HCD-AZ2D-AZ5D SM 987971801

HCD-AZ2D/AZ5D
SERVICE MANUAL E Model

Australian Model
Ver. 1.0 2005.06
• HCD-AZ2D is the amplifier, disc player, tape

deck and tuner section in DHC-AZ2D.
• HCD-AZ5D is the amplifier, disc player tape
deck and tuner section in DHC-AZ5D. Photo: HCD-AZ5D
This system incorporates Dolby1) Digital, Dolby Pro Model Name Using Similar Mechanism NEW
Logic (II) adaptive matrix surround decoder, and DVD
DTS2) Digital Surround System. DVD Mechanism Type CDM86-DVBU101
Section
1)
Manufactured under license from Dolby Optical Pick-up Block Name KHM-310CAB
Laboratories.
Tape deck-A Model Name Using Similar Mechanism NEW
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Section Tape Transport Mechanism Type CMAL5Z230
2)
Manufactured under license from Digital Theater Tape deck-B Model Name Using Similar Mechanism NEW
Systems, Inc. “DTS” and “DTS Digital Surround”
are registered trademarks of Digital Theater Section Tape Transport Mechanism Type CMAL1Z254A
Systems, Inc.
SPECIFICATIONS
Amplifier section MIC 1/MIC 2 (phone jacks): CENTER SPEAKER (HCD-AZ5D only):
HCD-AZ5D sensitivity 1 mV, Use only the supplied
impedance 10 kilohms speaker SS-CT7D.
The following measured at AC 120, 127, 220, 240 V, Outputs SUBWOOFER (HCD-AZ5D only):
50/60 Hz VIDEO/SAT OUT (audio) (phono jacks): Use only the supplied
DIN power output (rated): 75 + 75 watts voltage 250 mV, speaker SS-WG7D.
(4 ohms at 1 kHz, DIN) impedance 1 kilohm
Continuous RMS power output (reference) VIDEO OUT (phono jack): Disc player section
Front speaker: 100 + 100 watts max. output level System Compact disc and digital
(4 ohms at 1 kHz, 10% 1 Vp-p, unbalanced, Sync audio and video system
THD) negative, load impedance Laser Semiconductor laser
Center speaker: 50 watts (8 ohms at 1 kHz, 75 ohms (DVD: λ =650 nm,
10% THD) S VIDEO OUT (4-pin/mini-DIN jack): CD: λ =790 nm)
Surround speaker: 50 + 50 watts Y: 1 Vp-p, unbalanced, Emission duration:
(8 ohms at 1 kHz, 10% Sync negative, continuous
THD) C: 0.286 Vp-p, load Frequency response DVD (PCM 48 kHz):
Subwoofer: 180 watts (2 ohms at impedance 75 ohms 2 Hz − 22 kHz (±1 dB)
100 Hz, 10% THD) COMPONENT VIDEO OUT: CD: 2 Hz − 20 kHz (±1 dB)
Y: 1 Vp-p, 75 ohms Video color system format
HCD-AZ2D
PB, PR: 0.7 Vp-p, 75 ohms Latin American model:
The following measured at AC 120, 127, 220, 240 V, DVD DIGITAL OUT (DHC-AZ2D only) NTSC
50/60 Hz (Square optical connector jack, rear panel) Other models: NTSC, PAL
DIN power output (rated): 75 + 75 watts Wavelength 660 nm
(4 ohms at 1 kHz, DIN) PHONES (stereo mini jack):
Continuous RMS power output (reference) accepts headphones of – Continued on next page –
100 + 100 watts 8 ohms or more
(4 ohms at 1 kHz, 10% FRONT SPEAKER: Use only the supplied
THD) speaker SS-AZ7D.
Inputs
SURROUND SPEAKER (HCD-AZ5D only):
DVD DECK RECEIVER

VIDEO/SAT IN (audio) (phono jacks):
Use only the supplied
voltage 250/450 mV,
speaker SS-RS7D.
impedance 47 kilohms
9-879-718-01 Sony Corporation

2005F0579-1 Audio Group
© 2005.06 Published by Sony Engineering Corporation
HCD-AZ2D/AZ5D
Tape deck section SELF DIAGNOSIS FUNCTION

Recording system 4-track 2-channel stereo
Frequency response 50 − 13,000 Hz (±3 dB),
using Sony TYPE I
Self-diagnosis Function
cassette (When letters/numbers appear in the
Tuner section display)
FM stereo, FM/AM superheterodyne tuner
FM tuner section When the self-diagnosis function is activated to
Tuning range 87.5 − 108.0 MHz prevent the system from malfunctioning, a 5-
(50-kHz step) character service number (e.g., C 13 50) with a
Antenna FM lead antenna
combination of a letter and 4 digits appears on
Antenna terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz the screen and the front panel display. In this
case, check the following table.
AM tuner section
Tuning range
Latin American model: 530 − 1,710 kHz
(with the interval set at
10 kHz)
531 − 1,710 kHz
9 kHz) First 3 Cause and/or corrective action
Saudi Arabian and Russian models: characters of
531 − 1,602 kHz the service
(with the interval set at number
9 kHz)
C 13 The disc is dirty.
Other models: 530 − 1,710 kHz
,Clean the disc with a soft cloth .
10 kHz) C 31 The disc is not inserted correctly.
531 − 1,602 kHz ,Restart the system, then reinsert
(with the interval set at the disc correctly.
9 kHz)
E XX To prevent a malfunction, the
Antenna AM loop antenna
Antenna terminals External antenna terminal (xx is a number) system has performed the self-
Intermediate frequency 450 kHz
diagnosis function.
,Contact your nearest Sony
dealer or local authorized Sony
General
service facility and give the 5-
Power requirements
character service number.
Australian model: 230 − 240 V AC, 50/60 Hz
Saudi Arabian model: 120 − 127 V, Example: E 61 10
220 − 240 V AC, 50/60 Hz
Adjustable with voltage
selector Notes on chip component replacement
Indian and Russian models: 220 − 240 V AC, • Never reuse a disconnected chip component.
50/60 Hz • Notice that the minus side of a tantalum capacitor may be
Thai model: 220 V AC, 50/60 Hz
Korean model: 220 V AC, 60 Hz
damaged by heat.
Other models: 120 V, 220 − 240V AC,
50/60 Hz Flexible Circuit Board Repairing
Adjustable with voltage • Keep the temperature of the soldering iron around 270 ˚C
selector during repairing.
Power consumption
HCD-AZ5D 170 watts
• Do not touch the soldering iron on the same conductor of the
HCD-AZ2D 100 watts circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
Dimensions (w/h/d) or unsoldering.
HCD-AZ5D Approx. 190 × 381 ×
317 mm
HCD-AZ2D Approx. 190 × 381 × CAUTION
317 mm
Use of controls or adjustments or performance of procedures
Mass other than those specified herein may result in hazardous radiation
HCD-AZ5D Approx. 6.7 kg exposure.
HCD-AZ2D Approx. 6.2 kg
Design and specifications are subject to change This appliance is

without notice. classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
HCD-AZ2D/AZ5D
• DVD-ROMs/DVD-Rs/DVD-RWs/DVD+Rs/
Playable discs DVD+RWs recorded in Multi Session Cautions when playing a disc
• DVD-RAMs that is recorded in Multi
You can play back the following discs on this • DVD Audio discs Session
system. Other discs cannot be played back. • A DVD with a different region code.
• This system can play Multi Session CDs
• An 8 cm disc with an adapter when an MP3 audio track is contained in the
List of playable discs • Discs with non-standard shapes (e.g., heart, first session. Any subsequent MP3 audio
square, star) cannot be played on this unit. tracks recorded in later sessions can also be
Format of discs Disc logo
Attempting to do so may damage the unit. Do played back.
not use such discs.
DVD VIDEO • This system can play Multi Session CDs
• A disc with paper or stickers on it.
when a JPEG image file is contained in the
• A disc that has the adhesive, cellophane tape,
first session. Any subsequent JPEG image
or a sticker still left on it.
files recorded in later sessions can also be
DVD-RW 1) Except for DHC-AZ5D Latin American model and played back.
DHC-AZ2D
2) • If audio tracks and images in music CD
A logical format of files and folders on a CD-ROMs,
format or video CD format are recorded in the
defined by ISO (International Organization for
VIDEO CD standardization).
first session, only the first session will be
played back.
• CD-R and CD-RW discs recorded in multi-
Audio CD
Notes about CD-R/CD-RW/ session that have not ended by “closing the
DVD-R/DVD-RW/DVD+R/ session” are not supported.
DVD+RW • With CD-ROMs/CD-Rs/CD-RWs that
contain DivX video files in addition to MP3
• In some cases, CD-Rs, CD-RWs, DVD-Rs, audio tracks or JPEG image files, the system
CD-R/CD-RW
DVD-RWs, DVD+R or DVD+RW cannot be plays only the DivX video files.*
played on this system depending upon the
* Except for DHC-AZ5D Latin American model and
recording quality or physical condition of the
DHC-AZ2D
disc, or the characteristics of the recording
device. Furthermore, the disc will not play if
it has not been correctly finalized. For more Copyrights
information, see the operating instructions for
This product incorporates copyright protection
The “DVD VIDEO” logo and “DVD-RW” logo are the recording device.
technology that is protected by U.S. patents and
trademarks. • A disc recorded in packet write format cannot
other intellectual property rights. Use of this
be played.
copyright protection technology must be
Region code of DVDs you can authorized by Macrovision, and is intended for
play on this system Note on playback operations home and other limited viewing uses only unless
Your system has a region code printed on the of DVDs and VIDEO CDs otherwise authorized by Macrovision. Reverse
back of the unit and will only play DVDs labeled engineering or disassembly is prohibited.
Some playback operations of DVDs and VIDEO
with identical region code.
CDs may be intentionally set by software
DVDs labeled ALL will also be played on this producers. Since this system plays DVDs and
system. VIDEO CDs according to the disc contents the
If you try to play any other DVD, the message software producers designed, some playback
“Playback prohibited by area limitations.” will features may not be available. Also, refer to the
appear on the TV screen. Depending on the instructions supplied with the DVDs or VIDEO
DVD, no region code indication may be labeled CDs.
even though playing the DVD is prohibited by
area restrictions.
Music discs encoded with
X Region code copyright protection
MODEL NO. HCD-AZXX
DVD DECK RECEIVER
AC: 00V 00Hz 00W
technologies
SERIAL NO: This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Discs that this system cannot Recently, various music discs encoded with
copyright protection technologies are marketed
play
by some record companies. Please be aware that
• CD-ROMs/CD-Rs/CD-RWs other than those among those discs, there are some that do not
recorded in the following formats: conform to the CD standard and may not be
− music CD format playable by this product.
− video CD format
− MP3 (MPEG1 Audio Layer-3)/JPEG/
Note on DualDiscs
DivX1) format that conforms to ISO96602)
Level 1/Level 2 or Joliet A DualDisc is a two sided disc product which
• CD-ROMs recorded in PHOTO CD format mates DVD recorded material on one side with
• Data part of CD-Extras digital audio material on the other side.
• Super Audio CDs However, since the audio material side does not
DVD-ROMs/DVD-Rs/DVD-RWs/DVD+Rs/ conform to the Compact Disc (CD) standard,
DVD+RWs other than those recorded in playback on this product is not guaranteed.
DivX format conforming to Universal Disk
Format (UDF).1)
3
HCD-AZ2D/AZ5D
TABLE OF CONTENTS
1. SERVICING NOTES ............................................... 5 7-12. Printed Wiring Board – MS-214 Board – ...................... 39
7-13. Schematic Diagram – MS-214 Board – ........................ 39
2. GENERAL ................................................................... 9 7-14. Printed Wiring Board – MAIN Board – ........................ 40
7-15. Schematic Diagram – Main Board (1/4) – .................... 41
3. DISASSEMBLY 7-16. Schematic Diagram – Main Board (2/4) – .................... 42
3-1. Disassembly Flow ........................................................... 11 7-17. Schematic Diagram – Main Board (3/4) – .................... 43
3-2. Side Panel (A)/(B) ........................................................... 12 7-18. Schematic Diagram – Main Board (4/4) – .................... 44
3-3. Front Panel Section ......................................................... 12 7-19. Printed Wiring Board
3-4. Tape Mech Deck (CMAL1Z254A) (Deck-B) ................. 13 – S-MASTER Board (Component Side) – ...................... 45
3-5. Top Panel (TC) Section ................................................... 13 7-20. Printed Wiring Board
3-6. Tape Mech Deck (CMAL5Z230) (Deck-A) .................... 14 – S-MASTER Board (Conductor Side) – ........................ 46
3-7. DC Fan (M901) ............................................................... 14 7-21. Schematic Diagram – S-MASTER Board (1/4) – ......... 47
3-8. DVD Mechanism Deck (CDM86-DVBU101) ................ 15 7-22. Schematic Diagram – S-MASTER Board (2/4) – ......... 48
3-9. Optical Pick-up Block (KHM-310CAB) ......................... 16 7-23. Schematic Diagram – S-MASTER Board (3/4) – ......... 49
3-10. Motor (Pulley) Assy (Loading) (M001) .......................... 16 7-24. Schematic Diagram – S-MASTER Board (4/4) – ......... 50
3-11. Holder (BU) Assy ............................................................ 17 7-25. Printed Wiring Board – MIC Board – .......................... 51
3-12. Lever (BU Lock) ............................................................. 17 7-26. Schematic Diagram – MIC Board – ............................. 52
3-13. Close Lever ...................................................................... 18 7-27. Printed Wiring Boards – Output Section – ................... 53
3-14. Lever (DIR), Gear (IDL-B) ............................................. 18 7-28. Schematic Diagram – Output Section – ......................... 54
3-15. Chassis (Top) ................................................................... 19 7-29. Printed Wiring Boards – Display Section – .................. 55
3-16. Lever (Loading-L/R) ....................................................... 20 7-30. Schematic Diagram – Display Section – ........................ 56
3-17. Lever (Disc Sensor)/(Disc Stop) ..................................... 21 7-31. Printed Wiring Boards – Key Section – ........................ 57
3-18. Gear (IDL-C) ................................................................... 21 7-32. Schematic Diagram – Key Section – .............................. 58
4. TEST MODE .............................................................. 22 8. EXPLODED VIEWS

8-1. Side Panel Section .......................................................... 75
5. MECHANICAL ADJUSTMENTS ....................... 25 8-2. Front Panel Section ........................................................ 76
8-3. Top Panel (TC) Section .................................................. 77
8-4. Main Board Section ........................................................ 78
6. ELECTRICAL ADJUSTMENTS ......................... 25
8-5. DMB10 Board Section .................................................. 79
8-6. Chassis Section ............................................................... 80
7. DIAGRAMS 8-7. DVD Mechanism Deck Section-1
7-1. Block Diagram – RF Servo/Video Section – ................... 27 (CDM86-DVBU101) ....................................................... 81
7-2. Block Diagram – Tuner/Tape Section – .......................... 28 8-8. DVD Mechanism Deck Section-2
7-3. Block Diagram – Audio Section – .................................. 29 (CDM86-DVBU101) ....................................................... 82
7-4. Block Diagram – AMP Section – .................................... 30 8-9. DVD Mechanism Deck Section-3
7-5. Block Diagram – Panel/Power Supply Section – ............ 31 (CDM86-DVBU101) ....................................................... 83
7-6. Printed Wiring Board – DMB10 Board (Side A) – ......... 33 8-10. DVD Mechanism Deck Section-4
7-7. Printed Wiring Board – DMB10 Board (Side B) – ...... 34 (CDM86-DVBU101) ....................................................... 84
7-8. Schematic Diagram – DMB10 Board (1/4) – ................ 35
7-9. Schematic Diagram – DMB10 Board (2/4) – ................ 36 9. ELECTRICAL PARTS LIST ................................ 85
4
HCD-AZ2D/AZ5D
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP MODEL IDENTIFICATION

BLOCK OR BASE UNIT – Back Panel –
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
UNLEADED SOLDER
PART No.
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
Model PART No.
HCD-AZ2D: SP, MY 2-349-677-0[]
: LEAD FREE MARK
HCD-AZ2D: E2 2-349-677-1[]
Unleaded solder has the following characteristics.
HCD-AZ2D: E12, E13 2-349-677-2[]
• Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder. HCD-AZ2D: AUS 2-349-677-3[]
Ordinary soldering irons can be used but the iron tip has to be HCD-AZ2D: EA 2-349-677-4[]
applied to the solder joint for a slightly longer time. HCD-AZ2D: KR 2-349-677-5[]
Soldering irons using a temperature regulator should be set to HCD-AZ2D: PH 2-349-677-6[]
about 350 ˚C. HCD-AZ2D: E3, E15 2-349-677-7[]
Caution: The printed pattern (copper foil) may peel away if HCD-AZ5D: SP, MY 2-548-561-0[]
the heated tip is applied for too long, so be careful! HCD-AZ5D: E2 2-548-561-1[]
• Strong viscosity
HCD-AZ5D: E12, E13 2-548-561-2[]
Unleaded solder is more viscou-s (sticky, less prone to flow)
HCD-AZ5D: AUS 2-548-561-3[]
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc. HCD-AZ5D: EA 2-548-561-4[]
• Usable with ordinary solder HCD-AZ5D: TH 2-548-561-5[]
It is best to use only unleaded solder but unleaded solder may HCD-AZ5D: E3, E15 2-548-561-6[]
also be added to ordinary solder.
• Abbreviation
RELEASING THE DISC SLOT LOCK AUS : Australian model
The disc slot lock function for the antitheft of an demonstration E2 : 120V AC area in E model
disc in the store is equipped. E3 : 240V AC area in E model
E12 : 220-240V AC area in E model
Releasing Procedure: E13 : 220-230V AC area in E model (Russian model)
1. Press `/1 button to turn the power on. E15 : Iranian model
EA : Saudi Arabia model
2. Touch the [DVD] sensor to select the “DVD”.
KR : Korean model
3. Touch the x sensor and press the Z button simultaneously MY : Malaysia model
and hold down until “UNLOCKED” displayed on the PH : Philippines model
fluorescent indicator tube (around 5 seconds). SP : Singapore model
TH : Thai model
Note: When “LOCKED” is displayed, the slot lock is not released by turning
power on/off with the `/1 button.
NOTE OF REPLACEMENT THE DMB10 BOARD

New part of EEPROM (IC103) on the DMB10 board can not be
used. Therefore, if the mounted DMB10 board is replaced, exchange
new EEPROM with that used before the replacement.
5
HCD-AZ2D/AZ5D
TAPE MECH DECK (CMAL5Z230) (DECK-A) SERVICE POSITION
tape mech deck

(CMAL5Z230) (deck-A)
top panel (TC) section
TAPE MECH DECK (CMAL1Z254A) (DECK-B) SERVICE POSITION
tape mech deck

(CMAL1Z254A) (deck-B)
6
HCD-AZ2D/AZ5D
DVD MECHANISM DECK (CDM86-DVBU101) SERVICE POSITION

• In checking the DVD mechanism deck (CDM86-DVBU101), prepare extension jig (Part No. J-2501-241-A: 1.00mm pitch, 7 cores,
length 300mm).
Connect extension jig (J-2501-241-A) to the

MS-214 board (CN001) and DVB10 board (CN202). MS-214 board
(CN001)
DVD mechanism deck
(CDM86-DVBU101)
DMB10 board
(CN202)
DMB10 BOARD SERVICE POSITION

• In checking the DMB10 board, prepare two extension jigs (Part No. J-2501-102-A: 1.00mm pitch, 13 cores, length 300mm and Part No.
J-2501-244-A: 1.00mm pitch, 21 cores, length 300mm).
MAIN board DMB10 board

(CN203) (CN302)
MAIN board
(CN201)
DMB10 board
(CN106)

MAIN board (CN203) and DMB10 board (CN106).

MAIN board (CN201) and DMB10 board (CN302).
7
HCD-AZ2D/AZ5D
S-MASTER BOARD SERVICE POSITION

• In checking the S-MASTER board, prepare extension jig (Part No. J-2501-082-A: 1.25mm pitch, 9 cores, length 300mm).

S-MASTER board S-MASTER board (CN502) and MAIN board (CN102).
(CN502)
MAIN board
(CN102)
8
HCD-AZ2D/AZ5D
SECTION 2 This section is extracted from
GENERAL instruction manual.
LOCATION OF CONTROLS
Main unit
ALPHABETICAL ORDER BUTTON DESCRIPTIONS
A–N M–Z ?/1 (power) 1

Z PUSH OPEN/CLOSE (deck A)
CD SYNC qk MIC 1/2 jack qf
(eject) 5
Deck A 4 MIC LEVEL qd
Z (eject) 6
Deck B 0 PC 2 Z PUSH OPEN/CLOSE (deck B)
DIMMER wf PHONES jack qg (eject) 9
DIRECTION ql PRESET +/− qh nN (play) qh
Disc slot 7 PROGRESSIVE wd X (pause) qh
DISPLAY wg Remote sensor 8 x (stop) qh
Display window 3 SOUND FIELD wa > (go forward) qh
DSGX ws TAPE A/B 2 . (go back) qh
DVD 2 TUNER/BAND 2 z START qj
ECHO LEVEL qs VIDEO/SAT 2
EQ SELECT w; VOLUME +/− control qa
12 3 4 5 6
?/1
wg
wf
wd
ws
wa 7
w;
ql
qk
qj 8
qh 9
0
qa
qg qs
qf qd
9
HCD-AZ2D/AZ5D
Remote control
ALPHABETICAL ORDER BUTTON DESCRIPTIONS
A–Q R–Z ?/1 (power) 1

ALBUM +/− wf REPEAT ws TV ?/1 1
ANGLE 5 SLEEP qk REPLAY/ADVANCE
AUDIO 4 8
SOUND FIELD wa
CLEAR es c STEP/STEP C 8
SUBTITLE wd
SLOW y 9
DISC SKIP1) w; THEATRE SYNC ql
M (fast forward) 9
DISPLAY qj TIMER MENU eg
X (pause) q;
ENTER qs TIME/TEXT ef
SLOW qa
FM MODE ws TOP MENU qd
m (rewind) qa
FUNCTION +/− 2 TUNING + 9
M/m/</, qs
KARAOKE MODE qg TUNING − qa
KARAOKE PON qh DISPLAY wg
TV wk
> (go forward) wh
MENU 6 TV CH + wh
x (stop) wj
Number buttons2) qf TV CH − e;
. (go back) e;
PICTURE NAVI 3 TV/VIDEO qk
H (play)2) wl
PRESET + wh TV VOL +/−2) 7
O RETURN ea
PRESET − e; VOLUME +/−2) 7
-/-- es
KEY CONTROL #/2 ed
1) The DISC SKIP button is not
available for this model.
2)
The H, number 5 and
VOLUME + (TV VOL +)
buttons have tactile dots. Use
the tactile dots as references
when operating the system.
Setting the clock

Use buttons on the remote for the operation. To adjust the clock
1 Press ?/1 to turn on the system. 1 Press TIMER MENU.
2 Press TIMER MENU. 2 Press M or m to select “CLOCK SET?”, then
press ENTER.
3 Press M or m repeatedly to set the hour.
3 Do the same procedures as step 3 to 6
4 Press ENTER. above.
5 Press M or m repeatedly to set the Notes
minute. • The clock settings are canceled when you disconnect
6 Press ENTER. the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode.
The clock starts working.
10
HCD-AZ2D/AZ5D
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SET
3-2. SIDE PANEL (A)/(B)

(Page 12)
3-3. FRONT PANEL SECTION 3-8. DVD MECHANISM DECK

(Page 12) (CDM86-DVBU101)
(Page 15)
3-4. TAPE MECH DECK 3-5. TOP PANEL (TC) SECTION

(CMAL1Z254A) (DECK-B) (Page 13)
(Page 13)
3-6. TAPE MECH DECK 3-7. DC FAN (M901)

(CMAL5Z230) (DECK-A) (Page 14)
(Page 14)
3-9. OPTICAL PICK-UP BLOCK

(KHM-310CAB)
(Page 16)
3-10. MOTOR (PULLEY) ASSY 3-11. HOLDER (BU) ASSY

(LOADING) (M001) (Page 17)
(Page 16)
3-12. LEVER (BU LOCK)

(Page 17)
3-13. CLOSE LEVER

(Page 18)
3-14. LEVER (DIR),

GEAR (IDL-B)
(Page 18)
3-15. CHASSIS (TOP)

(Page 19)
3-16. LEVER (LOADING-L/R) 3-17. LEVER (DISC SENSOR)/ 3-18. GEAR (IDL-C)
(Page 20) (DISC STOP) (Page 21)
(Page 21)
11
HCD-AZ2D/AZ5D
Note: Follow the disassembly procedure in the numerical order given.
3-2. SIDE PANEL (A)/(B)
2 three screws
5 side panel (A) (BVTP 3 × 8)
9 side panel (B)
3 7 three screws
(BVTP 3 × 8)
1 three flat head screws
6 three flat head screws
3-3. FRONT PANEL SECTION

3 two claws
6 wire (flat type) (11 core)

(CN111)

(CN112)
(CN113)
1 screw
(BVTP 3 × 8)
q; front panel section

(CN304)
4
1 two screws
(BVTP 3 × 8)
2 three ground wires
9 connector
(CN1050)
9 connector
(CN302)
1 two screws
(BVTP 3 × 8)
12
HCD-AZ2D/AZ5D
3-4. TAPE MECH DECK (CMAL1Z254A) (DECK-B)

3 two screws
(BVTP 2.6)
2 cover (TCM B)
1 two screws
(BVTP 2.6)
5
3 two screws
(BVTP 2.6)
4 ground wire
7 tape mech deck (CMAL1Z254A) (deck-B)
3-5. TOP PANEL (TC) SECTION
3 ground wire
2 screw
(BVTP 3 × 8)
4 top panel (TC) section
2 two screws
(BVTP 3 × 8)
2 screw
(BVTP 3 × 8)
1 connector
(CN301)
13
HCD-AZ2D/AZ5D
3-6. TAPE MECH DECK (CMAL5Z230) (DECK-A)
6 tape mech deck (CMAL5Z230) (deck-A)
4 two screws
(BVTP 2.6) 5 ground wire
4 two screws
(BVTP 2.6)
2 cover (TCM A)
1 three screws
(BVTP 2.6)
3-7. DC FAN (M901)

5 screw
4 screw (BVTP 3 × 8) (AZ2D)
(BVTT 3 × 6)
2 two screws
(BVTP 3 × 8)
3 tuner unit (TM-10KR) (AZ2D: Korean model) 5 seven screws
tuner unit (TM-10E) (except AZ2D: Korean model) (BVTP 3 × 8)
7 connector
(CN954)
8 two screws
(BVTP 3 × 8)
5 two screws
6 (BVTP 3 × 8) (AZ5D)
5 screw
(BVTP 3 × 8)
q; back panel
5 screw
(BVTP 3 × 8)
9 DC fan (M901)
14
HCD-AZ2D/AZ5D
3-8. DVD MECHANISM DECK (CDM86-DVBU101)
CAUTION
9 Be sure to execute a solder bridge as a measure against
static electricity when removing the OP block (DVBU101).
(Otherwise, the OP block will be destroyed.)
8 Lift up the FFC holder.
7 two claws
2 two claws
q; wire (flat type) (24 core)

(CN001)
3
5 three screws
(BVTP 3 × 8)
qs DVD mechanism deck

(CDM86-DVBU101)
1 three screws 1 screw qa connector
(BVTP 3 × 8) (BVTP 3 × 8)
NOTE WHEN REMOVING DVD MECHANISM DECK (CDM86-DVBU101)

Some Screws on the CDM86-DVBU101 are hidden by the Front Panel,
and accordingly remove four Screws (BVTP3x8) on the Front Panel and
shift the Front Panel toward the front, and then remove the Screws on the CDM86-DVBU101.
15
HCD-AZ2D/AZ5D
3-9. OPTICAL PICK-UP BLOCK (KHM-310CAB)
3 optical pick-up block

(KHM-310CAB)
2 two insulators
2 two insulators
1 two insulator screws

1 two insulator screws
3-10. MOTOR (PULLEY) ASSY (LOADING) (M001)
2 two screws
(B 2.6 × 8)
5 MS-214 board
3 Remove two solders.
4 motor (pully) assy (loading)

(M001)
1 belt (MOT)
16
HCD-AZ2D/AZ5D
3-11. HOLDER (BU) ASSY
1 screw
(B 2.6 × 8)
2 lever (CL UP2)
6 holder (BU) assy
4 LHL support
5 floating screw
(PTPWH M2.6)
3 two screws
(B 2 × 6)
5 floating screw
(PTPWH M2.6)
3-12. LEVER (BU LOCK)
4 lever (BU lock) 3 three hooks
1 gear (cap)
2 gear (BU lock)
17
HCD-AZ2D/AZ5D
3-13. CLOSE LEVER
1 washer (3-1-0.4)
5 close lever
3 claw
2 SPR-E lever close
4 shaft disc stop
3-14. LEVER (DIR), GEAR (IDL-B)

3 nylon washer 1.7
2 claw
4 pulley (gear)
washer 5 gear (cap)
6 gear (IDL-A)
9 stoper
0 Lever (DIR)
qa gear (IDL-B)
1 tension coil spring (DIR)
7 Loosen the screw.
8 Hold the release lever

and change the direction.
18
HCD-AZ2D/AZ5D
3-15. CHASSIS (TOP)
4 three screws 1 screw

(B 2.6 × 8) (B 2.6 × 8)
3 two screws
(B 2 × 10) 2 lever (CL UP2)
5 chassis (top)
19
HCD-AZ2D/AZ5D
3-16. LEVER (LOADING-L/R)
1 1
SPT-T (loading-R) SPR-T (loading-L)
5 lever (loading-R)
2 two hooks
4 two hooks
3 lever (loading-L)
PRECAUTION DURING LEVER (LOADING R / L) INSTALLATION
BOTTOM VIEW
Align the horizontal position.

lever (loading-L) lever (loading-R)
Install the both levers so that they move symmetrically.
20
HCD-AZ2D/AZ5D
3-17. LEVER (DISC SENSOR)/(DISC STOP)
1 gear (cap)
2 gear (IDL L)
PRECAUTION DURING DISC STOP LEVER INSTALLATION
chassis (top)
hole
5 two hooks
3 two claws
lever (disc stop)

6 lever (disc stop)
hole
4 lever (disc sensor) Install the lever (disc stop) so that the both holes
are aligned.
3-18. GEAR (IDL-C)
3 gear (IDL-D)
4 three hooks
2 two claws
1 gear (IDL-F)
5 lever (gear loading) assy
7 gear (IDL-C)
6 claw
21
HCD-AZ2D/AZ5D
SECTION 4
TEST MODE
COLD RESET DISC SLOT LOCK
The cold reset clears data except DVD data stored in the RAM to This mode let you lock the disc slot. When this mode is activated,
initial conditions. Execute this mode when returning the set to the the disc will not eject when Z button is pressed. The message
customers. “LOCKED” will be displayed in on the fluorescent indicator tube.
Procedure: Procedure:
1. Press the ?/1 button to turn the power on. 1. Press the ?/1 button to turn the power on.
2. Press two buttons of ?/1 , [DISPLAY]and touch the x sensor 2. Touch the [DVD] sensor to select the “DVD”.
simultaneously. 3. Touch the x sensor and press the Z button simultaneously
3. The message “COLD RESET” is displayed on the fluorescent and hold down until “LOCKED” or “UNLOCKED” displayed
indicator tube, then become standby mode. on the fluorescent indicator tube (around 5 seconds).
PANEL TEST MODE TUNER STEP CHANGE

This mode is used to check the fluorescent indicator tube, LED, (Except Saudi Arabian and Russian models)
model, destination, software version and key. The step interval of AM channels can be toggled between 9 kHz
Procedure: and 10 kHz.
1. Press two buttons of [DIMMER] , [DIRECTION] and touch the Procedure:
x sensor simultaneously. 1. Press the ?/1 button to turn the power on.
2. All LEDs and segments in fluorescent indicator tube are lighted 2. Touch the [TUNER/BAND] sensor to select the “AM”.
up. 3. Press the ?/1 button to turn the power off.
3. When you want to enter the software version display mode,
4. Touch the .– sensor and press ?/1 button simultaneously.
touch the .– sensor. The model name is displayed. The set power on automatically. The message “AM 9k Step”
4. Each time .– sensor is touched, the display changes from or AM10k Step” displayed on the fluorescent indicator tube
destination, MC version, SYS version, UI version, DVD and thus the channel step is changed.
version, ST version, TA version, TM version, TC version in
this order, and returns to the model name display. FUNCTION NAME CHANGE
5. When > + sensor is touched while the version numbers are This mode let you change from VIDEO to SAT and vice-versa.
being displayed except model name and destination, the date Procedure:
of the software creation appear. When > + sensor is touched 1. Press the ?/1 button to turn the power on.
again, the display returns to the software version display. When 2. Touch the [VIDEO/SAT] sensor and press ?/1 button
.– sensor is touched while the date of the software creation simultaneously. The set power on automatically and the
is being displayed, the date of the software creation is displayed function will changed to SAT. Do the same procedures again
in the same order of software version display. to change from SAT to VIDEO.
6. Press the [DSGX] button, the key check mode is activated.
7. In the key check mode, the fluorescent indicator tube displays COLOR SYSTEM CHANGE
“K 0”. Each time a button is pressed, “K 0” value increases. (Except Latin American and Russian models)
However, once a button has been pressed, it is no longer taken This mode let you change the color system of the video output from
into account. PAL to NTSC or vice-versa.
8. To release from this mode, press three buttons in the same Procedure:
manner as step 1 or disconnect the power cord. 1. Press the ?/1 button to turn the power on.
MEMORY CLEAR MODE 3. Press the ?/1 button to turn the power off.
This mode moves clears main microprocessor data stored in the 4. Touch the X sensor and press ?/1 button simultaneously.
RAM to initial conditions. Use this mode when returning the set to 5. The message “COLOR PAL” or “COLOR NTSC” will be
the customer after repair. displayed on the fluorescent indicator tube.
Procedure:
1. Press the ?/1 button to turn the power on.
3. Press the [EQ SELECT] button and touch two sensors of [DVD],
x simultaneously.
4. After the “STANDBY” blinking display finish, the message
“MECH A LOCK” is displayed on the fluorescent indicator
tube.
22
HCD-AZ2D/AZ5D
DVD SECTION 4. MIRROR TIME ADJUSTMENT

On the Drive Manual Operation menu screen, press [5] button on
1. DVD SERVICE MODE GENERAL DESCRIPTION the remote commander, and the following MIRR time Adjust Menu
The Mirror Time and TOP measurement allows you to make will be displayed.
diagnosis and adjustment simply by using the remote commander
and monitor TV. The instructions, diagnosis results, etc. are given MIRR time Adjust Menu
on the on-screen display (OSD).
1. CD MIRR time Check:
2. STARTING DVD SERVICE MODE 2. DVD MIRR time Check:
1. Press the ?/1 button to turn the power on. 3. Threshold:
2. Touch the [DVD] sensor to select the “DVD”. 4. Save to EEPROM
5. Default set MIRR time
3. Press the Z button and touch two sensors of x , [VOLUME
+] simultaneously.
4. The message “SERVICE IN” will be displayed on the
fluorescent indicator tube and the Rimocon Diagnosis Menu
is displayed on the on-screen display on the monitor TV as
[Open] Tray open [Close] tray close
follows. The model name, IF-con version and Syscon version
[0] Return to previous menu
is displayed at the bottom of the on-screen display.
There are five main commands in the Mirr time Adjust menu. The
Remocon Diagnosis Menu
functions of each command are described in the following page.
0. External Chip Check
1. CD MIRR time Check
1. Servo Parameter Check
This command checks the Mirror time value for CD disc.
2. Drive Manual Operation
3. Emergency History
2. DVD MIRR time Check
4. Version Information
This command checks the Mirror time value for DVD disc.
5. Video Level Adjustment
3. Threshold
This command displays the threshold value between CD and DVD
Model Name :AZXD_XX
mirror time.
IF-con :Ver.xx.xx (xxxx)
Syscon :Ver.x.xxx
4. Save to EEPROM
This command saves an adjusted mirror time value to the EEPROM.
5. To execute each function, press its number by using numeric
button on the remote commander (RM-AMU001)
6. To release from this mode, press the ?/1 button to turn the This command will set CD and DVD mirror time to firm ware default
power off. value.
3. DRIVE MANUAL OPERATION [Open]/[Close]
The Drive Manual Operation menu consists of five main functions.
Pressing the Z button controls the tray for disc change during mirror
On the Remocon Diagnosis Menu screen, press [2] button on the
time adjustment.
remote commander, and the following Drive Manual Operation
[0] Return to previous menu.
menu will be displayed.
Press the [0] button on the remote commander to return to previous
menu.
Drive Manual Operation
EXECUTING MIRROR TIME ADJUSTMENT
1. Servo Control
In order to execute mirror time adjustment, the following standard
2. Track/Layer Jump
procedures must be followed.
3. Manual Adjustment
4. Tray Aging Mode
1. Set to the MIRR time Adjust Menu mode.
5. MIRR time Adjust
2. Press the [5] button on the remote commander to select the “5
0. Return to Top Menu
Default set MIRR time”.
3. Press the [3] button on the remote commander to select the “3
Threshold”.
4. Check the value of Threshold on the screen. If it is 75, go to
next step. If it is not so, return to step 2.
23
HCD-AZ2D/AZ5D
17. Take out the CD test disc (YEDS-18)

MIRR time Adjust Menu 18. Release the MIRR time Adjust Menu mode.
1. CD MIRR time Check: 5. EXECUTING IOP MEASUREMENT

