Electrical Measurement and Testing
Electrical Measurement and Testing
Electrical Measurement and Testing
MEASUREMENT AND
TESTING
ASSIGNMENT
Product description:
An analogue MR-100 meter of range 0-20-100 µA, which
can either, be used as a current meter or voltmeter on introducing
shunts or multiplier with this meter respectively. Internal coil
resistance of the meter is 1K. For better viewing angle meter is
fixed inside a tapered plastic moulded case. Connections are made
via 4mm safety terminals.
Specifications:
Ranges: 0-20-100 µA
Additional Information:
Item Code PHIAA670
Product description:
Frey Scientific Galvanometer with -500 - 0 - 500 uA DC
specifications is a full size student bench meter delivering ±2.5%
accuracy and overload protection at exceptionally low cost.
Galvanometer features large 3 in scales designed for external
zero-adjust calibration. Galvanometer with an inclined meter
face is mounted in a durable, fully enclosed plastic case.
Product description:
Tekpower TP204 Galvanometer, (-50) -0 - (+50), (-100)
- 0- (+100), at 100m
1
Product description:
Product Data
Weight 0.199 kg
Brand PeakTech
Product description:
2
AMMETER
Product description:
Product description:
AD105A True RMS Digital Ammeter
■ Broad range 1000 A, AC and DC ammeter
■ True-RMS
■ Frequency measurement using clamp jaws
■ Peak Hold and DC Auto Zero
■ Autoranging
■ 4000-count
■ Belt-clip sleeve case included
General Specifications
Display: 3-3⁄4 digit LCD (max reading 3999)
Display Update Rate: 2/sec;
Overrange Indication: “OL” indicated
Low Battery Indication: Battery symbol appears when battery power is
low
Power Supply One 9 V battery (NEDA 1604, IEC 6F22)
Battery Life: Alkaline 40 hours, approx.
Maximum Jaw Opening: 51 mm
Maximum Conductor Size: 51 mm (2 inches)
Operating Temperature: 0 °C to +50 °C, < 75 % R.H. non-condensing
Storage Temperature: -20 °C to +60 °C, < 80 % R.H. non-condensing,
batteries removed
Temperature Coefficient: 0.2 x (Spec. Acc’y), < 18 °C or >28 °C
Dimensions (WxHxD): 240 x 106 x 40 mm
Weight: 420 g (incl. Battery)
3
Product description:
We are instrumental in supplying and exporting an extensive range of
Ammeter, which is used to measure the current flow in amperes and
display current levels. In order to help users troubleshoot erratic loads,
this equipment provides information about current draw and current
continuity. Our valuable clients can avail these products from us at
completely affordable rates.
Technical Specifications
Product description:
Uxcell a11022500ux0025 85C1-A Analog Current Panel
Meter DC 30A Ammeter Ampere Tester Gauge
Made of good quality plastic material and finished by good
technology
Measures amper range of 1-30A with accuracy of Class 25
Clear and easy to read scale and a button for fine tuning
the dial
Needle Ampere Panel Meter for electronic applications, auto
circuit or other Voltage measurement devices.
Note: this ammeter need to work with a 30A/75mV shunt,
which is not included here.
Product description:
Keithley Series 6400 Picoammeters
4
VOLTMETER
Product description:
Fluke 87V Industrial Multimeter
The Fluke 87V Industrial Multimeter provides the resolution and accuracy
to efficiently troubleshoot motor drives, plant automation, power
distribution, and electromechanical equipment even in loud, high energy,
and high altitude locations. A low pass filter supports accurate frequency
measurements on VFDs and captures intermittents as fast 250 µS.
Use the 87V to measure AC current up to 10 A directly, or use an optional
clamp for high current measurements.frequency to 200 kHz, plus % duty
cycle, resistance, continuity and diode test. And it includes a built-in
thermometer so you can take temperature readings without having to
carry a separate instrument, and more. Plus, with its bright, two-level
backlit display you’ll be able to see the results better in dim light.
Key features
Rugged, high accuracy industrial multimeter to measure current, voltage
and frequency on complex variable frequency drive (VFD) signals
Offers true-RMS AC voltage and current for measuring non-linear signals
Captures intermittents as short as 250 µS
Safety rated CAT III 1000 V, CAT IV 600 V
Includes a built-in thermometer and temperature probe
Specifications
Maximum resolution 10 µV
Voltage AC
20 kHz with low pass filter; 3 db
AC bandwidth
@ 1 kHz
Current DC
Amps accuracy ±(0.2% + 2)
Product description:
Features:
- Portable handheld size, easy to carry
- Universal digital multimeter, wildly useful and versatile
- Large LCD display screen, easy to read
- Strong anti-interference ability
- Auto power off after 15 minutes of inactivity
- Be used to measure AC / DC current, resistance, continuity, diode, etc.
