1) (15,9 x 254,0) (19,1) (2,40)
1480 1350 7.5 3.38 5.875 2.88 .75 x 12 .875 7.6
2 7⁄8 8
(10,2) (9,3) (190,5) (85,9) (149,2) (73,0) (19,1 x 304,8) (22,2) (3,45)
1480 1350 8.25 3.63 6.625 3.13 .75 x 10 .875 9.7
3½ 8
(10,2) (9,3) (209,6) (92,2) (168,3) (79,4) (19,1 x 254,0) (22,2) (4,40)
ANSI 600(3)
4½ 1480 1350 10.75 4.00 8.50 3.50 8 .875 x 14 1.00 18.8
(10,2) (9,3) (273,1) (101,6) (215,9) (88,9) (22,2 x 355,6) (25,4) (8,53)
5½ 1480 1350 13.0 4.88 10.50 4.38 8 1 x 14 1.125 34.9
(10,2) (9,3) (330,2) (124,0) (266,7) (111,1) (25,4 x 355,6) (28,6) (15,83)
6 5⁄8 1480 1350 14.0 4.375 11.50 3.88 12 1 x 14 1.125 33.3
(10,2) (9,3) (355,6) (111,1) (292,1) (98,4) (25,4 x 355,6) (28,6) (15,10)
7 1480 1350 14.0 5.00 11.50 4.50 12 1 x 14 1.125 36.5
(10,2) (9,3) (355,6) (127,0) (292,1) (114,3) (25,4 x 355,6) (28,6) (16,56)
8 5⁄8 1480 1350 16.5 5.00 13.75 4.50 12 1.125 x 14 1.25 49.8
(10,2) (9,3) (419,1) (127,0) (349,3) (114,3) (28,6 x 355,6) (31,8) (22,59)
9 5⁄8 1480 1350 16.5 5.25 13.75 4.75 12 1.375 x 14 1.25 47.1
(10,2) (9,3) (419,1) (133,4) (349,3) (120,7) (34,9 x 355,6) (31,8) (21,36)
8 SSS 1480 1350 16.5 5.00 13.75 4.75 12 1.125 x 24 1.25 49.4
(10,2) (9,3) (419,1) (127,0) (349,3) (120,7) (28,575 x 609,6) (31,8) (22,41)
10 SSS 1480 1350 20 5.75 17 5.40 16 1.25 x 24 1.375 76.9
(10,2) (9,3) (508,0) (146,1) (431,8) (137,2) (31,75 x 609,6) (34,9) (34,88)
12 SSS 1480 1350 22 6.43 19.25 6.10 20 1.25 x 24 1.375 95.4
(10,2) (9,3) (558,8) (163,3) (489,0) (154,9) (31,75 x 609,6) (34,9) (43,27)
ANSI 900(3)
3½ 2220 2025 9.5 3.63 7.50 3.13 8 .875 x 10 1.00 13.7
(15,3) (14,0) (241,3) (92,2) (190,5) (79,4) (22,2 x 254,0) (25,4) (6,21)
4½ 2220 2025 11.5 4.00 9.25 3.50 8 1.125 x 14 1.25 21.5
(15,3) (14,0) (292,1) (101,6) (235,0) (88,9) (28,6 x 355,6) (31,8) (7,75)
5 ½ (4) 2220 2025 13.75 4.88 11.00 4.38 8 1.25 x 14 1.375 38.9
(15,3) (14,0) (349,3) (124,0) (279,4) (111,1) (31,8 x 355,6) (34,9) (17,64)
6 5⁄8 (4) 2220 2025 15.0 4.375 12.50 4.88 12 1.125 x 14 1.25 39.4
(15,3) (14,0) (381,0) (111,1) (317,5) (98,4) (28,6 x 355,6) (31,8) (17,87)
7 (4) 2220 2025 15.0 5.00 12.50 4.50 12 1.125 x 14 1.25 43.5
(15,3) (14,0) (381,0) (127,0) (317,5) (114,3) (28,6 x 355,6) (31,8) (19,73)
9 5⁄8 (4) 2220 2025 18.5 5.25 15.50 4.75 12 1.375 x 14 1.50 64.9
(15,3) (14,0) (469,9) (133,4) (393,7) (120,7) (34,9 x 355,6) (38,1) (29,44)

(1)
Bolt lengths in table are for Spiral wound gaskets
(2)
Steel backing plates are
(4)
Spacer rings are required
(3)

fiberglass-to-fiberglass flange (Flexitalic®) are required in required. for make-up of ANSI 600-
connections. Fiberglass- all flange joints 1500 when mated to steel
to-steel bolt lengths are raised face flanges.
provided in INS8000.

14
Flanges(2) Pressure Pressure A B C Bolt (1)
Female Rating Rating Flange Flange Bolt Size Bolt
(continued) Thread psi psi O.D. Width Circle X1 No. Length Hole Size Wt
Size (MPa) (MPa) In In In In of In In Lbs
In 100°F 200°F (mm) (mm) (mm) (mm) Bolts (mm) (mm) (kg)