2. DVD MIRR time Check: In order to execute IOP measurement, the following standard
3. Threshold: 75 procedures must be followed.
4. Save to EEPROM
5. Default set MIRR time 1. Set to the Drive Manual Operation mode.
2. Press the [3] button on the remote commander, and the
following Manual Adjust menu will be displayed.
Manual Adjust
[Open] Tray open [Close] Tray close 1. Track Balance Adjust:
[0] Return to previous menu 2. Track Gain Adjust:
3. Focus Balance Adjust:
5. Insert the DVD test disc (HLX-504) (Part No.J-6090-088-A) 4. Focus Gain Adjust:
6. Press the [2] button on the remote commander to select the “2 5. Eq Boost Adjust:
DVD MIRR time Check”. 6. Iop:
7. Wait for hexadecimal value to display on the screen. 7. TRV. Level:
8. Check the value (##) of DVD MIRR time on the screen. If ## 8. S curve (FE) Level:
is 28 to 70, go to next step. If it is not so, return to step 5. 9. RFL(PI) Level:
0. MIRR Time:
MIRR time Adjust Menu ↑ ↓ Change Value
1. CD MIRR time Check: [RETURN] Return to previous menu
2. DVD MIRR time Check: $$ ##
3. Threshold: 3. Press the [6] button on the remote commander to select the
4. Save to EEPROM “6. IOP”.
5. Default set MIRR time 4. Wait for hexadecimal Value to display on the screen.
Manual Adjust
1. Track Balance Adjust:

2. Track Gain Adjust:
[Open] Tray open [Close] Tray close 3. Focus Balance Adjust:
[0] Return to previous menu 4. Focus Gain Adjust:
5. Eq Boost Adjust:
9. Press the [4] button on the remote commander to select the “4. 6. Iop: ED
Save to EEPROM” 7. TRV. Level:
10. Check that $$ is the same as the value of ## on the screen. If 8. S curve(FE) Level:
it is not so, return to step 5. 9. RFL(PI) Level:
11. Take out the DVD test disc (HLX-504) and insert the CD test 0. MIRR Time:
disc (YEDS-18) (Part No.3-703-998-01).
↑ ↓ Change Value
12. Press the [1] button on the remote commander to select the
[RETURN] Return to previous menu
“1.CD MIRR time Check”.
13. Wait for hexadecimal value to display on the screen.
5. Convert value (ED) from hexadecimal to decimal using
14. Check the value (@@) of CD MIRR time on the screen. If @@
conversion table.
is 5A to E8, go to next step. If it is not so, return to step 11.
6. If the remainder is smaller than 93 (decimal), then it is OK.
However if the value is higher than 93, then the BU (base
MIRR time Adjust Menu
unit) is defective and need to be change.
1. CD MIRR time Check: && @@
7. Release the Manual Adjust menu mode.
2. DVD MIRR time Check: $$ ##
3. Threshold:
6. DVD RAM CLEAR
4. Save to EEPROM
This mode clears DVD data stored in the DVD RAM to initial
conditions.
1. On the Rimocon Diagnosis Menu screen, press [4] button on

the remote commander to select the “4.Version Information”.
2. Press in order of [MENU] button and [CLEAR] button on the
remote commander.
[Open] Tray open [Close] Tray close
3. Press in order of [MENU] button and [CLEAR] button on the
[0] Return to previous menu
remote commander to clear DVD data.
4. The message “Initialize all data” will be displayed on the
15. Press the [4] button on the remote commander to select the “4.
screen.
Save to EEPROM”.
5. The message will change into “Initialize all data Complete”
16. Check that && is the same as the value of @@ on the screen. If
in about six seconds, and the clearness of the DVD data is
it is not so, return to step 11.
completed.
24
HCD-AZ2D/AZ5D
SECTION 5 SECTION 6
MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS
PRECAUTION DECK SECTION 0 dB=0.775 V
1. Clean the following parts with a denatured-alcohol-moistened
swab :
1. Demagnetize the record/playback head with a head
record/playback head pinch roller
demagnetizer.
erase head rubber belts
2. Do not use a magnetized screwdriver for the adjustments.
capstan idlers
3. After the adjustments, apply suitable locking compound to the
2. Demagnetize the record/playback head with a head
parts adjust.
demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
TEST Tape
4. After the adjustments, appiy suitable locking compound to
the parts adjusted. Tape Signal Used for
5. The adjustments should be performed with the rated power P-4-A063 6.3 kHz, -10 dB Azimuth Adjustment
supply voltage unless otherwise noted.
• Torque Measurement RECORD/PLAYBACK HEAD AZIMUTH ADJUSTMENT

Mode Torque Meter Meter Reading DECK–A DECK–B
3.06 N⋅m to 6.96 N⋅m
FWD CQ-102C 31 to 71 g⋅cm
Note: Perform this adjustments for both decks.
(0.43 – 0.98 oz⋅inch)
Procedure:
0.19 N⋅m to 0.58 N⋅m
FWD 1. Mode: Playback
CQ-102C 2 to 6 g⋅cm
Back Tension test tape
(0.02 – 0.08 oz⋅inch) MAIN board
P-4-A063 VIDEO/SAT OUT
3.06 N⋅m to 6.96 N⋅m (6.3 kHz, –10 dB) jack (J101) level meter
REV CQ-102RC 31 to 71 g⋅cm
(0.43 – 0.98 oz⋅inch)
0.19 N⋅m to 0.58 N⋅m set +
REV –
CQ-102RC 2 to 6 g⋅cm
Back Tension
(0.02 – 0.08 oz⋅inch)
6.96 N⋅m to14.02 N⋅m
2. Turn the adjustment screw and check output peaks. If the peaks
FF/REW CQ-201B 71 to 143 g⋅cm do not match for L-CH and R-CH, turn the adjustment screw
(0.98 – 1.99 oz⋅inch) so that outputs match within 1dB of peak.
9.80 N⋅m
FWD Tension CQ-403A 100 g or more
(3.53 oz or more)
9.80 N⋅m
REV Tension CQ-403R 100 g or more within
(3.53 oz or more) L-CH 1dB
peak
within
Output 1dB
level
R-CH
peak
Screw Screw
position L-CH R-CH position
peak peak
25
HCD-AZ2D/AZ5D
3. Mode: Playback DVD SECTION

test tape MAIN board
P-4-A063 VIDEO/SAT OUT oscilloscope RFMON LEVEL CHECK
(6.3 kHz, –10 dB) jack (J101)
oscilloscope
(DC range)
V H
set DMB10 board
CN105 pin 6 (RFMON) +

CN105 pin 3 (GND) –
waveform of oscilloscope
Procedure :
1. Connect the oscilloscope to CN105 pin 6 (RFMON) and
in phase 45° 90° 135° 180° CN105 pin 3 (GND) on the DMB10 board.
2. Press the `/1 button to turn the power on.
good wrong
3. Insert the test disc (DVD: TDV-520CSO (Part No. J-2501-
236-A), CD: LUV-P01 (Part No. 4-999-032-01) and touch the
Y sensor to playback.
4. After the adjustments, apply suitable locking compound to
4. Confirm that oscilloscope waveform is as shown in the
the pats adjusted.
figure below. (eye pattern)
A good eye pattern means that the diamond shape (◊) in the
Adjustment Location: Playback Head (DECK-A)
center of the waveform can be clearly distinguished.
Record/Playback/Erase Head (DECK-B)
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
forward level:
0.8 ± 0.2 Vp-p (DVD)
0.8 ± 0.2 Vp-p (CD)
Checking Location:
– DMB10 BOARD (Side A) –
reverse CN105
1
IC201 6
forward
IC102
26
HCD-AZ2D/AZ5D
SECTION 7
DIAGRAMS
7-1. BLOCK DIAGRAM – RF SERVO/VIDEO SECTION –
ASDATA0 217 14 SDTI1 LOUT1+ 2 FL FL, FR, SL, SR, FC, SW, LT, RT
LOUT1– 1 MIX AMP
A
RF 6 DVDRF IP
ROUT1+ 48 IC3711 FR (Page 29)
VOA/A 8 MA ROUT1– 47 • SIGNAL PATH
VOB/B 9 MB D/A CONVERTER
VOC/C 10 MC IC301 : CD PLAY
VOD/D 11 MD : DVD PLAY
ASDATA1 218 15 SDTI2 LOUT2+ 46 SL
LOUT2– 45 MIX AMP
2 DVDA : DIGITAL OUT
ROUT2+ 44 IC3731 SR
3 DVDB
4 DVDC
ROUT2– 43 : AUDIO
5 DVDD : VIDEO
VOE/E+G 18 TNI ASDATA2 219 16 SDTI3 LOUT3+ 42 FC :Y
VOF/F+H 19 TPI LOUT3– 41 MIX AMP
ROUT3+ 40 IC3751 SW
: CHROMA
VC 29 V20 ROUT3– 39 : COMPONENT VIDEO
(AZ5D)
PD 20 MDI1
21 MDI2
ASDATA4 222 13 SDTI4 LOUT4+ 38 LT
LOUT4– 37 MIX AMP
AUTOMATIC POWER ACLK 215 10 MCLK
ROUT4+ 33 IC3771 RT
LD (780) CONTROL (FOR CD) 23 LDO1 ABCK 214 9 BICK
Q102-1 ROUT4– 32
ALRCK 213 17 LRCK
XRST 220 8 PDN SW+5V

AUTOMATIC POWER
LD (650) CONTROL (FOR DVD) 22 LDO2 SDA 103 20 SDA CENTER VOLTAGE
Q102-2 GENERATOR
SCL 102 19 SCL Q3801
OPTICAL PICK-UP
ALRCK
ABCK
ACLK
BLOCK
(KHM-310CAB) SPDATA, ACLK, ABCK, ALRCK
CD ON Q103 5 6 B
RF AMP, SERVO DSP,
SPDATA
VR (780) SWITCH EEPROM
SDA
SCL
Q101-1 MPEG DECODER
IC103
(AZ5D) (Page 29)
IC102
DVD ON SPDATA 209

VR (650) SWITCH 187 MSW VIDEO AMP, 75Ω DRIVER
Q101-2 (AZ5D) IC1201
MSW J1202
DIGITAL OPTICAL DVD 4 CVBS IN CVBS OUT 23
VIDEO OUT
SPDIF 225 TRANSCEIVER DIGITAL
LIMIT 176 LIMSW IC231 OUT
(AZ2D)
C Y
YUV2 196 2 C IN C OUT 26 J1201
FOCUS/TRACKING COIL DRIVE, S-DC OUT 27 S VIDEO OUT
SPINDLE/SLED/LOADING MOTOR DRIVE YUV1 194 6 Y IN Y OUT 21
IC201
YUV3 198
FCS+ 36 FOCUS
1 42 FOO
FCS– 37 COIL DRIVE YUV4 202 10 CY IN CY OUT 20 Y
J1203
TRK+ 35 TRACKING YUV5 202 12 CB IN CB OUT 18 PB/CB COMPONENT
4 41 TRO VIDEO OUT
TRK– 34 COIL DRIVE
YUV6 203 14 CR IN CR OUT 16 PR/CR
MUTE1
MUTE2
SL+ 29 SLED
10 38 FMO
SL– 30 MOTOR DRIVE
I/P
S1
SD-RAM FLASH ROM
25 9 3 13
SP+ 27 SPINDLE IC104 IC101
13 37 DMO
SP– 28 MOTOR DRIVE
UDQM
LDQM
/RAS
/CAS
BA0
BA1
CLK
CKE
/WE
DQ0 – DQ15 A0 – A11 DQ0 – DQ7 A-1, A0 – A20
/CS
WE
46
OE
CE
BUFFER 45 47 SPFG
47 2, 4, 5, 7, 8, 10, 11, 13, 42, 23 – 26, 29, 31, 33, 35, 45, 25 – 18, 8 – 1,
20 21 38 37 15 39 18 17 19 16 26 28 11
44, 45, 47, 48, 50, 51, 53 29 – 34, 22, 35 38, 40, 42, 44 48, 17, 16, 9, 10
M001 25 LOADING 16 186 FWD
(LOADING)
M 24 MOTOR DRIVE 17 185 REV
15 39 TROPENPWM
125 – 123, 121, 120, 118, 117, 147, 149 – 151, 166 – 164, 81 – 84, 93, 78, 53 – 59, 75, 74,
143 145 156 157 113 137 140 139 142 138 171 188 77 79 66
MUTE12 19 184 MUTE123 115, 135, 133 – 128, 126 162, 160, 159, 146, 158 86 – 88, 91 72 – 67, 92, 60, 61, 76, 89
BA0
BA1
RCLK
CKE
DQM0
DQM1
RAS
CAS
RCS
RWE
WIDE
DSEL
IOCS
IOOE
IOWR
MUTE5 21 RD0 – RD15 RA0 – RA11 AD0 – AD7 IOA0 – IOA21
MUTE34 20 183 MUTE
TSD-M 22 181 TSDM
TRG-SW
KRMOD
OCKSW
XTALO
CKSW
IFSDO
MREQ
XTALI
IXFCS
IFBSY
PRST
IFSDI
SWITCH MIC
IFCK
42 BUFFER 40 40 IOPMON MIC 205

Q464 C
229 228 104 179 177 101 98 99 100 105 114 207 110 (Page 29)
RF+3.3V
X101
REGO2 31 SWITCH
REGULATOR 8 27MHz
REGO1 32 Q2001
31 32 33 26 28 25 27 34 23
P_O_DVD_SO
P_I_DVD_SI
PI_DVD_SCK
P_I_DVD_XIFCS
P_O_DVD_BUSY
P_I_MREQ
P_I_KRMOD
P_ID_IO_SYSRST
P_VIDEO_MUTE
P_DVD_I_MTK
19 _SLOT_IN
S003 S002 S001 SYSTEM

(TRIGGER) (CHUCKING) (DISC IN/OUT) CONTROLLER
IC401 (1/5)
HCD-AZ2D/AZ5D
27 27
HCD-AZ2D/AZ5D
7-2. BLOCK DIAGRAM – TUNER/TAPE SECTION –
ANTENNA
TUNER UNIT
FM 75Ω ST-L
COAXIAL
FM ANT ST-L D
ST-R R-CH
(Page 29)
AM AM ANT STDOUT 40 ST-DIN
STDIN 38 ST-DOUT
STCLK 39 ST-CLK
STCE 41 ST-CE
TUNED 37 ST TUNED
DECK A/B SELECT SWITCH,

REC/PB EQ AMP
IC101 (1/2)
L-CH 71 PB-L
HP301 70
68 67 66 E
R-CH
(PB) (Page 29)
(DECK-A) MUTING CONTROL
MUTING
SWITCH 70 TC LINE MUTE
R-CH R-CH Q103
Q362
AMS DETECT
11 75 TC AMS IN
Q341 – 343
L-CH 10
R-CH AMS
9
MUTING CONTROL AMS MUTING
MUTING 8 44 P_TC_AMS_MUTE
SWITCH Q140, 363
Q303
Q314, 315 C306, L301
R-CH R-CH
BIAS REC-L
TRAP
48 EQ 50 F
R-CH
(Page 29)
MUTING CONTROL
HRPE301 MUTING
SWITCH 68 TC PB/REC
(REC/PB/ERASE) Q301, 302
Q311 – 313
(DECK-B) MUTING
R-CH
Q104
MUTING CONTROL
SWITCH 69 TC REC MUTE
Q361
T301
BIAS OSC
REC BIAS SYSTEM CONTROLLER
SWITCH A+9V IC401 (2/5)
ERASE Q316, 317
BIAS OSC
67 TC BIAS
Q318
TAPE MECHANISM
DECK BLOCK
• R-ch is omitted due to same as L-ch. A PLAY 22 TC A PLAY SW
• SIGNAL PATH B PLAY 80 TC B PLAY SW
: TUNER (FM/AM) A SHUT 97 TAPE A SHUT
B SHUT 90 TAPE B SHUT
: TAPE PLAY (DECK-A) A HALF 21 TC A HALF
B HALF 91 TAPE B HALF/REC
: TAPE PLAY (DECK-B)
F-REC
: REC R-REC
A TRGM+ TRIGGER PLUNGER

DRIVE (DECK-A) 36 TC A TRG
Q323, 324
(DECK-A)
B TRGM+ TRIGGER PLUNGER

DRIVE (DECK-B) 79 TC B TRG
Q321, 322
(DECK-B)
A CAPM+ CAPSTAN/REEL
M MOTOR DRIVE (DECK-A) 35 TC A CAPM
Q326, 327
CAPSTAN/REEL
(DECK-A)
B CAPM+ CAPSTAN/REEL
M MOTOR DRIVE (DECK-B) 78 TC B CAPM
Q328, 329
CAPSTAN/REEL
(DECK-B)
HCD-AZ2D/AZ5D
28 28
HCD-AZ2D/AZ5D
7-3. BLOCK DIAGRAM – AUDIO SECTION –

J101 (2/2)
L
VIDEO/SAT
USB D/A OUT
CONVERTER R-CH R
IC1 (Page 28)
REC-L
3 F
D+ 9 D+
VOUTL 14
2 SPDATA, ACLK,
D– 8 D– VOUTR 15 R-CH
SPDATA ABCK, ALRCK
1 MUTING 1 LIN DOUT 12 B
VBUS ACLK
SSPND
Q1 SCKI 15
USB CONTROL (Page 27)
HOST
ABCK
XTO
CN1 2 RIN 11
XTI
SWITCH R-CH BCK
PC Q11, 12 ALRCK
21 27 28 1
LRCK 10
FEED BACK G
MUTING CONTROL R-CH
(Page 30)
SWITCH A/D CONVERTER MUTING MUTING
Q113 FEED BACK • R-ch is omitted due to same as L-ch.
(AZ5D) IC3601 Q141 Q201
X11 SWITCH • SIGNAL PATH
J101 (1/2) D1 12MHz Q101
6 52 51
: AUDIO
L INPUT SELECT SWITCH,TONE CONTROL,
VIDEO/SAT 38 MUTING CONTROL MUTING CONTROL
IN
ELECTRICAL VOLUME, BASS BOOST AMP
39
: TUNER (FM/AM) SWITCH SWITCH
R R-CH IC101 (2/2)
40 Q171 Q262
(Page 28) : TAPE PLAY
SELECTOR
62
ST-L BASS
D 63 + 42 41
BOOST
37 : REC
65
(Page 28) 64 (AZ5D)
: DIGITAL OUT
PB-L R-CH + TONE
E R-CH + 31 30 29 : VIDEO/SAT OUT
R-CH
AUDIO : VIDEO/SAT IN
74 I/F
J1060 RV1061 +4.5V
R-CH MCU : USB
MIC 1 ECHO LEVEL
DIGITAL ECHO 33 59 56 53 35 34 : MIC INPUT

IC1061
A+9V
HEADPHONE
J1061 MIC AMP MIC AMP AMP
MIC 2 IC1060 (1/2) IC1060 (2/2) IC3
RV1060
MIC LEVEL RIPPLE
MUTING MUTING
FILTER A+9V
Q73, 83 Q71, 81 J1050
Q82
PHONES
FL, FR, SL, SR,

FC, SW, LT, RT LT MUTING CONTROL
A SWITCH
(Page 27) RT Q22
R-CH
FL, FR, SL,
FL FL SR, C, SW
H
FR FR (Page 30)
R-CH R-CH
MUTING MUTING MUTING MUTING AUDIO SELECT SWITCH MUTING

Q270 Q271 Q272 Q273 IC261 Q31, 32
X0
12 X SL
SL X1 14
13
X-X1
11
Y0
R-CH 2 Y SR
SR Y1 15
1
Y-Y1
10
Z0
5 Z SW
SW Z1 4
3
Z-Z1
9
C C
MUTING MUTING MUTING MUTING MUTING MUTING MUTING MUTING

Q260 Q261 D181
Q274 Q275 Q276 Q277 Q33 Q34 Q35 Q36
Q465
45 42 76 69 71 72
PCM2704 POWER
P_LINK_LFE_SW
P_LINK_SW
P_VACS
P_AMPIC_DATA
P_AMPIC_CLK
MUTING CONTROL
MIC SWITCH
C 65 P_MIC_IN Q30
(Page 27)
MUTING CONTROL (AZ5D) P_LINE_MUTING 66
SWITCH
Q263 P_RECOUT_MUTING 46
DVD POWER
SYSTEM CONTROLLER
P_O_DVD_POWER 48 J
IC401 (3/5) HP_MUTING 61 (Page 31)
77 P_A_MUTE
P_HEADPHONE IN 63
HCD-AZ2D/AZ5D
29 29
HCD-AZ2D/AZ5D
7-4. BLOCK DIAGRAM – AMP SECTION –

A/D CONVERTER
D771
IC503 STREAM PROCESSOR DIGITAL POWER AMP FEED BACK
IC506 IC512
+ G
FL, FR, SL, SR, C, SW FL
H 1 LIN (Page 29)
(Page 29) FR
DOUT 12 31 DATA OUTL1 11 2 PWM_BP OUT_B 29, 30 L.P.F. +
2 RIN FRONT L
BCK 11 30 BCK
OUTL2 9 17 PWM_AP OUT_A 25, 26 L.P.F. –
/OTW
/RST
/SD
15 SCKI OUTR1 6
LRCK 10 29 LRCK OVER LOAD
OUTR2 4 4 2 13 DETECT
PDWN
SCK Q721, 722
36 XFSIIN
SCDT
21 SCDT CLOCK
7 SCSHIFT
22 SCSHIFT XFSOIN 48 BUFFER
LAT1 IC515
23 SCLATCH
INIT X502
27 INIT DIGITAL POWER AMP
NSP MUTE XFSOOUT 14 49.152MHz
18 NSPMUTE IC513
OVF
24 OVF FLAGL FSOCKO 37
25 OVF FLAGR FSOI 38 2 PWM_BP OUT_B 29, 30 L.P.F. +
FRONT R
(AZ5D) A/D CONVERTER
17 PWM_AP OUT_A 25, 26 L.P.F. –
/OTW
/RST
IC502
/SD
STREAM PROCESSOR TM1100
IC505 OVER LOAD
SPEAKER
SL 4 2 13 DETECT
1 LIN Q751, 752
DOUT 12 31 DATA OUTL1 11
SR
2 RIN
OUTL2 9
BCK 11 30 BCK
15 SCKI OUTR1 6 OVER LOAD
LRCK 10 29 LRCK DIGITAL POWER AMP DETECT TM1101
OUTR2 4 Q661, 662
IC519
PDWN
SPEAKER
SCK
36 XFSIIN
SCDT
7 SCSHIFT
21 SCDT 4 PWM_A OUT_A 33 L.P.F. +
22 SCSHIFT SURR L
LAT3
23 SCLATCH XFSOIN 48
6 PWM_B OUT_B 30 L.P.F. –
INIT
NSP MUTE
27 INIT
XFSOOUT 14
14 PWM_C OUT_C 25 L.P.F. +
18 NSPMUTE SURR R
OVF
24 OVF FLAGL FSOI 38
16 PWM_D OUT_D 22 L.P.F. –
/RESET_CD
/RESET_AB
25 OVF FLAGR
OVER LOAD
/OTW
DETECT
/SD
A/D CONVERTER Q691, 692
IC501 STREAM PROCESSOR
5 15 2 3
IC504
SW
1 LIN
DOUT 12 31 DATA OUTR1 6
C
2 RIN
OUTR2 4
BCK 11 30 BCK
15 SCKI OUTL1 11 DIGITAL POWER AMP
LRCK 10 29 LRCK IC509
OUTL2 9
PDWN
SCK
SCDT
36 XFSIIN 2 PWM_BP OUT_B 29, 30 L.P.F. +
21 SCDT CENTER
7 SCSHIFT
22 SCSHIFT XFSOIN 48
17 PWM_AP OUT_A 25, 26 L.P.F. –
/OTW
LAT2
/RST
/SD
23 SCLATCH
INIT OVER LOAD
CLOCK 27 INIT
NSP MUTE 4 2 13 DETECT
BUFFER SCK 18 NSPMUTE Q631, 632
IC514 OVF
24 OVF FLAGL FSOI 38
X501 25 OVF FLAGR
12.288MHz
P_ADC_RESET 51 OVER LOAD
DIGITAL POWER AMP DETECT
SCDT Q571, 572
P_SM_DATA 1 IC507
SCSHIFT
P_SM_CLK 2
LAT1
P_SM_CS1 58 2 PWM_BP OUT_B 29, 30 L.P.F. +
S.WOOFER
P_SM_CS3 60
LAT3 17 PWM_AP OUT_A 25, 26 –
/OTW
(AZ5D) LAT2
/RST
/SD
P_SM_CS2 59
INIT 4 2 13 FAN MOTOR

P_SM_INIT 52 M901
P_SM_NSP_MUTING 53
NSP MUTE FAN M+12V SWITCH M (FAN)
OVF Q983
P_SM_OVF 57
FAN MOTOR D982
M902
CONTROL M (FAN)
SYSTEM CONTROLLER Q981, 982
IC401 (4/5) DIGITAL POWER AMP (AZ5D)
IC508 FAN MOTOR
DRIVE
Q984
2 PWM_BP OUT_B 29, 30 L.P.F. SIGNAL PATH
17 PWM_AP OUT_A 25, 26
: AUDIO
/OTW
/RST
/SD
4 2 13
PROTECT DETECT
Q657
P_SM_DRV_RST 56
P_SW_SD 55
P_SM_OTW 54
FAN DRIVE 50
HCD-AZ2D/AZ5D
30 30
HCD-AZ2D/AZ5D
7-5. BLOCK DIAGRAM – PANEL/POWER SUPPLY SECTION –
+1.8V
+1.8V REGULATOR
IC518
+3.3V
D+3.3V
REGULATOR
(FOR AMP SECTION)
IC517
+5V D953
A+5V REGULATOR
IC516
T101
DC/DC +9V
CONVERTER A+9V REGULATOR
IC951
FOR FLUORESCENT F1
INDICATOR TUBE F2
+9V
RECT
VP B– M+9V REGULATOR
D10011 – 1004
IC952
FAN M+12V
OSC
Q1005 +9V
DVD M+9V REGULATOR UNREG+12V
IC954 UNREG+12V
D397
µ-COM+3.3V
D400
D+3.3V
D951 +4V
A+3.3V REGULATOR
FLUORESCENT INDICATOR IC953
TUBE DRIVER
IC1001
+1.8V
RF+1.8V REGULATOR
SEG1 – SEG35
IC106
AD1, AD2,
3 – 39
+3.3V
SW+3.3V REGULATOR
OSC0 58 IC955
OSC
OSC1 59
COM2 – COM15 COM1, COM16
C1010, R1012 +3.3V

FL1001
40, 55
GRID DRIVE SYSTEM CONTROLLER +3.3V REGULATOR

FLUORESCENT IC105
Q1003, 1004 IC401 (5/5)
INDICATOR TUBE
(AC IN)
DA 63 5 ML9208 DATA
SWITCHING
CP 62 7 ML9208 CLK
REGULATOR
41 – 54
CS 61 6 ML9208 CS +3.3V
RESET 60 3 ML9208 RESET RF+3.3V REGULATOR
IC107
REMOTE CONTROL
RECEIVER 4 SIRCS
IC1040 +5V
D1030 SW+5V REGULATOR UNREG+7.5V
STANDBY LED 100 IC956
73 P_DISP_KEY (STANDBY) UNREG+7.5V
74 P_POWER_KEY
DIGITAL D+12V D+12V

95 KEY_1
S1030 – 1034, POWER AMP
S1035 – 1039, 1041 LED DRIVE D1006 – 1010 B+ 30.4V 30.4V
94 KEY_2 BACKLIGHT 24
Q1001, 1002 (BACK LIGHT) 30.4V
30.4V
KEY IN_1 –
82, 87, 81
KEY IN_3
D399
EVER+3.3V EVER+4V
AC-CUT 20
TS1 D394
TOUCH RESET RESET SIGNAL
DRIVE1 – DRIVE4
SENSOR RESET 12 SWITCH GENARATOR

84, 85, 83, 86
Q391 IC391
STBY RELAY 49 ON/OFF

XC-OUT
X-OUT
XC-IN
X-IN
REGULATOR DVD POWER

15 13 10 11 CONTROL SWITCH J
Q951, 952
(Page 29)
X402 X401
5MHz 32.768kHz
HCD-AZ2D/AZ5D
31 31
HCD-AZ2D/AZ5D
• Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location
Note on Printed Wiring Board: Note on Schematic Diagram:

• X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF)
• Y : parts extracted from the conductor side. 50 WV or less are not indicated except for electrolytics
• x : parts mounted on the conductor side. and tantalums.
• W : indicates side identified with part number. • All resistors are in Ω and 1/4 W or less unless otherwise
MAIN board TUNER UNIT
• f : internal component. specified.
• : Pattern from the side which enables seeing. • f : internal component.
(The other layers' patterns are not indicated.) • C : panel designation. MS-214 board
Caution: Note: The components identified by mark 0 or dotted line FL board

Pattern face side: Parts on the pattern face side seen from with mark ! are critical for safety.
(Conductor Side) the pattern face are indicated. Replace only with part number specified.
Parts face side: Parts on the parts face side seen from
• A : B+ Line.
(Component Side) the parts face are indicated.
• B : B– Line.
• Voltages and waveforms are dc with respect to ground KEY board
Caution: under no-signal conditions.
Pattern face side: Parts on the pattern face side seen from no mark : TUNER (FM/AM) VIDEO board
(Side B) the pattern face are indicated. ( ) : DVD PLAY EJECT board
Parts face side: Parts on the parts face side seen from [ ] : TAPE PLAY (DECK-A)
(Side A) the parts face are indicated. < > : TAPE PLAY (DECK-B) DMB10 board
〈〈 〉〉 : REC
• DMB10 board is multi-layer printed board. { } : PC
However, the patterns of intermediate-layer have not been in- * : Impossible to measure
cluded in this diagrams. • Voltages are taken with a VOM (Input impedance 10 MΩ). SWITCHING REGULATOR
• Indication of transistor Voltage variations may be noted due to normal produc-
tion tolerances.
C • Waveforms are taken with a oscilloscope. SIRCS board
Q These are omitted. Voltage variations may be noted due to normal produc-
tion tolerances.
B E • Circled numbers refer to waveforms. SP OUT board
• Signal path.
J : CD PLAY
c : DVD PLAY
Q I : DIGITAL OUT MIC board
F : AUDIO
B C E L : VIDEO S-MASTER board
a :Y
These are omitted. E : CHROMA
r : COMPONENT VIDEO
f : TUNER (FM/AM)
j : TAPE PLAY (DECK-A)
d : TAPE PLAY (DECK-B)
G : REC
h : VIDEO/SAT OUT
k : VIDEO/SAT IN
O : USB
N : MIC INPUT
• Abbreviation
AUS : Australian model
E2 : 120V AC area in E model
E3 : 240V AC area in E model
E12 : 220-240V AC area in E model
E13 : 220-230V AC area in E model (Russian model)
E15 : Iranian model
EA : Saudi Arabia model
KR : Korean model
MY : Malaysia model
PH : Philippines model
SP : Singapore model
TH : Thai model
HCD-AZ2D/AZ5D
32 32
HCD-AZ2D/AZ5D
7-6. PRINTED WIRING BOARD – DMB10 BOARD (SIDE A) – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6 7
B MAIN BOARD
NO953
A DMB10 BOARD (SIDE A) (Page 40)

• Semiconductor
Location
(AZ5D) Ref. No. Location
R319
R3801 D1001 B-4
R3607
(AZ5D) CN401
D3501 C-2
C3603
R3603
IC106 D3502 C-2
L3602
R3718
R3738
R3737 R3733 R3731
R3717
R3713 R3711
R3651
R3741 R3732
R3742 C3731
FL403 FB403
R3712
R3722 C3711
C3608 C307
FL401 FB402
R3802
FB401
C3712 C3732 C3801
C3734 R3736
IC101 D-6
C3714 R3716 C3606
R3714 R3734 IC102 D-4
C3701
R3715
R3735
C3713
C3733
C3703
C3609 FB405 IC103 C-4

R3721
C3605 FL402
(AZ5D)
C208 IC104 C-5
R215
R214
C206
C205
C3724 R3726 R3724 C3744 R3746 R3744 C403 IC106 B-4
B (AZ5D)
C402
5 R216
R3728
R3727
R3725
R3748
R3747
R3745
C3723
C3722
C3743
C3742
C3741 1 R209
C3721 (AZ5D) IC201 B-6
R3743 R210
R224
R3653
R3723 C305 C189
C210
R1527
12 1 R208
R219
13 Q103 E-4
C306 C187 FB404 Q3801 C-3
FB406
(Page 40) R227 48
CN105
D1001 FOR
CN302
E CHECK
R193
R191
(AZ5D) C190 R228
IC201
R233
C181
C179
MAIN BOARD C302
C167
CN201 (AZ5D) C180
CN202 (AZ2D) 24 37
C215
(AZ5D)
IC103 R107
R3757
25
R3758
R3777
R3778
36
C223
R3773 R3771 R3753 R3751 (AZ2D)
C224
IC104
R3761 R3752
C3772 C3771 C3752 C3751

R3772 R3804 C222 C221 C219
C C3774 R3776 R3774 C3754 R3756 R3754 D3501
C178
R3755
C3773
C3753
R3782
R3762
C217
R3775
C3705
C3707
R3781
D3502
C308 C3802 C177
Q3801
E FL107
C3784 R3786 R3784 C3764 R3766 R3764 C3803
R1105
R3805 C3804 C218 C220
C170
R3788
R3787
R3785
R3768
R3767
R3765
C3783
C3782
C3763
C3762
C3781 C3761 R1101 R1108

R3803
R1107
R3783 R3763 C3805 R198 RB108
R189 R1109
R1553 192 RB107
R190 129
R192 128
RB113
R195 193
R197
RB112
R1102
R103
R1549
R161 C102
R155 FB115
D R153 R152 R1557
CN106
R144 R1550 IC102 FB114
A
FB113
R1168
C153
FB112 MAIN
X101
BOARD
CN203
IC101
R142
C108
C152
R1545
(Page 40)
C145 C142
256
C138 65
C133
C150 C132
C137
C135 R2501
R2502
1 64
R4706
C226
C225
R136 C117
C116 C129
R234
C119
E R4705
CN202
R243
C
CN301
C105
D C118 C2501 MS-214
VIDEO BOARD
R117
FL101
BOARD E CN001
CN1201 Q103 (Page 39)
R116
(Page 53) C112 R101

C101
CN101 CN201
R1129
CN103
(FOR CHECK)
1-864-397- 11
F
OPTICAL PICK-UP
BLOCK
New part of EEPROM (IC103) on the DMB10 board can not be used.
(KHM-310CAB) Therefore, if the mounted DMB10 board is replaced, exchange new
EEPROM with that used before the replacement.
HCD-AZ2D/AZ5D
33 33
HCD-AZ2D/AZ5D
7-7. PRINTED WIRING BOARD – DMB10 BOARD (SIDE B) – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5
DMB10 BOARD (SIDE B)

A • Semiconductor
(AZ2D: E2/AZ5D: E2)
(AZ5D) Location
R3609
Ref. No. Location
D3601 B-5
(AZ5D)
(AZ2D)
R3602
C3604
AZ2D: SP, MY, KR, PH/ D3602 B-5
C3607
AZ5D: SP, MY, TH 11
R3601 10
(AZ5D) IC105 B-2
C3602
L3601
IC107 E-4
C3611 C3621
R3606
R5009
R5008
C3601
R5017
R5016
R5014
C3610 IC301 B-4

20 1
R3621
IC3601 IC3601 B-5
D3602
R3611
(AZ5D) IC3711 B-5
R3605
D3601
C3704 R3739
AZ2D: E3, E12, E13, E15, EA, AUS/ IC3731 B-4
B
R204
C301
R314
AZ5D: E3, E12, E15, EA, AUS R3719 IC3751 C-4
R3652
C233 R212 R207 IC3731 IC3771 C-5
R206
12 1 C3702
C203
R221 13 48 IC3711
R205
R213
R220
Q101 E-3
R1134
R226
Q102 E-3
C209 IC301 R3749 R3729
C212
C211
Q2001 E-1
R3759
C214 FL108
C213
R222
24 37
R223
R225
R1110 IC3771
C3708 R3779
R230 25 36
R231 R232
IC3751
C3706
FL104
RB105 RB106
R3501
FL106
R4513
C191 R3769 R3789
C (AZ2D)
RB111 RB104
R1103
R1104
RB103
C175 R1161 R1125