Specifications:
- Brand: BSIDE
- Model: ZT302
- Material: ABS
- Battery type: 2 x 1.5V AAA battery (not included)
- Update rate: 3 times / second
- LCD: 9999 counts
- Resistance: 99.99 ohm - 9.999M ohm + / - (0.5pct + 3)
- Capacitance: 9.999nF - 9.999mF + / - (2.0pct + 5)
- Frequency: 99.99Hz - 9.999MHz + / - (0.1pct + 2)
- Ranging: auto / manual
- Operating temperature: 0 - 40 degree
- Storage temperature: -20 - 60 degree
- True rms: yes
- Diode: yes
- Continuity: yes
- Low battery display: Yes
6
Product description:
Product description:
Main Features:
Technology Parameters:
LCD screen size : 35x14mm
Max. Display: 1999
DC Voltage: 200m-2000m-20-200-400V ±0.5%
AC Voltage: 200-400V ±1.0%
DC Current: 2000u-20m-200mA ±1.8%
Resistance : 200-2000-20k-200k-2000kΩ ±1.0%
7
OHMMETER
Product description:
DLRO10HD
DLRO10HD - DUAL POWER 10A LOW RESISTANCE OHMMETER
High or low output power selection for condition diagnosis
Equally at home in the laboratory, the workshop or in the field, on the bench or on the ground, Megger’s
new heavy duty DLRO10HD low resistance ohmmeter combines rugged construction with accuracy and
ease of use. It features an internal rechargeable battery and can also operate from a mains supply, even if
the battery is completely flat.
Product description:
8
Product description:
Specification:
1. DC voltage: 600mV-6V - 60V - 600V - 1000V
2. AC voltage: 600mV-6V-60V - 600V-750V
3. AC current: 6uA-600uA-6000uA-60mA-600mA-20A
4. DC current:6uA-600uA-6000uA-60mA-600mA-20A
5.Resistance: 600ohm - 6k ohm - 60k ohm - 600k ohm- 6M
ohm-60M ohm
6. Overload Protection:Yes
7. Diode test: Yes
8. Max. display: 5999
9. Battery: 9V Battery 6F22( Not included )
10. Product Size(L x W x H):208 x 79 x 36mm
11. Working temperature: 18 ℃ ~ 28 ℃
12. Storage temperature: -10 ℃ ~ 50 ℃
Product description:
VoltMeter Ohmmeter Multimeter XL830L Digital LCD
It is easy to operate and the readings indicated directly on the screen.
Designed for perfect fit.
It can be use to overhaul all kinds of circuit boards. It is also an ideal
teaching instrument for students.
15mm high LCD Display.
The Digital Multimeter is a practical tool for electrician use.
High quality 100% brand new.
Max display: 1999, Auto polarity display.
Portable and compact design, overload protection on all ranges.
Diode assembly test/Transistor P-N junction test/Transistor HFE test.
Continuity test with buzzer sound in circuit.
Low battery voltage indication.
Fuse protection: F-200mA/250V.
Overrange Indication: Only figure "1" on the display.
Polarity Indication: "-" displayed for negative polarity.
Low Battery Indication: - /+ display.
Battery: 9V (Battery not include).
Dimension: Approx 138mm x 69mm x 31mm.
9
FREQUENCY METER
Product description:
Features
Its long scale length and numerous calibration marks provide high resolution.
This is particularly useful when measuring frequency differences or small
frequency changes.
Description
Product description:
Features:
Measuring AC/DC Voltage, current, resistance, temperature, frequency,
capacitance, continuity buzzer and hFE
K-type thermocouple probe
LCD displpay with a max. reading of 1999 counts
Overrange indication
Auto power off
Low battery indication
Low voltage symbol display
Specifications:
DCV: 200mV ±0.5%; 2-20-200V ±0.8% ; 1000V ±1.0%
ACV: 200mV ±1.2%; 2-20-200V ±1.0% ; 750V ±1.2%
DCA: 20u-200u-2000u-20mA ±1.8%; 200mA ±2.0%; 2-20A ±2.0%
ACA: 20uA ±2.0%; 200u-2m-20m-200mA ±2.0% 2-20A ±2.5%
OHM: 200-2K-20K-200K-2M-20M ±1.0%
Cap: 2000p-20n-200n-2u-20uF ±4.0%
Fre.: 2K-20KHZ ±3.0%
Temperature: -40~1370℃ ±2.5%
Transistor hFE Test: PNP & NPN 0-1000
Resistance: 200Ω ±1.0%; 2K-20K-200K-2M-20MΩ ±1.0%; 200MΩ ±5%
10
Product description:
GY560 Frequency Counter Meter for Two Way Radio Transceiver GSM 50
MHz-2.4 GHz
Features:
100% Brand New and High Quality
Frequency Counter for two-way radio and mobile phone
Frequency Range: 50Mhz to 2.4Ghz
Frequency step : 200K (digital radio signal), 1K, 100Hz
Distance covered: 8m for U-band and 5m for V-band
Battery: 9V (included)
Color: As the pictures shown
Antenna: pulling out antenna
Dimensions: 9.4cm x 5.7cm x 2.3cm / 3.7” x 2.2”
x 0.9”
Auto switch off
Single button control
With collapsible whip antenna
7 DIGIT LCD Display with signal meter
One button with all functions
Product description:
11