ANSI 900/1500(3)
1.90 3705 3375 7.00 2.56 4.875 2.05 4 1 x 10 1.125 5.6
(25,6) (23,3) (177,8) (65,0) (123,8) (52,1) (25,4 x 254,0) (28,6) (2,54)
2 3⁄8 3705 3375 8.50 3.06 6.50 2.56 8 .875 x 10 1.00 9.7
(25,6) (23,3) (215,9) (77,7) (165,1) (65,1) (22,2 x 254,0) (25,4) (4,40)
2 7⁄8 3705 3375 9.625 3.38 7.50 2.88 8 1 x 12 1.125 13.6
(25,6) (23,3) (244,5) (85,9) (190,5) (73,0) (25,4 x 304,8) (28,6) (6,17)
ANSI 1500(3)
3½ 3705 3375 10.5 3.63 8.00 3.13 8 1.125 x 12 1.25 16.8
(25,6) (23,3) (266,7) (92,2) (203,2) (79,4) (25,4 x 304,8) (31,8) (7,62)
4½ 3705 3375 10.5 4.00 8.00 3.50 8 1.125 x 12 1.25 18.8
(25,6) (23,3) (266,7) (101,6) (203,2) (88,9) (25,4 x 304,8) (31,8) (8,53)
4 ½(4) 3705 3375 12.25 4.00 9.50 3.50 8 1.25 x 14 1.375 24.9
(25,6) (23,3) (311,2) (101,6) (241,3) (88,9) (31,8 x 355,6) (34,9) (11,29)
5 ½(4) 3705 3375 12.25 4.88 9.50 4.38 8 1.25 x 14 1.375 28.5
(25,6) (23,3) (311,2) (124,0) (241,3) (111,1) (31,8 x 355,6) (34,9) (12,93)
5 ½(4) 3705 3375 14.75 4.88 11.50 4.38 8 1.5 x 14 1.625 44.9
(25,6) (23,3) (374,7) (124,0) (292,1) (111,1) (38,1 x 355,6) (41,3) (20,37)
6 5⁄8(4) 3705 3375 15.5 4.375 12.5 3.88 12 1.375 x 14 1.50 41.1
(25,6) (23,3) (393,7) (111,1) (317,5) (98,4) (34,9 x 355,6) (38,1) (18,64)
7(4) 3705 3375 15.5 5.00 12.5 4.50 12 1.375 x 14 1.50 45.4
(25,6) (23,3) (393,7) (127,0) (317,5) (114,3) (34,9 x 355,6) (38,1) (20,59)
9 5⁄8(4) 3705 3375 19.0 5.25 15.5 4.75 12 1.625 x 14 1.75 72.0
(25,6) (23,3) (482,6) (133,4) (393,7) (120,7) (41,3 x 355,6) (44,5) (32,66)

Bolt Torque vs. Bolt Size

Bolt Torquing Sequence
7 1 Torque
3 1
3 5 Grade 2 Grade 5
Bolt Size
(inch) ft/lb N/m ft/lb N/m
6 4 5
⁄8” 54 73 89 120
2 4
2 8 3
⁄4” 96 130 160 216
15 1
11 1 11 5
7 5
7
⁄8” 155 210 258 349
7 9

3 9 3 13 1” 230 311 386 523

10 4 14 4
1 ⁄8”
1
324 439 544 737
10 8
6 8
6 12
1 ⁄4”1
460 623 776 1052
(1)
Bolt lengths in table are 2 12 2 16
for fiberglass-to-fiberglass 19 1
15 5 1 ⁄8 ”
3
595 806 1006 1363
flange connections. 11 9
Fiberglass-to-steel bolt 7 13 1 ⁄2”
1
795 1077 1347 1826
lengths are provided in
INS8000. 3 17 Multiply by 0.9 for plating
18 4
NOTE: Regardless of bolting material, do not
14 8 exceed Grade 5 torque.
Spiral wound gaskets
(2)

(Flexitalic®) are required in 10 12

6 16
all flange joints 2 20

Spacer rings are required

(3)

for make-up of ANSI 600-

1500 when mated to steel
raised face flanges.

(4) Steel backing plates are

required.

15
Changeover Couplings Pressure
Female x NPT Female Rating
Thread A B X1 X2 Wt
Size psi In In In In Lbs
Inches (MPa) (mm) (mm) (mm) (mm) (kg)

1.90 x 1.50 NPT 2000 5.0 3.0 2.06 1.02 1.5

(13,8) (127,0) (76,2) (52,4) (25,9) (0,68)

2 3⁄8 x 2 NPT 2000 4.625 3.7 2.56 1.05 2.5

(13,8) (117,5) (94,0) (65,1) (26,7) (1,13)

2 7⁄8 x 2 ½ NPT 1500 5.5 4.4 2.88 1.57 4.5

(10,3) (139,7) (111,6) (73,0) (39,9) (2,04)

3 ½ x 3 NPT 1500 6.0 5.3 3.13 1.63 6

(10,3) (152,4) (134,6) (79,4) (41,4) (2,72)

4 ½ x 4 NPT 1500 6.875 6.8 3.50 1.73 14

(10,3) (174,8) (172,7) (88,9) (43,9) (6,35)

4 ½ x 2 NPT 2000 13.0 4.80 3.50 1.06 14.0

(13,8) (330,2) (121,9) (88,9) (26,9) (20,8)

5 ½ x 5 NPT 1500 7.75 7.2 4.38 1.94 16

(10,3) (196,9 (182,9) (111,1) (49,3) (7,26)

6 5⁄8 x 6 NPT 1000 8.0 8.3 3.88 1.95 20

(6,9) (203,2) (210,8) (98,4) (49,5) (9,07)

7 x 6 NPT 1000 8.0 8.9 4.50 1.95 25

(6,9) (203,2) (226,1) (114,3) (49,5) (11,34)

8 5⁄8 x 8 NPT 1000 8.5 10.8 4.50 2.15 30

(6,9) (215,9) (274,3) (114,3) (54,6) (13,61)

9 5⁄8 x 8 NPT 1000 8.5 11.4 4.75 2.15 42

(6,9) (215,9) (289,6) (120,7) (54,6) (19,05)

16
Changeover Nipples Pressure
Rating
and Swages Thread A B X1 X2 Wt
Size psi In In In In Lbs
Male x NPT Male
Inches (MPa) (mm) (mm) (mm) (mm) (kg)

1.90 x 1.50 NPT 2000 9.0 2.15 2.06 1.02 1.1

(13,8) (228,6) (54,6) (52,4) (25,9) (0,50)

2 3⁄8 x 2 NPT 2000 10.0 2.60 2.56 1.05 1.7

(13,8) (254,0) (66,0) (65,1) (26,7) (0,77)

2 7⁄8 x 2 NPT 2000 11.0 3.10 2.88 1.06 3.5

(13,8) (279,4) (78,7) (73,0) (26,9) (5,21)

2 7⁄8 x 2 ½ NPT 1500 11.0 3.10 2.88 1.57 2.5

(10,3) (279,4) (78,7) (73,0) (39,9) (1,13)

3 NPT x 2 3⁄8 1500 11.0 3.75 1.63 2.56 5.5

(10,3) (279,4) (95,3) (41,4) (65,1) (8,18)

3 NPT x 2 7⁄8 1500 11.0 3.75 1.63 2.88 7.0

(10,3) (279,4) (95,3) (41,4) (73,0) (10,4)