C173 R1126 R1124
C164
R1546 C176 C174 C172 C171 C163 R1123

R164
R1122
R1502
C162 R1554 R1121

C161
R1504 R1552 R1120

R1551
R1530 C159
C158
C160 R160 R151

D R1503 R1548
C156
R1151 R1531
R1152
R143
C155
R1540
R146
C154
R1547
R1150
FB111 (AZ2D) R1542

C109
C149
C148 R141 R1524

C144
C130 C140 C146
C151
R1526
R104 C147
C136
C143 C141
R169
C131
C124
C128 R127 C125

R105
R106
C139 R138
C115
R196
C127 C123
IC107
R1133
Q2001 FL105
R135 C196 C122
R238
G
C114
C195
R239
R236 C121 4 3 C192

D R134
S C126 5 1
E C182 C120 R4704
R126
C193
R123
C113
R237 5 4 R133
R111
R4703
C188
1 3
IC105 Q1022C 2B R124
1E R113 R4702
C184 R121 R321
R187 R120 R112 2D1G 1S R4701
R247 R118 2E 1B1C R115 Q101
R246 R110 R109 2S2G1D
C106 R108
R114
F
1-864-397- 11
HCD-AZ2D/AZ5D
34 34
HCD-AZ2D/AZ5D
7-8. SCHEMATIC DIAGRAM – DMB10 BOARD (1/4) – • See page 60 for IC Block Diagrams.
(Page 37)
A22
A24
A21
A23
A20
A25
A17
A26
A18
A16
A19
(1/4)
EEPROM
IC103
BR24L64F-WE2
C167
CN106 0.01
13P
MSW A0 VCC
R193
OCSW1 A1 WP
(Page 37) R1546 3.3k 1k
A5 SYSRST A2 SCL
C108 0.001
A4 3.3V_MNT GND SDA
C109 0.001 FB111 R1150 3.3k R191
A3 XIFCS
1k
FB112
(Page 37) A2 IFBSY
FB113
SIO
FB114
S0O
R1152 3.3k
CN101 MREQ
FB115 R1151 3.3k
24P
SCO
(Page 44)
GND (LD) D-GND
CN105
DVD_LD 6P
LD (650) MIC
R1502 R1545
0 0
NC VOICE (N.C) TXD
OCSW1
MREQ
NC KRMOD RXD
KRMOD
SDA
SCL
MIC
PD GND
CD_LD (FOR CHECK)
LD (780) +3.3V
VR (650) V2REFO
*IC101
VR (780) RFMON
R5008 0 S29JL032H70-SBS2-0503UC(AZ2D:E2)
NC
VOE S29JL032H70-SBS2-0503CE(AZ2D:E3,E12,E13,E15,EA,AUS)
VOE/E+G (AZ2D) S29JL032H70-SBS2-0503GA(AZ2D:SP,MY,KR,PH)
FL101 S29JL032H70-SBS1-0503UC(AZ5D:E2)
VCC R5009 0 KRMOD
C101 R116 FLASH ROM S29JL032H70-SBS1-0503CE(AZ5D:E3,E12,E15,EA,AUS) KRMOD
VC MIC
0.01 1k S29JL032H70-SBS1-0503GA(AZ5D:SP,MY,PH)
(AZ5D) MIC
GND (PDIC) IC104 IC101 (Page 37)
VOF R5010 0 HY57V64162 *
VOF/F+H 0HGTP-HDR
VOB A16 A17
AZ2D:E2/ SD-RAM R1110
VOB/B A15 A16 2.7k
VOA AZ5D:E2 VSS VDD A15
VOA/A RA4 RA3 A14 BYTE
R5014 0 A4 A3 A14
RF RA5 RA2 A13 VSS
A5 A2 A13 A0
(LO:DVD.HI:CD)MSW RA6 RA1 A12 DQ15 SCL
VOD R101 AZ2D:E3,E12 A6 A1 A12 HD7 SCL
VOD/D RA7 RA0 A11 DQ7 SDA
100 E13,E15,
VOC A7 A0 A11 SDA
VOC/C EA,AUS/ RA8 RA10 A10 DQ14 (Page 38)
TRK- A8 A10 A10 HD6
TRK- AZ5D:E3,E12, RA9 BA1 A9 DQ6
TRK+ Q101-1 E15,EA,AUS A9 BA1 A9
TRK+ RA11 BA0 A8 DQ13
CD ON
FCS+ A11 BA0 A20 HD5
FCS+ SWITCH R5016 0 RCS A19 DQ5
FCS- NC /CS A21 R104 0
FCS- Q101-2 DRCKE RAS A20 DQ12 OCSW1
CKE /RAS HD4 OCSW1
DVD ON AZ2D:SP,
DRCLK CAS WE DQ4 (Page 36)
TRK- SWITCH MY,KR,PH/ CLK /CAS
TRK- DQM1 RWE RESET VCC
Q101 AZ5D:SP,
TRK+ UM6K1N-TN UDQM /WE R105
TRK+ MY,TH DQM0 N.C. DQ11
10k
R106 10k
FCS+ NC LDQM HD3
FCS+ R5017 0 N.C. DQ3
R117 C180
FCS- VSS VDD
FCS- 47k RD8 0.1 RB106 RY/BY DQ10
DQ8 DQ7 47 A19 HD2
(Page 36) -2 -1 RD7 A18 DQ2
VDDQ VSSQ A18
S S Q102-1
RD9 RD6 A17 DQ9
AUTOMATIC POWER DQ9 DQ6 A8 HD1
CONTROL(FOR CD) RD10 RD5 A7 DQ1
DQ10 DQ5 A7
Q103
RD4 A6 DQ8
RT1N241C Q102-1 VSSQ VDDQ A6 HD0
-TP-1
REG01 RD11 A5 DQ0
R108 R111 AUTOMATIC POWER DQ11 DQ4 A5 XRD
1M 100 INVERTER
CONTROL(FOR DVD) RD12 RB105 A4 OE
DQ12 DQ3 47 A4 MREQ
(Page 37)
R121 R124
RD3 A3 VSS MREQ
22 47k
VDDQ VSSQ A3 XROMCS
REG02 RD13 RD2 A2 CE
R107 10k DQ13 DQ2 A2 A1
R112 R113 R115 R118 R120 RD14 RD1 A1 A0
22 22 22 22 22
DQ14 DQ1
C102
(Page 36) IOP RD0 0.01
C105 C112 VSSQ VDDQ
R109 R110
0 47k 47 47 RD15
A6
6.3V 6.3V DQ15 DQ0
A13
(Page 37)
-1-2
VSS VDD XWR
A7 A14
DVD_LD FL108 C179
C191 0.1
A8 A15
Q102 0.1
CD_LD QST8TR C190 C181
47
0.1
(Page 37) R114 R1129 C106 C113 6.3V
A27
100k 100k 0.01 0.01
A11 A28
CN103
5P A29
A30
(Page 37)
RF
GND A31
FE
FE A32
(FOR CHECK) TE
TE A33
+1.8V REGULATOR
PI
PI IC106 IC105
R187 FL107
PQ018EZ01ZP 0 TK11133CSCL-G
SW+3.3V
NC
CONT SW+5V
VOUT
VIN
CONT GND R1133 GND
D1001
0 (Page 36)
VIN
RB501V-40TE-17 NOISE
GND VOUT
C184 C178
0.01 47
4V
C187 R169
C189 R1134 C182 C188 10k
47 RF+3.3V
0.33 4V 0 +3.3V REGULATOR 0.22 0.22
(Page 36)
+3.3V REGULATOR A1
IC107
TK11133CSCL-G RF1.8
R126
0 V2REFO (Page 37 )
CONT
VIN
GND
NOISE
VOUT
C192
0.01
C193 C195
0.22 0.22
HCD-AZ2D/AZ5D Therefore, if the mounted DMB10 board is replaced, exchange new
35 35
HCD-AZ2D/AZ5D
7-9. SCHEMATIC DIAGRAM – DMB10 BOARD (2/4) –
R223 100k
(2/4) R225 100k
(Page 44) CN401

5P
IOPMON
FB402 FL401 FB404
VREFO SW+5V SW+5V
C233 0.0047 R220 10k
SPFG D-GND
FB403 FL403 FB406
(Page 37) SW+3.3V SW+3.3V
C402 C403
C211 0.033
A12 R230 R231 R232
82k 15k 18k M+9V 47 47
16V 6.3V
M-GND GND (Page 35)
R221 C209 C212 R234
56k 0.033 0.01 10k C217 FB401 FL402 FB405
47
R212 10k C215 0.01 16V
R226 C214 R233
56k 0.001 33k
FCS-
FOCUS/TRACKING COIL DRIVE, SW+5V

SPINDLE/SLED/LOADING MOTOR DRIVE
SW+3.3V
GND
(Page 38)
R208 FCS-
FCS-
33k
FOO FCS+ FCS+
FCS+
C205 R214 TRK+
220p 15k TRK+ TRK+
TRK- (Page 35)
TRK-
R206 10k TRK- CN201
6P
SP-
TRO SP-
C224 SP+
R209 C206 R215 0.01 SP+
220p 12k
33k
LIMIT
R246
(GND)LIMIT
4.7k
SL-
SL-
C219 SL+
SL+
0.01
R247
1k
C218 C220 R238 R236 LIMITSW
10 10 1k
4.7k
16V 16V
SL- OCSW
R204 R207 C203 C225
1.2k 2.7k 0.01 C221 0.001 CKSW
0.1 SL+ S
R237
(Page 37)
RF+3.3V
1k CN202
Q2001
R205 10k SP- 7P
(Page 35) 2SK1828TE85L C226
R239 0.001
C222 SWITCH OCSW1
4.7k
FMO 0.1 SP+
CKSW1
R210 R216 C2501 R243 100
12k GND
47k 0.001
IC201 LDM-
C208 0.01
FAN8036L
LDM+
R213 R2501
NC
6.8k C223 4.7k (Page 39)
0.1
TRG_SW
R2502
1k
TRG-SW
(Page 37)
DMO
R224
R219 C213
10k
27k 0.01
OCSW1
R222 C210
33k 0.01 (Page 35)
TROPENPWM
IOP
REG02
(Page 35) REG01

R227 0
FWD
R228 0
REV
MUTE123
(Page 37) MUTE
TSD_M
HCD-AZ2D/AZ5D
36 36
HCD-AZ2D/AZ5D
7-10. SCHEMATIC DIAGRAM – DMB10 BOARD (3/4) – • See page 59 for Waveforms. • See page 67 for IC Pin Function Description.
(Page 38) (Page 35)
ASDATA1
ASDATA4
ASDATA2
ASDATA0
SPDATA
KRMOD
ALRCK
SPDIF
ABCK
XRST
ACLK
MIC
R1120 0
(3/4) R1121 0
R197 150 R1122 0
R1531 0
R1530 0
R1526 0
R1524 0
R151 47
R153 47
R155 47
R160 47
R195 150 R1123 0
(AZ2D) (AZ5D)
R192 150 R1124 0
R143 R146 R1527
R190 150 R1125 0
100 47 0
R189 150
R1550 4.7k
C152 12p
C153 12p
R1549 4.7k
C159 0.01
C150 10 16V
R1548 4.7k
R1551 4.7k
C135 0.033
R138 100k
C156 0.01
C139 22p
R136 15k
R1102
C130 0.1
C132 0.1
C137 0.1
C140 0.1
C141 0.1
C143 0.1
C146 0.1
C149 0.1
C161 0.01
0.01
R103 10k
R1547 4.7k
R1540 4.7k
150
C145 1
R1168 470
(AZ2D)
C163
R1542
RF1.8 X101 R1552 10k
27MHz 10k CN301
A1 13P
V2REFO RGBSEL
(Page 35) R321 0
DSEL
R4701 0
C138 0.001
R142 100k
Cr/R
R141 750k
C151
C142 0.1
C154 0.1
0.001
WIDE
C133 C147 C148 R4702 0
Cb/B
0.1 0.047 0.047
R4703
D-GND
R144 0
0
R1543 Y/G
10k
R4704
0 D-GND
Y
R4705
(Page 54)
D-GND
0
C
D-GND
V
R4706
0
A2
C120 1 R1553 0 R1101 2.2k
C121 1 MSW
C122 1 C170 0.01
C123 1 R1161 0 R1126 10k

(Page 35) A3 (Page 35)
C124 1
A4
A5 FWD
VOA
REV
VOB
MUTE123
VOC
MUTE
VOD R1103 R1104 (Page 36)
10k 10k
R1105 10k
TSD_M
C171 0.01
CKSW
OCSW
LIMITSW
VOE (Page 36)
VOF R1107 0
C172 0.01
R1108 10k
R1109 0
A6
R123 0
A7 R1554
4.7k
C125 0.1
A8
(Page 35)
A11
PI C173 0.01
RA4
RA5
RA6
VREFO
FE RA7
C117 10 16V
C118 10 16V
C119 10 16V
RF AMP,SERVO DSP,MPEG DECODER

TE
IC102
C114 0.1
C115 0.1
C116 0.1
CXD9804R
C126 0.1 RA8
RA9
RA11
C196
0.0047
DRCKE
DMO DRCLK
FMO C174 0.01
TROPENPWM C176 0.01
(Page 36) IOPMON RB104 0

TRO C175 0.01
FOO RA3
RA2
A12
RA1
RB103 0
RA0
RA10
SPFG
R133 3.3k BA1
R134 3.3k BA0
R135 3.3k
R127 100 RB111

0
C127 0.01 RCS
A2 RAS
A3 CAS
A4 RWE
A5 DQM1
A6
A7 RB108
22
A8 RD8
A18 RD9
A19 RD10
RD11
C128 0.0015 RD12
RD13
RD14
RD15
R196
0
RB107
22
A28
A29
A30
FL105
A31
A32
A33
(Page 35)
C136 0.01
C144 0.01
C155 0.01
C162 0.01
C164 0.01
R1557 100
A27
0.01
FL106
R161 100
C131 2.2
R1504 0
R152 0
C177
C158
47
C129 6.3V
10
16V
C160 FL104
XROMCS
0.01
RB112
22
XWR
XRD
HD3
HD0
HD5
HD6
HD1
HD7
HD2
HD4
A21
A20
A13
A15
A10
A16
A11
A17
A14
A12
RB113
A1
A0
A9
22
R164
A13 100
RD3
RD0
RD6
RD5
RD1
RD7
RD4
RD2
DQM0
A14
A15
R1503
(Page 35) 0
A22
A24
A21
A23
A20
A25
A17
A26
A18
A16
A19
MREQ
TRG-SW
(Page 35)
(Page 35)
(Page 36)
HCD-AZ2D/AZ5D
37 37
HCD-AZ2D/AZ5D
7-11. SCHEMATIC DIAGRAM – DMB10 BOARD (4/4) – • See page 60 for IC Block Diagrams.
R3781 R3783 R3788

(4/4) ART-
1.5k 3.9k 4.7k
RT
C3781 C3782 R3786 R3787

0.0018 0.0022 1k 1k
ART+
MIX AMP
R3782 R3784 R3785 C3783 C3784
1.5k 3.9k 4.7k 330p 330p IC3771
NJM3414AV(TE2)
LT
VDD
VSS
C3707 C3708 R3789
0.1 0.1 1k
(AZ5D)
R3779 1k
A/D CONVERTER
R3611 100
R3772 C3771 R3774 C3773 R3776
IC3601 1.5k 0.0018 3.9k 330p 1k C3774
PCM1803DBR R3621 100 ALT+
330p
C3610 0.1
R3771 R3773 R3775 C3772 R3777 R3778
C3621 0.001
C3611 0.001
C3609 10 16V ALT- 1.5k 3.9k 4.7k 0.0022 1k 4.7k
C3608 10 16V
C3607 0.1 ROUT3- R3761 1.5k R3763 3.9k R3768 4.7k (AZ5D) SW
R3609 0
GND C3761 C3762 R3766 R3767
0.0018 0.0022 1k 1k
R3605 0 C3606 0.1 ROUT3+
MIX AMP
L3601 10µH
C3605 R3762 R3764 R3765 C3763 C3764
SW+3.3V 47 L3602 1.5k 3.9k 4.7k 330p 330p IC3751
10µH NJM3414AV(TE2)
C3603 6.3V
(Page 36) SW+5V
R3601 100 0.1 FC
SPDATA VDD
R3606 0
R3607 R3603
C3601 C3602 0 10k
10 0.1
D3601
VSS
1SS355TE-17
R3602 C3705 C3706 R3769
100 0.1 0.1 1k
D3602
1SS355TE-17 R3759 1k
SPDIF
R3752 C3751 R3754 C3753 R3756
1.5k 0.0018 3.9k 330p 1k C3754
LOUT3+
330p
R3751 R3753 R3755 C3752 R3757 R3758

R3651 C306 LOUT3- 1.5k 3.9k 4.7k 0.0022 1k 4.7k
0 C301 100
0.01 6.3V CN302
17P(AZ2D)
R314 100 ROUT2- R3741 1.5k R3743 3.9k R3748 4.7k SR
XRST C305 (AZ2D) 19P(AZ5D)
0.47
R3653 0
C3741 C3742 R3746 R3747 R3501
LOUT1+
ABCK D-GND
LOUT1-
0.0018 0.0022 1k 1k 0
R3652 0 ROUT2+
ACLK MIX AMP SPDIF
R3742 R3744 R3745 C3743 C3744
1.5k 3.9k 4.7k 330p 330p IC3731 D-GND
NJM3414AV(TE2) RT
(Page 37) Rt
SL
VDD A-GND
LT
Lt
A-GND
SW
VSS SW
FC
C3703 C3704 R3749 FC
0.1 0.1 1k
SR
SR
R3739 1k SL
SL
R3732 C3731 R3734 C3733 R3736
ROUT1+ A-GND
ASDATA4 LOUT2+ 1.5k 0.0018 3.9k 330p 1k C3734 FR
330p
ROUT1- FR
ASDATA0
R3731 R3733 R3735 C3732 R3737 R3738
LOUT2+ A-GND (Page 41)
1.5k 3.9k 4.7k 0.0022 1k 4.7k
ASDATA1 LOUT2- FL
LOUT2- FL
ASDATA2
ROUT2+ A+5V
ALRCK D/A CONVERTER ROUT1- R3721 1.5k R3723 3.9k R3728 4.7k FR
ROUT2- C3801 A-GND
IC301
100
AK4358VQ-L LOUT3+ 6.3V C3721 C3722 R3726 R3727 L-IN
0.0018 0.0022 1k 1k
SCL ROUT1+
R3801 R3802
LOUT3- 0 0 MIX AMP A-GND
SDA
R3722 R3724 R3725 C3723 C3724
ROUT3+ C3805 1.5k 3.9k 4.7k 330p 330p IC3711 R-IN
NJM3414AV(TE2)
R3804 R3803 47
(Page 35) ROUT3- A-GND
18k 10k 4V FL
D3501
ALT+ VDD
1SS355TE-17
(AZ5D)
ALT- C3804
47 D3502
6.3V
1SS355TE-17
VSS
C3802
C3803
10 R3805 100 C3701 C3702 R3729 C308
1k 0.1 0.1 1k 0.1
4V
R3719 1k
Q3801
2SC2712-YG
R3712 C3711 R3714 C3713 R3716
CENTER VOLTAGE GENERATOR
LOUT1+ 1.5k 0.0018 3.9k 330p 1k C3714
330p
R3711 R3713 R3715 C3712 R3717 R3718

C307 1.5k 3.9k 4.7k 0.0022 1k 4.7k
C302 100 R319 LOUT1-
0.47 6.3V 0
ART+
ART-
HCD-AZ2D/AZ5D
38 38
HCD-AZ2D/AZ5D
7-12. PRINTED WIRING BOARD – MS-214 BOARD – 7-13. SCHEMATIC DIAGRAM – MS-214 BOARD –
• See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5
1 2 MS-214 BOARD
A CN001
7P
MS-214 BOARD TRGSW 1 M001

(LOADING)
NC 2
C LDM+ 3
DMB10 LDM- 4
S002 BOARD
(2/4) GND 5
(CHUCKING) CN202
(Page 36)
CKSW1 6
A S002
B OCSW1 7
S003 S001
(TRIGGER) (DISC IN/OUT)
S001 S002 S003

(DISC IN/OUT) (CHUCKING) (TRIGGER)
C
S003 S001 M001
(LOADING)
B
1-862-780-
CN001
6 2 11
7 1
(11)
C C (Page 33)
DMB10
BOARD
CN202
HCD-AZ2D/AZ5D
39 39
HCD-AZ2D/AZ5D
7-14. PRINTED WIRING BOARD – MAIN BOARD – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
• Semiconductor Location 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Ref. No. Location Ref. No. Location
TAPE MECHANISM TAPE MECHANISM
D1 J-5 Q101 E-12 BLOCK (DECK-A)
SUPPLIED WITH THE
TS1
TOUCH
BLOCK (DECK-B)
SUPPLIED WITH THE
D71 G-7 Q103 D-14 A G FL BOARD

CN1001
(Page 55) ASSEMBLED BLOCK SENSOR H KEY BOARD
CN1030 (Page 57)
ASSEMBLED BLOCK
MAIN BOARD
D72 F-7 Q104 E-14
R330
D181 F-7 Q140 B-11 Q326
R324 Q323 Q328 Q321
R362
R365
E E E E
D182 F-7 Q141 J-7 C361
R373
R372
C364 C363 C362
R325
R367
R368
R327
R332
D322 R331 D321 Q362 HP301 HRPE301
JW460
R364
D183 F-7 Q151 D-11 JW552
C324 JW553 CN304 Q363
(PB) (REC/PB/ERASE)
C322
R328
JW468
(DECK-A) (DECK-B)
R361
R321
JW550
JW554
E E
D261 F-3 Q153 B-11
JW456
R366
R363
R374 Q361 E
E Q327 JW466 E Q324 E Q329 E Q322 R369
JW474
JW458
JW459
(CHASSIS) JW496 JW498
R329
CN303
D262 F-3 Q154 E-14 B R322 R378
JW469
JW473
R375 JW494 JW495 JW497 Q153 CN302
R133
JW551 R326 R323 R379
R371 R376
D321 B-7 Q171 J-7
R303
R380 JW531 CN301
R180
R377 Q140 FB30
FB34
JW465
JW467
R160
Q303
E
JW503
E 1 3 C351 1 JW517 8
R159
D322 B-6 Q191 J-7 JW457 R381 C166 C167 JW520
EP902
C301
FB50 E
JW478
C151 C196 Q314
E
C353
Q353
FB80 FB84
FB54
C303
JW470
JW476
JW472
JW518
R164 C302
D391 G-4 Q201 D-7 JW532 C352
JW455
E
R198
R353
JW450 C165 JW557
JW493
C399
D392 G-4 Q251 D-7 JW471
R197
JW492
JW449 JW463 JW501 E
JW177 C169 JW516 Q315
JW448 JW464 JW534 JW500
D393 G-4 Q260 E-10 JR124 JW566 C122 C354 JW515 C314
JW454
C304
R161
JW484 JW488 Q301
C150
R148 R305
E
R302
JW483 R147 E JW514
D394 G-4 Q261 E-9 C JW519
C999
JW509
JW442 JW447
R301
11 1
R163
C152 JW508
JW482 JW499 C125 C315
JW502
JW441 JW446 C305 R355 C355
JW477
10 CN111 2 JW487 R162 C198 C127 JW507 Q302
D395 F-6 Q262 D-5 CN113 Q351 R319
JW491
CN112 JW479 JW481 E
JW445 JW462 E
JW461 C189 C197 Q352
JW440 JW444 JW480 R129 C126 T301
D396 F-7 Q263 D-5
JW451
JW452
JW486 FB101 R354 C356
JW383
R351 R304 BIAS OSC
JW453
C119
C132 C168 C307
R318
C131
R309 R306
(AZ5D)
R311
R313
JW485
D397 F-7 Q270 E-8 JW505
JW490
C134 1
L351
R266 80 JW558 R352
L301
JW443 C121 E
C306
R253 R121
Q311
JW489
C252
R123
JR119 JR120 JR121 JR122 JR123 C133 R132 R131 C148 C147 R356 C312
D398 F-7 Q271 E-8
R263
JW511
R265
JW359 E R251 R122
C159 R317
R312
CN201
C118 E R307
R267
JW377
JW378
JW504
C358 C313
R252
R153 C155
IC101
Q313
JW358 R262 R290 R284
R154
D399 E-4 Q272 D-7 R281 R278 Q251
C135
C158 R114 C308 C357
JW381
JW382
JW380
JW379
C265 C267 R151 65 R113 R357
Q312
Q274
Q273
Q272
Q263
Q276
JW376
21 Q201 C157 E
JW567
R202 C117
C251 R155
D400 G-7 Q273 D-6
JW512
JW513
Q262 E E E E 20 R112 R359 R316
D JW357
C160 24 C340
JW432
C156 JR132 C161 64
R288
R279
E E R289 R280 R277 E
R264
JW387
JW388
R283 C202 R203 R110
D951 I-6 Q274 D-6 JW356
C264 C266 R201 JW407
C163 C162 C115 E C310 C311
JW545
Q103
R157
JW349 JW355 C201 (AZ5D) 25 C129 E
R119
(AZ5D)
R169
R320
R282
R276
JW364 Q275 R111
D953 J-11 Q275 D-8 C116
R102
JW348 JW353 R285 R204 JW404 C164 Q318
JW362 JW363 C177 R130
R310
R156 L311
JW413
(AZ2D) (Page 51)
R205
E JR130 E Q317
C203
JW352 C276 C274 C273 C272 R286 JW405 JW406 Q151 (AZ5D) C146
D954 J-12 Q276 D-6 JW361 C275 C254 R174 MIC
JW367
R291 C130 R109 E E Q316
JR131
(AZ5D) (AZ2D) R287 E E C123 BOARD
R260
JW351 R128 40 41
JW510
C204
JW373
JW374
JW375
JW360 R293 JW403 C178 C139
R292
FB201 C112 CN1050
D955 J-12 Q277 E-8
JW366
JW350 C176 R120 R314 R315
R261
E R158 C101
JR112 Q260 R175 Q104 Q154 E
JW354
JW561
JW365
2 C124 C154
J
R480
JW544 C277 JW402 JW435
JW522
C29 C30 1
D981 J-11 Q301 C-14
JW385
JW384
C179
Q261
Q277 C262 C173 JW421 JW431
R152
JR111 JW401
R270
CN202
JW296
R341
R347
IC261
JW392
S G R28 Q270 JW412 C174 C113 JW536 1 CN103 8
R118
R168
R482 E
JW368
JW369
D982 J-10 Q302 E-13 JR110 C270 JW400 C110
R29
JW294 JW399
JW341
R127
C89
E
R126
Q464 JW276 R342 C128
R87
C108 C106
R234
(AZ2D) R271 E 1 R107 R106
D JR109 E JW398
CN100
C235 C390 JW434
D983 J-10 Q303 B-14 JW529 JW275 R481 C107 JW433
Q30
JW270
JW526
JW370
JW372
JW371
R272
R343
R235
R255
R254
C253
C271 C90
R88
R27
R498
R496
JW274 JW293 JW523 E R344 E C85 R91 R81
F
JR127
R444
R443
R491
JW298 Q341 Q342 JW419 2 C109 JW430 R85
R90
D984 J-11 Q311 D-14 E R274 Q271 C114
JW391
JW302
JW301
JW292 JW297 JW397 R345 JW420 C103 C104 C102
JW299
JW300
JW411 R86 S-MASTER
R273
E
JW386
DMB10 JW273 D399 R487 R483 R104 R105 E
R275 (AZ5D) R60 BOARD
Q312 D-14 JW128 E
JW277
BOARD
JW286 JW521 JW396 E
CN302 JW271 JW290 R485 JW418 Q101 JW429 Q81 NO501
JR117 R189 IC3 C87 (Page 46)
R495
R494
JW439
(Page 33) R103
R484
D182 JW390 C111
R486
Q343
R490
JW281
IC1 I-5 Q313 D-14 R475 R47 JW395 JW417
JW408
R108
D181 JW437
R41
R37
JW389 JW424 R50
R38
R46
C105
R44
C140
JW305
JW306
JW307
JW560 R452 R451 R465 JW304 JW416 C75
JW288
D397 JW394 JW423 C77
CN101 R101
R43
IC3 F-14 Q314 B-15
JW409
JW410
R40
C36 C35 C34 C33 JW428 Q71
JW282 JW291 JW287 R76
R78
JW278
JW303 R188
JW218
JW219
JW220
E E E JW415 R75 E
JW393 JW414
D262
D261
JW285 D398 R186 JW422 JW427 C70

JW280
IC101 D-12 Q315 C-15
D395
JW535 E
R48
D396
Q36 Q35 Q34 Q33 JW426
JW438
R447 JW284 C183 JR116
F JW319 C79
R80
JW269 R45 R42 R39
JW310
IC231 J-3 Q316 E-15 JW272 JW543 JW279 JW283 JW289 D183 JW308 JW425 JW436
JW221
CN203 JW317 JW318
JW320
A
JR108
R405
C74
JW322
R407
JW238
JW321
C400 JW242 R93
JW323
JW324
JW325
JW327
JW328
JW329
JW330
JW331
JW332
C82
IC261 E-9 Q317 D-15 DMB10
BOARD C498 R472 R492 81 80 E
R462 R187 JW309 JW316 R33
E
R31
C31 E
C94 R71
JW564
CN106 R473 R493 D72
JW315 E
JW311
JW312
JW326
JW339
C499
IC391 G-4 Q318 D-15 JW241
JW214 R401
(Page 33) R61
CN102
R400 Q465 R463 R74
JW243
JW562
JW244
JW217
Q82
(AZ5D: EA, AUS) C260 R402 R32
C464
JW240 JW314 Q31 R94 Q83
R98
R497 D400
R406
R404
JW335
JW336
JW337
IC401 G-6 Q321 B-7
JW215
JW216
R82
IC401
JW338
C462 JW239 R35
R77
(AZ5D) R73
R409
JW524 JW210 100 C32 R92
Q22
Q32
R459
C73 JW344
D71
JW313
R454 R458
Q73
IC951 H-10 Q322 B-7 JW212
E
(AZ5D) R36 E
JW184
JW542 JR105 (AZ5D) R34
JW236
JW237
JW209 R84
JW563
51
R396
JW246 R460
R457
D391
C93
JW342
JW343
JW345
1
IC952 J-10 Q323 B-6 Q391 R72 E
D393
D394
C410
C72
G
JW255
JW256
JW245
JW247
JW248
JW249
JW333
JW334
JW234 R455
50 R83
JW250
JW251
JW253
JW254
R392 E (Page 53)
IC953 I-10 Q324 B-6 R395
JW546
JW231
R471 VIDEO
X401
JW208
JW230
R411 BOARD
JW232
JW233
JW235
JW204 R393 C411
JW205
JW257
JW258
IC954 H-13 Q326 B-6 JW213
X402 R413 CN1202
R394
C393 R417
JW528
R438
C391
K
D392
R391
C412
IC955 H-13 Q327 B-6 (FOR CHECK) JW206

IC391
5 4
JW222
R420
30 31 R437 R464
JW223 JW229 R408

C416 R419
IC956 H-14 Q328 B-7 1 4 1 3 JW207 JW228
B
JW172
JW173
JW174
JW175
JW267
CN401 C392
R415 R429 JW224 R403
R445
JW171
R434
R432
JW951
JW211 R469
JW259
DMB10
Q329 B-7 R446 E E
JW138
JW139
JW140
R416 R430
Q951
Q952
JW142
R422
JW225 JW533 JW537
JW168
JW167
BOARD
JW141
JW166
JW169
JW525 C417
R441
R421 JW565 JW265 JW268 CN401
R436
Q1 J-6 Q341 E-11 R424
JW226
1 3 1 5 JW264 JW266
R951 (Page 33)
R426
R425
R428
2 1 JW227
H
JW555
FM 75Ω TUNER R427 C951 NO955 NO953
Q11 J-5 Q342 E-11
R431
COAXIAL 4 1 4 1 4 1
JW108
R433
JW180
JW109
UNIT R435
C241
JW260
CN206
R439
R440
ANTENNA SUPPLIED
Q12 J-5 Q343 E-11 AZ2D: E2/
IC954 IC955 IC956
IC951
JW162
JW263
WITH THE 1 JW262
JW110
JW111
AZ5D: E2
EP901
AM ASSEMBLED
Q13 J-6 Q351 C-14 BLOCK
JW136
JW137
L241 8 9 R296
JW129
JW130
JW131
JW135
JW156
JW157
JW158
JW159
JW160
JW161
R295 3
JW132
JW133
JW134
JW154
JW155
Q22 G-7 Q352 C-14
C958
JW185 (CHASSIS)
C952
JW103
JW539
JW102
JW559
R245 C957
JW164
JW340
JW200
C991
JW165
JW176
JW475 C959
R246 JW183 C990 C992
Q30 E-7 Q353 B-14
JW178
AZ2D: E2/ C955
JW347
JW104
JW179
AZ5D: E2
JW195 JW197
JW198
Q31 F-10 Q361 B-11 1 JW541
R59
R58
R57
C980
JW125
C16
JW126
JW127
JW163
JW124
C53
Q32 G-10 Q362 B-11 I

JW261
JW112
JW149
JW152
JW151
JW170
JW150
JW144
JW145
JW146
JW147
JW148
C15
JW196
JW252
IC953
D951 JW189
C54
C51
JW114 R51
3
JW121
JW122
JW123
JW190
JW153
JW199
JW201
JW202
Q33 F-9 Q363 B-10
JW191
JW192
C52
JW203
X11
JW143
C2 JW115
JW116
JW527
FB980
C956
R16
R17
Q34 F-8 Q391 G-5

JW113
D956
C12
R8
JW538
R54
(AZ2D) IC1 R53

JW120
C3
Q983 1
C17
C1
R1
Q35 F-8 Q464 E-4
C11
JW193
E E C B JW182
C144 C142 C194 C192 1
JW549
JW548
JW101
R7
JW547
L1 Q171 C953
C13
Q36 F-8 Q465 F-6
JW903
R172
R171
R9 D953 C950
IC952
JW119
C200 C14 R11 Q13 C4 R3 R4 JW540 3
CN951
R20
JW105 E
R173
Q51 J-7 Q951 H-14 C231 JW188
R982
L231
JW117
JW118
JW106 R196 R146 R141 R195 R192

R10
1 2
D983
JW107 (AZ2D)
C981
1
R191
CN955 C983
R18 E R19 CN954
R21
R142
R145
4 3
R22
D1
Q71 F-15 Q952 H-14 J C10 E D955
JW187
JW186
E C954
CN952
C18 E
JR1
C984
1 3 1 2 D984 JW181
R193
1 3 E
C141
C100
C172 E FB950
Q984
Q11 C171
Q73 G-14 Q981 J-11 EP903 E E E Q191 Q141 R984
D982
IC231 R143 C191 D954 (AZ5D)
R23
C143
Q12 Q982 Q981 8 3
R981
C982
R985
R983
CN1 D981 1-865-425- 11
R194 R144 JW194
Q81 E-15 Q982 J-10 PC C300
C20 C19
Q1 Q51 R56 C193
Q82 F-14 Q983 J-9 IC231 M M

(CHASSIS) L L R R M901 M902 (Page 46)
Q83 F-14 Q984 J-11 DVD
DIGITAL (FAN) (FAN)
P S-MASTER
N S-MASTER
BOARD (Page 46)
SWITCHING
REGULATOR (1/2) M S-MASTER
(Page 46)
K OUT (AZ5D)
BOARD
CN502
(AZ5D)
CN501
BOARD
CN503
(FRONT VIEW) VIDEO/SAT (CHASSIS) VIDEO/SAT
OUT IN
J101
HCD-AZ2D/AZ5D
40 40
HCD-AZ2D/AZ5D
7-15. SCHEMATIC DIAGRAM – MAIN BOARD (1/4) – • See page 60 for IC Block Diagrams.
ANTENNA
AM
FM 75Ω
COAXIAL
TUNER UNIT
SUPPLIED WITH
THE ASSEMBLED BLOCK
(Page 38)
(AZ5D) (AZ2D)
(1/4) CN206 CN201 CN202
SW
TUNED
SR
D-GND
D-GND
A-GND
A-GND
A-GND
A-GND
A-GND
A-GND
A-GND
FR
SL
A+9V
A+5V
9P 19P 17P
FC
A GND
FL
R OUT
ST DOUT
Rt
L OUT
SPDIF
Lt
R-IN
ST CLK
ST CE
L-IN
ST DIN
(AZ2D)
D261 1SS355
D262 1SS355
DIGITAL OPTICAL 1
TRANSCEIVER
SW
SR
RT
FR
SL
LT
FL
C
IC231 D.OUT 3
FB201 0
L231
DVD
3.3V 2 100µH
DIGITAL
C231 2
OUT 100 10V
D.GND 1
(Page 44)
45
IC231 3
C241
TOTX141L D1 1000
Q11 4
1SS355 10V
RT1P141C
(AZ5D)
L241 100µH
SW
SR
RT
SL
FR
LT
FL
C
C11 X11 C12 Q270-277
33p 12MHz 27p
MUTING
Q12
C200 RT1N441C ∗R245,295 C277 C276 C275 C274 C273 C272 C271 C270
R295 ∗
10 10 10 10 10 10 10 10
0.1 R7 R8 10K(AZ2D:E2/AZ5D:E2)
1k 1M 50V 50V 50V 50V 50V 50V 50V 50V
0(EXCEPT AZ2D:E2/AZ5D:E2)
AZ2D:E2/ R291 R288 R285 R282 R279 R276 R273 R270
R19 R18 2.2k 2.2k 2.2k 2.2k 2.2k 2.2k 2.2k 2.2k
AZ5D:E2
R245 ∗
100k 1.5k
R292 R289 R286 R283 R280 R277 R274 R271
100k 100k 100k 100k 100k 100k 100k 100k
R296
USB D/A CONVERTER 100k
IC1
Q11,12 Q277 Q276 Q275 Q274 Q273 Q272 Q271 Q270
PCM2704-DBR
USB CONTROL SWITCH R246 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938
100k
XTO XTI
37
38
39
40
41
CK SSPND
R9 1.5k
DT TEST2
PSEL TEST1 R293 R290 R287 R284 R281 R278 R275 R272
CN1 1k 1k 1k 1k 1k 1k 1k 1k
C14 R59 10k
PC DOUT HID2
C18 R20 C13 47
1 1M 1 16V R58 10k
SW-IN
C-OUT
SR-IN
SL-IN
GND DGND HID1
RT-IN
FR-IN
FL-IN
L1
100µH R57 10k
LT-IN
D+ VDD HID0
C17
R10 22 0.1
D- D- HOST
R11 22
VBUS D+ VCCP (AZ5D)
C252 C202 SR-IN C254 10 50V
10 10
JR1
0.1 VBUS PGND 50V 50V Q201,251 TONER C253 0.022 R255 47k
C15 R253 R203
MUTING
47 16V 1k 1k SW-IN C235 10 50V R254 47k
ZGND VCOM R16 R17 Q262 Q263
47 47
RT1P141C RT1P141C VRSW R235 47k
MUTING MUTING
AGNDL AGNDR R234 47k
C3 1 CONTROL CONTROL
C53 1
C54 SWITCH SWITCH
VCCL VCCR 10
50V
VOUTL VOUTR R262 R265
C10 4.7k 4.7k
(CHASSIS) 0.1 R1 R51
EP903 22 22 R53
220
C1 C51 C265 C267
10
C300 0.047 0.047 Q251 Q201 4.7 R267 R266
50V
0.1 C16 2SC5938 2SC5938 50V R264 R263 22k 100k
C2 1 C52 Q1,51 22k 100k
C264 C266
0.047 0.047 R3 MUTING 4.7 10
220
50V 50V AUDIO SELECT
R251 R201
C100 2.2k R252 R202 2.2k SWTICH
100k 100k
(CHASSIS) 0.1
R54 R4 C251 C201 IC261
C4 BU4053BCF
2.2k 2.2k 10 10
10 50V
R141 C141 R142 50V 50V
1k 220p 100k
(AZ5D)
L Q51 Q1
2SC5938 2SC5938
48
77
VIDEO/SAT
IN Q13
Q171 RT1P141C Q260,261
R RT1P141C MUTING INVERTER
J101
R191 C191 R192 R145 MUTING
4P CONTROL
1k 220p 100k 1k CONTROL R260 R261
SWITCH 10k 10k
L
SWITCH
VIDEO/SAT R143
OUT 0 R146 R171 R21 R56 R6
1k 4.7k 4.7k 1k 1k
R
C143 R144
220p 100k Q141 C172 C20
2SC5938 4.7 4.7
50V 50V
MUTING R173 R172 R23 R22
22k 100k 22k 100k
C262 0.1
Q191 C171 C19
2SC5938 4.7 4.7
Q260 Q261
MUTING R196 50V 50V RT1N141C RT1P141C
1k
C193 R194
220p 100k
46 R204 47k
R193 R195
R205 47k
0 1k
C203
C194 10 50V
C144 10 50V
C192 10 50V
C142 10 50V
0.022
SW-OUT
SR-OUT
SL-OUT
TONEL
SL-IN
42
76
5
C204
10 6
50V
7
10
12
17
(Page 44)
18
45
26
25
24
23
27
30
28
29
31
32
33
39
40
61
70
69
34
42
43
(Page 43)
(Page 42)
(Page 42)
HCD-AZ2D/AZ5D
41 41
HCD-AZ2D/AZ5D
7-16. SCHEMATIC DIAGRAM – MAIN BOARD (2/4) – • See page 59 for Waveforms.
(Page 41)
(Page 41)
34
42
43
31
26
27
24
28
29
23
30
32
25
33
40
39
(2/4)
20
C106
10 50V 21
C109
R104 10 8
2.2k
50V
R103
(Page 44)
2.2k
R101 15k
FR-IN
LT-IN
FL-IN
R105
RT-IN
(AZ2D)
10k
C130 0.047
R120 10k
C103 10 50V
C111
C102 10 50V
C139 10 50V
C128 10 50V
C154 10 50V
C104 10 50V
0.0022
TONEL
C107 0.022
C108 0.022
C129 0.47
C112
C105 0.1
10
C110 50V
0.068
Q103 C101
2SC5938 10
HP301 DECK A/B SELECT SWITCH,REC/PB,EQ AMP,
R109 C146 50V R128
(PB) MUTING
(DECK-A) R110 47k 0.0068 INPUT SELECT SWITCH,TONE CONTROL 1M
1k C115
C302 ELECTRICAL VOLUME,BASS BOOST AMP
CN301 10
3P FB30 C301 10 50V IC101
0 330p 50V M61537FP
L-CH L-PB
C140
R130 Q101 R108
GND FB50 0 100 2SC3052 47k 1
50V
R-PB FEED BACK
C116
SWITCH
R-CH 10
FB80 C351 C352 FB101 50V
0 330p 10 C304 0 C113
50V C303 10 R111 0.47 R106
CN302 330p 50V 1k 5.6k
8P FB34
0
L-PB C117
R112 C114 R107
1
L-CH GND FB54 0 C119 15k 50V 0.39 470 FL-OUT
47 R114
L-REC 16V 180 C118 0.01 C174 100p
Q301,302,351,352 R147 R127
2.2k C147 100p R113 330k 2.2k
R-PB MUTING 71
R-CH GND C148 100p C173 100p R126 2.2k 72

