Scribd
Upload
207 views1 page

PAB 831 Industrial Concrete Products: Perunding Bakti

The document provides calculations for the design of a floor slab for a single storey warehouse. It specifies the concrete grade as 40 MPa, rebar grade as 460 MPa, and nominal cover as 20 mm. The calculations determine that the 300 mm thick slab has a 1 hour fire resistance rating. It then calculates the characteristic dead and imposed loads and resulting design load. Using tables, it determines the ultimate bending moments at midspan and supports. Based on the moments, it calculates the required reinforcement as top and bottom T12 bars at 125 mm spacing, providing 772 mm^2/m of steel. Additional checks confirm the shear capacity and deflection are within code limits. Crack control and bar spacing requirements are also satisfied.

Uploaded by

tini871
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
207 views1 page

PAB 831 Industrial Concrete Products: Perunding Bakti

The document provides calculations for the design of a floor slab for a single storey warehouse. It specifies the concrete grade as 40 MPa, rebar grade as 460 MPa, and nominal cover as 20 mm. The calculations determine that the 300 mm thick slab has a 1 hour fire resistance rating. It then calculates the characteristic dead and imposed loads and resulting design load. Using tables, it determines the ultimate bending moments at midspan and supports. Based on the moments, it calculates the required reinforcement as top and bottom T12 bars at 125 mm spacing, providing 772 mm^2/m of steel. Additional checks confirm the shear capacity and deflection are within code limits. Crack control and bar spacing requirements are also satisfied.

Uploaded by

tini871
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Part: Floor Slab Page: 1 of 1

PERUNDING ALAM BAKTI


Single Storey Warehouse Rev:
Project No: PAB 831 Date: 28-Jan-19
Client : Industrial Concrete Products Designed By : Tini Checked By : Ir.Harry

BS 8110 ref. CALCULATIONS OUTPUT

fcu = 40 fy = 460

300mm
3000mm

Table 3.4 DURABILITY and FIRE RESISTANCE


Nominal cover for mild condition of exposure = 20 mm Cover = 20mm
Max. fire resistance of 300mm slab with 20 = 1.5 hr > 1 hr 1 hr fire resistance OK!
cover
LOADING
Self-weight 0.300 x 24 = 7.2
Finishes = 2
Characteristic dead load = 9.2 kN/m2 gk = 9.2kN/m2
3.5.2.4 Characteristic imposed load = 11 kN/m2 qk = 5 kN/m2
Table 3.12 Design Load = (1.4x9.2 + 1.6x11) x 19 = 579.12 kN/m width F= 62.64 kN/m width
3.5.2.4 ULTIMATE BENDING MONENTS
Table 3.12 Interior mid-span 0.063FL = 0.063 x 125.28 x 3 = 23.7 kNm/m
and supports
REINFORCEMENT d= 150 mm
3.4.4.4 Interior mid-span K = M = 23.7 x 10^6 = 0.053
and supports fcubd2 40x10^3x150^2

z = 150 (0.5 +√(0.25 - 0.053/0.9) = 140.6 (but < 0.685d = 142.5) Top & Bottom
x = (d-z) / 0.45 = (150-140.6)/0.45 = 21 T12@125
(905mm2/m)
As = M = 47.4 x 10^6 = 772 mm2/m
0.95fyz 0.95x460x140.6

Check for shear :


Table 3.8 v = 0.5 x 125.28 x 10^3 = 0.42 N/mm2 < vc OK!
10^3 x 150
3.4.6 DEFLECTION basic span/eff. Depth ratio = 26 Max.
Table 3.9 M = 47.4 x 10^6 = 2.11
bd2 10^3 x 150^2
fs = 2 x 460 x 772 = 261.6 N/mm2
3 x 905
Table 3.10 Modification factor for tension reinf's. = 1.2
Allowable span/eff. Depth ratio = 26 x 1.2 = 31.2
Actual span/eff. Depth ratio = 3000/150 = 20 L/d Ratio OK!
3.12.11.2.7 CRACKING 3d = 3 x 150 = 450.00
Spacing between bars = 125-12 = 113mm < 3d Spacing OK!

You might also like