3 ½ x 2 NPT 2000 11.0 3.75 3.13 1.06 5.5

(13,8) (279,4) (95,3) (79,4) (26,9) (8,18)

3 ½ x 2 ½ NPT 1500 11.0 3.75 3.13 1.57 7.0

(10,3) (279,4) (95,3) (79,4) (39,9) (10,4)

3 ½ x 3 NPT 1500 11.0 3.75 3.13 1.63 3.2

(10,3) (279,4) (95,3) (79,4) (41,4) (1,45)

4 NPT x 2 3⁄8 1500 13.0 4.80 1.73 2.56 12.0

(10,3) (330,2) (121,9) (43,9) (65,1) (17,9)

4 NPT x 3 ½ 1500 13.0 4.71 1.73 3.13 10.6

(10,3) (330,2) (119,6) (43,9) (79,4) (15,8)

4 ½ x 4 NPT 1500 12.0 4.80 3.50 1.94 5.2

(10,3) (304,8) (121,9) (88,9) (49,3) (2,36)

4 ½ x 2 NPT 2000 13.0 4.80 3.50 1.06 14.0

(13,8) (330,2) (121,9) (88,9) (26,9) (20,8)

4 ½ x 2 ½ NPT 1500 13.0 4.80 3.50 1.57 12.0

(10,3) (330,2) (121,9) (88,9) (39,9) (17,9)

4 ½ x 3 NPT 1500 13.0 4.71 3.50 1.63 10.6

(10,3) (330,2) (119,6) (88,9) (41,4) (15,8)

5 ½ x 5 NPT 1500 13.0 5.55 4.38 1.73 6.0

(10,3) (330,2) (141,0) (111,1) (43,9) (2,72)

6 5⁄8 x 6 NPT 1000 13.0 6.65 3.88 1.95 8.1

(6,9) (330,2) (168,9) (98,4) (49,5) (3,67)

7 x 6 NPT 1000 13.0 7.05 4.50 1.95 9.8

(6,9) (330,2) (179,1) (114,3) (49,5) (4,45)

8 5⁄8 x 8 NPT 1000 13.0 8.85 4.50 2.15 11.1

(6,9) (330,2) (224,8) (114,3) (54,6) (5,03)

9 5⁄8 x 8 NPT 1000 13.0 9.65 4.75 2.15 20.2

(6,9) (330,2) (245,1) (120,7) (54,6) (9,16)

17
 Pressure
Reducing Tee Rating
Female Thread A B C X1 X2 Wt
Size psi In In In In In Lbs
Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)

2 3⁄8 x 1.90 1500 5.25 5.75 3.4 2.56 2.06 11

(10,3) (133,4) (146,1) (86,4) (65,1) (52,4) (4,99)
2500 4.0 12
(17,2) (101,6) (5,44)
3 ½ x 2 3⁄8 1250 6.50 7.00 4.8 3.13 2.56 14
(8,6) (165,1) (177,8) (121,9) (79,4) (65,1) (6,35)
2000 5.5 21
(13,8) (139,7) (9,53)
2500 5.95 26
(17,2) (151,1) (11,79)
3000 6.4 50
(20,7) (162,6) (22,68)
4000 7.3 65
(27,6) (185,4) (29,48)
4 ½ x 2 3⁄8 1250 7.50 7.50 6.2 3.50 2.56 25
(8,6) (190,5) (190,5) (157,5) (88,9) (65,1) (11,34)
2000 7.0 39
(13,8) (177,8) (17,69)
2500 7.6 48
(17,2) (193,0) (21,77)
3000 8.1 75
(20,7) (205,7) (34,02)
4000 9.0 85
(27,6) (228,6) (38,56)
4½x3½ 1250 7.50 8.50 6.2 3.50 3.13 25
(8,6) (190,5) (215,9) (157,5) (88,9) (79,4) (11,34)
2000 7.0 39
(13,8) (177,8) (17,69)
2500 7.6 48
(17,2) (193,0) (21,77)
3000 8.1 75
(20,7) (205,7) (34,02)
4000 9.0 85
(27,6) (228,6) (38,56)
6 5⁄8 x 3 ½ 1250 8.50 9.75 8.5 3.88 3.13 60
(8,6) (215,9) (247,7) (215,9) (98,4) (79,4) (27,22)
2000 9.5 80
(13,8) (241,3) (36,29)
6 5⁄8 x 4 ½ 1250 8.50 9.75 8.5 3.88 3.50 60
(8,6) (215,9) (247,7) (215,9) (98,4) (88,9) (27,22)
2000 9.5 80
(13,2) (241,3) (36,29)
2250 10 100
(15,5) (254,0) (148,8)
7x3½ 2000 9.625 9.50 10.1 4.50 3.13 75
(13,2) (244,5) (241,3) (256,5) (114,3) (79,4) (34,02)
7x4½ 2000 10.00 10.1 3.50 75
(13,2) (254,0) (256,5) (88,9) (34,02)
8 5⁄8 x 3 ½ 1250 10.00 11.75 11.0 4.50 3.13 70
(8,6) (254,0) (298,5) (279,4) (114,3) (79,4) (31,75)
8 5⁄8 x 4 ½ 1250 11.0 3.50 70
(8,6) (279,4) (88,9) (31,75)
8 5⁄8 x 6 5⁄8 1250 11.0 3.88 55
(8,6) (279,4) (98,4) (24,95)
10 SSS x 6 5⁄8 800 12.00 12.00 13.5 5.40 3.88 85
(5,5) (304,8) (304,8) (342,9) (137,2) (98,4) (38,56)
1000 14.0 103
(6,9) (355,6) (46,723)
1250 14.6 120
(8,6) (370,8) (54,4)