FB84 C353 C354 Q351 Q311-313
0 330p 10 50V 2SC3624A
R-REC C125 100 10V
Q311 MUTING CONTROL R148
2SA1235 2.2k
GND SWITCH C126 100 10V
R301 R351
4.7k 4.7k (AZ5D)
ERASE E-HOT R175 4.7k
Q301 C178
2SC3624A C179 0.22
R198 2.2k 1 50V
R311 R313
HRPE301 10k 10k C198 100p
C177 R174 C176
(REC/PB/ERASE)
(DECK-B) C197 100p R163 330k 0.47 4.7k 10 50V VRSW
R302 R312 R197
4.7k 10k 2.2k C127
Q302 100 C169 R164 R162 15k FR-OUT
2SC3624A C340 Q153 C166 10V 47 180
R352 0.1 2SC5938 10 16V C168 C167 C164
0.01 1 0.39 R157
4.7k 50V
MUTING 50V 470
R156
Q352 C150 0.1
2SC3624A Q312 Q313 R160 R161 C163 5.6k
RT1N141C RT1N141C 1k 1k 0.47
R180 R158
100 47k
R353 Q151
1k 2SC3052
R159
FEED BACK
47k C124
SWITCH 100
Q353
C165 10V
2SC3624A Q315 10
RT1N141C
MUTING 50V
R310 C123
4.7k 0.1
C151 10 50V
Q314,315
MUTING CONTROL C152 10 50V
SWITCH
R121 2.2M
R303
1k
22p
C189 C155
C157 0.022
C132 0.01
10 R131 0.1
C131
Q303 50V 2.2k
Q314
2SC3624A
RT1P141C C310
MUTING
22 50V
L301 R306 R307 R309 C162
C133 0.01
C121 1
C306 C307 10
27mH 2.2k 10k 12k
100p 330p 50V
R151
15k
TONER
C308 R118
1k
0.01
R132 C158 C160
27k 0.022 0.068
R356 C358 R359 R168 R122
2.2k 0.01 12k 1k C122 15k
4.7
C356 L351 50V R155 CN100
R357 10k
100p 27mH C357 2P
R304 R354 330p 10k C161
33k 33k C196 R154
0.0022
0.0068 2.2k
Q316,317
REC BIAS SWITCH Q104
2SC5938 R133 Q140 R129 R153 C159
C305 C355 10k 2SC5938 15k 2.2k 10 50V
Q317
0.001 0.001 R119
RT1P137L
1k
C134 C156
(Page 47)
R320 L311
33 10 10
100µH 50V 50V
R305 R355 R169
4.7k 4.7k 1k
R102
R314 47k
R319 3.3k
47k
R152
R318
47k
47
C315 R315
0.0047 4.7k
T301 R317 Q318 Q104,154 Q154 R123 C135
2SC2001 2SC5938 1
10k MUTING 1M
BIAS OSC 50V
BIAS
C314 OSC
0.01 Q140,363
100V Q343
C313 R343 Q341-343
C312 R316 AMS DETECT R345 RT1N141C
47 0.01 10 22k AMS DETECT 10k
16V
C311 Q316 Q321,322 Q361 R188 D181

Q362 56
0.0068 RT1N141C TRIGGER PLUNGER RT1P141C RT1P141C 750 1SS355
MUTING CONTROL 47
DRIVE(DECK-B) MUTING
SWITCH Q363 R342 D182
CONTROL RT1P141C
4.7k 1SS355
79
R329 R332 SWITCH Q341 Q342 C183

R326 R323
47k 47k 2SC3052 RT1N141C 2.2
1k 1k C361 R361 C363 R189 R186 R187
Q327 Q324 Q322 4.7 4.7 R364 R367 C390 47k 0 470k 50V
2SB1116 2SB1116 2SB1116 4.7k 4.7k 4.7k R344
C324 50V 50V 22
0.0047 Q329 50V 10k
Q328,329 C322 D183
2SB1116 R362 R347
0.0047 R365 1SS355
R328 R327 CAPSTAN/REEL R363 100k R366 R369 R368 R341 2.2k
100k
R325 R331 R330 22k C364 22k
2.2k 2.2k R324 MOTOR DRIVE 22k 100k 10k
2.2k 2.2k 2.2k 2.2k R322 R321 4.7
(DECK-B) 50V
2.2k 2.2k D321
48
1SS355
C362
54
Q321 4.7 50V
Q323
RT1N141C
RT1N141C
53 (Page 43)
Q328
RT1N141C
Q326
A35
A36
RT1N141C
D322
78
67
68
69
70
44
75
1SS355
52
A97
A21
A22
90
80
91
R379 R380
Q326,327 4.7k 4.7k
R371 10k
CAPSTAN/REEL
MOTOR DRIVE R372 10k R381 10k
R374
(DECK-A) R373 10k 10k R377 47k
R378 4.7k
R376 22k
Q323,324
TRIGGER PLUNGER R375 10k 79
DRIVE(DECK-A) 78
A TRGM+
B TRGM+
A CAPM+
B CAPM+
A SHUT
B SHUT
A PLAY
B PLAY
M-GND
M-GND
A HALF
B HALF
R-REC
F-REC
(Page 44)
CN304
NC
CN303 8P
7P
TAPE MECHANISM TAPE MECHANISM

DECK BLOCK DECK BLOCK
(DECK-A) (DECK-B)
SUPPLIED WITH SUPPLIED WITH

THE ASSEMBLED THE ASSEMBLED
BLOCK BLOCK
HCD-AZ2D/AZ5D
42 42
HCD-AZ2D/AZ5D
7-17. SCHEMATIC DIAGRAM – MAIN BOARD (3/4) – • See page 59 for Waveforms. • See page 72 for IC Pin Function Description.
C464 C462
(3/4) 0.1 100 10V
65
76
72
71
66
63
61
A65
77
R465 1k
60
59
58
57
56
55
54
53
52
51
80
79
78
75
70
69
68
67
Q465
RT1N141C
INVERTER
R475
R480 10k
R463 100
100
(AZ5D)
R471 10k
R464
100
R443
100
R460 100
R459 100
R458 100
R457 100
R455 100
R454 100
R462 10k
R444
CN113 100
13P
LED+9V
LED-GND
LED-GND
VP R451
1M
D+3.3V
TC B
PLAY SW
TC B TRG
TC B CAMP
P_A_MUTE
P_LINK_SW
TC AMS IN
P_POWER_KEY
P_DISP_KEY
P_AMPIC_CLK
P_AMPIC_DATA
TC LINE MUTE
TC REC MUTE
TC PB/REC
TC BIAS
P_LINE_MUTING
P_MIC_IN
VSS
P_HEADPHONE_IN
VCC
HP_MUTING
P_SM_CS3
P_SM_CS2
P_SM_CS1
P_SM_OVF
P_SM_DRV_RST
P_SM_SD
P_SM_OTW
P_SM_NSP_
MUTING
P_SM_INT
P_ADC_
RESET
D-GND
DA 5 R481 R452
100 1M
CP 7 81 FAN 50
KEY
IN_3 DRIVE
CS 6 82 R482 100 49
KEY STBY
RESET R483 100 IN_1 RELAY 48
(Page 56) 3 83
DRIVE3
P_O_DVD_
BACK-LIGHT POWER
24 84 R484 100 TCC720
DRIVE1
POWER
SIRCS 4 85 R485 100 R446 100 46
DRIVE2 P_RECOUT_MUTING
EVER+3.3V 86 R486 100 45
DRIVE4 PCM2704 POWER
87 R487 100 44
KEY IN_2 P_TC_AMS_MUTE
R447 1M R403 1M
CN112 NO USE NO USE
5P
SYSTEM CONTROLLER 42
P_VACS IC401 P_LINK_LFE_SW
D-GND 90 R490 100 R441 100 41
M30622MEP
TAPE B SHUT ST-CE
D-GND R491 100 -A06FPU0 R440 100 40
91
TAPE B HALF/REC ST-DIN
KEY-1 95 R439 100 39
R494 R495
SPEC-IN ST-CLK
10k 10k
KEY-2 94 R438 100 38
MODEL-IN ST-DOUT
CN401
STANDBY-LED 100 94 R437 100 37 4P
KEY_2 ST TUNED
R496 10 R436 100 A36 IIC-DATA
(Page 58) 95
KEY_1 TC A TRG
CN111
P_DVD_I_MTK_SLOT_IN
R498 10 R435 100 A35 IIC-CLK
11P AVSS TC A CAPM
D-GND A97 R434 100 34 D+3.3V (FOR CHECK)
TAPE A SHUT P_ID_IO_SYSRST
D-GND R433 100 33 D-GND
R497
P_VIDEO_MUTE
P_I_DVD_XIFCS
VREF PI_DVD_SCK
ML9208 RESET
100
TC A PLAY SW
D-GND
ML9208 DATA
R432 100 32
R400
ML9208 CLK
AVCC P_I_DVD_SI
P_I_KRMOD
BACK LIGHT
USB_A_DET
100
ML9208 CS
P_SM_CLK
P_O_DVD_
KEYOUT3 100 R431 100 31
P_I_MREQ
TC A HALF
81
STANBY P_O_DVD_SO
XC-OUT
AC-CUT
CN VSS
KEYOUT2 LED
P_SM_
87
RESET
X-OUT
SIRCS
XC-IN
BUSY
DATA
DATA
BYTE
TS1
X-IN
VSS
VCC
NMI
CLK
KEYOUT1
IIC-
IIC-
82 R408
TOUCH R492 R493
10k
DRIVE4 86 ∗ 4.7k
SENSOR
DRIVE3 83 C498
10 R472 R473 ∗R473
DRIVE2 85 50V ∗ ∗
0(AZ2D)
DRIVE1 84 150(AZ5D)
C400 C499
R404 100
R405 100
R406 100
R407 100
D+3.3V
0.1 0.1
C399
C416 0.1
330
R424 100
6.3V
24
3
R429 100
R430 100
R413 0
X401 32.768KHz
R411 330k
∗R492
R401 100
R402 100
R425
R417 10k
150(AZ2D:E13) 100
1K(AZ2D:E2/AZ5D:E2) EP902
R419 100
R421 100
R426 100
R427 100
R428 100
R469 10k
R420 47k
R445 C999
R409 10k
1.5K(AZ2D:KR) 47k 0.1

4.7K(EXCEPT AZ2D:E2,E13,KR/AZ5D:E2)
1
(CHASSIS)
48
C410 C411 X402 C417
19
23
25
26
27
28
∗R472 C412 62
18p 18p 5MHz 3300
0.1
0(AZ2D:SP,MY,PH/AZ5D:SP,MY,TH) 6.3V 59
330(AZ2D:E3,E15/AZ5D:E3,E15)
56 R422 R415 R416 63
680(AZ2D:E12/AZ5D:E12) 10k 10k
100
1K(AZ2D:EA/AZ5D:EA) 58
1.5K(AZ2D:AUS/AZ5D:AUS)
4.7K(AZ2D:E2,E13,KR/AZ5D:E2)
A21
A22
52
47 64
D398 Q22,30
1SS355
MUTING CONTROL SWITCH
D396 D397 D400

D395 1SS355 1SS355 1SS355
1SS355
65
66
R394
IC391 4.7k (Page 44)
66
61
BD4828G
(Page 42) R391
D392 D393 D71
1SS355 1SS355 Q30 1SS355 Q22
10k
RT1P141C RT1P141C
RESET SIGNAL
C30 C74
GENERATOR
R393 C391 R395 D394 R29 10 R74 4.7
Q391 22k 0.1 220 1SS355 R27 22k 50V R72 22k 50V
2SC3052
4.7k 4.7k
68
RESET SWITCH C393 C29
D391 R392 C392 10 R396 D399 R28 R73
10 C73
1SS355 22k 0.1 50V 10k 1SS355 100k 50V 100k 4.7
50V
D72
53
1SS355
72
54 67
73
(Page 41)
69
70
61
HCD-AZ2D/AZ5D
43 43
HCD-AZ2D/AZ5D
7-18. SCHEMATIC DIAGRAM – MAIN BOARD (4/4) –
(Page 43)
(Page 42)
58
59
66
63
62
79
78
67
64
68
72
73
65
(4/4)
CN203
13P
OCSW1 19
SYSRST 34
3.3V_MNT C260 2200p
(AZ5D:EA,AUS)
XIFCS 26
IFBSY 28
SIO 31
SOO 32
MREQ 25
(Page 35) SCO 33
GND
VIN
D-GND
VO
VC
+9V REGULATOR +9V REGULATOR
MIC IC954 IC951
PQ09RD21 TA7809LS
VOICE(N.C)
KRMOD 27 O I
G
C952 C951
(Page 54) NO955
100
10V
1
50V
3P
V+5V
D953 D954
C958 C957 10EDB40 10EDB40
V-GND
1000 1 C950
10V 50V 4700
VMUTE 23 JW951 16V
(AZ2D)
SW+5V
D955 10EDB40
D-GND
+9V REGULATOR
SW+3.3V (AZ5D)
IC952
D955
M+9V TA7809LS
GND
VIN
VO
VC
CN951
M-GND
+3.3V REGULATOR O I 8P
G
IC955 UNREG+12V
NO953 PQ3RD13
5P C954 C953
(Page 36) 470 1
UNREG+12V
10V 50V FB950
SW-GND
D956
UNREG+7.5V
UNREG+7.5V SWITCHING
C959
REGULATOR
1 SW-GND
C990 50V C980 (1/2)
Q464 1000 4700
S 2SK1828 6.3V 16V EVER+4V
+4V REGULATOR JW903
SWITCH FB980
IC953
TA7804LS 49 ON/OFF
IC956
(Page 41) PQ05RD11
O G I
A65
1
GND
C956 C955
VIN
VO
VC
100 1
2
+5V REGULATOR 10V 50V
3
4 (CHASSIS)
Q951,952 EP901
REGULATOR CONTROL
SWITCH
CN952
3P
R951
D-GND
10k C991
C992 1
1000 50V
Q951 6.3V A-GND
RT1N141C
Q952
RT1N141C A+9V
48
5
(Page 47)
6
(Page 41)
10
12
D951
1SS355
45
17
18
20
CN101
21 21P(AZ5D)
C79 Q31-36 19P(AZ2D)
8
10 C31 MUTING
FR-OUT
50V 10 R31
R75 50V 2.2k
A-GND
(Page 42) 10k FR-OUT
FL-OUT
C70
22p R32 Q31 R33
FL-OUT
A-GND
R61 100k 2SC5938 1k
CN103 47 R76 C72 D-GND
8P 68k R78 R84 10
HP-L 1k 2.2k 50V C32 D-GND
10 R34
50V 2.2k
HP-GND C77 C75 FL-OUT 51 P-DOWN(AD POWER)
R71
470 10
HP-R 47 10V 50V 52 INIT
R35 Q32 R36
HP-SW 63 53 NSPMUTE
R82 100k 2SC5938 1k
R50 100k
MIC SW 65 54 /OTW
47k
IC3
MIC+9V Q71 55 SD
NJM3414AV R83
2SC5938
(Page 52) MIC GND
MUTING
R77
100k
1k
Q73 56 /RST(ENABLE)
2SC5938 C33
MIC SIG 57 OVF
R80 10 R37
MUTING
1k 50V 2.2k
HEADPHONE AMP SL-OUT 58 SCLATCH(CS1) (Page 47)
FR-OUT
2 SCSHIFT
Q83
C85
R60 2SC5938 R92 C82 Q33 R39
47k R88 10 R93 100k 10 R38 2SC5938 1k 1 SCDT
50V MUTING
1k 1k 50V 100k
D-GND
R86
R87 C87 68k C34
DBFB FEEDBACK
R90 100k R81 470 Q82 R94 10 R40
1k 47 10V 2SD1616 2.2k 50V 2.2k
SR-OUT FAN CTRL
RIPPLE FILTER
59 SCLATCH(CS2)
Q81 C90
2SC5938 22p R41 Q34 R42
60 SCLATCH(CS3)
R91 R98 100k 2SC5938 1k
MUTING
(AZ5D) 47 R85 1k (AZ5D)
10k
CN955
2P C89 C94 C93
10 10
1000
50V 50V
FAN+ 10V
M902 C35
(FAN) FAN- 10 R43
50V 2.2k
C-OUT
Q983 (AZ5D)
2SD2525 Q981,982
C981 R44 Q35 R45 CN102
FAN MOTOR SWITCH FAN MOTOR CONTROL
0.01 100k 2SC5938 1k 7P
FAN+
SL-OUT
M901
FAN- R983 R985
Q984 C36
(Page 47)
10k 10k A-GND
(FAN) RT1N141C 10 R46
FAN+
FAN MOTOR DRIVE 50V 2.2k SR-OUT
SW-OUT
D982 R984
CN954
3P UDZS-6.2B 220k A-GND
50
R981 D981 R47 Q36 R48
4.7k 1SS355 100k 2SC5938 1k C-OUT
A-GND
Q982
2SC3052 C982
D983 C983 D984 SW-OUT
C984 UDZS-6.8B 22 Q981 R982 4.7 1SS355
0.01 2SC3052 47k 50V
50V
HCD-AZ2D/AZ5D
44 44
HCD-AZ2D/AZ5D
7-19. PRINTED WIRING BOARD – S-MASTER BOARD (COMPONENT SIDE) – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
• Semiconductor
Location
Ref. No. Location
A
D501 J-14
D502 J-14 S-MASTER BOARD (COMPONENT SIDE)
D505 J-6
D506 J-6
D507 J-5
R717
C714
R594
R714
D508 J-6 R592 R652 Q632 Q661
R683
C774
R712 R788
E
Q751
D517 H-10 E R772
B E R773 E
D518 I-14
R597
R774
R718
R654
C654
R598
R684
R593 R653 C684 R682
Q572
R713 E R789 R742
Q721
D519 I-14
C594
Q691 R743 E
D753 H-12
R744
C744
D754 H-12 (AZ5D)
IC501 J-4
IC502 J-8 C
IC503 J-11
IC504 I-5
C629
IC505 I-8
IC506 I-11
IC507 G-3
IC508 G-4
IC509 G-5
IC512 G-11
D
IC513 G-12
IC514 J-10
IC516 E-14
IC517 F-14
IC518 J-13
IC519 G-8
E 1
Q572 B-2 IC516
Q632 B-6
3
Q661 B-7 R583 R614 R613 R644 R733 R764 L520
R763
R643
Q691 B-10
R734
L601
L722
L751
L752
L721
L571
L632
L572
L602
L631
Q721 B-13 R584 1
C639
Q751 B-13
C579
C611
C761
IC517
C609
C759
C581
C641
C729
C731
F (AZ5D)
3
C668 C698
C695
C665
R666 R696 C730 C728
C580 C578 C610 C608 C640 C638 C760 C758
R510
R750
C662
C692
R748
G R747
IC519 R749
IC507 IC508 IC509 IC512 IC513
C661
R691
R661
C691
R695
C602 R607 C631 C632 R637 R646
D517
C572 R577 C751 C752
C722 C725
R760
H C575 C605
R751
R647 R727 R731 R757
R574
R581 R611 R724
C753
C633
C603
C573
C723
R604 R631 R634 R754
FL505
R632
R640
R722
R580
R610
D753
R662
R664
R730 R752
R694
R692
R602
R572
12 1 12 1 12 1 D754
L517
FL506
13 48 R532 13 48 R546 13 48
FB702
X502
IC504
R535
R617
R685
I IC505 IC506 L518
D518
24 37 24 37 24 37
C794
D519
R561
R540
25 36
R563
25 36 25 36 L516 C527
R524
R525
R517
C795
R630
R536
R537
R538
R523
R533
R677
R547
R550
R551
R552
R520
R521
R522
R555
R518
R545
R531
R600
R527 X501 4 3 C659
R539
R569
R560
D502
IC518
R554
5 1
R553
R542
R541
R564
R543
R514
R557
R558
R556
R588
R528
R529
R791 D501
C655
D508
D506
D505
D507
C532
J
C510
C520
C656
R516
11 10 11 10 IC503 11 10
C533
C530
C518
C508
C529
C619
C628
R599
IC501 R589
IC502
FL503
R511
20 1 R505 20 1 R627 20 1
IC514 R570
FL504
(AZ5D) R515
1-865-421-
R512
K L505
11
L506
(11)
HCD-AZ2D/AZ5D
45 45
HCD-AZ2D/AZ5D
7-20. PRINTED WIRING BOARD – S-MASTER BOARD (CONDUCTOR SIDE) – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A
S SP OUT BOARD
CN1100 R SP OUT BOARD
CN1101
(Page 53) T SP OUT BOARD
CN1102 (Page 53)
S-MASTER BOARD (CONDUCTOR SIDE) (Page 53)
EP504 • Semiconductor
Location
R793
R794
C709
C738
C769
R771 R740 R711 R680 R651 C589
C600 NO506 NO505
E E
Q752
C593
Ref. No. Location
C678
C741
C649
1 NO507 5 C712 1 4 C681 E 1 6
(CHASSIS) Q631 C652 E (CHASSIS)
R650
Q662
R591
C592
E
D503 J-2
Q571
E C772 C740
C713
C679
Q722
C768 C739 C680 C653 C588
C648
C590
D504 J-3
C591
R792 C773 R710 C708
R770 R681 R590
C743
Q692 D509 K-6
C770
R741 C711 C710 C683 C651
(AZ5D) C771 EP503
C682 D510 K-6
D771
C742
R658
1 R795
C650 C614 D511 J-12
D512 J-12
C C764 C734 C704 C674 C644 C584
D513 J-8
C615 C585
C765 C735 C645
D514 K-8
SWITCHING C658
REGULATOR D515 J-4
(2/2) R657 R587 D516 K-4
R769 R768 R739 R738 R707 R706 R679 R678 R649 R648 R619 R618 R586
D571 F-14
CN503
D572 F-13
C767
C766
C737
C736
C707
C706
C677
C676
C647
C646
C617
C616
C586
C587
E
Q657
D C620 D601 F-13

D602 F-12
D631 F-11
D632 F-10
M D661 G-9
C791 D662 G-8
MAIN
L754
L724
L634
L604
C790
L633
L664
L574
10 D691 G-7
L753
L723
L694
L693
L663
L603
L573
BOARD
E CN952
(Page 40)
D692 G-7
D721 F-6
D722 F-5
D751 F-5
R796
R790
R785
R775
C626
C625
C621
C622
C623
C624
R762
C696 C697 C667 C666 D752 F-4

R732
R645
R612
R615
R582
R765
D771 C-3
R735
C792
R642
R585
C657
C672
C627
C671
F IC515 I-4
D632
D631
D602
D601
D572
D571
D751
D722
D721
C793
C693 C670
C663
Q571 B-14
C757
C732
C637
C727
C642
C762
C607
C577
C612
C582
D691
D661
D752
R667
Q631 B-10
R697
C700
R698 R668
Q657 D-3
C699 C669
Q662 B-10
C664
C694
EP505 EP506
EP507 Q692 B-7
C733
C726
C583
C763
C756
C636
C643
C606
C613
C576
G D692
Q722 B-3
R728 D662 R638 R633 R608 R603 R578 R573 Q752 B-3
R753
R758 R626 R596 (CHASSIS)
(CHASSIS) R783 R746 R656
R723 R672
R665
C673
R759
R671
R639
(AZ5D) C701 R663
R579
R729
R609
C604
C574
C724
C754
C634
H C783
C784
C786 C702 R693
C787
L519
C748 C747 C688 C687 C598 C597

C785
(CHASSIS)
IC515
5 4
C548
C561
C536
C562
C549
C781
C537
R562
C780
R616 1 3
C559
C547
C546
C689
C563
C550
C570
C560
R786 C557 C544

CN501
I N C749 C782 C545

C630 R787 C503
C558 C599
MAIN C796
BOARD
CN101
C569
C556
C543
(Page 40)
D504
D503
C522
C521
J C528
C531
C509 C511 EP501
C519
D513 D512
R686
C523 D515
D511 R502
D514
NO501 R504 C505

D510
D509
R509
C535
D516
C660
C525 C515 C512 R501 C507

1
R506
C517
C534
C524
R508
C526 2 CN502
C502
(AZ5D) C514 C513 C596 C504 C501 C595
K C618
11
1-865-421- (11)
(CHASSIS)
F MAIN BOARD
CN100
(Page 40) P MAIN BOARD
CN102
(Page 40)
(AZ5D)
HCD-AZ2D/AZ5D
46 46
HCD-AZ2D/AZ5D
7-21. SCHEMATIC DIAGRAM – S-MASTER BOARD (1/4) – • See page 59 for Waveforms. • See page 64 for IC Block Diagrams.
(Page 48)
10
11
12
13
14
1
6
(1/4) D507 D508 C656
1SS355TE-17 1SS355TE-17 0.1
(AZ5D)
D505 D506 C655
1SS355TE-17 1SS355TE-17 0.1
CN502
7P D511
1SS355TE-17
SW-OUT
C501 D512
A-GND 10 50V 1SS355TE-17
C-OUT C504
C502 10 50V
A-GND
1 50V
SR-OUT
C505
0.1
A-GND
R501 R502
SL-OUT
C513 0 0
(Page 44) 1
C512 50V
D509 1
1SS355TE-17 50V
D510 D513
1SS355TE-17 1SS355TE-17
C595
R505 1k
D514 10 50V
C660 1SS355TE-17
0.1 C507
0.1
R504 R506 C514 C596
0 0 10 C515 10
50V 0.1 50V
C509
100 C508
10V 0.1
C517
0.1 C519
100 C518
10V 0.1
R627 1k
C619
0.1
C527
0.1 IC501
PCM1802DBR
D519
1SS355TE-17
IC502
PCM1802DBR
D518
A/D CONVERTER
1SS355TE-17
CN501
21P(AZ5D)
A/D CONVERTER
19P(AZ2D) (AZ5D)
LAT3
SCLATCH(CS3)
LAT2
SCLATCH(CS2)
FAN CTRL C510
FAN CTRL
0.1
DBFB FEEDBACK C511
10 50V
D-GND
SCDT
SCDT
SCSHIFT C520 C521
SCSHIFT 0.1 10 R599
LAT1 R589 50V 100
SCLATCH(CS1)
100
OVF
OVF
RESET
/RST(ENABLE)
SD
SD
OTW
/OTW
NSP MUTE
NSPMUTE
(Page 44)
INIT
INIT
P-DOWN(AD POWER)
D515
D-GND C659 C523 1 50V 1SS355TE-17
0.1
D-GND
D501 D502 D516
A-GND
1SS355TE-17 1SS355TE-17 C522 1 50V 1SS355TE-17
FL-OUT
A-GND
FR-OUT
D504 D503 C630 C525 10 35V
1SS355TE-17 1SS355TE-17 0.1
R508 R509 C524 0.1

0 0 C528
C618 10 35V 100 C529
C526 0.1 10V 0.1
R570 1k
C534
CLOCK BUFFER C535
4.7 0.1 L506
IC514 50V 10µH
TC7WU04F-TE12L
17 L505
10µH
18 VCC
16 R512
R516 0 FL504 R686
15
(Page 49) SCK 0 0
GND A/D CONVERTER

IC503 FL503
PCM1802DBR
NO501
2P
R514
1M
R515
1k
X501
12.288MHz
(Page 42) C532 C533
+5V REGULATOR 10p 10p
CN503
IC516
10P(AZ5D)
9P(AZ2D) µPC2905T-E1
R511
A+9V 100
I O
G C531
A-GND
10 C530
C790 50V 0.1
D-GND 0.1
50V +3.3V REGULATOR
(Page 44) G+12V
IC517
GND C791 L520 µPC2933T-E2
100 1µH
GND 10V
I O
SWITCHING GND G
C793
REGULATOR
30.4V 100
(2/2) C792 10V R616
0.1 0
30.4V C629
0.1
30.4V
(AZ5D)
HCD-AZ2D/AZ5D
47 47
HCD-AZ2D/AZ5D
7-22. SCHEMATIC DIAGRAM – S-MASTER BOARD (2/4) – • See page 59 for Waveforms. • See page 62 for IC Block Diagrams.
(Page 50)
51
19
20
21
22
23
24
25
26
(2/4)
10
11
12
2
C628
0.1
NSP MUTE NSP MUTE

R518 R550 1k R547 R546
SCDT
1k 1k 0
SCDT R521 1k SCSHIFT R551 1k
SCSHIFT R522 1k LAT1 R552 1k (AZ5D)

EP505
LAT2 R523 1k
C569 C562
100p 0.1
3
C536
C543 R685 (CHASSIS)
100p 0.1 R617 10k C563 10k
0.1
R520 10k R555 10k
OVF
R553 C747
R524 C597 0 0.1
0 0.1
R558 1k
R557 1k
R556 1k
C537
0.1
C748
C598 0.1
C545 0.1
0.1
R525 R554
0 0
R517 R600
R677
100 100
INIT INIT 10k
R588
1k
IC504 IC506
4 CXD9788AR CXD9788AR
R528 1k
5
6
R529 STREAM PROCESSOR
STREAM PROCESSOR
1k
R563 C548
0 0.1
SCK SCK
(Page 47) C547 R569

(CHASSIS)
C599 0.1 0
EP507
C544 100 C503 C570
0.1 10V 0.1 0.1
C780
0.1
C781
C546 C749 0.1
100
0.1
R531 10V
0
R560 R561
0 0
C782
0.1
14
13
R562
NSP MUTE 0 L516
0
R533
1k R532
0
SCDT R536 1k
SCSHIFT R537 1k
C549
0.1
LAT3 R538 1k
FB702 L518 FL506 C784 R786 C786 C787

0 0 0.01 1M 0.001 10p
C556
100p R535 10k
R630 10k
FL505 L517 R791
0 100
C783
R539 22 R787 L519
0 25V VDD 100
I 1µH
NC GND
C550 X502
0.1 49.152MHz
VO
VI
GND
N.B.
C785
CNT
C794 C796 5p
C558 0.1 100
0.1 10V
R540
0
R527 C795 IC515

100 0.01 MC74VHC1GU04
INIT C687 R510
0.1
0
IC518
NJM2870F18
R541 1k
IC505 CLOCK BUFFER
7
R542 1k CXD9788AR
8
R543 1k
+1.8V REGULATOR
9
STREAM PROCESSOR C688
0.1
R564
0
SCK
C561
0.1
C557 C689 EP506

0.1 100 C560
10V 0.1
EP501
R545
0 C559
0.1
(AZ5D)
30
29
28
27
36
35
34
33
32
31
(CHASSIS) (CHASSIS)
(Page 49)
HCD-AZ2D/AZ5D
48 48
HCD-AZ2D/AZ5D
7-23. SCHEMATIC DIAGRAM – S-MASTER BOARD (3/4) – • See page 61, 63 for IC Block Diagrams.
(Page 50)
37
38
39
40
41
42
43
44
45
46
47
48
49
R748 R747
0 0 Q692
L663 R678 2SA1602
10µH 4.7k
C661
C662
1 Q662
1 C680 2SA1602
(3/4) DIGITAL POWER AMP
C676
2200p Q691 Q661
IC519 1 C678 2SA1602 2SA1602
0.22 C681
CXD9845M
R661 R666 2200p C600
3.3 3.3
10
R680
2.7 50V
R646 100 C663 0.033
C714 C684
R647 100 C664 330p
R662 R667 C665 D661 R681 2.2 2.2
0 18 0.1 P6SMB39AT3 2.7
27
R663 100 C669 330p C666 C682
R668 2200p
47 35V C677 C679
18 R714 R684
R664 0 1 0.22 C683 100k 100k
28 R717 R718 NO506
2200p
R665 15k R712 R713 R682 R683 47k 47k 4P
100k 100k 100k 100k
C667 47 35V SURR LCH+
D662 L664 R679
P6SMB39AT3 10µH 4.7k
C674 SURR LCH-
C670 C700 2200
0.033 0.033
C673 0.1 35V SURR RCH+
C668
0.1
R698 D692 L693 R706 C710
R671 0 18 P6SMB39AT3 10µH 4.7k 2200p SURR RCH-
Q661,662,691,692
R672 0 OVER LOAD DETECT (Page 54)
R694
0 C711
C699 C706 C708 2200p
29 330p 1 0.22
R693 100 R710
2.7
C693
30 R697 D691
0.033 18 C698 P6SMB39AT3
R692 0.1 R711
0 2.7
C702
R695 100 C701 C707 C709 C712
C697 1 0.22
3.3 16V 0.1 C692 R696 2200p
1 3.3 47
35V
L694 C713
10µH 2200p
C691 C694
1 330p C695
R691 0.1 R707
3.3 4.7k
C704 (AZ5D)
2200
C696 35V
47
35V
R658
Q657 0
2SC1623
R749 R750
0 0 PROTECT
DETECT
R657 C658
100k 2.2
C733
1
DIGITAL POWER AMP

IC512 Q721,722,751,752
CXD9775M
OVER LOAD DETECT
R722 R735
0 0
32 Q752 Q722
L723 R738
2SA1602 2SA1602
R723 C735 10µH 4.7k
100 0.1
C732 C627
(Page 48) 0.033 L721 0.1
C734
C740
C736 0.0022
2200 1 C738
35V 0.22
C722
0.1 C741
R724 0
C730 C731 R734 D721 0.0022 Q751 Q721
C723 0.1 0.22 0.22 3.3 P6SMB39AT3 2SA1602 2SA1602
R740
2.7
R727 0 R741
C724 2.7
0.01 C774 C744
31 D722 10 10
P6SMB39AT3
C727 C728 C729 R733 C742
0.033 0.22 0.22 3.3 0.0022
C737 C739
R728
0 L722 C657 1 0.22 C743 R774 R744
R772 R773 R742 R743
0.1 0.0022 100k 100k
100k 100k 100k 100k
R729
100 L724 R739 R788 R789
10µH 4.7k NO507
33 47k 47k
5P
R730 R731 C725 R732
22k 47p FRONT LCH+
560 0
C726
FRONT LCH-
1
FRONT RCH+
C763 R746
1 1k
FRONT RCH-
R793 (Page 54)
22k
R792
DIGITAL POWER AMP
22k
IC513
CXD9775M
R795 D771
22k 1SS355TE-17
R794
R752 R751 C751 R765
3.9k
560 22k 47p 0
C765 L753 R768
34
0.1 10µH 4.7k
R753
100
C770
L751 0.0022 EP504
C762
0.033
C752 R764 D751 C771
0.1 3.3 P6SMB39AT3 0.0022
R754 0
D754 D753 C760 C761 C766 C768
1SS355TE-17 1SS355TE-17 0.22 0.22 (CHASSIS)
1 0.22
R770
C671 2.7
0.1
C753
0.1
C754
0.01
R757 R771
0 2.7
D752 C767 C769
1 0.22
P6SMB39AT3
C757 C772
0.033 L752 0.0022
R758
0
R763 C672 L754 C773
3.3 0.1 10µH 0.0022
R759 C758 C759 R762
100 0.22 0.22 0
R769
35 4.7k
R760
0
R783 C620
1k 470 R785 R775 R790 R796
C756 16V 10k 10k 10k 10k
1 C764 17
2200
35V 15
18
36
16
D517 (Page 47)
UDZSTE-172.7B
HCD-AZ2D/AZ5D
49 49
HCD-AZ2D/AZ5D
7-24. SCHEMATIC DIAGRAM – S-MASTER BOARD (4/4) – • See page 61 for IC Block Diagrams.
(4/4)
51
OTW
SD
SD
RESET
FAN CTRL
DIGITAL POWER AMP
C583
IC507
CXD9775M 1
(CHASSIS)
EP503
R572 R585
0 0
R573 C582 C585

