Scribd
Upload
1K views4 pages

Cathodic Protection Drawings SP-1136

This document provides a specification for cathodic protection drawings used by Petroleum Development Oman L.L.C. It includes a list of 17 cathodic protection standard drawings covering topics like connection pads, test facilities, junction boxes, groundbeds, and isolating equipment. The specification instructs users to check that they are using the latest version and not to change the specification without approval from the Corporate Functional Discipline Head who owns the document.

Uploaded by

anuprajosh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views4 pages

Cathodic Protection Drawings SP-1136

This document provides a specification for cathodic protection drawings used by Petroleum Development Oman L.L.C. It includes a list of 17 cathodic protection standard drawings covering topics like connection pads, test facilities, junction boxes, groundbeds, and isolating equipment. The specification instructs users to check that they are using the latest version and not to change the specification without approval from the Corporate Functional Discipline Head who owns the document.

Uploaded by

anuprajosh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Specification for Cathodic Protection Drawings Version 1.

Petroleum Development Oman L.L.C.

UNRESTRICTED Document ID : SP-1136


September 1999 Filing key : xxxx

Specification for

Cathodic Protection Standard Drawings

Keywords
Cathodic Protection
Drawings
Pipelines
Buried structures
Impressed current
Groundbeds
Anode
Transformer rectifiers
Junction box/connection box/bond box/distribution box
Test facility
Isolating couplings
Test post/test point
Cable connection
Road crossing

This document is the property of Petroleum Development Oman, LLC. Neither the whole nor any part of this document may be
disclosed to others or reproduced, stored in a retrieval system, or transmitted in any form by any means (electronic, mechanical,
reprographic recording or otherwise) without prior written consent of the owner

SP-1136 1 September 1999


Specification for Cathodic Protection Drawings Version 1.0

AUTHORISED FOR ISSUE

Signed :............................................................
CFDH Materials & Corrosion
J.H.Gerretsen

Version No. Date Author Scope / Remarks


1 Sept/99 OTT/11 Updated

INSTRUCTIONS TO USER

Make sure this is the latest issue of Specification. Refer to the EMDS on the PDO web for the last issue
date of the individual drawings.

Where this Specification refers to DEPs and International Standards, it refers to the issues that were in-use
when the author wrote this Specification. Exceptions are references to specific issues. If you use DEPs or
International Standards with this Specification, make sure you use the latest issues.

Do not change this Specification without approval. Only the Custodian, the Corporate Functional
Discipline Head (CFDH) who owns this Specification, can give approval for changes. If you think the
Specification is not correct, write your comments on a copy of the User Comment Form. The form is the
last page of this Specification. Send the copy with your comments and personal details to OTE/21.

SP-1136 2 September 1999


Specification for Cathodic Protection Drawings Version 1.0

DRAWING LIST

Drawings are available on the EDMS under this specification number

Drawing No. No. of Sheets Title

STD-7-2001 2 CP Welded Cable Connection Pad (Pipelines and Vessels)

STD-7-2002 2 CP Pin Brazed Connection (Pipelines and Vessels)

STD-7-2003 2 CP Welded Cable Connection Pad (Tanks)

STD-7-3001 1 CP Standard Test / Post Pipeline Marker

STD-7-3002 1 CP Negative Distribution Box Type B

STD-7-3003 1 CP Test Point Type 2 Drain Point and Current


Measurement Facility

STD-7-3005 1 CP Test Point Type 5 Foreign Service Test Facility

STD-7-3007 2 CP Test Point Type 3, Isolating Coupling Test Facility

STD-7-3008 2 CP Junction / Connection Box Support Frame

STD-7-3009 2 CP Negative Distribution Box Support Frame

STD-7-3010 1 General Purpose Bond Box

STD-7-3011 1 CP Negative Distribution Box Type A

STD-7-3012 1 CP Test Point Type 1 - Potential Measurement

STD-7-3013 1 CP Negative Junction Box

STD-7-3014 1 CP Anode Junction Box Type ‘A’ (Borehole Groundbed


Anodes)

STD-7-3015 1 CP Anode Junction Box Type ‘B’

STD-7-3016 1 CP Test Point Type 7 - Buried Coupon Facility

STD-7-3017 3 CP Test Point - Type 8 - Cased Crossing Test Facility

STD-7-3018 2 CP Test Point Type 8, Combined Pipeline Isolation


Coupling and Drain Point Test Facility

STD-7-4001 3 CP Tank Farm Test Facilities

STD-7-4002 2 CP Drain Vessel Test Facility

STD-7-4003 2 Tank Internal Anode Monitoring Detail

STD-7-5001 1 CP Insulated Flange Arrangement

STD-7-5002 1 CP Typical Isolating Joint

SP-1136 3 September 1999


Specification for Cathodic Protection Drawings Version 1.0

Drawing No. No. of Sheets Title

STD-7-5003 1 CP Isolating Spool Pieces

STD-7-6001 3 CP Vertical Anode Groundbed Installation Details

STD-7-6003 3 CP Horizontal Anode Groundbed Installation Details

STD-7-6004 4 CP Borehole Groundbed Construction Details

STD-7-6005 1 External Tank Base Cathodic Protection


Typical Polymeric Anode Installation

STD-7-6006 1 External Tank Base Cathodic Protection


Typical MMO Anode Piggy Back Installation

STD-7-6007 2 External Tank Base Cathodic Protection


Typical Angular Drilled Anode Installation.

STD-7-7001 1 CP Cable Route Markers

SP-1136 4 September 1999

You might also like