18
 Pressure
Reducing Tee
Thread Rating A B C X1 X2 Wt
Female
Size psi In In In In In Lbs
(continued)
Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)
10 SSS x 8 5⁄8 800 12.00 12.00 13.5 5.4 4.50 90
(5,5) (304,8) (304,8) (342,9) (137,2) (114,3) (40,82)
1000 14.0 125
(6,9) (355,6) (56,70)
1250 14.6 160
(8,6) (370,8) (72,58)
10 SSS x 8 SSS 800 12.00 13.50 13.5 5.40 4.75 98
(5,5) (304,8) (342,9) (342,9) (137,2) (120,7) (44,45)
1000 14.0 125
(6,9) (355,6) (56,70)
1250 14.6 160
(8,6) (370,8) (72,58)
12 SSS x 8 5⁄8 1250 14.75 14.75 17.1 6.10 4.50 230
(8,6) (374,7) (374,7) (434,3) (154,9) (114,3) (104,33)
12 SSS x 8 SSS 1250 4.75 225
(8,6) (120,7) (102,06)
12 SSS x 10 SSS 1250 5.40 245
(8,6) (137,2) (111,13)

Reducing Bushing Pressure

Male x Female Thread Rating A B C X1 X2 Wt
Size psi In In In In In Lbs
Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)
2 7⁄8 x 1.90 2500 10.0 3.1 1.44 2.88 2.06 2.5
(17,2) (254,0) (78,7) (36,6) (73,0) (52,4) (1.13)
3 ½ x 1.90 3500 10.0 3.75 1.44 3.13 2.06 6
(24,1) (254,0) (95,3) (36,6) (79,4) (52,4) (2.72)
3 ½ x 2 3⁄8 2500 10.88 1.94 2.56 4
(17,2) (276,4) (49,3) (65,1) (1.81)
4 ½ x 1.90 3500 10.0 4.80 1.44 3.50 2.06 11
(24,1) (254,0) (121,9) (36,6) (88,9) (52,4) (4.99)
4 ½ x 2 3⁄8 4000 10.88 1.94 2.56 10
(27,6) (276,4) (49,3) (65,1) (4,54)
4 ½ x 2 7⁄8 3000 2.36 2.88 8.5
(20,7) (59,9) (73,0) (3,86)
4½x3½ 1000 10.88 4.80 2.95 3.50 3.13 6.0
(13,8) (276,4) (121,9) (74,9) (88,9) (79,4) (2,72)
5½ x 2-3⁄8 4000 10.88 5.55 1.94 4.38 2.56 16
(27,6) (276,4) (141,0) (49,3) (111,1) (65,1) (7,26)
5 ½ x 2 7⁄8 4000 2.36 2.88 14
(27,6) (59,9) (73,0) (6,35)
5½x3½ 4000 11.13 2.95 3.13 11.5
(27,6) (282,7) (74,9) (79,4) (5,22)
6 5⁄8 x 2 3⁄8 2000 10.88 6.65 1.95 3.88 2.56 27
(13,8) (276,4) (168,9) (49,5) (98,4) (65,1) (12,25)
6 5⁄8 x 2 7⁄8 2000 2.36 2.88 25
(13,8) (59,9) (73,0) (11,34)
6 5⁄8 x 3 ½ 2000 11.13 2.94 3.13 22
(13,8) (282,7) (74,7) (79,4) (9,98)
6 5⁄8 x 4 ½ 2000 3.95 3.50 16
(13,8) (100,3) (88,9) (7,26)
7x3½ 2500 11.13 7.10 2.95 4.50 3.13 24
(17,2) (282,7) (180,3) (74,9) (114,3) (79,4) (10,89)
7x4½ 2500 3.95 3.50 21
(17,2) (100,3) (88,9) (9,53)
8 5⁄8 x 4 ½ 1500 3.95 3.50 44
(10,3) (100,3) (88,9) (19,96)

19
 Pressure
Reducing Bushing Rating
Male x Female Thread A B C X1 X2 Wt
Size psi In In In In In Lbs
(continued)
Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)
8 5⁄8 x 6 5⁄8 1500 12.0 5.95 3.88 30
(10,3) (304,8) (151,1) (98,4) (13,61)
9 5⁄8 x 6 5⁄8 2000 11.98 9.65 38
(13.8) (304,3) (245,1) (17,24)
10 SSS x 6 5⁄8 1000 12.0 11.25 5.95 5.40 3.88 65
(13,8) (304,8) (285,8) (151,1) (137,2) (98,4) (29,48)
10 SSS x 8 5⁄8 1000 7.74 4.50 50
(13,8) (196,6) (114,3) (22,68)
10 SSS x 8SS 1000 7.74 4.75 50
(13,8) (196,6) (120,7) (22,68)
12 SSS x 8 5⁄8 1000 12.0 14.4 7.74 6.10 4.50 80
(13,8) (304,8) (365,8) (196,6) (154,9) (114,3) (36,28)
12 SSS x 8 SSS 1000 7.74 4.75 80
(13,8) (196,6) (120,7) (36,28)
12 SSS x 10 SSS 1000 11.81 5.40 70
(13,8) (300,0) (137,2) (31,77)