100 0.033 0.1
L571 L573
C572 C621 10µH
0.1 0.1
R574 C580 C581 R584 D571

0 0.22 0.22 3.3 P6SMB39AT3 C587 R587
1 4.7k
C573
0.1
R577 0
C574
0.01 R586
C579 C586
C578 R583 D572 1 4.7k
0.22 0.22 3.3 P6SMB39AT3
R579 R578 C622

100 0 0.1 L574
L572 10µH
R580 C577 R582

560 0.033 0
C584
21
2200
R581 C575 35V
22k 47p
C576
1
19
R596
1k
DIGITAL POWER AMP

C613
IC508 1
CXD9775M
C615
R602 R615 0.1
0 0
R603 C612
100 0.033 C623
0.1
L601 L603 R618
C602 10µH 4.7k
0.1
R604 C610 C611 R614 D601

(Page 48) 0 0.22 0.22 3.3 P6SMB39AT3 C616
1
C603
0.1 R607 0
C604
0.01 C608 C609 R613 D602 C617
20 0.22 0.22 1
3.3 P6SMB39AT3
R608 R609
0 100 C624 L604 R619
L602 0.1 10µH 4.7k
R610 C607 R612

560 0.033 0
C614
22
2200
R611 C605 35V
22k 47p C606
1
R591 R590
23 2.7 2.7
C592 C591
R626 2200p 2200p
1k
C643
1 NO505
6P
C589 C593 C588 C590
DIGITAL POWER AMP
0.22 2200p 0.22 2200p SW+
IC509
CXD9775M SW-
R632 R631 C631 R645 C625

560 0 0.1
22k 47p
24
C+
R633 C642 L633
100 0.033 C645 10µH
0.1 (Page 54)
L631 C-
C633 C650 R598 R597
R652 R653
0.1 R648 2200p R654 47k 47k
C632 C646 4.7k 100k 100k R593 R592
1 100k 220k 220k
0.1 C651 R594
R634 C640 C641 R644 D631 2200p 220k
0 0.22 0.22 3.3 P6SMB39AT3 Q631
C648
0.22 C654 2SA1602 Q571
R650 2.2 C594 2SA1602
2.7 10
C634 R637
0.01 0 R651
R649 2.7
4.7k
C638 C639 R643 D632
26 0.22 0.22 3.3 P6SMB39AT3 C652
2200p
C647 C649
1 0.22
R638 R639 C653
0 100 2200p
L632
C644
2200
R640 C637 R642 35V L634
0 0.033 0 10µH
25 Q632
2SA1602
Q572
2SA1602
C636
R656
1 1k C626
0.1
Q571,572,631,632
OVER LOAD DETECT
(AZ5D)
37
38
39
40
41
42
43
44
45
46
47
48
49
(Page 49)
HCD-AZ2D/AZ5D
50 50
HCD-AZ2D/AZ5D
7-25. PRINTED WIRING BOARD – MIC BOARD – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12 13
A MIC BOARD
(CHASSIS) EP1050 (CHASSIS)

EP1060 JW1067
D1061
B
JW1063
C1085 C1079
C1074 C1073 R1070 JW1114
JW1066 JR1053
JW1065
R1082
R1079
R1083
C1082 R1077 JW1113
C1095
C1070
R1073
JW1060 C1071
R1080
R1081 R1068
C1098
C1069 C1072
IC1060 JW1059
R1071
R1069
C1053
C1083 C1084 C1086 JW1056
16 9 C1080
C
R1075
R1065
JW1058
JW1006
JW1062 R1074
J
IC1061
JW1061
CN1050
C1067
C1097 R1072 MAIN
C1064
C1077 BOARD
R1066 C1066
R1084
CN103
R1078
R1076
R1060
R1064
1 8 C1060 (Page 40)
C1078 C1088 C1089 C1068
C1087 R1063 C1062 R1062 C1061
JW1064
D C1091
C1063 JW1057
C1090
R1061
JW1050
R1086
R1085
C1092
R1051
R1067
R1050
R1052
RV1061 RV1060
E ECHO LEVEL MIC LEVEL
JW1116
JR1051
F 11
1-865-451- (11)
J1061 J1060
MIC 2 MIC 1
G
J1050
PHONES
HCD-AZ2D/AZ5D
51 51
HCD-AZ2D/AZ5D
7-26. SCHEMATIC DIAGRAM – MIC BOARD – • See page 64 for IC Block Diagrams.
C1060
0.22 R1060
50V 1k
J1060
MIC 1 R1061 C1061

10k 0.01
C1070
100p
R1075
R1069 150k
10k
MIC AMP
C1062 IC1060(1/2)
0.22 R1062 NJM4565M C1068 C1071 IC1060(2/2)
50V 1k 0.22 R1068 47p NJM4565M C1073
3
J1061 50V 10k 2.2 R1070
1 6 50V 100
C1066 2 7
MIC 2
47p C1069 5
R1066 R1067 2.2
4
47k 100 50V 8 R1074
0
RV1060 R1071
C1064 R1064 R1065 50k 10k
R1063 0.001 100k 1k C1072
10k C1067 MIC LEVEL 10 R1073
220p 35V 100k
C1063
0.01 C1097 C1074 R1072
0.1 C1098 220 10k
0.1 10V JW1006
C1095
0.1
C1077
1
50V R1076 C1078
15k 2.2 50V
RV1061 R1077
50k
C1079 15k R1050
0.022 0
ECHO LEVEL
R1051
C1080
C1084 R1081 C1085 1 J1050
(CHASSIS) C1083 0.068 22k 0.0068
50V
EP1060 C1082 47 PHONES
47 16V
R1078
16V R1080 R1082 R1083
22k 120k 22k 22k R1052
JR1051
JW1050
C1086
0.001
DIGITAL ECHO R1084 C1053
47k 0.001
D1061
UDZSTE-175.1B
JR1053
0.1
NC
VCC
CLOCK
REF
OP2IN
OP2OUT
LPF2IN
LPF2OUT
LPF1OUT
C1087
OP1OUT
0.1
LPF1IN
IC1061
OP1IN
M65850FP-E
GND
CC1
CC2
NC
MIC GND
HP-GND
MIC SIG
(CHASSIS)
MIC SW
MIC+9V
EP1050
HP-SW
HP-R
HP-L
C1091 0.47
C1088 C1089 CN1050

0.001 0.068 8P
R1086
22k
R1085
R1079 22k
C1092 C1090
220
0.0068 0.47
(Page 44)
HCD-AZ2D/AZ5D
52 52
HCD-AZ2D/AZ5D
7-27. PRINTED WIRING BOARDS – OUTPUT SECTION – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12 13
A
VIDEO BOARD SP OUT BOARD
(AZ5D)
B TM1101
JW1105
+
(CHASSIS) C1141
EP1201
D SURR L C1142
JW1106
DMB10 – 4
C BOARD
12
13 C1201
CN301
(Page 33)
R
CN1101
C1202
CN1201
C1217 S-MASTER
PR/CR C1206 BOARD
JW1107 1 NO506
FB1201
(Page 46)
C1203 +
C1143
D R1204 2
1
SURR R C1144 JW1108
C1211 C1208
–
C1207
J1203 C1218
COMPONENT PB/CB
VIDEO OUT FB1202
R1205
E C1212
C1220 + JW1109
FB1203
C1145
R1206
S. WOOFER C1146
C1219
JW1110
Y C1213 – 6
F
IC1201 SPEAKER
C1214
CN1102
T
S-MASTER
+ JW1111
BOARD
C1216 JW1202 C1147
NO505
FB1205
J1202 (Page 46)

G VIDEO OUT C1222 C1221 R1208 R1210
CENTER
C1148
1
JW1112
–
JW1201
C1215 C1210 C1205
C1204
C1209
R1113
TM1100
R1203
C1113
C1114
H R1207
R1101
R1202
L1101
FB1204 +
JW1101 EXCEPT
C1137 AZ2D: KR
1 CN1202 3
C1223
L1201 FRONT L C1138

R1211
G
Y
R1114
J1201
–
C1115
C1116
FB1206 5
C
S VIDEO OUT
G
JW1102
R1209
C1224
R1102
L1102
I
CN1100
EP1202
S
C1225
C1117
C1118
S-MASTER
R1115
L1103 BOARD
+ NO507
R1103
11
JW1103 1 (Page 46)
(11) C1139
1-865-453-
FRONT R C1140
J EXCEPT
K (CHASSIS) – R1116
JW1104
AZ2D: KR
C1120
C1119
R1104
MAIN BOARD
L1104
N0955
(Page 40)
(AZ2D: KR)
K
11
1-865-452- (11)
HCD-AZ2D/AZ5D
53 53
HCD-AZ2D/AZ5D
7-28. SCHEMATIC DIAGRAM – OUTPUT SECTION – • See page 59 for Waveforms. • See page 66 for IC Block Diagrams.
(AZ2D:KR)
EXCEPT L1101
CN1201 VIDEO AMP,75Ω DRIVER AZ2D:KR
RGBSEL R1101 10
13P R1202 R1113 C1114 C1113 TM1100
100 IC1201 10 100000p 100000p 2P
DSEL MM1623BFBE JW1101
CN1100
Cr/R C1201 1 50V CR IN L1102
C1211 R1204 FB1201 5P
GND2
WIDE MUTE2 1000 6.3V 75 0 FRONT LCH+ R1102 10
R1114 C1116 C1115
CR OUT Y FRONT L
Cb/B C1202 1 50V CB IN J1203 FRONT LCH- JW1102 10 100000p 100000p
C1212 R1205 FB1202
GND2 3P
1000 6.3V 75 0
D-GND CLP L1103
CB OUT PB/CB COMPONENT
Y/G C1203 1 50V CY IN FRONT RCH+ R1103 10
GND2 C1213 R1206 FB1203 VIDEO OUT R1115 C1118 C1117
1000 6.3V 75 0 10 100000p 100000p
D-GND I/P JW1103
C1204 CY OUT C1138 C1137 FRONT R
0.1 PR/CR 0.001 0.001
Y BIAS FRONT RCH- L1104
C1205 (Page 49)
22 50V Y OUT
(Page 37) D-GND GND1 R1104 10
C1214 R1207 FB1204 C1220 R1116 C1120 C1119
GND2 1000 6.3V 75 0 0 10 100000p 100000p
C C1206 1 50V Y IN JW1104
CVBS OUT EXCEPT
D-GND YC MIX
C1215 R1208 FB1205 C1217 C1218 C1219 AZ2D:KR
S2 C1140 C1139
V CVBS IN 1000 6.3V 75 0 22p 22p 22p 0.001 0.001
S1
C1207 R1203 10k MUTE1 C1216 J1202
C OUT TM1101
1 0.1 1P
50V C IN SURR LCH+ JW1105 4P
S-DC OUT VIDEO OUT
VCC1 SURR LCH- C1141 0.001
C1208 VCC2 R1210 R1211 FB1206 C1221 SURR L SPEAKER
1 10k 75 0
22p SURR RCH+ JW1106
50V C1209 C1222
0.1 0
C1142 0.001
SURR RCH- JW1107

C1210
100 10V R1209 (Page 49) C1143 0.001
100 CN1101
SURR R
CN1202 4P JW1108
3P
CN1102
VMUTE 6P C1144 0.001
J1201
V-GND S VIDEO OUT SW+ JW1109
V+5V SW- C1145 0.001

S.WOOFER
C1224
L1201 C1223 JW1110
22p 22p
10µH C1146 0.001
(Page 44)
C+ JW1111
C1147 0.001
C1225
CENTER
0 C- JW1112
(Page 50)
C1148 0.001
(AZ5D)
EP1202 EP1201
(CHASSIS) (CHASSIS)
HCD-AZ2D/AZ5D
54 54
HCD-AZ2D/AZ5D
7-29. PRINTED WIRING BOARDS – DISPLAY SECTION – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4 5 6
FL BOARD
40 76
75
R1004
C1004
R1003
R1002
FL1001
B FLUORESCENT INDICATOR
D1005
32 1 C1003
TUBE
JW1030
C1005
C1012
D1004
D1002
D1001
D1003
JW1013 C1013
C1014
JW1012
IC1001 C1011
JW1015
JW1014
9 8
6 1 T1001
DC/DC
7 2
JW1011
CONVERTER
4 3
• Semiconductor
33 64 5
C1009 R1011 JW1016
JW1017 C1002
R1012
Location
JW1025
C1008 R1010 JW1010
R1007
R1024
C1010 JW1018
1C 2C
JW1029
R1023
C1007 R1009
JW1019
C Ref. No. Location
R1006
Q1005
L1001
E
E C1006 R1008
1B E 2B
Q1004
Q1003
JW1020
D1001 B-6
R1001
D1002 B-6
C1001
JW1026 JW1023 JW1021
JW1028 JW1027 JW1024 JW1022 D1003 B-6

D1004 B-6
JW1009
D1005 B-6
JW1008
37
D1006 E-5
JW1007
D1007 E-3
D1008 F-5
JW1004
38 2
D1009 F-3
D CN1001 D1010 G-4
E E
JW1003
IC1001 B-4
R1013
R1014
Q1001 Q1002 IC1040 G-1

R1016
R1015
G Q1001 D-5
D1007 D1006
D1006 – 1010 MAIN BOARD
(BACK LIGHT) CN113
(Page 40)
Q1002 D-6
Q1003 C-5
Q1004 C-4
Q1005 C-6
E
F
D1009 R1017 D1008
R1019
R1020
R1018
R1021
R1022
SIRCS BOARD JW1002
JW1001
IC1040
G 3
JW1034
NO1002
C1040
JW1117 JW1033
1 1
3
R1041 R1040
1-865-450-
D1010
3 1
11 11
NO1103
(11) 1-865-447- (11)
HCD-AZ2D/AZ5D
55 55
HCD-AZ2D/AZ5D
7-30. SCHEMATIC DIAGRAM – DISPLAY SECTION – • See page 59 for Waveforms. • See page 65 for IC Block Diagrams.
21
1
22
24
23
20
36
13
10
15
18
37
16
19
11
17
12
14
FL1001
D1001 D1005
1SS355 UDZSTE-173.9B
C1005
0.01
L1001
47µH
T1001
R1001
2.2k DC/DC CONVERTER C1003 R1004
D1002 R1002
0.01 100
1SS355 10k
1 9
D1003
C1001 2 1SS355 C1004
22 47
50V 8 50V
-1 3 R1003
D1004 100
-2 4 7 1SS355
5 6
41
47
44
42
43
48
40
52
45
49
46
50
39
51
27
34
32
28
25
29
26
33
35
30
31
C1002
Q1005(2/2) 0.022
C1013
CPH5504-TL-E
0.01
OSC
C1014
0.01 Q1004
2SC3052
GRID DRIVE
Q1003
53 2SC3052
GRID DRIVE
R1023
10k R1024 R1006
CN1001 10k 22k
13P 38 R1007
22k
LED+9V
LED-GND
LED-GND
21
27
1
24
22
23
28
25
20
26
36
13
18
15
10
19
16
37
11
17
14
12
VP
D+3.3V
D-GND
DA R1011 1k 54
(Page 43) CP R1010 1k 55

D1006-1010
CS R1009 1k 56
(BACK LIGHT)
RESET R1008 1k 57
D1006 D1007 D1008 D1009 D1010
BACK-LIGHT SELU5223C-S SELU5223C-S SELU5223C-S SELU5223C-S SELU5223C-S IC1001
ML9208
SIRCS
EVER+3.3V
FLUORESCENT
INDICATER
R1015 TUBE
1.5k
DRIVER
R1018 R1022
R1013 R1016 R1017 1.5k R1021 1.5k
1.5k 1.5k 1.5k 1.5k
R1014 R1019 R1020

REMOTE CONTROL RECEIVER 1.5k 1.5k 1.5k
IC1040
NJL22H400 C1006 0.001
32
34
29
33
30
35
31
C1007 100p
41
47
42
44
43
40
45
48
52
46
49
38
53
39
50
51
C1008 100p
R1012
3.3k
C1009 100p
54
55
56
57
Q1001 Q1002
C1011 10 16V
RT1N141C RT1N141C
LED DRIVE LED DRIVE
NO1103
3P
C1012
10 C1010
R1040 47 EVER+3.3V
50V 39p
C1040 1 D-GND
R1041 47 SIRCS
NO1002
3P
HCD-AZ2D/AZ5D
56 56
HCD-AZ2D/AZ5D
7-31. PRINTED WIRING BOARDS – KEY SECTION – • See page 32 for Circuit Boards Location. : Uses unleaded solder.
1 2 3 4
KEY BOARD
A
NO1031
2
EJECT BOARD
NO1041
2 1
R1030
D1030
B (STANDBY)
R1039
S1030
R1031
S1041
Z
11
C 1-865-448- (11)
JW1032
S1035
DISPLAY
R1035
S1031
DIMMER
D
R1032
S1032
PROGRESSIVE
S1030 – 1039, 1041
R1033
E S1033
DSGX
R1034
S1034
SOUND FIELD
S1036
F EQ SELECT
R1036
S1037
DIRECTION
R1037
JW1031
CN1030
G H
S1038
CD SYNC
MAIN
R1038
BOARD
CN112
(Page 40)
S1039
z START
11
1-865-449- (11)
HCD-AZ2D/AZ5D
57 57
HCD-AZ2D/AZ5D
7-32. SCHEMATIC DIAGRAM – KEY SECTION –
D1030
SELS5223C-S
CN1030
(STANDBY)
5P R1030
1k
D-GND
D-GND
KEY-1
KEY-2
STANDBY-LED R1031 R1032 R1033 R1034

(Page 43)
1k 2.2k 2.2k 4.7k
S1030 S1031 S1032 S1033 S1034
DIMMER PROGRESSIVE DSGX SOUND FIELD
NO1031
NO1041
R1035 R1036 R1037 R1038 2P R1039
1k 2.2k 2.2k 4.7k 2P 10k
AD_KEY3 S1041
D_GND
S1035 S1036 S1037 S1038 S1039
DISPLAY EQ SELECT DIRECTION CD SYNC START
HCD-AZ2D/AZ5D
58 58
HCD-AZ2D/AZ5D
• Waveforms
– DMB10 Board – – MAIN Board – – S-MASTER Board – – VIDEO Board – – FL Board –
IC102 6 (DVDRF IP) IC102 <x/c (YUV6) Q318 (Base) IC501 – 503 q; (LRCK) IC1201 qh (CR OUT) Q1005 (Base)
1 (DVD play mode)
7 wa ea ra ta
(DVD play mode) (DVD play mode)
4.6 Vp-p 3.6 Vp-p

0.9 Vp-p 1.5 Vp-p 3.8 Vp-p
1 Vp-p 10.9 µs 20.8 µs
H H 11.4 µs
500 mV/DIV, 200 ns/DIV 500 mV/DIV, 20 µs/DIV 2 V/DIV, 5 µs/DIV 2 V/DIV, 10 µs/DIV 500 mV/DIV, 20 µs/DIV 2 V/DIV, 5 µs/DIV
IC102 <z.v (YUV1) IC102 <xzc (ALRCK) Q318 (Collector) IC501 – 503 qa (BCK) IC1201 qk (CB OUT) Q1005 (Collector)
2 (DVD play mode)
8 ws es rs ts
(DVD play mode)
1.1 Vp-p 4 Vp-p 33.6 Vp-p

15.8 Vp-p 4.1 Vp-p 1.5 Vp-p
H 20.8 µs 10.9 µs 326 ns H 11.4 µs
500 mV/DIV, 20 µs/DIV 2 V/DIV, 10 µs/DIV 5 V/DIV, 5 µs/DIV 2 V/DIV, 100 ns/DIV 500 mV/DIV, 20 µs/DIV 20 V/DIV, 5 µs/DIV
IC102 <z.n (YUV2) IC102 <xzv (ABCK) IC401 qa (XC-OUT) IC514 5, 7 IC1201 w; (CY OUT) IC1001 tl (OSC1)
3 9 wd ed rd (DVD play mode)
td
(DVD play mode)
4 Vp-p 2.1 Vp-p 3.8 Vp-p 2 Vp-p 3.7 Vp-p

1 Vp-p
326 ns 30.5 µs 82 ns H 540 ns
H
500 mV/DIV, 20 µs/DIV 2 V/DIV, 100 ns/DIV 1 V/DIV, 10 µs/DIV 1 V/DIV, 50 ns/DIV 1 V/DIV, 20 µs/DIV 2 V/DIV, 200 ns/DIV
IC102 <z., (YUV3) IC102 <xzb (ACLK) IC401 qd (X-OUT) IC505, 506 qf (XFSOOUT), IC1201 wa (Y OUT)
4 q; wf ef rf (DVD play mode)
(DVD play mode) IC515 4
4 Vp-p 3 Vp-p 1.6 Vp-p 2 Vp-p

1.3 Vp-p
H 40.6 ns 200 ns 20.4 ns H
500 mV/DIV, 20 µs/DIV 2 V/DIV, 20 ns/DIV 1 V/DIV, 100 ns/DIV 1 V/DIV, 10 ns/DIV 1 V/DIV, 20 µs/DIV
IC102 <x// (YUV4) IC102 <xx, (XTALO) IC1201 wd (CVBS OUT)

5 (DVD play mode)
qa rg (DVD play mode)
1.1 Vp-p
1.1 Vp-p 2.5 Vp-p
H H
37 ns
500 mV/DIV, 20 µs/DIV 500 mV/DIV, 10 ns/DIV 1 V/DIV, 20 µs/DIV
IC102 <x/x (YUV5) IC1201 wh (C OUT)

6 rh (DVD play mode)
(DVD play mode)
0.9 Vp-p 1.8 Vp-p

H H
500 mV/DIV, 20 µs/DIV 1 V/DIV, 20 µs/DIV
HCD-AZ2D/AZ5D
59 59
HCD-AZ2D/AZ5D
• IC Block Diagrams IC105, 107 TK11133CSCL-G
VOUT
– DMB10 Board –
GND
VIN
6 5 4
IC301 AK4358VQ-L REG
VOLTAGE
COMP
CONTROL
ROUT4+
ROUT4–
DSDR3
DSDR2
DSDR1
DSDL3
DSDL2
DSDL1
VREFH
AVDD
AVSS
DIF0
1 2 3
CONTROL
GND
NOISE
BYPASS
36 35 34 33 32 31 30 29 28 27 26 25
SCF DAC DATT
LOUT4– 37 DSD
SCF DAC DATT
LOUT4+ 38
24 DSDR4
ROUT3– 39 23 DSDL4
SCF DAC DATT
ROUT3+ 40 22 DCLK
LOUT3– 41 21 CSN/CAD1 – MAIN Board –

SCF DAC DATT
LOUT3+ 42 20 CDTI/SDA
19 CCLK/SCL
ROUT2– 43 IC261 BU4053BCF-E2
SCF DAC DATT CONTROL
ROUT2+ 44 18 I2C
REGISTER
B1 1 16 VDD
LOUT2– 45 17 LRCK
SCF DAC DATT
LOUT2+ 46 16 SDTI3 B0 2 15 B.COM
15 SDTI2 OPEN
ROUT1– 47 PCM 14 SDTI1 C1 3 14 A.COM
SCF DAC DATT
ROUT1+ 48 13 SDTI4
C.COM 4 13 A1
OPEN
SCF DAC DATT
CO 5 12 A0
AUDIO
I/F
INH 6 11 A
VEE 7 10 B
1 2 3 4 5 6 7 8 9 10 11 12 OPEN
LOUT1–
LOUT1+
DZF3
DZF2
DZF1
CAD0
ACKSN
PDN
BICK
MCLK
DVDD
DVSS
VSS 8 9 C
IC1 PCM2704DBR
IC3601 PCM1803DBR
HID2/MD
HID1/MC
HID0/MS
AGNDR
SSPND
VOUTR
TEST0
TEST1
VCOM
PGND
HOST
VCCR
VCCP
XTI
DELTA-SIGMA 20 MODE1
VINL 1
MODULATOR 19 MODE0 28 27 26 25 24 23 22 21 20 19 18 17 16 15
18 FMT1
VINR 2
17 FMT0
× 1/64, × 1/128 POWER SPI
SERIAL 16 OSR
VREF1 3 DECIMATION MANAGER INTERFACE
REFERENCE INTERFACE 15 SCKI
FILTER
VREF2 4 &
WITH 14 VDD
MODE/FORMAT
HIGH-PASS 13 DGND
CONTROL
FILTER
12 DOUT ANALOG PLL D/A
DELTA-SIGMA 11 BCK FIFO CONVERTER
MODULATOR
PLL TRACKER HID CONTROL ISO-OUT
VCC 5 POWER (X8) (SPACT) ENDPOINT ENDPOINT ENDPOINT
AGND 6 SUPPLY
USB PROTOCOL
CONTROLLER S/PDIF
CLOCK & TIMING CONTROL ENCODER
PDWN 7 USB SIE 5V TO 3.3V
BYPAS 8 EEPROM VOLTAGE
INTERFACE XCVR REGULATOR
TEST 9
LRCK 10
1 2 3 4 5 6 7 8 9 10 11 12 13 14
XTO
CK
DT
PSEL
DOUT
DGND
VDD
D–
D+
VBUS
ZGND
AGNDL
VCCL
VOUTL
HCD-AZ2D/AZ5D
60 60
HCD-AZ2D/AZ5D
– S-MASTER Board –
IC507 – 509 CXD9775M

IC512, 513 CXD9775M
36 GVDD B
GVDD 35 GVDD B
34 GND
33 BST B
DVDD LOGIC SUPPLY

GND 1
GATE 32 PVDD B
PWM
PWM BP 2 DRIVE 31 PVDD B
RECEIVER
HS 30 OUT B
GND 3 TIMING
CONTROL 29 OUT B
DGND
CLOCK
RESET 4 (TCB) 28 GND
GATE
DRIVE
DREG RTN 5 LS
DIGITAL
DREG
REGULATOR
GVDD 6 GVDD
M3 7
DREG 8 DREG
DGND 9
M1 10
M2 11 PROTECTION
LOGIC
DVDD 12
OT
SD 13 &
UVP GATE
DGND 14
DRIVE
OTW 15 LS 27 GND
TIMING
CONTROL
DVDD
CLOCK 26 OUT A
GND 16 (TCB)
GATE 25 OUT A
PWM
PWM AP 17 DRIVE 24 PVDD A
RECEIVER
HS 23 PVDD A
GND 18
DGND LOGIC SUPPLY
22 BST A
21 GND
GVDD 20 GVDD A
19 GVDD A
61
HCD-AZ2D/AZ5D
IC504 – 506 CXD9788AR
HPOUTR1
HPOUTR2
HPOUTL1
HPOUTL2
HPVDDR
HPVDDL
HPVSSR
FSOCKO
HPVSSL
XFSOIN
XVDD
FSOI
48 47 46 45 44 43 42 41 40 39 38 37
CLOCK CLOCK
GENERATOR GENERATOR 36 XFSIIN
(SECONDARY) (PRIMARY)
XVSS 1 35 DVDD
VSUBC 2 34 TEST
VSSR 3 33 BFVSS
OUTR2 4 32 BFVDD
VDDR 5
PWM
OUTR1 6 FILTER & SAMPLING 31 DATA
LINER GAIN
∆Σ LOW CUT RATE SgP 30 BCK
VSSR 7 INTERPOLATOR CONTROL FILTER CONVERTER 29 LRCK
VSSL 8
28 MCKSEL
OUTL2 9
27 INIT
VDDL 10
INIT/ SERIAL 26 SFLAG
OUTL1 11
MUTE CONTROLLER
25 OVFFLAGL
VSSL 12
13 14 15 16 17 18 19 20 21 22 23 24
XOVSS
XFSOOUT
XOVDD
DVDD
DVSS
NSPMUTE
SOFTMUTE
PGMUTE
SCDT
SCSHIFT
SCLATCH
OVFFLAGR
IC518 NJM2870F38 (TE2)

VOUT
VIN
5 4
THERMAL
PROTECTION
BANDGAP
REFERENCE
1 2 3
CONTROL
GND
NOISE
BYPASS
62
HCD-AZ2D/AZ5D
IC519 CXD9845M
GVDD_B 1 GVDD_B GVDD_A 36 GVDD_A
35 BST_A
/UVP
OVER CURRENT
FAULT
VREG
/HIZ_HS 34 PVDD_A
GATE
/OTW 2 /HIZ_LS
STUCK DRIVE
/SD 3
DETECT
TIMING PROTECTION
PWM_A 4
CONTROL LOGIC 33 OUT_A
GATE
/OCH
DRIVE
/OCL
/RESET 32 GND
OVER CURRENT
FAULT
OVER CURRENT
FAULT
/RESET 31 GND
/OCL
GATE
/RESET_AB 5 /OCH
DRIVE
CONTROL
TIMING
TIMING PROTECTION 30 OUT_B
PWM_B 6
CONTROL LOGIC
STUCK
PROGRAMMABLE DETECT
OC_ZDJ 7 GATE
CURRENT SENSE /HIZ_LS
DRIVE
/HIZ_HS 29 PVDD_B
GND 8
GND 9 2 TEMPERATURE OVER CURRENT
WARNING/ERROR FAULT
VREG 10 4 /UVP
28 BST_B
/HIZ_HS
GND 11 4
PROTECTION /HIZ_LS
&
M2 12 RESET LOGIC 4
/OCH
M1 13 4
OLP 27 BST_C
/OCL /UVP
OTP
4 OVER CURRENT
CB3C
/RESET FAULT
PWM_C 14
/HIZ_HS 26 PVDD_C
GATE
/HIZ_LS
/RESET_CD 15 STUCK DRIVE
DETECT
TIMING PROTECTION
25 OUT_C
CONTROL LOGIC
GATE
/OCH
VREG /UVP DRIVE
/OCL
GVDD_A UNDER
POWER-UP /RESET 24 GND
GVDD_B VOLTAGE
RESET
GVDD_C PROTECTION OVER CURRENT
GVDD_D FAULT
OVER CURRENT
FAULT
/RESET 23 GND
/OCL
GATE
/OCH
DRIVE
CONTROL
TIMING
TIMING PROTECTION
PWM_D 16 22 OUT_D
CONTROL LOGIC
STUCK
DETECT GATE
/HIZ_LS
DRIVE
/HIZ_HS 21 PVDD_D
VDD 17 REGULATOR VREG
OVER CURRENT
FAULT
/UVP
20 BST_D
GVDD_C 18 GVDD_C GVDD_D 19 GVDD_D
63
HCD-AZ2D/AZ5D
IC501 – 503 PCM1802DBR
SINGLE-END/ 5TH ORDER 20 MODE1

VINL 1 DIFFERENTIAL DELTA-SIGMA
CONVERTER MODULATOR 19 MODE0
VINR 2 18 FMT1
x16 1/64 17 FMT0
(x1/128) SERIAL 16 OSR
VREF1 3 DECIMATION INTERFACE 15 SCKI
REFERENCE FILTER &
VREF2 4 WITH MODE/FORMAT 14 VDD
DC CUT CONTROL 13 DGND
FILTER 12 DOUT
11 BCK
SINGLE-END/ 5TH ORDER
DIFFERENTIAL DELTA-SIGMA
CONVERTER MODULATOR
VCC 5 POWER
AGND 6 SUPPLY
CLOCK & TIMING CONTROL

PDWN 7
BYPAS 8
FSYNC 9
LRCK 10
– MIC Board –
IC1061 M65850FP-E1
LPF2OUT
OP2OUT
LPF2IN
CLOCK
OP2IN
VCC
REF
NC
16 15 14 13 12 11 10 9
OSCILLATOR
D/A LPF2
1/2 VCC
CLOCK DO1
MO
AUTO MAIN 20KBIT
RESET
RESET CONTROL SRAM
MI
D1 DO0
A/D
LPF1
1 2 3 4 5 6 7 8
NC
LPF1IN
LPF1OUT
OP1OUT
OP1IN
CC1
CC2
GND
64
HCD-AZ2D/AZ5D
– FL Board –
IC1001 ML9208-03MBZ03B
64 VDD
63 DA
8 BIT SHIFT
62 CP
REGISTER
61 CS
60 RESET
COMMAND
P1 1 PORT DECODER
P2 2 DRIVER
CONTROL
AD1 3 AD CIRCUIT
AD2 4 DRIVER
ADRAM
16W × 2B TIMING TIMING
GENERATOR2 GENERATOR1
CGRAM DCRAM
248W × 35B 16W × 8B 59 OSC1
OSCILLATOR
SEG1 5 58 OSC0
SEG2 6
CGRAM 57 GND
SEG3 7
8W × 35B 56 VFL
SEG4 8
SEG5 9 55 COM16
SEG6 10 ADDRESS 54 COM15
SEG7 11 SELECTOR 53 COM14
SEG8 12 52 COM13
SEG9 13 READ WRITE 51 COM12
DIGIT
SEG10 14 ADDRESS ADDRESS 50 COM11
CONTROL
SEG11 15 COUNTER COUNTER 49 COM10
SEG12 16 GRID 48 COM9
SEG13 17 DRIVER 47 COM8
SEG14 18 SEGMENT 46 COM7
DRIVER DUTY
SEG15 19 45 COM6
CONTROL
SEG16 20 44 COM5
SEG17 21 43 COM4
SEG18 22 42 COM3
SEG19 23 41 COM2
SEG20 24 40 COM1
SEG21 25
SEG22 26 39 SEG35
SEG23 27 38 SEG34
SEG24 28 37 SEG33
SEG25 29 36 SEG32
SEG26 30 35 SEG31
SEG27 31 34 SEG30
SEG28 32 33 SEG29
65
HCD-AZ2D/AZ5D
– VIDEO Board –
IC1201 MM1623BFBE
S-DC OUT
28 VCC2
S1/S2
27 S-DC OUT
150kΩ 75Ω
VCC1 1 BIAS 6.75MHz DRIVER
LOW-PASS
C IN 2 6dB 26 C OUT
FILTER
MUTE 1 3
25 S1
CLAMP –6dB + 6dB
24 S2
CVBS IN 4 6dB 75Ω
6.75MHz DRIVER
YC MIX 5
LOW-PASS
23 CVBS OUT
FILTER
75Ω 22 GND2
CLAMP 6.75MHz DRIVER
LOW-PASS
Y IN 6 6dB 21 Y OUT
FILTER
GND 7
BIAS 8 BIAS
I/P 9
6.75MHz
LOW-PASS 75Ω
DRIVER
FILTER
CY IN 10 6dB 20 CY OUT
LOW-PASS
150kΩ FILTER
CLAMP BIAS 13.5MHz
CLP 11 19 GND2
6.75MHz
150kΩ 75Ω
BIAS LOW-PASS
DRIVER
FILTER
CB IN 12 6dB 18 CB OUT
LOW-PASS
FILTER
MUTE2 13 13.5MHz
17 GND2
6.75MHz
150kΩ 75Ω
BIAS LOW-PASS
DRIVER
FILTER
CR IN 14 6dB 16 CR OUT
LOW-PASS
FILTER
13.5MHz 15 GND2
66
HCD-AZ2D/AZ5D
• IC Pin Function Description

DMB10 BOARD IC102 CXD9804R (RF AMP, SERVO DSP, MPEG DECODER)
Pin No. Pin Name I/O Description
1 AGND – Ground terminal
2 DVDA I AC coupled input path A
3 DVDB I AC coupled input path B
4 DVDC I AC coupled input path C
5 DVDD I AC coupled input path D
6 DVDRFIP I AC coupled DVD RF signal input from the optical pick-up block
7 DVDRFIN I AC coupled DVD RF signal input terminal Not used
8 MA I DC coupled main-beam RF signal input A
9 MB I DC coupled main-beam RF signal input B
10 MC I DC coupled main-beam RF signal input C
11 MD I DC coupled main-beam RF signal input D
12 SA I DC coupled sub-beam RF signal input A Not used
13 SB I DC coupled sub-beam RF signal input B Not used
14 SC I DC coupled sub-beam RF signal input C Not used
15 SD I DC coupled sub-beam RF signal input D Not used
16 CDFON I CD focusing error negative input terminal Not used
17 CDFOP I CD focusing error positive input terminal Not used
18 TNI I 3 beam satellite PD signal negative input from the optical pick-up block
19 TPI I 3 beam satellite PD signal positive input from the optical pick-up block
20, 21 MDI1, MDI2 I Laser power monitor input from the optical pick-up block
22 LDO2 O Laser diode drive signal output to the optical pick-up block (for DVD)
23 LDO1 O Laser diode drive signal output to the optical pick-up block (for CD)
24 SVDD3 – Power supply terminal (+3.3V)
25 CSO O Central servo signal output terminal Not used
26 RFLVL O RFRP low pass output terminal Not used
27 SGND – Ground terminal
28 V2REFO O Reference voltage (+2.8V) output terminal Not used
29 V20 O Reference voltage (+2V) output to the optical pick-up block
30 VREFO O Reference voltage (+1.4V) output terminal
31 FEO O Focus error monitor output terminal Not used
32 TEO O Tracking error monitor output terminal Not used
33 TEZISLV O Slice level of tracking error signal output terminal Not used
34 OPOUT O Output from the internal operational amplifier Not used
35, 36 OPIN I Input to the internal operational amplifier Not used
37 DMO O Spindle motor control signal output to the motor driver
38 FMO O Sled motor control signal output to the motor driver
39 TROPENPWM O Loading motor control signal output to the motor driver
40 IOPMON I Power monitor terminal
41 TRO O Tracking coil control signal output to the coil driver
42 FOO O Focus coil control signal output to the coil driver
43 USBVSS – Ground terminal
44 USBP I/O USB communication data input/output terminal Not used
45 USBM I/O USB communication data input/output terminal Not used
46 USBVDD3 – Power supply terminal (+3.3V)
47 SPFG I Spindle motor hall sensor input from the motor driver
48 to 50 AN0 to AN2 I/O Not used
51 NAMUTE – Muting control signal output terminal Not used
52 DVDD18 – Power supply terminal (+1.8V)
67
HCD-AZ2D/AZ5D

