0% found this document useful (0 votes)
401 views2 pages

Manual Appa 25

Manual Digital Multimeter appa 25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
401 views2 pages

Manual Appa 25

Manual Digital Multimeter appa 25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

APPA 25

The Best Value Automotive Multimeter


• 11 Function: DC Voltage
AC Voltage
DC Current
Resistance
Frequency Counter
Temperature Test
RPM Measurement
Duty Cycle
Dwell Test
Diode Test
Continuity Buzzer
• Auto power off extends battery life
• Easy to Use single rotary switch
• 4 Feet drop proof
• Full test lead set (probes + clips)
• Optional protective holster with tilt stand

Advanced Instrument Technology Made Easy


APPA 25 Digital Engine Analyzer
SPECIFICATIONS: TEMPERATURE:
(All specifications at 23°C ±5°C, less that 80% R.H.) Range: -20°C ~ 800°C, -4°F ~ 1472°F
Accuracy: -20°C ~ 350°C, -4°F ~ 662°F. ±(2% + 4°C/8°F)
DC VOLTAGE: 351°C ~ 500°C, 663°F ~ 932°F. ±(2% + 2°C/4°F)
Range: 200mV, 2V, 20V, 200V 501°C ~ 800°C, 933°F ~ 1472°F. ±(3% +2°C/4°F)
Accuracy: ±(0.5% + 1d) Resolution: 1°C or 1°F
Input Impedance: 10M ohm
Overload Protection: 600 Vr.m.s. GENERAL:
Resolution: 0.1mV Display: 3-1/2 digit LCD with Max. reading of 1999
Polarity: Auto polarity, (-) sign turn on at minus
AC VOLTAGE: Overrange Indication: “1” or “-1”
Range: 200V, 600V Low Battery Indication: “ “ is displayed when the battery voltage
Accuracy: ±(1.5% + 5d) at 40Hz ~ 500 Hz drops below the operating voltage
Input Impedance: 10MΩII < 100pF Measurement Rate: 2.5 times per second, normal
Overload Protection: 600 Vr.m.s. Operating Temperature: 0°C to +50°C (below 80% R.H.)
Resolution: o.1V Storage Temperature: -20°C to +60°C (below 80% R.H.)
Temperature Coefficient: 0.15 x (Spec. accuracy)/ °C, (<18°C or > 28°C)
HIGH TACH: Power Reuqirements: Single 9V battery (NEDA 1604, IEC 6F22)
Range: 0 ~ 10000 RPM, reading x 10 (4 cyl, 5 cyl, 6 cyl, 8 cyl) Battery Life: 350 hours typical (alkaline)
Accuracy: ± (1.5% + 50 RPM) Size: 84mm(W) x 175mm(L) x 31mm(H)
Overload Protection: 250VDC/AC peak, within 20 sec. Weight: 330 gms
Resolution: 10 RPM Accessories: Test leads, battery (installed) and manual

AH-90/100 Protective Holster


LO TACH:
Easy-to Clean, nail hook holster absorbs
Range: 0 ~ 2000 RPM (4 cyl, 5cyl, 6cyl, 8cyl)
shocks and protects meter. Lead and probe
Accuracy: ±(1.5% + 5 RPM)
storage on back, lean or stand in best
Overload Protection: 250VDC/AC peak, within 20 sec.
viewing position.
Resolution: 1 RPM

DUTY CYCLE:
Range: 0 ~ 100.0%
Accuracy: ±(1.5% + 2d) AC-90/100 Soft Carrying Case
Overload Protection: 250VDC/AC peak, within 20 sec. Two way zipper double wall vinyl-leather
Resolution: 0.1% carrying case for APPA 90/100 series meters.
Inside pockets are designed to carry a
DWELL DEGREES: manual and test lead.
Range: 0 ~ 90.0°C (4 cyl) Convenient 4.5"(110mm) belt loop
0 ~ 50.0°C (6 cyl) accommodates tool belts.
0 ~ 45.0°C (8 cyl)
Accuracy: ±(1.5% + 2d)
Overload Protection: 250VDC/AC peak, within 20 sec. 50BK K-type Bead Probe
Resolution: 0.1° General purpose applications, low cost.
Teflon tape insulation.
RESISTANCE: Not suitable for liquid immersion.
Range: 200 ohm, 2K ohm, 20K ohm, 200K ohm, 2M ohm. Measurement range:
Accuracy: 200 ohm ±(0.8% + 4d) -40°C to 204°C
2K ohm ~ 2M ohm ± (0.8% + 1d) (-40°F to 399°F)
Overload Protection: 600 Vr.m.s.

DIODE & BUZZER: 50IK K-type Immersion Probe


Open Circuit Voltage: 3.2V max. For engine coolant, brake and transmission
Accuracy: ± (1.5% + 5d) for test diode forward voltage fluid, other liquids and gels.
Buzzer Description: Built-in buzzer sounds when resistance is less than 50 ohms Protected from tip to handle by an Inconel sheath.
Overload Protection: 500VDC/AC r.m.s. Suitable for general temperature
measurement applications.
DC CURRENT: Measurement range: -196°C to 800°C
Range: 15A (-320°F to 1472°F)
Accuracy: ± (2.0% + 3d)
Overload Protection: 15A/250V fast blow fuse APPA 32 AC/DC Current probe
Resolution: 0.01A Non-instrusive transducing from 0.1A to
600A with 2% basic accuracy.
FREQUENCY COUNTER: Wide jaw fits over almost any size conductor.
Range: 2KHz, 20KHz Coiled cable with safety banana plug
Accuracy: ± (1.0% + 3d) extend up to 1.5 meters. 50 hours
Input Protection: 600 Vr.m.s. typical battery life, 9V battery installed

Specifications subject to change without notice. Copyright © 2002 APPA Tech., Corp. All rights reserved

Distrubuted by:

APPA TECHNOLOGY CORP.


5F, 233-1 Pao-Chiau Rd., Shin-Tien,
Taipei, 231, TAIWAN, R.O.C.
P.O. Box 12-24 Shin-Tien Taipei TAIWAN
Tel: 886-2-9178820 Fax: 886-2-9170848
E-MAIL: [email protected]
http://www.appatech.com

You might also like