Reducing Coupling Pressure

Female x Female Thread Rating A B X1 X2
Size psi In In In In Wt
Inches (MPa) (mm) (mm) (mm) (mm) Lbs (kg)
2 3⁄8 x 1.90 4000 6.625 4.25 2.56 2.06 4
(27,6) (168,3) (108,0) (65,1) (52,4) (1,81)
2 7⁄8 x 1.90 4000 6.8 5.25 2.88 2.06 7
(27,6) (172,7) (133,4) (73,0) (52,4) (3,18)
2 7⁄8 x 2 3⁄8 2000 4.2 6.0
(13,8) (106,7) (8,93)
2 7⁄8 x 2 3⁄8 4000 7.2 2.56 8.5
(27,6) (182,9) (65,1) (3,86)
3 ½ x 1.90 4000 8.0 6.0 3.13 2.06 18
(27,6) (203,2) (152,4) (79,4) (52,4) (8,16)
3 ½ x 2 3⁄8 4000 2.56 13
(27,6) (65,1) (5,90)
3 ½ x 2 7⁄8 4000 2.88 12
(27,6) (73,0) (5,44)
4 ½ x 1.90 4000 10.125 7.45 3.50 2.06 28
(27,6) (257,2) (189,2) (88,9) (52,4) (12,70)
4 ½ x 2 3⁄8 4000 2.56 24
(27,6) (65,1) (10,89)
4 ½ x 2 7⁄8 4000 10.375 2.88 26
(27,6) (263,5) (73,0) (11,79)
4½x3½ 4000 10.125 3.13 20
(27,6) (257,2) (79,4) (9,07)
5 ½ x 2 3⁄8 4000 10.375 8.7 4.38 2.56 38
(27,6) (263,5) (221,0) (111,1) (65,1) (17,24)
5 ½ x 2 7⁄8 4000 8.5 2.88 30
(27,6) (215,9) (73,0) (13,61)
5½x3½ 4000 3.13 34
(27,6) (79,4) (15,42)
5½x4½ 4000 3.50 30
(27,6) (88,9) (13,61)
6 5⁄8 x 3 ½ 2000 15.0 8.5 3.88 3.13 37
(13,8) (381,0) (215,9) (98,4) (79,4) (16,78)
6 5⁄8 x 4 ½ 2000 3.50 34
(13,8) (88,9) (15,42)
20
 Pressure
Reducing Coupling
Thread Rating A B X1 X2 Wt
Female x Female
Size psi In In In In Lbs
(continued)
Inches (MPa) (mm) (mm) (mm) (mm) (kg)
7x4½ 2500 15.0 9.5 4.50 3.50 44
(17,2) (381,0) (241,3) (114,3) (88,9) (19,96)
7x5½ 2500 4.38 40
(17,2) (111,1) (18,14)
8 5⁄8 x 4 ½ 1500 15.0 10.3 4.50 3.50 55
(10,3) (381,0) (261,6) (114,3) (88,9) (24,95)
8 5⁄8 x 6 5⁄8 1500 13.0 3.88 45
(10,3) (330,2) (98,4) (20,41)
8 5⁄8 x 7 1500 15.0 4.50 39
(10,3) (381,0) (114,3) (17,69)
9 5⁄8 x 4 ½ 2000 15.0 12.2 4.75 3.50 88
(13,8) (381,0) (309,9) (120,7) (88,9) (39,92)
9 5⁄8 x 7 2000 4.50 76
(13,8) (114,3) (34,47)
9 5⁄8 x 8 5⁄8 1500 4.50 58
(10,3) (114,3) (26,31)
8SS x 4 ½ 1250 16.5 10.0 6.10 3.50 57
(8,6) (419,1) (254,0) (154,9) (88,9) (84,8)
8SS x 6 5⁄8 1250 14.5 3.88 47
(8,6) (368,3) (98,4) (69,8)
10 SSS x 6 5⁄8 1250 19.5 13.8 5.40 3.88 68
(8,6) (495,3) (350,5) (137,2) (98,4) (30,84)
10 SSS x 8 5⁄8 1250 4.50 63
(8,6) (114,3) (28,58)
10 SSS x 8SS 1250 15.0 4.75 50
(8,6) (381,0) (120,7) (22,68)
12 SSS x 8 5⁄8 1250 18.3 16.0 6.10 4.50 90
(8,6) (464,8) (406,4) (154,9) (114,3) (40,82)
12 SSS x 9 5⁄8 1250 20.5 90
(8,6) (520,7) (40,82)
12 SSS x 8 SSS 1250 19.5 4.75 90
(8,6) (495,3) (120,7) (40,82)
12 SSS x 10 SSS 1250 16.0 5.40 75
(8,6) (406,4) (137,2) (34,02)

Swage Nipples Pressure

Male x Male Thread Rating A B C X1 X2 Wt
Size psi In In In In In Lbs
Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)

2 3⁄8 x 1.90 2500 12.0 2.60 1.50 2.56 2.06 3.0

(17,2) (304,8) (66,0) (38,1) (65,1) (52,4) (1,36)
2 7⁄8 x 1.90 3500 12.0 3.10 1.50 2.88 2.06 4.5
(24,1) (304,8) (78,7) (38,1) (73,0) (52,4) (2,04)
2 7⁄8 x 2 3⁄8 2500 2.00 2.56 3.5
(17,2) (50,8) (65,1) (1,59)
2 7⁄8 x 2 3⁄8 3500 3.5
(24,1) (1,59)
3 ½ x 1.90 3500 12.0 3.75 1.50 3.13 2.06 8.0
(24,1) (304,8) (95,3) (38,1) (79,4) (52,4) (3,63)
3 ½ x 2 3⁄8 3500 2.00 2.56 5.5
(24,1) (50,8) (65,1) (2,49)
3 ½ x 2 7⁄8 3000 2.43 2.88 4.5
(20,7) (61,7) (73,0) (2,04)

21
 Pressure
Swage Nipples Rating
Male x Male Thread A B C X1 X2 Wt
Size psi In In In In In Lbs
(continued) Inches (MPa) (mm) (mm) (mm) (mm) (mm) (kg)