IOA2 to IOA8,
53 to 61 O Address signal output to the flash ROM
IOA18, IOA19
62 DVSS – Ground terminal
63 APLLCAP – Connection terminal for an external capacitor
64 APLLVSS – Ground terminal
65 VDD3 – Power supply terminal (+3.3V)
66 IOWR O Write enable signal output to the flash ROM
67 to 72 IOA16 to IOA11 O Address signal output to the flash ROM
74 to 76 IOA10, IOA9,IOA20 O Address signal output to the flash ROM
77 IOCS O Chip select signal output to the flash ROM
78 IOA1 O Address signal output to the flash ROM
79 IOOE O Output enable signal output to the flash ROM
81 to 84 AD0 to AD3 I/O Data/address signal input/output terminal with the flash ROM
86 to 88 AD4 to AD6 I/O Data/address signal input/output terminal with the flash ROM
89 IOA21 O Address signal output to the flash ROM
90 ALE O Address latch enable signal output terminal Not used
91 AD7 I/O Data/address signal input/output terminal with the flash ROM
92, 93 IOA17, IOA0 O Address signal output to the flash ROM
95 UWR O Write enable signal output terminal Not used
96 URD O Data read enable signal output terminal Not used
98 IFSDO O Serial data output to the system controller
99 IFCK I Serial data transfer clock signal input from the system controller
100 XIFCS I Chip select signal input from the system controller
101 IFSDI I Serial data input from the system controller
102 SCL O Serial data transfer clock signal output to the EEPROM and D/A converter
103 SDA I/O Two-way data bus with the EEPROM and D/A converter
104 TRG-SW I Trigger detection switch input terminal
105 IFBSY I Busy signal input from the system controller
Receive data input terminal for UART communication when data writing to
106 RXD I
flash memory
Transmit data output terminal for UART communication when data writing to
107 TXD O
flash memory
109 ICE I ICE mode enable signal input terminal Not used
110 PRST I Reset signal input from the system controller “L”: reset
111 IR I IR control signal input terminal Not used
112 INT0 O Interrupt request signal output terminal Not used
113 DQM0 O Data mask signal output to the SD-RAM
114 MREQ O Muting request signal output to the system controller
115 RD7 I/O Two-way data bus with the SD-RAM
117, 118 RD6, RD5 I/O Two-way data bus with the SD-RAM
120, 121 RD4, RD3 I/O Two-way data bus with the SD-RAM
68
HCD-AZ2D/AZ5D

123 to 125 RD2 to RD0 I/O Two-way data bus with the SD-RAM
128 to 133 RD14 to RD9 I/O Two-way data bus with the SD-RAM
136 GPIO – Not used
137 DQM1 O Data mask signal output to the SD-RAM
138 RWE O Write enable signal output to the SD-RAM
139 CAS O Column address strobe signal output to the SD-RAM
140 RAS O Row address strobe signal output to the SD-RAM
142 RCS O Chip select signal output to the SD-RAM
143 BA0 O Bank address signal output to the SD-RAM
145 BA1 O Bank address signal output to the SD-RAM
146, 147 RA10, RA0 O Address signal output to the SD-RAM
149 to 151 RA1 to RA3 O Address signal output to the SD-RAM
153 RVREF – Not used
154 RCLKB – Not used
156 RCLK O Serial data transfer clock signal output to the SD-RAM
157 CKE O Clock enable signal output to the SD-RAM
158 to 160 RA11, RA9, RA8 O Address signal output to the SD-RAM
162 RA7 O Address signal output to the SD-RAM
164 to 166 RA6 to RA4 O Address signal output to the SD-RAM
168 DISC/X – Not used
169 RGB – Not used
170 XSMRST – Not used
171 WIDE O Wide control signal output to the video amplifier
172 NT – Not used
174 EUR – Not used
176 LIMSW I Limit detection switch input terminal
177 OCKSW I Disc slot in/out detection switch input terminal
178 VCLK – Not used
179 CKSW I Chucking detection switch input terminal
180 IO3 – Not used
181 TSDM O Thermal shut down signal output to the motor/coil driver
183 MUTE O Muting signal output to the motor/coil driver
184 MUTE123 O Muting signal output to the motor/coil driver
185 REV O Loading motor drive signal output to the motor driver (reverse direction)
186 FWD O Loading motor drive signal output to the motor driver (forward direction)
69
HCD-AZ2D/AZ5D

187 MSW O DVD/CD selection signal output terminal
188 DSEL O Interlace/progressive selection signal output to the video amplifier
189 DAVCC – Power supply terminal (+3.3V)
190 VREF – For bandgap reference voltage terminal
191 FS – Full scale adjustment terminal
192 YUV0 O Video data output terminal Not used
193 DAVSS – Ground terminal
194 YUV1 O Y signal output to the video amplifier
195 DAVDD – Power supply terminal (+3.3V)
196 YUV2 O Chroma signal output to the video amplifier
198 YUV3 O Video signal output to the video amplifier
199 DAVDD – Power supply terminal (+3.3V)
200 YUV4 O Chroma signal output to the video amplifier
202, 203 YUV5, YUV6 O Component video signal output to the video amplifier
205 MIC I Microphone detection signal input terminal “H”: microphone in
206 VOICE – Not used
207 KRMOD O Karaoke mode selection signal output to the system controller
208 SMSCK – Not used
209 SPDATA I SPDIF digital audio data input from the A/D converter (HCD-AZ5D only)
210 SMSDO – Not used
211 XSMCS – Not used
213 ALRCK O L/R sampling clock signal output to the D/A converter and A/D converter
214 ABCK O Bit clock signal output to the D/A converter and A/D converter
215 ACLK O Master clock signal output to the D/A converter and A/D converter
217 to 219 ASDATA0 to ASDATA2 O Audio serial data output to the D/A converter
220 XRST O Reset signal output to the D/A converter “L”: reset
222 ASDATA4 O Audio serial data output to the D/A converter
224 DWIDE – Not used
225 SPDIF O SPDIF digital audio signal output terminal (HCD-AZ2D only)
226 RFGND18 – Ground terminal
227 RFVDD18 – Power supply terminal (+1.8V)
228 XTALO O System clock output terminal (27 MHz)
229 XTALI I System clock input terminal (27 MHz)
230 JITFO O Output terminal of the RF jitter meter
231 JITFN I Input terminal of the RF jitter meter
232 PLLVSS – Ground terminal
233 IDAC – Not used
234 PLLVDD3 – Power supply terminal (+3.3V)
235 LPFON O Data PLL loop filter output terminal
236 LPFIP I Data PLL loop filter input terminal
237 LPFIN I Data PLL loop filter input terminal
238 LPFOP O Data PLL loop filter output terminal
239 VDD3 – Power supply terminal (+3.3V)
70
HCD-AZ2D/AZ5D

240 VCM – Not used
241 VSS – Ground terminal
242 VREFP – For reference voltage terminal
243 VREFN – For reference voltage terminal
244 RFVDD3 – Power supply terminal (+3.3V)
245 RFRPDC O RF ripple detect output terminal
246 RFRPAC I RF ripple detect input terminal
247 HRFZC I High frequency RF ripple zero crossing terminal
248 CRTPLP O Defect level filter capacitor connecting terminal
249 RFGND – Ground terminal
250 CEQP – Not used
251 CEQN – Not used
252 OSP O RF offset cancellation capacitor connecting terminal
253 OSN O RF offset cancellation capacitor connecting terminal
254 RFGC O RF AGC loop capacitor connecting for DVD-ROM
255 IREF I Reference current input terminal
256 AVDD3 – Power supply terminal (+3.3V)
71
HCD-AZ2D/AZ5D
MAIN BOARD IC401 M30622MEP-A06FPU0 (SYSTEM CONTROLLER)

1 P_SM_DATA O Serial data output to the stream processor
2 P_SM_CLK O Serial data transfer clock signal output to the stream processor
3 ML9208 RESET O Reset signal output to the fluorescent indicator tube driver “L”: reset
4 SIRCS I Remote control signal input from the remote control receiver
5 ML9208 DATA O Serial data output to the fluorescent indicator tube driver
6 ML9208 CS O Chip select signal output to the fluorescent indicator tube driver
7 ML9208 CLK O Serial data transfer clock signal output to the fluorescent indicator tube driver
8 BYTE I External data bus line byte selection signal input terminal Fixed at “L” in this set
9 CN VSS – Ground terminal
10 XC-IN I Sub system clock input terminal (32.768 kHz)
11 XC-OUT O Sub system clock output terminal (32.768 kHz)
System reset signal input terminal “L”: reset For several hundreds msec. after the
12 RESET I
power supply rises, “L” is input, then it change to “H”
13 X-OUT O Main system clock output terminal (5 MHz)
15 X-IN I Main system clock input terminal (5 MHz)
16 VCC – Power supply terminal (+3.3V)
17 NMI I Non-maskable interrupt input terminal Fixed at “H” in this set
18 USB_A_DET I USB memory detection signal input terminal Not used
P_DVD_I_ I
19 Disc slot in/out detection switch input terminal
MTK_SLOT_IN
20 AC-CUT I AC cut on/off detection signal input terminal “L”: AC cut on
Deck-A cassette detection signal input from the tape mechanism deck block “L”:
21 TC A HALF I
cassette in
Deck-A playback detection signal input from the tape mechanism deck block “L”
22 TC A PLAY SW I
playback
23 P_VIDEO_MUTE O Video muting on/off control signal output to the video amplifier “H”: muting on
24 BACKLIGHT O LED drive signal output for back light “H”: LED on
25 P_I_MREQ I Muting request signal input from the servo DSP
26 P_I_DVD_XIFCS I Chip select signal input from the servo DSP
27 P_I_KRMOD I Karaoke mode selection signal input from the servo DSP
28 P_O_DVD_BUSY O Busy signal output to the servo DSP
29 IIC-CLK O IIC data transfer clock signal output terminal Not used
30 IIC-DATA O IIC data output terminal Not used
31 P_O_DVD_SO O Serial data output to the servo DSP
32 P_I_DVD_SI I Serial data input from the servo DSP
33 PI_DVD_SCK O Serial data transfer clock signal output to the servo DSP
34 P_ID_IO_SYSRST O Reset signal output to the servo DSP “L”: reset
Deck-A side capstan/reel motor drive signal output terminal “L”: FWD/stop, “H”:
35 TC A CAPM O
REV
36 TC A TRG O Deck-A side trigger plunger drive signal output terminal “H”: plunger on
37 TUNED I Tuning detection signal input from the tuner unit “L”: tuned
38 ST-DOUT O PLL serial data output to the tuner unit
39 ST-CLK O PLL serial data transfer clock signal output to the tuner unit
40 ST-DIN I PLL serial data input from the tuner unit
41 ST-CE O PLL serial chip enable signal output to the tuner unit
42 P_LINK_LFE_SW O Audio signal (for sub woofer) selection signal output terminal (HCD-AZ5D only)
43 NO USE O Not used
44 P_TC_AMS_MUTE O Automatic music sensor muting on/off control signal output terminal “L”: muting on
72
HCD-AZ2D/AZ5D

45 PCM2704 POWER O USB D/A converter power on/off control signal output terminal “H”: power on
46 P_RECOUT_MUTING I Recout muting on/off control signal output terminal “L”: muting on
47 TCC720 POWER O USB memory power on/off control signal output terminal “H”: power on”
DVD section power on/off control signal output terminal “H”: power onDigital out
48 P_O_DVD_POWER O
muting on/off control signal output terminal “L”: muting on (HCD-AZ2D only)
49 STBY RELAY O Relay drive signal output for the main power “H”: power on
50 FAN DRIVE O Fan motor drive signal output terminal “L”: motor on
51 P_ADC_RESET O Power down signal output to the A/D converter “L”: power down
52 P_SM_INIT O Initialize signal output to the stream processor
53 P_SM_NSP_MUTING O NSP muting on/off control signal output to the stream processor “L”: muting on
Over temperature warning signal input from the digital power amplifier “L”: over
54 P_SM_OTW I
temperature
55 P_SM_SD I Shut down signal input from the digital power amplifier “L”: shut down
56 P_SM_DRV_RST O Reset signal output to the digital power amplifier “L”: reset
57 P_SM_OVF I Over flow flag input from the stream processor “L”: over flow
58 P_SM_CS1 O Chip select signal output to the stream processor (for front L-ch and R-ch)
Chip select signal output to the stream processor (for center and sub woofer)
59 P_SM_CS2 O
(HCD-Z5D only)
Chip select signal output to the stream processor (for surround L-ch and R-ch)
60 P_SM_CS3 O
(HCD-AZ5D only)
61 HP_MUTING O Headphone muting on/off control signal output terminal “L”: muting on
62 VCC – Power supply terminal (+3.3V)
63 P_HEADPHONE _IN I Headphone detection signal input terminal “H”: headphone in
65 P_MIC_IN I Microphone detection signal input terminal “H”: microphone in
66 P_LINE_MUTING O Line muting on/off control signal output terminal “L”: muting on
67 TC BIAS O Recording bias on/off control signal output terminal “H”: bias on
68 TC PB/REC O Recording/playback selection signal output terminal “L”: recording, “H”: playback
69 TC REC MUTE O Recording muting on/off control signal output terminal “L”: muting on
70 TC LINE MUTE O Playback muting on/off control signal output terminal “H”: muting on”
71 P_AMPIC_DATA O Serial data output to the electrical volume
72 P_AMPIC_CLK O Serial data transfer clock signal output to the electrical volume
73 P_DISP_KEY I Key wake up signal input terminal
74 P_POWER_KEY I Key wake up signal input terminal
Automatic music sensor detection signal input terminal “L”: music is present,
75 TC AMS IN I
“H”: music is not present
Audio signal (for surround L-ch and R-ch) selection signal output terminal
76 P_LINK_SW O
(HCD-AZ5D only)
77 P_A_MUTE O CD/DVD analog muting on/off control signal output terminal “L”: muting on
Deck-B side capstan/reel motor drive signal output terminal “L”: FWD/stop,
78 TC B CAPM O
“H”: REV
79 TC B TRG O Deck-B side trigger plunger drive signal output terminal “H”: plunger on
Deck-B playback detection signal input from the tape mechanism deck block
80 TC B PLAY SW I
“L” playback
81, 82 KEY IN_3,KEY IN_1 I Touch sensor key input terminal
83 to 86 DRIVE1 to DRIVE 4 O Touch sensor key drive signal output terminal
87 KEY IN_2 I Touch sensor key input terminal
88 NO USE I Not used
89 P_VACS I Sound level signal for VACS input from the electrical volume
90 TAPE B SHUT I Deck-B tape reel rotating detection signal input from the tape mechanism deck block
73
HCD-AZ2D/AZ5D

Deck-B cassette detection signal input from the tape mechanism deck block
91 TAPE B HALF/REC I “L”: cassette inRecording-proof (forward and reverse direction) detection signal input
from the tape mechanism deck block “L”: recording possible
92 SPEC-IN I Destination setting input terminal (A/D input)
93 MODEL-IN I Model setting input terminal (A/D input)
94, 95 KEY_2, KEY_1 I Key input terminal (A/D input)
96 AVSS – Ground terminal (analog system)
97 TAPE A SHUT I Deck-A tape reel rotating detection signal input from the tape mechanism deck block
98 VREF I Reference voltage (+3.3V) input terminal (analog system)
99 AVCC – Power supply terminal (+3.3V) (analog system)
100 STANDBY LED O LED drive signal output of the standby indicator “H”: LED on
74
HCD-AZ2D/AZ5D
SECTION 8
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark
may have some difference from the original are seldom required for routine service. Some 0 or dotted line with mark 0 are
one. delay should be anticipated when ordering critical for safety.
• Color Indication of Appearance Parts these items. Replace only with part number
Example: • The mechanical parts with no reference specified.
KNOB, BALANCE (WHITE) . . . (RED) number in the exploded views are not supplied.
↑ ↑ • Accessories are given in the last of the
Parts Color Cabinet's Color electrical parts list.
• Abbreviation
AUS : Australian model E13 : 220-230V AC area in E model (Russian model) MY : Malaysia model
E2 : 120V AC area in E model E15 : Iranian model PH : Philippines model
E3 : 240V AC area in E model EA : Saudi Arabia model SP : Singapore model
E12 : 220-240V AC area in E model KR : Korean model TH : Thai model
8-1. SIDE PANEL SECTION
#1
1
top panel (TC) section

#1
#1
#1
not supplied
MAIN board
3 section
not supplied
#1
#1
front panel section

#1
2
#1
3
#1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 2-349-682-01 PANEL (A), SIDE 3 4-227-843-31 SCREW (TP), FLAT HEAD
2 2-349-683-01 PANEL (B), SIDE #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
75
HCD-AZ2D/AZ5D
8-2. FRONT PANEL SECTION
not supplied 62
(KEY board)
59 59 59
64 63
not supplied
59
60 65 59
(including touch sensor (TS1))
not supplied not supplied
(EJECTboard) (touch sensor (TS1)
included in 60)
59
59 not 59
not supplied supplied 61
59
59
not supplied
59 not supplied
not supplied not supplied (SIRCS board)
56 58
57 not supplied
not supplied 59
(touch sensor (TS1)) 59
59
59 66
53 54 not supplied
52
59 67 59
not supplied
55 not supplied
59
#2
not supplied 69 not supplied

51
68
not supplied #1
51 2-349-646-01 PLATE (TC), INDICATION 61 1-769-977-11 WIRE (FLAT TYPE) (13 CORE)
52 2-349-645-01 PANEL (LID) 62 1-828-320-11 WIRE (FLAT TYPE) (11 CORE)
53 2-349-647-01 LID (TC-B)
54 4-238-631-01 TAPE SPRING 63 1-469-829-11 CORE, FERRITE
55 2-349-654-01 LID (MIC) 64 A-1091-269-A FL BOARD, COMPLETE (EXCEPT AZ5D: TH)
64 A-1114-866-A FL BOARD, COMPLETE (AZ5D: TH)
56 4-231-841-01 SPRING (HEART CAM-B) 65 1-828-936-11 WIRE (FLAT TYPE) (5 CORE)
57 4-231-825-01 CAM (B), HEART 66 1-790-378-11 WIRE (FLAT TYPE) (8 CORE)
58 4-224-104-41 DAMPER
59 3-087-053-01 +BVTP 2.6 (3CR) 67 1-797-175-11 DECK, MECH (CMAL1Z254A) (DECK-B)
60 X-2025-505-1 FRONT PANEL ASSY (D) 68 A-1091-273-A MIC BOARD, COMPLETE (EXCEPT AZ5D: TH)
(AZ5D: E3, E12, E15, EA, SP, MY, AUS) 68 A-1114-870-A MIC BOARD, COMPLETE (AZ5D: TH)
69 4-245-464-02 DAMPER
60 X-2048-633-1 FRONT PANEL ASSY (2D) (AZ2D) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
60 X-2055-470-1 FRONT PANEL ASSY (AZ5D: TH)
60 X-2059-332-1 FRONT PANEL ASSY (AZ5D: E2) #2 7-685-853-04 SCREW +BVTT 2X6 (S)
76
HCD-AZ2D/AZ5D
8-3. TOP PANEL (TC) SECTION
103
102
104
108
109 not supplied
107
not supplied
105
105
not supplied
105
106
105
101
105
not supplied
105 105
101 1-828-947-11 WIRE (FLAT TYPE) (7 CORE) 105 3-087-053-01 +BVTP 2.6 (3CR)
102 4-238-631-01 TAPE SPRING 106 1-797-174-11 DECK, MECH (CMAL5Z230) (DECK-A)
103 2-349-658-01 LID (TC-A) 107 4-231-824-01 CAM (A), HEART
104 2-349-657-01 PANEL (TC), TOP (AZ5D) 108 4-224-104-41 DAMPER
104 2-349-657-11 PANEL (TC), TOP (AZ2D) 109 4-231-836-01 SPRING (HEART CAM-A)
77
HCD-AZ2D/AZ5D
8-4. MAIN BOARD SECTION
156
(AZ2D)
155 #3 #1
153 #1
#1
#1
154
#1
157
(AZ5D)
152 #1
#1
DMB10 board #1
section
not supplied
#1
M901
151
#1
chassis section
151 1-773-125-11 WIRE (FLAT TYPE) (19 CORE) (AZ2D) 156 A-1092-103-A MAIN BOARD, COMPLETE (AZ5D: AUS)
151 1-773-160-11 WIRE (FLAT TYPE) (21 CORE) (AZ5D) 156 A-1092-104-A MAIN BOARD, COMPLETE (AZ5D: EA)
152 1-828-002-11 WIRE (FLAT TYPE) (17 CORE) (AZ2D) 156 A-1114-671-A MAIN BOARD, COMPLETE (AZ2D: PH)
152 1-828-361-11 WIRE (FLAT TYPE) (19 CORE) (AZ5D) 156 A-1114-680-A MAIN BOARD, COMPLETE (AZ2D: E15)
153 1-400-640-11 CORE, FERRITE 156 A-1114-696-A MAIN BOARD, COMPLETE (AZ2D: E3)
154 1-828-333-11 WIRE (FLAT TYPE) (13 CORE) 156 A-1114-703-A MAIN BOARD, COMPLETE (AZ2D: E12)
155 1-828-953-11 WIRE (FLAT TYPE) (9 CORE) 156 A-1114-711-A MAIN BOARD, COMPLETE (AZ5D: E15)
156 A-1091-182-A MAIN BOARD, COMPLETE (AZ2D: SP, MY) 156 A-1114-719-A MAIN BOARD, COMPLETE (AZ5D: E3)
156 A-1091-183-A MAIN BOARD, COMPLETE (AZ2D: E2) 156 A-1114-745-A MAIN BOARD, COMPLETE (AZ5D: E12)
156 A-1091-184-A MAIN BOARD, COMPLETE (AZ2D: E13) 156 A-1114-860-A MAIN BOARD, COMPLETE (AZ5D: TH)
156 A-1091-185-A MAIN BOARD, COMPLETE (AZ5D: SP, MY) 157 1-693-670-11 TUNER UNIT (TM-10KR) (AZ2D: KR)
156 A-1091-186-A MAIN BOARD, COMPLETE (AZ5D: E2) 157 1-693-671-11 TUNER UNIT (TM-10E) (EXCEPT AZ2D: KR)
156 A-1092-100-A MAIN BOARD, COMPLETE (AZ2D: AUS) M901 1-787-099-11 FAN, DC
156 A-1092-101-A MAIN BOARD, COMPLETE (AZ2D: EA) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
156 A-1092-102-A MAIN BOARD, COMPLETE (AZ2D: KR) #3 7-685-871-01 SCREW +BVTT 3X6 (S)
78
HCD-AZ2D/AZ5D
8-5. DMB10 BOARD SECTION
203
not supplied
(VIDEO board)
#1 205
204 #1
202
CDM86-DVBU101
not supplied
201
#1
201 4-247-752-01 FOOT, RUBBER 202 A-1114-682-A DMB10 BOARD, COMPLETE (AZ2D: E15)
202 A-1091-196-A DMB10 BOARD, COMPLETE (AZ5D: SP, MY) 202 A-1114-698-A DMB10 BOARD, COMPLETE (AZ2D: E3)
202 A-1091-367-A DMB10 BOARD, COMPLETE (AZ2D: SP, MY) 202 A-1114-705-A DMB10 BOARD, COMPLETE (AZ2D: E12)
202 A-1091-368-A DMB10 BOARD, COMPLETE (AZ2D: E2)
202 A-1091-369-A DMB10 BOARD, COMPLETE (AZ2D: E13) 202 A-1114-713-A DMB10 BOARD, COMPLETE (AZ5D: E15)
202 A-1114-721-A DMB10 BOARD, COMPLETE (AZ5D: E3)
202 A-1091-370-A DMB10 BOARD, COMPLETE (AZ5D: E2) 202 A-1114-747-A DMB10 BOARD, COMPLETE (AZ5D: E12)
202 A-1092-116-A DMB10 BOARD, COMPLETE (AZ2D: AUS) 202 A-1114-910-A DMB10 BOARD, COMPLETE (AZ5D: TH)
202 A-1092-117-A DMB10 BOARD, COMPLETE (AZ2D: EA) 203 1-828-304-11 WIRE (FLAT TYPE) (7 CORE)
202 A-1092-118-A DMB10 BOARD, COMPLETE (AZ2D: KR)
202 A-1092-119-A DMB10 BOARD, COMPLETE (AZ5D: AUS) 204 1-400-640-11 CORE, FERRITE
205 1-828-329-11 WIRE (FLAT TYPE) (13 CORE)
202 A-1092-120-A DMB10 BOARD, COMPLETE (AZ5D: EA) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
202 A-1114-673-A DMB10 BOARD, COMPLETE (AZ2D: PH)
79
HCD-AZ2D/AZ5D
8-6. CHASSIS SECTION
252
#4 (AZ5D)
#1
#5
not supplied M902

not
supplied
252 #1
254
253 (AZ5D) (AZ2D)
not supplied
255
(AZ5D)
not supplied 256
not supplied
252 252
#1 #1
251 not supplied

(SP OUT board) #1
258
not supplied
#1
#1
not supplied
(AZ5D)
#1
257
not supplied
#1
251 A-1091-194-A S-MASTER BOARD, COMPLETE (AZ2D) * 255 3-703-571-12 BUSHING (S) (4516), CORD
251 A-1091-195-A S-MASTER BOARD, COMPLETE (AZ2D: E2, E3, E15/AZ5D: E2, E3, E15)
(AZ5D: E2, E3, E12, E15, EA, SP, MY, AUS) 256 1-500-497-11 FILTER, CLAMP (FERRITE CORE)
251 A-1114-873-A S-MASTER BOARD, COMPLETE (AZ5D: TH) 0 257 1-468-896-11 REGULATOR, SWITCHING
252 3-077-331-21 +BV 3 (3-CR) (AZ2D: E12, KR, AUS)
253 1-828-947-11 WIRE (FLAT TYPE) (7 CORE) (AZ5D) 0 257 1-468-897-11 REGULATOR, SWITCHING
(AZ2D: E2, E3, E13, E15, EA, SP, MY, PH)
0 254 1-769-079-23 CORD, POWER (AZ2D: KR)
0 254 1-777-071-53 CORD, POWER (AZ2D: E12, E13, EA, SP, MY, 0 257 1-468-898-11 REGULATOR, SWITCHING
PH/AZ5D: E12, EA, SP, MY) (AZ5D: E12, TH, AUS)
0 254 1-783-203-13 CORD, POWER (AZ2D: AUS/AZ5D: AUS) 0 257 1-468-899-11 REGULATOR, SWITCHING
0 254 1-824-642-11 CORD, POWER (WITH CONNECTOR) (AZ5D: E2, E3, E15, EA, SP, MY)
(AZ5D: TH) 258 1-500-386-11 FILTER, CLAMP (FERRITE CORE)
0 254 1-827-226-11 CORD, POWER M902 1-787-331-21 FAN, D.C. (AZ5D)
(AZ2D: E2, E3, E15/AZ5D: E2, E3, E15) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
255 3-703-244-00 BUSHING (2104), CORD #4 7-685-650-79 SCREW +BVTP 3X16 TYPE2 IT-3
(EXCEPT AZ2D: E2, E3, E15/AZ5D: E2, E3, E15) #5 7-685-647-79 SCREW +BVTP 3X10 TYPE2 TT (B)
80
HCD-AZ2D/AZ5D
8-7. DVD MECHANISM DECK SECTION-1

(CDM86-DVBU101)
355
DVD mechanism deck section-2
351
356
not supplied
not supplied 353
359 353
357
(including sled motor, spindle motor)
not supplied not supplied

(spindle motor) (sled motor)
354
354
352
352
358
not supplied
351 4-245-639-01 LEVER (CL UP2) 356 A-1114-646-A MD (AU) ASSY
352 3-087-599-01 INSULATOR SCREW 0 357 8-820-291-02 OPTICAL PICK-UP BLOCK KHM-310CAB/C2RP
353 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) (Including sled motor, spindle motor)
354 2-634-618-01 INSULATOR 358 1-828-771-11 WIRE (FLAT TYPE) (24 CORE)
355 2-023-068-01 TAPPING +B 2.6X8 359 2-023-066-01 TAPPING +B 2X6
81
HCD-AZ2D/AZ5D

(CDM86-DVBU101)
410
402
410 410
not supplied
DVD mechanism section-3 (MS-214 board)
401
407 409
406 M001
405 408
DVD mechanism section-4
404
403
#6
401 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) 407 4-245-645-01 GEAR (IDL-E)
402 2-023-648-01 TAPPING +B 2X10 408 4-246-203-01 LEVER (RELEASE)
403 4-245-653-01 BELT (MOT) 409 4-245-630-01 LEVER (SW)
404 4-245-662-02 PULLEY (GEAR) 410 2-023-068-01 TAPPING +B 2.6X8
405 4-245-646-01 GEAR (IDL-F)
M001 X-4955-496-1 MOTOR (PULLEY) ASSY (LOADING)
406 4-245-644-01 GEAR (IDL-D) #6 7-623-921-01 WASHER 1.7, NYLON
82
HCD-AZ2D/AZ5D

(CDM86-DVBU101)
464
not supplied
not supplied
461
460 465
459
458
466
457 467
455 462
456
456
455
not supplied
454
453
463
452
451
453
452
451
451 4-245-627-01 WASHER (6-2.7-0.4) 460 4-245-651-11 GEAR (IDL-L)
452 4-245-637-11 ROLLER, RUBBER
453 4-245-649-01 GEAR (IDL-I) 461 4-245-640-01 GEAR (CAP)
454 4-245-657-11 LEVER (LOADING-R) 462 4-245-632-11 SPR-T (LOADING-L)
455 4-245-647-01 GEAR (IDL-G) 463 4-245-656-11 LEVER (LOADING-L)
464 3-088-752-01 FLOATING SCREW (+PTPWH M2.6)
456 4-245-648-01 GEAR (IDL-H) 465 4-245-636-01 SPR-T CL DOWN
457 4-245-655-01 CHASSIS (TOP)
458 4-245-631-11 SPT-T (LOADING-R) 466 4-245-658-11 LEVER (DISC STOP)
459 4-245-650-01 GEAR (IDL-J) 467 4-245-659-11 LEVER (DISC SENSOR)
83
HCD-AZ2D/AZ5D

(CDM86-DVBU101)
510
509
508
507
511
506
512
505 513
509
504
514
503 not supplied
not supplied
515
501
502
501 4-245-643-01 GEAR (IDL-C) 509 4-245-640-01 GEAR (CAP)
502 X-4955-483-1 LEVER (GEAR LOADING) ASSY 510 4-245-628-01 LEVER (BU LOCK)
503 2-515-536-01 SPRING (DIR), TENSION COIL
504 4-245-642-01 GEAR (IDL-B) 511 4-248-206-01 WASHER (3-1-0.4)
505 4-245-814-01 LEVER (DIR FIRST) 512 4-245-624-01 LEVER, CLOSE
513 4-245-635-01 SPR-E LEVER CLOSE
506 2-515-534-01 SPRING (DIR BACK), TENSION COIL 514 4-245-629-01 GEAR (BU LOCK)
507 4-245-660-11 LEVER (DIR) 515 4-245-644-01 GEAR (IDL-D)
508 4-245-641-01 GEAR (IDL-A)
84
HCD-AZ2D/AZ5D
SECTION 9
DMB10
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark
parts list may be different from the parts are seldom required for routine service. 0 or dotted line with mark 0 are
specified in the diagrams or the components Some delay should be anticipated when critical for safety.
used on the set. ordering these items. Replace only with part number
• -XX and -X mean standardized parts, so they • SEMICONDUCTORS specified.
may have some difference from the original In each case, u: µ, for example:
one. uA... : µA... uPA... : µPA... When indicating parts by reference
• RESISTORS uPB... : µPB... uPC... : µPC... number, please include the board.
All resistors are in ohms. uPD... : µPD...
METAL: Metal-film resistor. • CAPACITORS
METAL OXIDE: Metal oxide-film resistor. uF: µF
F: nonflammable • COILS
• Abbreviation uH: µH
AUS : Australian model E12 : 220-240V AC area in E model EA : Saudi Arabia model PH : Philippines model
E2 : 120V AC area in E model E13 : 220-230V AC area in E model (Russian model) KR : Korean model SP : Singapore model
E3 : 240V AC area in E model E15 : Iranian model MY : Malaysia model TH : Thai model
A-1091-196-A DMB10 BOARD, COMPLETE (AZ5D: SP, MY) C129 1-124-779-00 ELECT CHIP 10uF 20% 16V
A-1091-367-A DMB10 BOARD, COMPLETE (AZ2D: SP, MY) C130 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
A-1091-368-A DMB10 BOARD, COMPLETE (AZ2D: E2)
A-1091-369-A DMB10 BOARD, COMPLETE (AZ2D: E13) C131 1-125-838-11 CERAMIC CHIP 2.2uF 10% 6.3V
A-1091-370-A DMB10 BOARD, COMPLETE (AZ5D: E2) C132 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C133 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
A-1092-116-A DMB10 BOARD, COMPLETE (AZ2D: AUS) C135 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V
A-1092-117-A DMB10 BOARD, COMPLETE (AZ2D: EA) C136 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
A-1092-118-A DMB10 BOARD, COMPLETE (AZ2D: KR)
A-1092-119-A DMB10 BOARD, COMPLETE (AZ5D: AUS) C137 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
A-1092-120-A DMB10 BOARD, COMPLETE (AZ5D: EA) C138 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C139 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
A-1114-673-A DMB10 BOARD, COMPLETE (AZ2D: PH) C140 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
A-1114-698-A DMB10 BOARD, COMPLETE (AZ2D: E3)
A-1114-721-A DMB10 BOARD, COMPLETE (AZ5D: E3) C145 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
A-1114-910-A DMB10 BOARD, COMPLETE (AZ5D: TH)
************ C147 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
< CAPACITOR > C149 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C150 1-124-779-00 ELECT CHIP 10uF 20% 16V
C101 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C151 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25V
C105 1-126-205-11 ELECT CHIP 47uF 20% 6.3V C152 1-162-916-11 CERAMIC CHIP 12PF 5% 50V
C106 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C153 1-162-916-11 CERAMIC CHIP 12PF 5% 50V
C112 1-126-205-11 ELECT CHIP 47uF 20% 6.3V
C117 1-124-779-00 ELECT CHIP 10uF 20% 16V
C118 1-124-779-00 ELECT CHIP 10uF 20% 16V C163 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C120 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C167 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C122 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C128 1-162-965-11 CERAMIC CHIP 0.0015uF 10% 50V C177 1-126-205-11 ELECT CHIP 47uF 20% 6.3V
85
HCD-AZ2D/AZ5D
DMB10
C179 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V (AZ5D)
C180 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C3608 1-124-779-00 ELECT CHIP 10uF 20% 16V
C182 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C3609 1-124-779-00 ELECT CHIP 10uF 20% 16V
(AZ5D)
C190 1-126-205-11 ELECT CHIP 47uF 20% 6.3V C3621 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C205 1-164-230-11 CERAMIC CHIP 220PF 5% 50V (AZ5D)
C206 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C3705 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C217 1-126-204-11 ELECT CHIP 47uF 20% 16V C3714 1-162-961-11 CERAMIC CHIP 330PF 10% 50V
C220 1-124-779-00 ELECT CHIP 10uF 20% 16V C3724 1-162-961-11 CERAMIC CHIP 330PF 10% 50V
(AZ5D)
(AZ5D)
C306 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C3742 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C307 1-126-206-11 ELECT CHIP 100uF 20% 6.3V (AZ5D)
C402 1-126-204-11 ELECT CHIP 47uF 20% 16V (AZ5D)
C3601 1-117-370-11 CERAMIC CHIP 10uF 10V (AZ5D)
(AZ5D) C3752 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D) C3763 1-162-961-11 CERAMIC CHIP 330PF 10% 50V
(AZ5D)
86
HCD-AZ2D/AZ5D
DMB10
C3764 1-162-961-11 CERAMIC CHIP 330PF 10% 50V < IC >

