RSL CBTA Plan
KOLEJ VOKASIONAL BATU LANCHANG PULAU PINANG
KEMENTERIAN PELAJARAN MALAYSIA
RANCANGAN SESI LATIHAN SEMESTER _3_
Jabatan Teknologi Elektrik & Elektronik
Nama Kursus Teknologi elektrik
Kod dan Tajuk Modul ETE 3012 THREE PHASE DRAWING
Tarikh/Jangka masa
pelaksanaan
17 MINGGU Jam Pertemuan: 4 HOURS/WEEK (L: 1 P: 3)
Course Outcomes:
At the end of the module, the students should be able to:-
1. Identify three phase drawing specifications.
2. Prepare three phase drawing equipment and materials.
3. Carry out three line / schematic diagram drawing.
4. Carry out three phase wiring drawing.
5. Inspect three phase drawing.
KAEDAH
MINGGU KOMPETENSI KAEDAH PENGAJARAN BAHAN / SUMBER
PENTAKSIRAN
1. IDENTIFY THREE 1.1 Sketch layout plan according to Kertas latihan Kertas
PHASE DRAWING requirement.
penerangan
MG 1- MG 3 SPECIFICATIONS
1.2 Calculate Ohms’s Law, MD & TCL Kertas kerja
(2/1/2018-19/1/2018) AND REQUIREMENT correctly according to Electrical Act & LCD Projektor
Regulation and Standard.
Kertas tugasan
1.3 List out the selection of protection Kertas Kuiz
devices, and cable according to
Buku teks lukisan
requirement and specification.
elektrik
2. CARRY OUT 2.1 Sketch building layout sketched Penilaian Teori Kertas
LAYOUT DRAWING according to specification.
MG 4- MG 7 (Tugasan) penerangan
(22/1/2017-16/2/2017) 2.2 Determine three phase wiring (22/1/2018) Kertas kerja
configuration according to standard LCD Projektor
format.
Pentaksiran Kertas tugasan
2.3 Determine types of accessories and praktikal 1 Kertas Kuiz
fittings according to requirement and (5/2/2018) Buku teks lukisan
specification.
elektrik
2.4 Draw layout drawing according to
requirement and specification.
2.5 Check layout drawing format according
to standard format
CUTI PERTENGAHAN SEMESTER (17/3/2018-25/3/2018)
3.1 Determine three line drawing
MG 8-MG 11 3. CARRY OUT THREE requirements and specification according Pentaksiran Kertas
(19/2/2018-16/3/2018) LINE / SCHEMATIC to standard format.
Teori 1 penerangan
DIAGRAM DRAWING
3.2 Determine devices and cable (26/2/2018) Kertas kerja
specification according to device, cable, Pentaksiran LCD Projektor
wiring and Electrical symbol circuit.
Teori 2 Kertas tugasan
(12/3/2018) Kertas Kuiz
3.3 Determine electrical symbol circuit
Buku teks lukisan
according to device, cable, wiring and
Electrical symbol circuit. elektrik
3.4 Draw three line drawings according to
requirement and specification.
3.5 Check three line drawing format
according to standard format.
4. CARRY OUT THREE 4.1 Determine three phase wiring Pentaksiran Kertas
PHASE WIRING configuration according to standard
format. praktikal 2 penerangan
DRAWING
(26/3/2018) Kertas kerja
4.2 Determine types of accessories and LCD Projektor
fittings according to requirement and
specification. Kertas tugasan
MG12-M15 Kertas Kuiz
(26/3/2018-20/4/2018) 4.3 Draw three phase three phase wiring
Buku teks lukisan
drawing according to requirement and
specification. elektrik
4.4 Check three phase three phase wiring
drawing format according to standard
format.
5. INSPECT THREE 5.1 Check drawing error correctly according Kertas
PHASE DRAWING to standard format.
Kertas latihan penerangan
5.2 Check drawing specification according to Kertas kerja
MG 16-MG 17 format. LCD Projektor
(23/4/2018-4/5/2018) 5.3 Calculate Ohm’s Law, TCL & MD Kertas tugasan
according to requirement and Kertas Kuiz
specification.
Buku teks lukisan
elektrik
MG 18 PENILAIAN AKHIR TEORI
MG 19 PENILAIAN AKHIR AMALI