4 ½ x 2 3⁄8 3500 14.0 4.8 2.00 3.50 2.56 14.0

(24,1) (355,6) (121,9) (50,8) (88,9) (65,1) (6,35)
4 ½ x 2 7⁄8 3500 2.43 2.88 12.0
(24,1) (61,7) (73,0) (5,44)
4½x3½ 3000 4.71 3.00 3.13 10.0
(20,7) (119,6) (76,2) (79,4) (4,54)
5½x3½ 3000 16 5.55 3.00 4.38 3.13 18.0
(20,7) (406,4) (140,8) (76,2) (111,1) (79,4) (8,16)
5½x4½ 2000 3.90 3.50 12.0
(13,8) (99,1) (88,9) (5,44)
6 5⁄8 x 3 ½ 2000 16 6.65 3.00 3.88 3.13 28
(13,8) (406,4) (168,9) (76,2) (98,4) (79,4) (12,70)
6 5⁄8 x 4 ½ 2000 3.90 3.50 26
(13,8) (99,1) (88,9) (11,79)
6 5⁄8 x 5 ½ 2000 4.74 4.38 20
(13,8) (120,4) (111,1) (9,07)
7x4½ 2000 16.0 7.05 3.90 4.50 3.50 28
(13,8) (406,4) (179,1) (99,1) (114,3) (88,9) (12,70)
7x5½ 2000 4.74 4.38 21
(13,8) (120,4) (111,1) (9,53)
7 x 6 5⁄8 1000 5.85 3.88 15
(6,9) (148,6) (98,4) (6,80)
7 x 6 5⁄8 2000 5.85 3.88 18.5
(13,8) (148,6) (98,4) (8,39)
8 5⁄8 x 5 ½ 1500 17.0 8.65 4.74 4.50 4.38 45
(10,3) (431,8) (219,7) (120,4) (114,3) (111,1) (20,41)
8 5⁄8 x 6 5⁄8 1000 5.85 3.88 40
(6,9) (148,6) (98,4) (18,14)
8 5⁄8 x 6 5⁄8 2000 5.50 3.88 44
(13,8) (139,7) (98,4) (19,96)
8 5⁄8 x 7 1500 5.85 4.50 40
(10,3) (148,6) (114,3) (18,14)
9 5⁄8 x 6 5⁄8 1000 16.0 9.65 5.85 4.75 3.88 35
(6,9) (406,4) (245,1) (148,6) (120,7) (98,4) (15,88)
9 5⁄8 x 6 5⁄8 2000 5.50 3.88 41
(13,8) (139,7) (98,4) (18,60)
9 5⁄8 x 7 2000 17.0 5.85 4.50 50
(13,8) (431,8) (148,6) (114,3) (22,68)
9 5⁄8 x 8 5⁄8 1250 18.0 9.44 7.50 4.50 31
(8,6) (457,2) (239,8) (190,5) (114,3) (14,06)
10 SSS x 6 5⁄8 1200 17.0 11.25 5.93 5.40 3.88 80
(8,2) (431,8) (285,8) (150,6) (137,2) (98,4) (36,29)
10 SSS x 8 5⁄8 1200 7.74 4.50 55
(8,2) (196,6) (114,3) (24,95)
10 SSS x 8 SSS 1200 4.75 55
(8,2) (120,7) (24,95)
12 SSS x 8 5⁄8 1200 18.0 13.25 7.74 6.10 4.50 100
(8,2) (457,2) (336,6) (196,6) (154,9) (114,3) (45,36)
12 SSS x 8 SSS 1200 7.74 4.75 100
(8,2) (196,6) (120,7) (45,36)
12 SSS x 10 SSS 1200 9.84 5.40 65
(8,2) (249,9) (137,2) (29,48)

22
Threaded Couplings Thread Pressure
Female x Female Size Rating A B X1 Wt
Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)

1.90 2000 (13,8) 5.125 (130,2) 2.80 (71,1) 2.06 (52,4) 1.1 (0,50)
2500 (17,2) 2.90 (73,7) 1.2 (0,54)
3000 (20,7) 3.00 (76,2) 1.4 (0,64)
3500 (24,1) 3.15 (80,0) 1.6 (0,74)
4000 (27,6) 3.30 (83,8) 1.9 (0,87)
2 ⁄8
3
1500 (10,3) 6.126 (155,6) 3.25 (82,6) 2.56 (65,1) 1.4 (0,64)
2000 (13,8) 3.40 (86,4) 1.8 (0,80)
2500 (17,2) 3.60 (91,4) 2.2 (1,02)
3000 (20,7) 3.70 (94,0) 2.5 (1,13)
3500 (24,1) 3.90 (99,1) 3.0 (1,37)
4000 (27,6) 4.10 (104,1) 3.6 (1,61)
2 7⁄8 1500 (10,3) 6.750 (171,5) 3.80 (96,5) 2.88 (73,0) 2.0 (0,91)
2000 (13,8) 4.00 (101,6) 2.6 (1,17)
2500 (17,2) 4.20 (106,7) 3.2 (1,45)
3000 (20,7) 4.40 (111,8) 3.9 (1,75)
3500 (24,1) 4.60 (116,8) 4.5 (2,05)
4000 (27,6) 4.80 (121,9) 5.2 (2,37)
3½ 1500 (10,3) 7.250 (184,2) 4.60 (116,8) 3.13 (79,4) 3.1 (1,41)
2000 (13,8) 4.80 (121,9) 3.9 (1,76)
2500 (17,2) 5.10 (129,5) 5.1 (2,30)
3000 (20,7) 5.25 (133,4) 5.7 (2,58)
3500 (24,1) 5.50 (139,7) 6.8 (3,08)
4000 (27,6) 5.75 (146,1) 7.9 (3,59)
4 1500 (10,3) 8.750 (222,3) 5.00 (127,0) 3.88 (98,4) 3.5 (1,59)
2000 (13,8) 5.25 (133,4) 4.8 (2,16)
2500 (17,2) 5.55 (141,0) 6.3 (2,88)
3000 (20,7) 5.80 (147,3) 7.7 (3,50)
4½ 1500 (10,3) 8.000 (203,2) 5.80 (147,3) 3.50 (88,9) 5.3 (2,39)
2000 (13,8) 6.10 (154,9) 6.9 (3,11)
2500 (17,2) 6.40 (162,6) 8.5 (3,86)
3000 (20,7) 6.70 (170,2) 10.3 (4,66)
3500 (24,1) 7.00 (177,8) 12.1 (5,49)
4000 (27,6) 7.20 (182,9) 13.4 (6,07)

23
Threaded Couplings Thread Pressure
Female x Female Size Rating A B X1 Wt
(continued) Inches psi (MPa) In (mm) In (mm) In (mm) Lbs (kg)