(AZ5D)
C3771 1-162-977-11 CERAMIC CHIP 0.0018uF 10% 50V IC101 6-805-728-01 IC S29JL032H70-SBS1-0503UC (AZ5D: E2)
C3772 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V IC101 6-805-729-01 IC S29JL032H70-SBS1-0503CE
C3773 1-162-961-11 CERAMIC CHIP 330PF 10% 50V (AZ5D: E3, E12, E15, EA, AUS)
C3774 1-162-961-11 CERAMIC CHIP 330PF 10% 50V IC101 6-805-730-01 IC S29JL032H70-SBS1-0503GA
(AZ5D: SP, MY, TH)
C3781 1-162-977-11 CERAMIC CHIP 0.0018uF 10% 50V IC101 6-805-733-01 IC S29JL032H70-SBS2-0503UC (AZ2D: E2)
C3782 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V IC101 6-805-734-01 IC S29JL032H70-SBS2-0503CE
C3783 1-162-961-11 CERAMIC CHIP 330PF 10% 50V (AZ2D: E3, E12, E13, E15, EA, AUS)
C3801 1-126-206-11 ELECT CHIP 100uF 20% 6.3V IC101 6-805-735-01 IC S29JL032H70-SBS2-0503GA
(AZ2D: SP, MY, KR, PH)
C3802 1-117-370-11 CERAMIC CHIP 10uF 10V IC102 6-706-727-01 IC CXD9804R
C3803 1-126-209-11 ELECT CHIP 100uF 20% 4V IC103 (Not supplied) IC BR24L64F-WE2
C3804 1-126-205-11 ELECT CHIP 47uF 20% 6.3V IC104 6-706-390-11 IC HY57V641620HGTP-HDR
C3805 1-126-208-21 ELECT CHIP 47uF 20% 4V IC105 6-702-302-01 IC TK11133CSCL-G
< CONNECTOR > IC106 8-759-667-18 IC PQ018EZ01ZPH

IC107 6-702-302-01 IC TK11133CSCL-G
CN101 1-815-763-32 CONNECTOR, FFC/FPC 24P IC201 6-704-524-01 IC FAN8036L
CN103 1-784-365-21 CONNECTOR, FFC/FPC 5P IC301 6-704-222-01 IC AK4358VQ-L
* CN105 1-770-470-21 PIN, CONNECTOR (PC BOARD) 6P IC3601 6-707-608-01 IC PCM1803DBR (AZ5D)
CN106 1-793-989-21 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 13P
* CN201 1-770-470-21 PIN, CONNECTOR (PC BOARD) 6P IC3711 8-759-359-49 IC NJM3414AV (TE2)
IC3731 8-759-359-49 IC NJM3414AV (TE2) (AZ5D)
CN202 1-784-366-21 CONNECTOR, FFC/FPC 7P IC3751 8-759-359-49 IC NJM3414AV (TE2) (AZ5D)
CN301 1-793-989-21 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 13P IC3771 8-759-359-49 IC NJM3414AV (TE2)
CN302 1-778-691-11 CONNECTOR, FFC/FPC 19P (AZ5D)
CN302 1-784-376-11 CONNECTOR, FFC/FPC 17P (AZ2D) < COIL >
CN401 1-779-993-11 PIN, CONNECTOR (PWB) 5P
L3601 1-469-555-21 INDUCTOR 10uH (AZ5D)
< DIODE > L3602 1-469-555-21 INDUCTOR 10uH (AZ5D)
D1001 8-719-058-24 DIODE RB501V-40TE-17 < TRANSISTOR >

D3501 8-719-988-61 DIODE 1SS355TE-17
D3502 8-719-988-61 DIODE 1SS355TE-17 Q101 6-550-008-01 FET UM6K1N-TN
D3601 8-719-988-61 DIODE 1SS355TE-17 (AZ5D) Q102 6-550-653-01 TRANSISTOR QST8TR
D3602 8-719-988-61 DIODE 1SS355TE-17 (AZ5D) Q103 8-729-027-52 TRANSISTOR DTC124EKA-T146
Q2001 8-729-025-28 FET 2SK1828
< FERRITE BEAD > Q3801 8-729-230-49 TRANSISTOR 2SC2712-YG
FB111 1-414-226-21 INDUCTOR, FERRITE BEAD < RESISTOR >

FB112 1-414-226-21 INDUCTOR, FERRITE BEAD
FB113 1-414-226-21 INDUCTOR, FERRITE BEAD R101 1-216-809-11 METAL CHIP 100 5% 1/10W
FB114 1-414-226-21 INDUCTOR, FERRITE BEAD R103 1-216-833-11 METAL CHIP 10K 5% 1/10W
FB115 1-414-226-21 INDUCTOR, FERRITE BEAD R104 1-216-864-11 SHORT CHIP 0
R105 1-216-833-11 METAL CHIP 10K 5% 1/10W
FB401 1-469-324-21 FERRITE, EMI (SMD) (2012) R106 1-216-833-11 METAL CHIP 10K 5% 1/10W
FB402 1-469-324-21 FERRITE, EMI (SMD) (2012)
FB403 1-469-324-21 FERRITE, EMI (SMD) (2012) R107 1-216-833-11 METAL CHIP 10K 5% 1/10W
FB404 1-469-324-21 FERRITE, EMI (SMD) (2012) R108 1-216-857-11 METAL CHIP 1M 5% 1/10W
FB405 1-469-324-21 FERRITE, EMI (SMD) (2012) R109 1-216-864-11 SHORT CHIP 0
R110 1-216-841-11 METAL CHIP 47K 5% 1/10W
FB406 1-469-324-21 FERRITE, EMI (SMD) (2012) R111 1-216-809-11 METAL CHIP 100 5% 1/10W
< FILTER > R112 1-211-977-11 METAL CHIP 22 0.5% 1/10W

R113 1-211-977-11 METAL CHIP 22 0.5% 1/10W
FL101 1-234-177-21 FILTER, CHIP EMI R114 1-216-845-11 METAL CHIP 100K 5% 1/10W
FL104 1-234-177-21 FILTER, CHIP EMI R115 1-211-977-11 METAL CHIP 22 0.5% 1/10W
FL106 1-234-177-21 FILTER, CHIP EMI
R118 1-216-801-11 METAL CHIP 22 5% 1/10W
FL108 1-234-177-21 FILTER, CHIP EMI R120 1-216-801-11 METAL CHIP 22 5% 1/10W
FL401 1-234-177-21 FILTER, CHIP EMI R121 1-216-801-11 METAL CHIP 22 5% 1/10W
FL402 1-233-893-21 FILTER, CHIP EMI R123 1-216-864-11 SHORT CHIP 0
Therefore, if the mounted DMB10 board is replaced, exchange new
87
HCD-AZ2D/AZ5D
DMB10
R124 1-216-841-11 METAL CHIP 47K 5% 1/10W R236 1-216-821-11 METAL CHIP 1K 5% 1/10W
R126 1-216-864-11 SHORT CHIP 0 R237 1-216-821-11 METAL CHIP 1K 5% 1/10W
R127 1-216-809-11 METAL CHIP 100 5% 1/10W R238 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R133 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R134 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R239 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R243 1-216-809-11 METAL CHIP 100 5% 1/10W
R138 1-216-845-11 METAL CHIP 100K 5% 1/10W R314 1-216-809-11 METAL CHIP 100 5% 1/10W
R141 1-218-916-11 METAL CHIP 750K 0.5% 1/10W
R142 1-216-845-11 METAL CHIP 100K 5% 1/10W R319 1-216-864-11 SHORT CHIP 0
R321 1-216-864-11 SHORT CHIP 0
(AZ2D) R1102 1-218-827-11 METAL CHIP 150 0.5% 1/10W
R146 1-216-805-11 METAL CHIP 47 5% 1/10W
R151 1-216-805-11 METAL CHIP 47 5% 1/10W R1104 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1107 1-216-864-11 SHORT CHIP 0
R155 1-216-805-11 METAL CHIP 47 5% 1/10W R1109 1-216-864-11 SHORT CHIP 0
R160 1-216-805-11 METAL CHIP 47 5% 1/10W
R1121 1-216-864-11 SHORT CHIP 0
R187 1-216-864-11 SHORT CHIP 0 R1123 1-216-864-11 SHORT CHIP 0
R189 1-218-827-11 METAL CHIP 150 0.5% 1/10W
R190 1-218-827-11 METAL CHIP 150 0.5% 1/10W R1124 1-216-864-11 SHORT CHIP 0
R1126 1-216-833-11 METAL CHIP 10K 5% 1/10W
R192 1-218-827-11 METAL CHIP 150 0.5% 1/10W R1129 1-216-845-11 METAL CHIP 100K 5% 1/10W
R195 1-218-827-11 METAL CHIP 150 0.5% 1/10W
R197 1-218-827-11 METAL CHIP 150 0.5% 1/10W R1150 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R1151 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R206 1-216-833-11 METAL CHIP 10K 5% 1/10W
R207 1-216-826-11 METAL CHIP 2.7K 5% 1/10W R1168 1-216-817-11 METAL CHIP 470 5% 1/10W
R1503 1-216-864-11 SHORT CHIP 0
R212 1-216-833-11 METAL CHIP 10K 5% 1/10W
R213 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R1526 1-216-864-11 SHORT CHIP 0
R214 1-216-835-11 METAL CHIP 15K 5% 1/10W R1527 1-216-864-11 SHORT CHIP 0 (AZ5D)
R1530 1-216-864-11 SHORT CHIP 0
R216 1-216-834-11 METAL CHIP 12K 5% 1/10W R1540 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R219 1-216-838-11 METAL CHIP 27K 5% 1/10W
R221 1-218-889-11 METAL CHIP 56K 0.5% 1/10W R1543 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1545 1-216-864-11 SHORT CHIP 0
R223 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R1547 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R224 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1550 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R227 1-216-864-11 SHORT CHIP 0 R1551 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R230 1-218-893-11 METAL CHIP 82K 0.5% 1/10W (AZ2D)
R231 1-218-875-11 METAL CHIP 15K 0.5% 1/10W
R232 1-218-877-11 METAL CHIP 18K 0.5% 1/10W R1553 1-216-864-11 SHORT CHIP 0
R1554 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R233 1-218-883-11 METAL CHIP 33K 0.5% 1/10W R1557 1-216-809-11 METAL CHIP 100 5% 1/10W
88
HCD-AZ2D/AZ5D
DMB10
(AZ5D)
R3501 1-216-864-11 SHORT CHIP 0 (AZ2D) R3744 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
R3601 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D) R3745 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R3602 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D)
(AZ5D) (AZ5D)
R3605 1-216-864-11 SHORT CHIP 0 (AZ5D) R3747 1-216-821-11 METAL CHIP 1K 5% 1/10W
(AZ5D)
R3606 1-216-864-11 SHORT CHIP 0 (AZ5D) R3748 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R3607 1-216-864-11 SHORT CHIP 0 (AZ5D) (AZ5D)
R3611 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
R3621 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D)
R3752 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R3651 1-216-864-11 SHORT CHIP 0 (AZ5D)
R3652 1-216-864-11 SHORT CHIP 0 R3753 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
R3653 1-216-864-11 SHORT CHIP 0 (AZ5D)
R3712 1-216-823-11 METAL CHIP 1.5K 5% 1/10W (AZ5D)
R3755 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R3714 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R3756 1-216-821-11 METAL CHIP 1K 5% 1/10W
R3716 1-216-821-11 METAL CHIP 1K 5% 1/10W
(AZ5D)
R3719 1-216-821-11 METAL CHIP 1K 5% 1/10W (AZ5D)
(AZ5D)
R3726 1-216-821-11 METAL CHIP 1K 5% 1/10W
R3764 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
R3734 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D)
(AZ5D) R3777 1-216-821-11 METAL CHIP 1K 5% 1/10W
R3778 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R3741 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R3783 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
89
HCD-AZ2D/AZ5D
DMB10 EJECT FL
R3784 1-216-828-11 METAL CHIP 3.9K 5% 1/10W C1003 1-162-974-11 CERAMIC CHIP 0.01uF 50V
C1004 1-119-943-11 ELECT 47uF 20% 50V
R3785 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C1005 1-162-974-11 CERAMIC CHIP 0.01uF 50V
R3786 1-216-821-11 METAL CHIP 1K 5% 1/10W
R3787 1-216-821-11 METAL CHIP 1K 5% 1/10W C1006 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R3788 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C1007 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R3789 1-216-821-11 METAL CHIP 1K 5% 1/10W C1008 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R3801 1-216-864-11 SHORT CHIP 0 C1010 1-162-922-11 CERAMIC CHIP 39PF 5% 50V
R3802 1-216-864-11 SHORT CHIP 0
R3803 1-216-833-11 METAL CHIP 10K 5% 1/10W C1011 1-126-964-11 ELECT 10uF 20% 50V
R3805 1-216-821-11 METAL CHIP 1K 5% 1/10W C1013 1-162-974-11 CERAMIC CHIP 0.01uF 50V
C1014 1-162-974-11 CERAMIC CHIP 0.01uF 50V
R4701 1-216-864-11 SHORT CHIP 0
R4702 1-216-864-11 SHORT CHIP 0 < CONNECTOR >
R4703 1-216-864-11 SHORT CHIP 0
R4704 1-216-864-11 SHORT CHIP 0 CN1001 1-784-735-11 CONNECTOR, FFC 13P
R4705 1-216-864-11 SHORT CHIP 0
< DIODE >
R4706 1-216-864-11 SHORT CHIP 0
R5008 1-216-864-11 SHORT CHIP 0 (AZ2D) D1001 8-719-988-61 DIODE 1SS355TE-17
R5009 1-216-864-11 SHORT CHIP 0 (AZ5D) D1002 8-719-988-61 DIODE 1SS355TE-17
R5010 1-216-864-11 SHORT CHIP 0 D1003 8-719-988-61 DIODE 1SS355TE-17
R5014 1-216-864-11 SHORT CHIP 0 (AZ2D: E2/AZ5D: E2) D1004 8-719-988-61 DIODE 1SS355TE-17
D1005 8-719-083-58 DIODE UDZSTE-173.9B
R5016 1-216-864-11 SHORT CHIP 0
(AZ2D: E3, E12, E13, E15, EA, AUS/AZ5D: E3, E12, E15, EA, AUS) D1006 6-500-809-01 LED SELU5223C-STP15 (BACK LIGHT)
R5017 1-216-864-11 SHORT CHIP 0 D1007 6-500-809-01 LED SELU5223C-STP15 (BACK LIGHT)
(AZ2D: SP, MY, KR, PH/AZ5D: SP, MY, TH) D1008 6-500-809-01 LED SELU5223C-STP15 (BACK LIGHT)
D1009 6-500-809-01 LED SELU5223C-STP15 (BACK LIGHT)
< COMPOSITION CIRCUIT BLOCK > D1010 6-500-809-01 LED SELU5223C-STP15 (BACK LIGHT)
RB103 1-234-795-21 RES, NETWORK 0X4 (2010) < FLUORESCENT INDICATOR >
RB104 1-234-795-21 RES, NETWORK 0X4 (2010)
RB105 1-234-371-21 RES, NETWORK 47 (1005X4) FL1001 1-519-789-11 INDICATOR TUBE, FLUORESCENT
RB106 1-234-371-21 RES, NETWORK 47 (1005X4)
RB107 1-234-370-21 RES, NETWORK 22 (1005X4) < IC >
RB108 1-234-370-21 RES, NETWORK 22 (1005X4) 22 (1005X4) IC1001 6-705-899-01 IC ML9208-03MBZ03B

RB111 1-234-795-21 RES, NETWORK 0X4 (2010)
RB112 1-234-370-21 RES, NETWORK 22 (1005X4) 22 (1005X4) < COIL >
RB113 1-234-370-21 RES, NETWORK 22 (1005X4) 22 (1005X4)
L1001 1-410-671-31 INDUCTOR 47uH
< VIBRATOR >
< TRANSISTOR >
X101 1-781-867-21 VIBRATOR, CRYSTAL (27MHz)
************************************************************* Q1001 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q1002 8-729-027-43 TRANSISTOR DTC114EKA-T146
EJECT BOARD Q1003 8-729-120-28 TRANSISTOR 2SC1623-L5L6
*********** Q1004 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q1005 6-550-065-01 TRANSISTOR CPH5504-TL-E
< RESISTOR >
< RESISTOR >
R1039 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1001 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
< SWITCH > R1002 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1003 1-216-809-11 METAL CHIP 100 5% 1/10W
S1041 1-762-875-21 SWITCH, KEYBOARD (Z) R1004 1-216-809-11 METAL CHIP 100 5% 1/10W
************************************************************* R1006 1-216-837-11 METAL CHIP 22K 5% 1/10W
A-1091-269-A FL BOARD, COMPLETE (EXCEPT AZ5D: TH) R1007 1-216-837-11 METAL CHIP 22K 5% 1/10W
A-1114-866-A FL BOARD, COMPLETE (AZ5D: TH) R1008 1-216-821-11 METAL CHIP 1K 5% 1/10W
******** R1009 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1010 1-216-821-11 METAL CHIP 1K 5% 1/10W
< CAPACITOR > R1011 1-216-821-11 METAL CHIP 1K 5% 1/10W
C1001 1-126-514-11 ELECT 22uF 20% 16V R1012 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
C1002 1-107-727-61 CERAMIC CHIP 0.022uF 10% 16V R1013 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
90
HCD-AZ2D/AZ5D
FL KEY MAIN
R1014 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R1015 1-216-823-11 METAL CHIP 1.5K 5% 1/10W A-1114-671-A MAIN BOARD, COMPLETE (AZ2D: PH)
R1016 1-216-823-11 METAL CHIP 1.5K 5% 1/10W A-1114-680-A MAIN BOARD, COMPLETE (AZ2D: E15)
A-1114-696-A MAIN BOARD, COMPLETE (AZ2D: E3)
R1019 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
A-1114-860-A MAIN BOARD, COMPLETE (AZ5D: TH)
R1022 1-216-823-11 METAL CHIP 1.5K 5% 1/10W **********
R1023 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1024 1-216-833-11 METAL CHIP 10K 5% 1/10W 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
< TRANSFORMER > < CAPACITOR >
T1001 1-443-576-11 TRANSFORMER, DC/DC CONVERTER C1 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
************************************************************* C2 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
C3 1-115-156-11 CERAMIC CHIP 1uF 10V
KEY BOARD C4 1-126-964-11 ELECT 10uF 20% 50V
********* C10 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< CONNECTOR > C11 1-162-921-11 CERAMIC CHIP 33PF 5% 50V

CN1030 1-784-727-11 CONNECTOR, FFC 5P C13 1-115-156-11 CERAMIC CHIP 1uF 10V
C14 1-126-947-11 ELECT 47uF 20% 35V
< LED > C15 1-126-947-11 ELECT 47uF 20% 35V
D1030 8-719-071-44 LED SELS5223C-TP15 (STANDBY) C16 1-115-156-11 CERAMIC CHIP 1uF 10V
< RESISTOR > C18 1-115-156-11 CERAMIC CHIP 1uF 10V
C19 1-126-963-11 ELECT 4.7uF 20% 50V
R1030 1-216-821-11 METAL CHIP 1K 5% 1/10W C20 1-126-963-11 ELECT 4.7uF 20% 50V
R1031 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1032 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C29 1-126-964-11 ELECT 10uF 20% 50V
C32 1-124-261-00 ELECT 10uF 20% 50V
R1037 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(AZ5D)
< SWITCH > C35 1-126-964-11 ELECT 10uF 20% 50V
(AZ5D)
S1030 1-762-875-21 SWITCH, KEYBOARD (?/1) C36 1-126-964-11 ELECT 10uF 20% 50V
S1031 1-762-875-21 SWITCH, KEYBOARD (DIMMER) (AZ5D)
S1032 1-762-875-21 SWITCH, KEYBOARD (PROGRESSIVE) C51 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
S1033 1-762-875-21 SWITCH, KEYBOARD (DSGX) C52 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
S1034 1-762-875-21 SWITCH, KEYBOARD (SOUND FILED)
S1035 1-762-875-21 SWITCH, KEYBOARD (DISPLAY) C54 1-126-964-11 ELECT 10uF 20% 50V
S1036 1-762-875-21 SWITCH, KEYBOARD (EQ SELECT) C70 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
S1037 1-762-875-21 SWITCH, KEYBOARD (DIRECTION) C72 1-126-964-11 ELECT 10uF 20% 50V
S1038 1-762-875-21 SWITCH, KEYBOARD (CD SYNC) C73 1-126-963-11 ELECT 4.7uF 20% 50V
S1039 1-762-875-21 SWITCH, KEYBOARD (z START)
************************************************************* C74 1-126-963-11 ELECT 4.7uF 20% 50V
C75 1-126-964-11 ELECT 10uF 20% 50V
A-1091-182-A MAIN BOARD, COMPLETE (AZ2D: SP, MY) C77 1-126-935-11 ELECT 470uF 20% 16V
A-1091-183-A MAIN BOARD, COMPLETE (AZ2D: E2) C79 1-126-964-11 ELECT 10uF 20% 50V
A-1091-185-A MAIN BOARD, COMPLETE (AZ5D: SP, MY)
C87 1-126-935-11 ELECT 470uF 20% 16V
A-1092-100-A MAIN BOARD, COMPLETE (AZ2D: AUS) C89 1-126-964-11 ELECT 10uF 20% 50V
A-1092-101-A MAIN BOARD, COMPLETE (AZ2D: EA) C90 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
A-1092-102-A MAIN BOARD, COMPLETE (AZ2D: KR) C93 1-126-926-11 ELECT 1000uF 20% 10V
A-1092-103-A MAIN BOARD, COMPLETE (AZ5D: AUS)
A-1092-104-A MAIN BOARD, COMPLETE (AZ5D: EA) C94 1-126-964-11 ELECT 10uF 20% 50V
91
HCD-AZ2D/AZ5D
MAIN
C100 1-164-156-11 CERAMIC CHIP 0.1uF 25V C164 1-137-193-11 FILM 0.39uF 5% 50V
C101 1-126-964-11 ELECT 10uF 20% 50V C165 1-126-964-11 ELECT 10uF 20% 50V
C102 1-126-964-11 ELECT 10uF 20% 50V
C167 1-126-960-11 ELECT 1uF 20% 50V
C104 1-126-964-11 ELECT 10uF 20% 50V C168 1-137-150-11 FILM 0.01uF 5% 100V
C105 1-136-497-81 FILM 0.1uF 5% 50V C169 1-126-947-11 ELECT 47uF 20% 35V
C106 1-126-964-11 ELECT 10uF 20% 50V C171 1-126-963-11 ELECT 4.7uF 20% 50V
C108 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C172 1-126-963-11 ELECT 4.7uF 20% 50V
C109 1-126-964-11 ELECT 10uF 20% 50V C174 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C110 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V C176 1-126-964-11 ELECT 10uF 20% 50V
C112 1-126-964-11 ELECT 10uF 20% 50V C177 1-137-194-81 FILM 0.47uF 5% 50V
C113 1-137-194-81 FILM 0.47uF 5% 50V (AZ5D)
C114 1-137-193-11 FILM 0.39uF 5% 50V C178 1-136-169-00 FILM 0.22uF 5% 50V
C115 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
C117 1-126-960-11 ELECT 1uF 20% 50V (AZ5D)
C118 1-137-150-11 FILM 0.01uF 5% 100V C183 1-126-961-11 ELECT 2.2uF 20% 50V
C189 1-126-964-11 ELECT 10uF 20% 50V
C121 1-136-177-00 FILM 1uF 5% 50V
C122 1-126-963-11 ELECT 4.7uF 20% 50V C192 1-126-964-11 ELECT 10uF 20% 50V
C123 1-163-077-00 CERAMIC CHIP 0.1uF 50V C193 1-162-960-11 CERAMIC CHIP 220PF 10% 50V
C126 1-104-665-11 ELECT 100uF 20% 25V
C128 1-126-964-11 ELECT 10uF 20% 50V C200 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C129 1-137-194-81 FILM 0.47uF 5% 50V C201 1-126-964-11 ELECT 10uF 20% 50V
(AZ5D)
C130 1-137-374-11 MYLAR 0.047uF 5% 50V C202 1-126-964-11 ELECT 10uF 20% 50V
(AZ2D) (AZ5D)
C132 1-137-150-11 FILM 0.01uF 5% 100V (AZ5D)
C133 1-137-150-11 FILM 0.01uF 5% 100V
(AZ5D)
C139 1-126-964-11 ELECT 10uF 20% 50V (AZ2D)
C251 1-126-964-11 ELECT 10uF 20% 50V
C144 1-126-964-11 ELECT 10uF 20% 50V
(AZ5D)
C150 1-163-077-00 CERAMIC CHIP 0.1uF 50V C254 1-126-964-11 ELECT 10uF 20% 50V
C151 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
C152 1-126-964-11 ELECT 10uF 20% 50V C260 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C154 1-126-964-11 ELECT 10uF 20% 50V (AZ5D: EA, AUS)
C155 1-136-497-81 FILM 0.1uF 5% 50V C262 1-164-156-11 CERAMIC CHIP 0.1uF 25V
(AZ5D)
C156 1-126-964-11 ELECT 10uF 20% 50V
C157 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C264 1-126-963-11 ELECT 4.7uF 20% 50V
C159 1-126-964-11 ELECT 10uF 20% 50V C265 1-126-963-11 ELECT 4.7uF 20% 50V
C266 1-126-964-11 ELECT 10uF 20% 50V
C163 1-137-194-81 FILM 0.47uF 5% 50V
92
HCD-AZ2D/AZ5D
MAIN
C271 1-126-964-11 ELECT 10uF 20% 50V
(AZ5D) C956 1-104-665-11 ELECT 100uF 20% 25V
(AZ5D)
C958 1-126-926-11 ELECT 1000uF 20% 10V
(AZ5D) C980 1-126-937-11 ELECT 4700uF 20% 16V
(AZ5D) C982 1-126-963-11 ELECT 4.7uF 20% 50V
C301 1-162-961-11 CERAMIC CHIP 330PF 10% 50V C983 1-126-965-11 ELECT 22uF 20% 50V
C990 1-126-916-11 ELECT 1000uF 20% 6.3V
C303 1-162-961-11 CERAMIC CHIP 330PF 10% 50V C991 1-126-960-11 ELECT 1uF 20% 50V
C304 1-126-964-11 ELECT 10uF 20% 50V C992 1-126-916-11 ELECT 1000uF 20% 6.3V
C306 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C999 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< CONNECTOR >
C310 1-126-965-11 ELECT 22uF 20% 50V CN1 1-815-194-11 CONNECTOR, USB (B) (PC)
C311 1-130-481-00 MYLAR 0.0068uF 5% 50V CN100 1-564-505-11 PLUG, CONNECTOR 2P
C312 1-137-150-11 FILM 0.01uF 5% 100V CN101 1-784-780-11 CONNECTOR, FFC 19P (AZ2D)
C313 1-124-589-11 ELECT 47uF 20% 16V CN101 1-568-838-11 CONNECTOR FFC 21P (AZ5D)
CN102 1-568-826-11 CONNECTOR FFC 7P (AZ5D)
C314 1-137-150-11 FILM 0.01uF 5% 100V
C315 1-136-287-11 FILM 0.0047uF 5% 100V CN103 1-785-320-11 PIN, CONNECTOR (STRAIGHT) 8P
C322 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V CN111 1-779-279-11 CONNECTOR, FFC (LIF (NON-ZIF)) 11P
C324 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V CN112 1-784-766-11 CONNECTOR, FFC 5P
C340 1-164-156-11 CERAMIC CHIP 0.1uF 25V CN113 1-784-774-11 CONNECTOR, FFC 13P
CN201 1-794-483-11 CONNECTOR, FFC (LIF (NON-ZIF)) 19P (AZ5D)
C352 1-126-964-11 ELECT 10uF 20% 50V CN202 1-815-620-11 CONNECTOR, FFC (LIF (NON-ZIF)) 17P (AZ2D)
C353 1-162-961-11 CERAMIC CHIP 330PF 10% 50V CN203 1-779-281-11 CONNECTOR, FFC (LIF (NON-ZIF)) 13P
C354 1-126-964-11 ELECT 10uF 20% 50V CN206 1-568-828-11 CONNECTOR FFC 9P
C355 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V * CN301 1-564-719-11 PIN, CONNECTOR (SMALL TYPE) 3P
* CN302 1-564-724-11 PIN, CONNECTOR (SMALL TYPE) 8P
C357 1-162-961-11 CERAMIC CHIP 330PF 10% 50V CN303 1-568-826-11 CONNECTOR FFC 7P
C358 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V CN304 1-691-040-31 CONNECTOR FFC 8P
C361 1-126-163-11 ELECT 4.7uF 20% 50V CN401 1-785-316-11 PIN, CONNECTOR (STRAIGHT) 4P
C362 1-126-163-11 ELECT 4.7uF 20% 50V CN951 1-691-770-11 PLUG (MICRO CONNECTOR) 8P
CN952 1-691-765-11 PLUG (MICRO CONNECTOR) 3P
C363 1-126-163-11 ELECT 4.7uF 20% 50V
C364 1-126-163-11 ELECT 4.7uF 20% 50V CN954 1-564-506-11 PLUG, CONNECTOR 3P
C390 1-126-965-11 ELECT 22uF 20% 50V CN955 1-564-704-11 PIN, CONNECTOR (SMALL TYPE) 2P (AZ5D)
C391 1-136-497-11 FILM 0.1uF 5% 50V
C392 1-136-497-11 FILM 0.1uF 5% 50V < DIODE >
C393 1-126-964-11 ELECT 10uF 20% 50V D1 8-719-988-61 DIODE 1SS355TE-17

C400 1-164-156-11 CERAMIC CHIP 0.1uF 25V D72 8-719-988-61 DIODE 1SS355TE-17
C410 1-162-918-11 CERAMIC CHIP 18PF 5% 50V D181 8-719-988-61 DIODE 1SS355TE-17
C411 1-162-918-11 CERAMIC CHIP 18PF 5% 50V D182 8-719-988-61 DIODE 1SS355TE-17
C417 1-126-917-11 ELECT 3300uF 20% 6.3V D262 8-719-988-61 DIODE 1SS355TE-17
93
HCD-AZ2D/AZ5D
MAIN
D396 8-719-988-61 DIODE 1SS355TE-17 JR120 1-216-296-11 SHORT CHIP 0


D953 6-500-522-21 DIODE 10EDB40-TB3 JR130 1-216-296-11 SHORT CHIP 0
D954 6-500-522-21 DIODE 10EDB40-TB3 JR131 1-216-864-11 SHORT CHIP 0
D955 6-500-522-21 DIODE 10EDB40-TB3 (AZ2D) JR132 1-216-296-11 SHORT CHIP 0
D981 8-719-988-61 DIODE 1SS355TE-17
< COIL >
D982 8-719-069-56 DIODE UDZSTE-176.2B
D983 8-719-978-33 DIODE DTZ-TT11-6.8B L1 1-412-064-11 INDUCTOR 100uH
D984 8-719-988-61 DIODE 1SS355TE-17 L231 1-412-064-11 INDUCTOR 100uH (AZ2D)
L241 1-412-064-11 INDUCTOR 100uH
< EARTH TERMINAL > L301 1-410-780-11 INDUCTOR 27mH
L311 1-414-189-31 INDUCTOR 100uH
EP901 1-537-738-21 TERMINAL, GROUND
EP902 1-537-738-21 TERMINAL, GROUND L351 1-410-780-11 INDUCTOR 27mH
< JUMPER RESISTOR > < TRANSISTOR >
FB30 1-216-864-11 SHORT CHIP 0 Q1 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

FB34 1-216-864-11 SHORT CHIP 0 Q11 8-729-027-23 TRANSISTOR DTA114EKA-T146
FB50 1-216-864-11 SHORT CHIP 0 Q12 8-729-027-59 TRANSISTOR DTC144EKA-T146

FB101 1-216-864-11 SHORT CHIP 0 Q31 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
FB201 1-216-864-11 SHORT CHIP 0 (AZ2D) Q32 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
Q33 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D)
< IC > Q34 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D)
IC1 6-705-055-01 IC PCM2704DBR Q35 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D)

IC3 8-759-359-49 IC NJM3414AV (TE2) Q36 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D)
IC101 6-705-667-01 IC M61537FP-RF0G Q51 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC231 8-749-019-25 IC TOTX141 (DVD DIGITAL OUT ) (AZ2D) Q71 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC261 8-759-677-02 IC BU4053BCF-E2 (AZ5D) Q73 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC391 6-707-920-01 IC BD4828G-TR Q81 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

IC401 6-805-076-01 IC M30622MEP-A06FPU0 Q82 8-729-142-48 TRANSISTOR 2SD1616-TP-LK
IC951 6-703-550-01 IC TA7809LS Q83 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC952 6-703-550-01 IC TA7809LS Q101 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC953 6-703-546-01 IC TA7804LS Q103 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC954 8-759-653-07 IC PQ09RD21J00H Q104 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

IC955 6-707-921-01 IC PQ3RD13 Q140 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
IC956 8-759-471-81 IC PQ05RD11J00H Q141 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
Q151 8-729-120-28 TRANSISTOR 2SC1623-L5L6
< JACK > Q153 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
J101 1-794-212-11 JACK, PIN 4P (VIDEO SAT IN, VIDEO SAT OUT) Q154 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
Q171 8-729-027-23 TRANSISTOR DTA114EKA-T146
< CAPACITOR/JUMPER RESISTOR > Q191 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
JR1 1-163-077-00 CERAMIC CHIP 0.1uF 50V Q251 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D)
JR105 1-216-864-11 SHORT CHIP 0
JR108 1-216-296-11 SHORT CHIP 0 Q260 8-729-027-43 TRANSISTOR DTC114EKA-T146 (AZ5D)
JR109 1-216-296-11 SHORT CHIP 0 Q261 8-729-027-43 TRANSISTOR DTC114EKA-T146 (AZ5D)
JR110 1-216-296-11 SHORT CHIP 0 Q262 8-729-027-23 TRANSISTOR DTA114EKA-T146 (AZ5D)
JR111 1-216-296-11 SHORT CHIP 0 Q270 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
JR112 1-216-296-11 SHORT CHIP 0
94
HCD-AZ2D/AZ5D
MAIN
Q275 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D) R22 1-216-845-11 METAL CHIP 100K 5% 1/10W
R23 1-216-837-11 METAL CHIP 22K 5% 1/10W
Q276 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D) R27 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
Q277 6-550-889-01 TRANSISTOR 2SC5938-T112-1B (AZ5D) R28 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q301 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16 R29 1-216-837-11 METAL CHIP 22K 5% 1/10W
Q302 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16
Q303 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16 R31 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R32 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q311 8-729-600-22 TRANSISTOR 2SA1235-F R33 1-216-821-11 METAL CHIP 1K 5% 1/10W
Q312 8-729-027-43 TRANSISTOR DTC114EKA-T146 R34 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q313 8-729-027-43 TRANSISTOR DTC114EKA-T146 R35 1-216-845-11 METAL CHIP 100K 5% 1/10W
R37 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q316 8-729-027-43 TRANSISTOR DTC114EKA-T146 (AZ5D)
Q317 8-729-040-20 TRANSISTOR RT1P137L-TP R38 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q318 8-729-011-92 TRANSISTOR 2SC2001TP-K1K2 (AZ5D)
Q322 8-729-140-04 TRANSISTOR 2SB1116A-L (AZ5D)
R40 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q324 8-729-140-04 TRANSISTOR 2SB1116A-L
Q327 8-729-140-04 TRANSISTOR 2SB1116A-L (AZ5D)
(AZ5D)
Q329 8-729-140-04 TRANSISTOR 2SB1116A-L R43 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q341 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (AZ5D)
Q351 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16 R45 1-216-821-11 METAL CHIP 1K 5% 1/10W
(AZ5D)
Q352 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16
Q353 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16 R46 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q361 8-729-027-23 TRANSISTOR DTA114EKA-T146 (AZ5D)
Q362 8-729-027-23 TRANSISTOR DTA114EKA-T146 R47 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q363 8-729-027-23 TRANSISTOR DTA114EKA-T146 (AZ5D)
R48 1-216-821-11 METAL CHIP 1K 5% 1/10W
Q391 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (AZ5D)
Q464 8-729-025-28 FET 2SK1828 R50 1-216-841-11 METAL CHIP 47K 5% 1/10W
Q465 8-729-027-43 TRANSISTOR DTC114EKA-T146 R51 1-216-801-11 METAL CHIP 22 5% 1/10W
Q952 8-729-027-43 TRANSISTOR DTC114EKA-T146 R53 1-216-813-11 METAL CHIP 220 5% 1/10W
R54 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q981 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R56 1-216-821-11 METAL CHIP 1K 5% 1/10W
Q982 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R57 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q983 8-729-026-68 TRANSISTOR 2SD2525 (TP) R58 1-216-833-11 METAL CHIP 10K 5% 1/10W
R59 1-216-833-11 METAL CHIP 10K 5% 1/10W
< RESISTOR > R60 1-216-841-11 METAL CHIP 47K 5% 1/10W
R61 1-216-166-00 RES-CHIP 47 5% 1/8W
R1 1-216-801-11 METAL CHIP 22 5% 1/10W R71 1-216-166-00 RES-CHIP 47 5% 1/8W
R4 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R75 1-216-833-11 METAL CHIP 10K 5% 1/10W
R8 1-216-270-00 RES-CHIP 1M 5% 1/8W R76 1-216-843-11 METAL CHIP 68K 5% 1/10W
R10 1-216-801-11 METAL CHIP 22 5% 1/10W
R16 1-216-166-00 RES-CHIP 47 5% 1/8W R80 1-216-821-11 METAL CHIP 1K 5% 1/10W
R81 1-216-166-00 RES-CHIP 47 5% 1/8W
R17 1-216-166-00 RES-CHIP 47 5% 1/8W R82 1-216-845-11 METAL CHIP 100K 5% 1/10W
R19 1-216-845-11 METAL CHIP 100K 5% 1/10W
R20 1-216-857-11 METAL CHIP 1M 5% 1/10W R84 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
95
HCD-AZ2D/AZ5D
MAIN
R87 1-216-845-11 METAL CHIP 100K 5% 1/10W
R168 1-216-821-11 METAL CHIP 1K 5% 1/10W
R91 1-216-166-00 RES-CHIP 47 5% 1/8W R171 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R93 1-216-821-11 METAL CHIP 1K 5% 1/10W
R174 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R104 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R186 1-216-864-11 SHORT CHIP 0