5½ 1000 (6,9) 9.750 (247,7) 6.25 (158,8) 4.38 (111,1) 5.5 (2,51)
1250 (8,6) 6.45 (163,8) 6.9 (3,14)
1500 (10,3) 6.60 (167,6) 8.0 (3,62)
1750 (12,1) 6.75 (171,5) 9.1 (4,13)
2000 (13,8) 7.00 (177,8) 10.9 (4,96)
2500 (17,2) 7.30 (185,4) 13.3 (6,02)
3000 (20,7) 7.60 (193,0) 15.7 (7,13)
3500 (24,1) 7.90 (200,7) 18.2 (8,27)
4000 (27,6) 8.20 (208,3) 20.9 (9,46)
6 ⁄8
5
800 (5,5) 8.75 (222,3) 7.35 (186,7) 3.88 (98,4) 5.6 (2,55)
1000 (6,9) 7.55 (191,8) 7.1 (3,21)
1250 (8,6) 7.70 (195,6) 8.2 (3,71)
1500 (10,3) 7.90 (200,7) 9.7 (4,40)
2000 (13,8) 8.25 (209,6) 12.5 (5,66)
2500 (17,2) 8.70 (221,0) 16.2 (7,34)
7 800 (5,5) 10.00 (254,0) 7.85 (199,4) 4.50 (114,3) 7.7 (3,48)
1000 (6,9) 8.00 (203,2) 9.0 (4,09)
1250 (8,6) 8.20 (208,3) 10.8 (4,91)
1500 (10,3) 8.40 (213,4) 12.7 (5,75)
2000 (13,8) 8.75 (222,3) 16.0 (7,26)
2500 (17,2) 9.20 (233,7) 20.5 (9,31)
8 5⁄8 800 (5,5) 10.00 (254,0) 9.50 (241,3) 4.50 (114,3) 9.9 (4,47)
1000 (6,9) 9.70 (246,4) 12.0 (5,44)
1250 (8,6) 10.00 (254,0) 15.3 (6,93)
1500 (10,3) 10.20 (259,1) 17.5 (7,96)
9 ⁄8
5
800 (5,5) 10.50 (266,7) 10.70 (271,8) 4.75 (120,7) 13.5 (6,12)
1000 (6,9) 10.90 (276,9) 16.7 (7,57)
1250 (8,6) 11.10 (281,9) 19.3 (8,74)
1500 (10,3) 11.50 (292,1) 24.6 (11,14)
2000 (13,8) 11.90 (302,3) 30.0 (13,63)
8 SSS 800 (5,5) 10 (254,0) 9.60 (243,8) 4.75 (120,7) 9.0 (4,08)
1250 (8,6) 10.20 (259,1) 15.0 (6,80)
10 SSS 800 (5,5) 11.375 (288,9) 12.8 (325,1) 5.40 (137,2) 18.0 (8,16)
1250 (8,6) 13.6 (345,4) 30.0 (13,61)
12 SSS 800 (5,5) 12.2 (309,9) 14.8 (375,9) 6.10 (154,9) 26.0 (11,79)
1250 (8,6) 15.7 (398,8) 42.0 (19,05)

24
Threaded Adapter Pipe
Bonded Bell x Male Thread Pressure
Size Rating A B X1 X2 Wt Anhydride Aliphatic Aromatic
In In In In Lbs
Inches psi (MPa) (mm) (mm (mm) (mm) (kg) STD 15HR STD 15HR 15HR
1.90 1250 (8,6) 4.25 2.15 4.00 2.36 0.6 N/A R N/A N/A N/A
(108,0) (54,6) (101,6) (59,9) (0,27)
1500 (10,3) R R R R R
1750 (12,1) R R R R Q
2000 (13,8) R Q R R Q
2250 (15,5) R Q R Q S
2500 (17,2) Q S R P N/A
2 3⁄8 750 (5,2) 5.00 2.71 4.75 2.56 0.9 N/A S N/A R N/A
(127,0) (68,8) (120,7) (65,1) (0,41)
800 (5,5) N/A N/A R N/A N/A
1000 (6,9) N/A S R R S
1250 (8,6) S S R R S
1500 (10,3) S S R R S
1750 (12,1) S S R S Q
2000 (13,8) S Q R Q P
2250 (15,5) Q P R P N/A
2500 (17,2) Q P S N/A Q
2 7⁄8 750 (5,2) 5.25 3.21 5.00 2.88 1.2 N/A T N/A U T
(133,4) (81,5) (127,0) (73,0) (0,54)
800 (5,5) N/A N/A U N/A N/A
1000 (6,9) T T U U T
1250 (8,6) T T U U T
1500 (10,3) T T U T Q
1750 (12,1) T S U S Q
2000 (13,8) S Q U Q N/A
2250 (15,5) Q Q T Q N/A
2500 (17,2) Q N/A R Q Q
3 1⁄2 500 (3,5) 5.50 3.89 5.25 3.13 1.6 N/A T U U T
(139,7) (98,8) (133,4) (79,4) (0,73)
750 (5,2) N/A T N/A U T
800 (5,5) T N/A U N/A N/A
1000 (6,9) T T U U T
1250 (8,6) T T U U S
1500 (10,3) T S U S S
1750 (12,1) T S U S Q
2000 (13,8) S R S R P
2250 (15,5) S Q S R S
2500 (17,2) R P R Q S
4 1⁄2 500 (3,5) 5.75 4.89 5.50 3.50 2.4 T T U U T
(146,1) (124,2) (139,7) (88,9) (1,09)
750 (5,2) N/A T N/A U T
800 (5,5) T N/A U N/A N/A
1000 (6,9) T T U U S
1250 (8,6) T S U T R
1500 (10,3) S R T R Q
1750 (12,1) S R S Q P
2000 (13,8) R P R P Q

25
Threaded Adapter Pipe
Bonded Bell x Male Thread Pressure
(continued) Size Rating A B X1 X2 Wt Anhydride Aliphatic Aromatic
In In In In Lbs
Inches psi (MPa) (mm) (mm) (mm) (mm) (kg) STD 15HR STD 15HR 15HR
TC
5 1⁄2 500 (3,5) 6.75 5.55 6.50 4.38 3.2 R R R N/A N/A
(171,5) (141,0) (165,1) (111,1) (1,45)
750 (5,2) N/A R N/A N/A R
800 (5,5) R N/A R N/A N/A
1000 (6,9) R R R N/A Q
1250 (8,6) R Q R N/A P
1500 (10,3) Q P T N/A N/A
6 5⁄8 500 (3,5) 6.25 6.77 6.00 3.88 3.5 V V S S V
(158,8) (172,0) (152,4) (98,4) (2,40)
750* (5,2) N/A V N/A U S
(5.50 ID)
*IMPORTANT NOTICE N/A S
It is important to know the (5.93 ID)
ID before ordering 6 5⁄8“
Threaded Adapters. 800* (5,5) V N/A U N/A N/A
(5.50 ID)
S
(5.93 ID)
1000* (6,9) V S U T Q
(5.50 ID) (5.50 ID)
R R
(5.93 ID) (5.93 ID)
1250 (8,6) S Q T N/A V
8 5⁄8 500 (3,5) 6.88 8.77 6.63 4.50 5.3 U U S S U
(174,8) (222,8) (168,4) (114,3) (2,40)
750 (5,2) N/A U N/A R T
800 (5,5) U N/A S N/A N/A
1000 (6,9) T S R N/A R
8 SSS 500 (3,5) 8.00 8.79 8.00 4.75 7.5 N/A N/A R N/A N/A
(203,2) (223,3) (203,2) (120,7) (3,42)
800 (5,5) N/A N/A R N/A N/A
10 SSS 500 (3,5) 10.0 11.27 7.00 5.40 8.7 N/A N/A R N/A N/A
(254,0) (286,3) (177,8) (137,2) (3,93)
12 SSS 500 (3,5) 10.0 13.25 7.00 6.10 21.5 N/A N/A R N/A N/A
(254,0) (337,1) (177,8) (154,9) (9,74)

Sleeve Coupling Pipe

Bonded Bell x Bonded Bell
Thread Pressure
Size Rating A B X1 Wt Anhydride Aliphatic Aromatic
In In In Lbs
Inches psi (MPa) (mm) (mm) (mm) (kg) STD 15HR STD 15HR 15HR
1.90 1250 (8,6) 18.0 2.20 3.00 2.6 N/A R N/A N/A N/A
(457,2) (55,9) (76,2) (1,2)
1500 (10,3) R R R R R
1750 (12,1) R R R R Q
2000 (13,8) R Q R R Q
2 ⁄8 3
750 (5,2) 18.0 3.00 3.75 5.0 N/A S N/A R N/A
(457,2) (76,2) (95,3) (2,3)
800 (5,5) N/A N/A R N/A N/A
1000 (6,9) N/A S R R S
1250 (8,6) S S R R S
1500 (10,3) S S R R S
1750 (12,1) S S R S Q
2000 (13,8) S Q R Q P

26
Sleeve Coupling Pipe
Bonded Bell x Bonded Bell Thread Pressure
(continued) Size Rating A B X1 Wt Anhydride Aliphatic Aromatic
In In In Lbs
Inches psi (MPa) (mm) (mm) (mm) (kg) STD 15HR STD 15HR 15HR
2 7⁄8 750 (5,2) 18.0 3.65 4.00 7.4 N/A T N/A U T
(457,2) (92,7) (101,6) (3,4)
800 (5,5) N/A N/A U N/A N/A
1000 (6,9) T T U U T
1250 (8,6) T T U U T
1500 (10,3) T T U T Q
1750 (12,1) T S U S Q
2000 (13,8) S Q U Q N/A
3 1⁄2 500 (3,5) 18.0 4.50 4.25 11.3 N/A T U U T
(457,2) (114,3) (114,3) (5,1)
750 (5,2) N/A T N/A U T
800 (5,5) T N/A U N/A N/A
1000 (6,9) T T U U T
1250 (8,6) T T U U S
1500 (10,3) T S U S S
4 1⁄2 500 (3,5) 18.0 5.75 4.50 17.8 T T U U T
(457,2) (146,1) (114,3) (8,1)
750 (5,2) N/A T N/A U T
800 (5,5) T N/A U N/A N/A
1000 (6,9) T T U T S
1250 (8,6) T S U S R
TC
5 1⁄2 500 (3,5) 18.0 7.50 5.50 33.8 R R R N/A N/A
(457,1) (190,5) (139,7) (15,3)
750 (5,2) N/A R N/A N/A R
800 (5,5) R N/A R N/A N/A
1000 (6,9) R R R N/A Q
1250 (8,6) R Q R N/A P
6 5⁄8 500 (3,5) 18.0 7.65 5.00 24.3 V V S S V
(457,2) (194,3) (127,0) (11,0)
750* (5,2) N/A V N/A U S
(5.50 ID) (5.50 ID)
750* (5,2) N/A S
(5.93 ID) (5.93 ID)
*IMPORTANT NOTICE 800* (5.5) V N/A U N/A N/A
It is important to know (5.50 ID) (5.93 ID)
the ID before ordering 800* (5,5) S N/A
6 5⁄8” Sleeve Couplings.
(5.93 ID) (5.93 ID)
1000* V S U U Q
(5.50 ID) (5.50 ID)
1000* S R
(5.93 ID) (5.93 ID)
1250 S Q V
8 5⁄8 500 18.0 10.0 5.38 43.7 U U S S U
(457,2) (254,0) (136,7) (19,8)
750 N/A U N/A S T
800 U N/A S N/A N/A

27
Sleeve Coupling Pipe
Bonded Bell x Bonded Bell Thread Pressure
(continued) Size Rating A B X1 Wt Anhydride Aliphatic Aromatic
In In In Lbs
Inches psi (MPa) (mm) (mm) (mm) (kg) STD 15HR STD 15HR 15HR
8 SSS 500 (3,5) 8.00 8.79 8.00 7.5 N/A N/A R N/A N/A
(203,2) (223,3) (203,2) (3,42)
800 (5,5) N/A N/A R N/A N/A

10 SSS 500 (3,5) 10.0 11.27 7.00 8.7 N/A N/A R N/A N/A
(254,0) (286,3) (177,8) (3,93)
12 SSS 500 (3,5) 10.0 13.25 7.00 21.5 N/A N/A R N/A N/A
(254,0) (337,1) (177,8) (9,74)

National Oilwell Varco has produced this brochure for general information only, and it is
not intended for design purposes. Although every effort has been made to maintain the
accuracy and reliability of its contents, National Oilwell Varco in no way assumes respon-
sibility for liability for any loss, damage or injury resulting from the use of information and
data herein nor is any warranty expressed or implied. Always cross-reference the bulletin
date with the most current version listed at the web site noted in this literature.

North America South America Europe Asia Pacific Middle East

17115 San Pedro Ave. Suite 200 Estrada de Acesso á Zona P.O. Box 6, 4190 CA No. 7A, Tuas Avenue 3 P.O. Box 17324
San Antonio, Texas 78232 USA Industrial Portuária de Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore 639407 Dubai, UAE
Phone: 210 477 7500 Recife, PE, Brazil 55.590-000 Phone: 31 346 587 587 Phone: 65 6861 6118 Phone: 971 4881 3566
Phone: 55 31 3501 0023

www.fgspipe.com • [email protected]

© 2015, National Oilwell Varco

OG8050 June 2015