R121 1-216-861-11 METAL CHIP 2.2M 5% 1/10W (AZ5D)
(AZ5D)
R123 1-216-857-11 METAL CHIP 1M 5% 1/10W R204 1-216-841-11 METAL CHIP 47K 5% 1/10W
R127 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R234 1-216-841-11 METAL CHIP 47K 5% 1/10W
R130 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
R141 1-216-821-11 METAL CHIP 1K 5% 1/10W (AZ2D: E2/AZ5D: E2)
R245 1-216-864-11 SHORT CHIP 0
R142 1-216-845-11 METAL CHIP 100K 5% 1/10W (EXCEPT AZ2D: E2/AZ5D: E2)
R143 1-216-864-11 SHORT CHIP 0
R145 1-216-821-11 METAL CHIP 1K 5% 1/10W (AZ2D: E2/AZ5D: E2)
(AZ5D)
(AZ5D)
R154 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R261 1-216-833-11 METAL CHIP 10K 5% 1/10W
R162 1-216-835-11 METAL CHIP 15K 5% 1/10W
96
HCD-AZ2D/AZ5D
MAIN
R315 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R264 1-216-837-11 METAL CHIP 22K 5% 1/10W
(AZ5D) R316 1-216-797-11 METAL CHIP 10 5% 1/10W
R284 1-216-821-11 METAL CHIP 1K 5% 1/10W
R351 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(AZ5D)
(AZ5D)
R362 1-216-845-11 METAL CHIP 100K 5% 1/10W
R292 1-216-845-11 METAL CHIP 100K 5% 1/10W
(AZ2D: E2/AZ5D: E2) R369 1-216-837-11 METAL CHIP 22K 5% 1/10W
R295 1-216-864-11 SHORT CHIP 0
(EXCEPT AZ2D: E2/AZ5D: E2) R371 1-216-833-11 METAL CHIP 10K 5% 1/10W
R372 1-216-833-11 METAL CHIP 10K 5% 1/10W
(AZ2D: E2/AZ5D: E2) R374 1-216-833-11 METAL CHIP 10K 5% 1/10W
R302 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R378 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R307 1-216-833-11 METAL CHIP 10K 5% 1/10W
R392 1-216-837-11 METAL CHIP 22K 5% 1/10W
97
HCD-AZ2D/AZ5D
MAIN
R465 1-216-821-11 METAL CHIP 1K 5% 1/10W
R400 1-216-809-11 METAL CHIP 100 5% 1/10W R472 1-216-815-11 METAL CHIP 330 5% 1/10W
R401 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ2D: E3, E15/AZ5D: E3, E15)
(AZ2D: E12/AZ5D: E12)
R403 1-216-857-11 METAL CHIP 1M 5% 1/10W
R405 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ2D: EA/AZ5D: EA)
R407 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ2D: AUS/AZ5D: AUS)
R472 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R408 1-216-833-11 METAL CHIP 10K 5% 1/10W (AZ2D: E2, E13, KR/AZ5D: E2)
R411 1-216-851-11 METAL CHIP 330K 5% 1/10W (AZ2D: SP, MY, PH/AZ5D: SP, MY, TH)
R413 1-216-864-11 SHORT CHIP 0 R473 1-216-811-11 METAL CHIP 150 5% 1/10W
R431 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ2D: E13)
(AZ2D: E2/AZ5D: E2)
R434 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ2D: KR)
R435 1-216-809-11 METAL CHIP 100 5% 1/10W
R437 1-216-809-11 METAL CHIP 100 5% 1/10W (EXCEPT AZ2D: E2, E13, KR/AZ5D: E2)
R493 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R441 1-216-809-11 METAL CHIP 100 5% 1/10W
R498 1-216-797-11 METAL CHIP 10 5% 1/10W
R447 1-216-857-11 METAL CHIP 1M 5% 1/10W
R984 1-216-849-11 METAL CHIP 220K 5% 1/10W
R454 1-216-809-11 METAL CHIP 100 5% 1/10W
R455 1-216-809-11 METAL CHIP 100 5% 1/10W < TRANSFORMER >
R457 1-216-809-11 METAL CHIP 100 5% 1/10W
R458 1-216-809-11 METAL CHIP 100 5% 1/10W T301 1-433-372-11 TRANSFORMER, BIAS OSCILLATION
R459 1-216-809-11 METAL CHIP 100 5% 1/10W < VIBRATOR >

(AZ5D)
R460 1-216-809-11 METAL CHIP 100 5% 1/10W X11 1-767-925-11 VIBRATOR, CRYSTAL (12MHz)
(AZ5D) X401 1-760-252-12 VIBRATOR, CRYSTAL (32.768kHz)
R462 1-216-833-11 METAL CHIP 10K 5% 1/10W X402 1-760-489-11 VIBRATOR, CERAMIC (5MHz)
R463 1-216-809-11 METAL CHIP 100 5% 1/10W *************************************************************
R464 1-216-809-11 METAL CHIP 100 5% 1/10W
98
HCD-AZ2D/AZ5D
MIC MS-214
A-1091-273-A MIC BOARD, COMPLETE (EXCEPT AZ5D: TH)
A-1114-870-A MIC BOARD, COMPLETE (AZ5D: TH) < JUMPER RESISTOR/CAPACITOR >
*********
JR1051 1-216-296-11 SHORT CHIP 0
< CAPACITOR > JR1053 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C1053 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V < RESISTOR >
C1060 1-115-868-11 ELECT 0.22uF 20% 50V
C1061 1-162-974-11 CERAMIC CHIP 0.01uF 50V R1050 1-500-329-21 INDUCTOR, FERRITE BEAD
C1062 1-115-868-11 ELECT 0.22uF 20% 50V R1051 1-500-329-21 INDUCTOR, FERRITE BEAD
C1063 1-162-974-11 CERAMIC CHIP 0.01uF 50V R1052 1-216-864-11 SHORT CHIP 0
R1060 1-216-821-11 METAL CHIP 1K 5% 1/10W
C1064 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V R1061 1-216-833-11 METAL CHIP 10K 5% 1/10W
C1067 1-164-816-11 CERAMIC CHIP 220PF 2% 50V R1062 1-216-821-11 METAL CHIP 1K 5% 1/10W
C1068 1-115-868-11 ELECT 0.22uF 20% 50V R1063 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1065 1-216-821-11 METAL CHIP 1K 5% 1/10W
C1070 1-162-927-11 CERAMIC CHIP 100PF 5% 50V R1066 1-216-841-11 METAL CHIP 47K 5% 1/10W
C1072 1-126-791-11 ELECT 10uF 20% 35V R1067 1-216-809-11 METAL CHIP 100 5% 1/10W
C1074 1-126-176-11 ELECT 220uF 20% 10V R1069 1-216-847-11 METAL CHIP 150K 5% 1/10W
R1070 1-216-809-11 METAL CHIP 100 5% 1/10W
C1078 1-115-872-11 ELECT 2.2uF 20% 50V
C1082 1-126-786-11 ELECT 47uF 20% 16V R1074 1-216-864-11 SHORT CHIP 0
R1075 1-216-833-11 METAL CHIP 10K 5% 1/10W
C1087 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V R1079 1-216-813-11 METAL CHIP 220 5% 1/10W
R1080 1-216-846-11 METAL CHIP 120K 5% 1/10W
R1085 1-216-837-11 METAL CHIP 22K 5% 1/10W
C1098 1-164-156-11 CERAMIC CHIP 0.1uF 25V < VARIABLE RESISTOR >
< CONNECTOR > RV1060 1-223-983-11 RES, VAR, CARBON 50K (MIC LEVEL)
RV1061 1-223-983-11 RES, VAR, CARBON 50K (ECHO LEVEL)
CN1050 1-785-334-11 PIN, CONNECTOR (LIGHT ANGLE) 8P *************************************************************
< DIODE > MS-214 BOARD

*************
D1061 8-719-069-54 DIODE UDZSTE-175.1B
< CONNECTOR >
< EARTH TERMINAL >
CN001 1-815-569-11 CONNECTOR, FFC/FPC 7P
EP1050 1-537-738-21 TERMINAL, GROUND
EP1060 1-537-738-21 TERMINAL, GROUND < SWITCH >
< IC > S001 1-762-951-13 SWITCH, PUSH (DISC IN/OUT)

S002 1-762-951-13 SWITCH, PUSH (CHUCKING)
IC1060 8-759-710-97 IC NJM4565M-D S003 1-762-951-13 SWITCH, PUSH (TRIGGER)
IC1061 8-759-496-41 IC M65850FP-E1 ************************************************************
< JACK >
J1050 1-750-032-11 JACK (DIA. 3.5) (PHONES)

J1060 1-770-226-11 JACK (LARGE TYPE) (MIC 1)
J1061 1-770-226-11 JACK (LARGE TYPE) (MIC 2)
99
HCD-AZ2D/AZ5D
SIRCS S-MASTER
SIRCS BOARD C525 1-124-247-11 ELECT 10uF 20% 35V
*********** C526 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< CAPACITOR >
C528 1-104-665-11 ELECT 100uF 20% 25V
C1040 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V C529 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< IC > C531 1-126-964-11 ELECT 10uF 20% 50V
C532 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
IC1040 6-600-349-11 IC NJL22H400A
C533 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
< RESISTOR > C534 1-126-163-11 ELECT 4.7uF 20% 50V
R1040 1-216-805-11 METAL CHIP 47 5% 1/10W C536 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R1041 1-216-805-11 METAL CHIP 47 5% 1/10W (AZ5D)
************************************************************* C537 1-164-156-11 CERAMIC CHIP 0.1uF 25V
(AZ5D)
A-1091-194-A S-MASTER BOARD, COMPLETE (AZ2D)
A-1091-195-A S-MASTER BOARD, COMPLETE C543 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(AZ5D: E2, E3, E12, E15, EA, SP, MY, AUS) (AZ5D)
A-1114-873-A S-MASTER BOARD, COMPLETE (AZ5D: TH) C544 1-164-156-11 CERAMIC CHIP 0.1uF 25V
*************** (AZ5D)
< CAPACITOR > (AZ5D)
C501 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
(AZ5D) C547 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C502 1-126-960-11 ELECT 1uF 20% 50V (AZ5D)
(AZ5D)
C503 1-164-156-11 CERAMIC CHIP 0.1uF 25V C548 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C504 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
C505 1-164-156-11 CERAMIC CHIP 0.1uF 25V (AZ5D)
(AZ5D)
C507 1-164-156-11 CERAMIC CHIP 0.1uF 25V C556 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C509 1-104-665-11 ELECT 100uF 20% 25V
C511 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D)
(AZ5D)
C519 1-104-665-11 ELECT 100uF 20% 25V (AZ5D)
(AZ5D) C576 1-164-346-11 CERAMIC CHIP 1uF 16V
C521 1-126-964-11 ELECT 10uF 20% 50V (AZ5D)
C522 1-126-960-11 ELECT 1uF 20% 50V (AZ5D)
C523 1-126-960-11 ELECT 1uF 20% 50V (AZ5D)
100
HCD-AZ2D/AZ5D
S-MASTER
(AZ5D) (AZ5D)
C580 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V C613 1-164-346-11 CERAMIC CHIP 1uF 16V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) C616 1-136-177-00 FILM 1uF 5% 50V
(AZ5D)
C584 1-100-924-21 ELECT 2200uF 20% 35V C617 1-136-177-00 FILM 1uF 5% 50V
(AZ5D) (AZ5D)
C586 1-136-177-00 FILM 1uF 5% 50V
(AZ5D) C620 1-126-935-11 ELECT 470uF 20% 16V
C587 1-136-177-00 FILM 1uF 5% 50V C621 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C598 1-164-156-11 CERAMIC CHIP 0.1uF 25V C634 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
(AZ5D) (AZ5D)
C599 1-104-665-11 ELECT 100uF 20% 25V C636 1-164-346-11 CERAMIC CHIP 1uF 16V
(AZ5D) (AZ5D)
(AZ5D)
(AZ5D) C643 1-164-346-11 CERAMIC CHIP 1uF 16V
(AZ5D) C644 1-100-924-21 ELECT 2200uF 20% 35V
(AZ5D)
(AZ5D) C646 1-136-177-00 FILM 1uF 5% 50V
(AZ5D)
101
HCD-AZ2D/AZ5D
S-MASTER
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C649 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V C684 1-164-505-11 CERAMIC CHIP 2.2uF 16V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C654 1-164-505-11 CERAMIC CHIP 2.2uF 16V C692 1-164-346-11 CERAMIC CHIP 1uF 16V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C660 1-164-156-11 CERAMIC CHIP 0.1uF 25V C696 1-126-947-11 ELECT 47uF 20% 35V
(AZ5D) (AZ5D)
C697 1-126-947-11 ELECT 47uF 20% 35V
(AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C702 1-126-933-11 ELECT 100uF 20% 16V
C666 1-126-947-11 ELECT 47uF 20% 35V (AZ5D)
(AZ5D) C704 1-100-924-21 ELECT 2200uF 20% 35V
C667 1-126-947-11 ELECT 47uF 20% 35V (AZ5D)
(AZ5D) C706 1-136-177-00 FILM 1uF 5% 50V
(AZ5D)
C669 1-162-961-11 CERAMIC CHIP 330PF 10% 50V C707 1-136-177-00 FILM 1uF 5% 50V
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
C674 1-100-924-21 ELECT 2200uF 20% 35V (AZ5D)
(AZ5D)
(AZ5D) (AZ5D)
C677 1-136-177-00 FILM 1uF 5% 50V (AZ5D)
(AZ5D)
102
HCD-AZ2D/AZ5D
S-MASTER
C729 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V < CONNECTOR >
C731 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V CN501 1-784-780-11 CONNECTOR, FFC 19P (AZ2D)
C732 1-115-185-11 CERAMIC CHIP 0.033uF 10% 50V CN501 1-568-838-11 CONNECTOR FFC 21P (AZ5D)
C733 1-164-346-11 CERAMIC CHIP 1uF 16V CN502 1-568-826-11 CONNECTOR FFC 7P (AZ5D)
* CN503 1-564-512-11 PLUG, CONNECTOR 9P (AZ2D)
C734 1-100-924-21 ELECT 2200uF 20% 35V * CN503 1-764-333-11 PLUG, CONNECTOR 10P (AZ5D)
C736 1-136-177-00 FILM 1uF 5% 50V < DIODE >
C737 1-136-177-00 FILM 1uF 5% 50V
C738 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V D501 8-719-988-61 DIODE 1SS355TE-17
D502 8-719-988-61 DIODE 1SS355TE-17
C741 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V D505 8-719-988-61 DIODE 1SS355TE-17 (AZ5D)
C743 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V D506 8-719-988-61 DIODE 1SS355TE-17 (AZ5D)
D507 8-719-988-61 DIODE 1SS355TE-17
C744 1-117-370-11 CERAMIC CHIP 10uF 10V D508 8-719-988-61 DIODE 1SS355TE-17
C747 1-164-156-11 CERAMIC CHIP 0.1uF 25V D509 8-719-988-61 DIODE 1SS355TE-17 (AZ5D)
C749 1-104-665-11 ELECT 100uF 20% 25V
C751 1-162-923-11 CERAMIC CHIP 47PF 5% 50V D511 8-719-988-61 DIODE 1SS355TE-17 (AZ5D)
D512 8-719-988-61 DIODE 1SS355TE-17 (AZ5D)
D517 6-500-695-01 DIODE UDZSTE-172.7B
C760 1-125-898-11 CERAMIC CHIP 0.22uF 10% 50V D571 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
D601 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
C763 1-164-346-11 CERAMIC CHIP 1uF 16V D602 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
C764 1-100-924-21 ELECT 2200uF 20% 35V D631 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
C766 1-136-177-00 FILM 1uF 5% 50V
C767 1-136-177-00 FILM 1uF 5% 50V D661 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
D662 6-500-260-01 DIODE P6SMB39AT3 (AZ5D)
C770 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V D721 6-500-260-01 DIODE P6SMB39AT3
D751 6-500-260-01 DIODE P6SMB39AT3
C774 1-117-370-11 CERAMIC CHIP 10uF 10V D753 8-719-988-61 DIODE 1SS355TE-17
C783 1-104-662-11 ELECT 22uF 20% 25V < EARTH TERMINAL >
C785 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V EP501 1-537-738-21 GROUND, TERMINAL
C786 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V EP503 1-537-738-21 GROUND, TERMINAL
C787 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V EP504 1-537-738-21 GROUND, TERMINAL
EP505 1-537-738-21 GROUND, TERMINAL
C790 1-126-956-11 ELECT 0.1uF 20% 50V EP506 1-537-738-21 GROUND, TERMINAL
C791 1-104-665-11 ELECT 100uF 20% 25V
C792 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V EP507 1-537-738-21 GROUND, TERMINAL
C793 1-104-665-11 ELECT 100uF 20% 25V
C794 1-164-156-11 CERAMIC CHIP 0.1uF 25V < JUMPER RESISTOR >
C795 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V FB702 1-216-864-11 SHORT CHIP 0
C796 1-104-665-11 ELECT 100uF 20% 25V
103
HCD-AZ2D/AZ5D
S-MASTER
< FILTER >
< TRANSISTOR >
FL504 1-234-177-21 FILTER, CHIP EMI Q571 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)
Q632 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)
< IC > Q657 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC501 6-701-834-01 IC PCM1802DBR (AZ5D) Q661 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)

IC502 6-701-834-01 IC PCM1802DBR (AZ5D) Q662 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)
IC503 6-701-834-01 IC PCM1802DBR Q691 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)
IC504 6-705-979-01 IC CXD9788AR (AZ5D) Q692 8-729-602-36 TRANSISTOR 2SA1602-F (AZ5D)
IC505 6-705-979-01 IC CXD9788AR (AZ5D) Q721 8-729-602-36 TRANSISTOR 2SA1602-F
IC506 6-705-979-01 IC CXD9788AR Q722 8-729-602-36 TRANSISTOR 2SA1602-F

IC507 6-705-695-01 IC CXD9775M (AZ5D) Q751 8-729-602-36 TRANSISTOR 2SA1602-F
IC508 6-705-695-01 IC CXD9775M (AZ5D) Q752 8-729-602-36 TRANSISTOR 2SA1602-F
IC509 6-705-695-01 IC CXD9775M (AZ5D)
IC512 6-705-695-01 IC CXD9775M < RESISTOR >
IC513 6-705-695-01 IC CXD9775M R501 1-216-864-11 SHORT CHIP 0 (AZ5D)

IC514 8-759-387-77 IC TC7WU04F (TE12R) R502 1-216-864-11 SHORT CHIP 0 (AZ5D)
IC515 6-701-189-01 IC MC74VHC1GU04DFT1 R504 1-216-864-11 SHORT CHIP 0 (AZ5D)
IC516 8-759-473-95 IC uPC2905T-E1 R505 1-216-821-11 METAL CHIP 1K 5% 1/10W
IC517 8-759-583-47 IC uPC2933T-E2 (AZ5D)
R506 1-216-864-11 SHORT CHIP 0 (AZ5D)
IC518 6-700-263-01 IC NJM2870F18 (TE2)
IC519 6-707-629-01 IC CXD9845M (AZ5D) R508 1-216-864-11 SHORT CHIP 0
R509 1-216-864-11 SHORT CHIP 0
< COIL/JUMPER RESISTOR > R510 1-219-365-11 SHORT CHIP 0
R511 1-216-809-11 METAL CHIP 100 5% 1/10W
L505 1-412-951-11 INDUCTOR 10uH R512 1-216-864-11 SHORT CHIP 0
L506 1-412-951-11 INDUCTOR 10uH
L516 1-216-295-00 SHORT CHIP 0 R514 1-216-857-11 METAL CHIP 1M 5% 1/10W
L517 1-216-295-00 SHORT CHIP 0 R515 1-216-821-11 METAL CHIP 1K 5% 1/10W
L518 1-216-295-00 SHORT CHIP 0 R516 1-216-864-11 SHORT CHIP 0
R517 1-216-809-11 METAL CHIP 100 5% 1/10W
L519 1-412-939-11 INDUCTOR 1uH (AZ5D)
L520 1-412-939-11 INDUCTOR 1uH R518 1-216-821-11 METAL CHIP 1K 5% 1/10W
L571 1-456-813-11 COIL, AIR-CORE (AZ5D) (AZ5D)
L572 1-456-813-11 COIL, AIR-CORE (AZ5D)
L573 1-456-680-11 INDUCTOR 10uH (AZ5D) R520 1-216-833-11 METAL CHIP 10K 5% 1/10W
(AZ5D)
L601 1-456-813-11 COIL, AIR-CORE (AZ5D) (AZ5D)
L602 1-456-813-11 COIL, AIR-CORE (AZ5D) R522 1-216-821-11 METAL CHIP 1K 5% 1/10W
L603 1-456-680-11 INDUCTOR 10uH (AZ5D) (AZ5D)
(AZ5D)
L631 1-456-813-11 COIL, AIR-CORE (AZ5D) R524 1-216-864-11 SHORT CHIP 0 (AZ5D)
L633 1-456-680-11 INDUCTOR 10uH (AZ5D) R525 1-216-864-11 SHORT CHIP 0 (AZ5D)
L634 1-456-680-11 INDUCTOR 10uH (AZ5D) R527 1-216-809-11 METAL CHIP 100 5% 1/10W
R528 1-216-821-11 METAL CHIP 1K 5% 1/10W
L721 1-456-813-11 COIL, AIR-CORE R531 1-216-864-11 SHORT CHIP 0 (AZ5D)
L722 1-456-813-11 COIL, AIR-CORE
R532 1-216-864-11 SHORT CHIP 0 (AZ5D)
L724 1-456-680-11 INDUCTOR 10uH (AZ5D)
L751 1-456-813-11 COIL, AIR-CORE R535 1-216-833-11 METAL CHIP 10K 5% 1/10W
(AZ5D)
L754 1-456-680-11 INDUCTOR 10uH
104
HCD-AZ2D/AZ5D
S-MASTER
R537 1-216-821-11 METAL CHIP 1K 5% 1/10W R591 1-216-790-11 METAL CHIP 2.7 5% 1/10W
(AZ5D) (AZ5D)
R592 1-216-849-11 METAL CHIP 220K 5% 1/10W
R540 1-216-864-11 SHORT CHIP 0 (AZ5D)
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
R597 1-216-841-11 METAL CHIP 47K 5% 1/10W
R546 1-216-864-11 SHORT CHIP 0 (AZ5D) R599 1-216-809-11 METAL CHIP 100 5% 1/10W
R550 1-216-821-11 METAL CHIP 1K 5% 1/10W
R600 1-216-809-11 METAL CHIP 100 5% 1/10W
R553 1-216-864-11 SHORT CHIP 0 (AZ5D)
R554 1-216-864-11 SHORT CHIP 0 R604 1-216-864-11 SHORT CHIP 0 (AZ5D)
R560 1-216-864-11 SHORT CHIP 0 R610 1-216-818-11 METAL CHIP 560 5% 1/10W
R561 1-216-864-11 SHORT CHIP 0 (AZ5D)
R611 1-216-837-11 METAL CHIP 22K 5% 1/10W
R562 1-216-864-11 SHORT CHIP 0 (AZ5D)
R563 1-216-864-11 SHORT CHIP 0 (AZ5D) R612 1-216-864-11 SHORT CHIP 0 (AZ5D)
R564 1-216-864-11 SHORT CHIP 0 (AZ5D)
R569 1-216-864-11 SHORT CHIP 0 R613 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R614 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R573 1-216-809-11 METAL CHIP 100 5% 1/10W R615 1-216-864-11 SHORT CHIP 0 (AZ5D)
(AZ5D) R616 1-216-864-11 SHORT CHIP 0
R578 1-216-864-11 SHORT CHIP 0 (AZ5D)
R618 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R579 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D) R619 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R580 1-216-818-11 METAL CHIP 560 5% 1/10W (AZ5D)
R583 1-220-942-11 METAL CHIP 3.3 1% 1/4W R630 1-216-833-11 METAL CHIP 10K 5% 1/10W
(AZ5D) (AZ5D)
(AZ5D) (AZ5D)
R585 1-216-864-11 SHORT CHIP 0 (AZ5D) R632 1-216-818-11 METAL CHIP 560 5% 1/10W
R586 1-216-065-00 RES-CHIP 4.7K 5% 1/10W (AZ5D)
(AZ5D) R633 1-216-809-11 METAL CHIP 100 5% 1/10W
R587 1-216-065-00 RES-CHIP 4.7K 5% 1/10W (AZ5D)
(AZ5D) R634 1-216-864-11 SHORT CHIP 0 (AZ5D)
(AZ5D)
R638 1-216-864-11 SHORT CHIP 0 (AZ5D)
(AZ5D) (AZ5D)
R590 1-216-790-11 METAL CHIP 2.7 5% 1/10W R640 1-216-864-11 SHORT CHIP 0 (AZ5D)
105
HCD-AZ2D/AZ5D
S-MASTER
R643 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R693 1-216-809-11 METAL CHIP 100 5% 1/10W
R644 1-220-942-11 METAL CHIP 3.3 1% 1/4W (AZ5D)
R645 1-216-864-11 SHORT CHIP 0 (AZ5D) R695 1-216-791-11 METAL CHIP 3.3 5% 1/10W
R646 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D) R696 1-216-791-11 METAL CHIP 3.3 5% 1/10W
R647 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
(AZ5D)
R648 1-216-065-00 RES-CHIP 4.7K 5% 1/10W R697 1-216-800-11 METAL CHIP 18 5% 1/10W
(AZ5D) (AZ5D)
R698 1-216-800-11 METAL CHIP 18 5% 1/10W
R649 1-216-065-00 RES-CHIP 4.7K 5% 1/10W (AZ5D)
(AZ5D) R706 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R650 1-216-790-11 METAL CHIP 2.7 5% 1/10W (AZ5D)
(AZ5D) R707 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R651 1-216-790-11 METAL CHIP 2.7 5% 1/10W (AZ5D)
(AZ5D) R710 1-216-790-11 METAL CHIP 2.7 5% 1/10W
(AZ5D)
R653 1-216-845-11 METAL CHIP 100K 5% 1/10W R711 1-216-790-11 METAL CHIP 2.7 5% 1/10W
(AZ5D) (AZ5D)
R712 1-216-845-11 METAL CHIP 100K 5% 1/10W
R661 1-216-791-11 METAL CHIP 3.3 5% 1/10W (AZ5D)
(AZ5D)
R718 1-216-841-11 METAL CHIP 47K 5% 1/10W
(AZ5D) R723 1-216-809-11 METAL CHIP 100 5% 1/10W
R664 1-216-864-11 SHORT CHIP 0 (AZ5D) R724 1-216-864-11 SHORT CHIP 0
(AZ5D)
R666 1-216-791-11 METAL CHIP 3.3 5% 1/10W R728 1-216-864-11 SHORT CHIP 0
(AZ5D) R729 1-216-809-11 METAL CHIP 100 5% 1/10W
R730 1-216-818-11 METAL CHIP 560 5% 1/10W
(AZ5D) R732 1-216-864-11 SHORT CHIP 0
R668 1-216-800-11 METAL CHIP 18 5% 1/10W
(AZ5D) R733 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R671 1-216-864-11 SHORT CHIP 0 (AZ5D) R734 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R672 1-216-864-11 SHORT CHIP 0 (AZ5D) R735 1-216-864-11 SHORT CHIP 0
R677 1-216-833-11 METAL CHIP 10K 5% 1/10W R738 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R739 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
R678 1-216-065-00 RES-CHIP 4.7K 5% 1/10W
(AZ5D) R740 1-216-790-11 METAL CHIP 2.7 5% 1/10W
R679 1-216-065-00 RES-CHIP 4.7K 5% 1/10W R741 1-216-790-11 METAL CHIP 2.7 5% 1/10W
R681 1-216-790-11 METAL CHIP 2.7 5% 1/10W
(AZ5D) R748 1-219-365-11 SHORT CHIP 0
R749 1-219-365-11 SHORT CHIP 0
(AZ5D)
(AZ5D) R752 1-216-818-11 METAL CHIP 560 5% 1/10W
R691 1-216-791-11 METAL CHIP 3.3 5% 1/10W R757 1-216-864-11 SHORT CHIP 0
(AZ5D)
106
HCD-AZ2D/AZ5D
S-MASTER SP OUT VIDEO
R758 1-216-864-11 SHORT CHIP 0 C1142 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R759 1-216-809-11 METAL CHIP 100 5% 1/10W (AZ5D)
R762 1-216-864-11 SHORT CHIP 0 (AZ5D)
R763 1-220-942-11 METAL CHIP 3.3 1% 1/4W
R764 1-220-942-11 METAL CHIP 3.3 1% 1/4W (AZ5D)
R768 1-216-065-00 RES-CHIP 4.7K 5% 1/10W (AZ5D)
R769 1-216-065-00 RES-CHIP 4.7K 5% 1/10W C1146 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R770 1-216-790-11 METAL CHIP 2.7 5% 1/10W (AZ5D)
R771 1-216-790-11 METAL CHIP 2.7 5% 1/10W (AZ5D)
R772 1-216-845-11 METAL CHIP 100K 5% 1/10W C1148 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R774 1-216-845-11 METAL CHIP 100K 5% 1/10W
R775 1-216-222-00 RES-CHIP 10K 5% 1/8W < CONNECTOR >
R783 1-216-821-11 METAL CHIP 1K 5% 1/10W CN1100 1-691-767-11 PLUG (MICRO CONNECTOR) 5P
R785 1-216-222-00 RES-CHIP 10K 5% 1/8W CN1101 1-691-766-11 PLUG (MICRO CONNECTOR) 4P (AZ5D)
R786 1-216-857-11 METAL CHIP 1M 5% 1/10W CN1102 1-691-768-11 PLUG (MICRO CONNECTOR) 6P (AZ5D)
R787 1-216-809-11 METAL CHIP 100 5% 1/10W
R788 1-216-841-11 METAL CHIP 47K 5% 1/10W < COIL >
R789 1-216-841-11 METAL CHIP 47K 5% 1/10W L1101 1-420-872-52 COIL, AIR-CORE (AZ2D: KR)
R790 1-216-222-00 RES-CHIP 10K 5% 1/8W L1102 1-420-872-52 COIL, AIR-CORE (AZ2D: KR)
R791 1-216-809-11 METAL CHIP 100 5% 1/10W L1103 1-420-872-52 COIL, AIR-CORE (AZ2D: KR)
R792 1-216-837-11 METAL CHIP 22K 5% 1/10W L1104 1-420-872-52 COIL, AIR-CORE (AZ2D: KR)
R793 1-216-837-11 METAL CHIP 22K 5% 1/10W
< RESISTOR >
R794 1-216-828-11 METAL CHIP 3.9K 5% 1/10W
R795 1-216-837-11 METAL CHIP 22K 5% 1/10W R1101 1-245-711-31 CARBON 10 5% 1/2W
R796 1-216-222-00 RES-CHIP 10K 5% 1/8W (AZ2D: KR)
R1102 1-245-711-31 CARBON 10 5% 1/2W
< VIBRATOR > (AZ2D: KR)
R1103 1-245-711-31 CARBON 10 5% 1/2W
X501 1-795-843-11 VIBRATOR, CRYSTA (12.288MHz) (AZ2D: KR)
X502 1-795-660-21 QUARTZ CRYSTAL UNIT (49.152MHz) R1104 1-245-711-31 CARBON 10 5% 1/2W
************************************************************* (AZ2D: KR)
R1113 1-245-711-31 CARBON 10 5% 1/2W
SP OUT BOARD (AZ2D: KR)
*************
R1114 1-245-711-31 CARBON 10 5% 1/2W
< CAPACITOR > (AZ2D: KR)
R1115 1-245-711-31 CARBON 10 5% 1/2W
C1113 1-131-992-11 CERAMIC CHIP 100000PF 35V (AZ2D: KR)
(AZ2D: KR) R1116 1-245-711-31 CARBON 10 5% 1/2W
C1114 1-131-992-11 CERAMIC CHIP 100000PF 35V (AZ2D: KR)
(AZ2D: KR)
C1115 1-131-992-11 CERAMIC CHIP 100000PF 35V < TERMINAL >
(AZ2D: KR)
C1116 1-131-992-11 CERAMIC CHIP 100000PF 35V TM1100 1-780-224-11 TERMINAL BOARD (SP) (2P) (AZ5D)
(AZ2D: KR) (SPEAKER FRONT L/R)
C1117 1-131-992-11 CERAMIC CHIP 100000PF 35V TM1100 1-780-226-11 TERMINAL BOARD (SP) (2P) (AZ2D)
(AZ2D: KR) (SPEAKER FRONT L/R)
TM1101 1-780-225-11 TERMINAL BOARD (SP) (4P) (AZ5D)
C1118 1-131-992-11 CERAMIC CHIP 100000PF 35V (SPEAKER SURR L/R, S.WOOFER, CENTER)
(AZ2D: KR) *************************************************************
C1119 1-131-992-11 CERAMIC CHIP 100000PF 35V
(AZ2D: KR) VIDEO BOARD
C1120 1-131-992-11 CERAMIC CHIP 100000PF 35V ************
(AZ2D: KR)
C1137 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V < CAPACITOR/JUMPER RESISTOR >
C1201 1-126-960-11 ELECT 1uF 20% 50V
(AZ5D) C1205 1-126-965-11 ELECT 22uF 20% 50V
107
HCD-AZ2D/AZ5D
VIDEO
R1209 1-216-809-11 METAL CHIP 100 5% 1/10W
C1207 1-126-960-11 ELECT 1uF 20% 50V R1211 1-218-285-11 METAL CHIP 75 5% 1/10W
C1208 1-126-960-11 ELECT 1uF 20% 50V *************************************************************
C1210 1-104-665-11 ELECT 100uF 20% 25V MISCELLANEOUS
**************
C1211 1-126-916-11 ELECT 1000uF 20% 6.3V
C1212 1-126-916-11 ELECT 1000uF 20% 6.3V 61 1-828-329-11 WIRE (FLAT TYPE) (13 CORE)
C1214 1-126-916-11 ELECT 1000uF 20% 6.3V 63 1-469-829-11 CORE, FERRITE
C1217 1-162-919-11 CERAMIC CHIP 22PF 5% 50V 67 1-797-175-11 DECK, MECH (CMAL1Z254A) (DECK-B)
C1218 1-162-919-11 CERAMIC CHIP 22PF 5% 50V 101 1-828-304-11 WIRE (FLAT TYPE) (7 CORE)
C1219 1-162-919-11 CERAMIC CHIP 22PF 5% 50V 106 1-797-174-11 DECK, MECH (CMAL5Z230) (DECK-A)
C1220 1-216-864-11 SHORT CHIP 0 151 1-773-125-11 WIRE (FLAT TYPE) (19 CORE) (AZ2D)
151 1-773-160-11 WIRE (FLAT TYPE) (21 CORE) (AZ5D)
C1222 1-216-864-11 SHORT CHIP 0 152 1-828-002-11 WIRE (FLAT TYPE) (17 CORE) (AZ2D)
C1223 1-162-919-11 CERAMIC CHIP 22PF 5% 50V 152 1-828-361-11 WIRE (FLAT TYPE) (19 CORE) (AZ5D)
C1224 1-162-919-11 CERAMIC CHIP 22PF 5% 50V 153 1-400-640-11 CORE, FERRITE
C1225 1-216-864-11 SHORT CHIP 0 154 1-828-333-11 WIRE (FLAT TYPE) (13 CORE)
< CONNECTOR >
157 1-693-670-11 TUNER (TM-10KR) (AZ2D: KR)
CN1201 1-793-565-11 CONNECTOR, FFC (LIF (NON-ZIF)) 13P 157 1-693-671-11 TUNER (TM-10E) (EXCEPT AZ2D: KR)
CN1202 1-785-315-11 PIN, CONNECTOR (STRAIGHT) 3P 203 1-828-947-11 WIRE (FLAT TYPE) (7 CORE)
204 1-400-640-11 CORE, FERRITE
< EARTH TERMINAL > 205 1-769-977-11 WIRE (FLAT TYPE) (13 CORE)
EP1201 1-537-738-21 GROUND, TERMINAL 253 1-828-947-11 WIRE (FLAT TYPE) (7 CORE) (AZ5D)
EP1202 1-537-738-21 GROUND, TERMINAL 0 254 1-769-079-23 CORD, POWER (AZ2D: KR)
0 254 1-777-071-53 CORD, POWER (AZ2D: E12, E13, EA, SP, MY,
< JUMPER RESISTOR > PH/AZ5D: E12, EA, SP, MY)
0 254 1-783-203-13 CORD, POWER (AZ2D: AUS/AZ5D: AUS)
FB1201 1-216-864-11 SHORT CHIP 0 0 254 1-824-642-11 CORD, POWER (WITH CONNECTOR)
FB1202 1-216-864-11 SHORT CHIP 0 (AZ5D: TH)
FB1203 1-216-864-11 SHORT CHIP 0
FB1204 1-216-864-11 SHORT CHIP 0 0 254 1-827-226-11 CORD, POWER
FB1205 1-216-864-11 SHORT CHIP 0 (AZ2D: E2, E3, E15/AZ5D: E2, E3, E15)
256 1-500-386-11 FILTER, CLAMP (FERRITE CORE)
FB1206 1-216-864-11 SHORT CHIP 0 256 1-500-497-11 FILTER, CLAMP (FERRITE CORE)
0 257 1-468-896-11 REGULATOR, SWITCHING(AZ2D: E12, KR, AUS)
< IC > 0 257 1-468-897-11 REGULATOR, SWITCHING
(AZ2D: E2, E3, E13, E15, EA, SP, MY, PH)
IC1201 6-705-602-01 IC MM1623BFBE
0 257 1-468-898-11 REGULATOR, SWITCHING(AZ5D: E12, TH, AUS)
< TERMINAL/JACK > 0 257 1-468-899-11 REGULATOR, SWITCHING
(AZ5D: E2, E3, E15, EA, SP, MY)
J1201 1-537-943-11 TERMINAL, S (S VIDEO OUT) 356 A-1114-646-A MD (AU) ASSY
J1202 1-785-867-11 JACK, PIN 1P (VIDEO OUT) 0 357 8-820-291-02 OPTICAL PICK-UP BLOCK KHM-310CAB/C2RP
J1203 1-793-445-11 JACK, PIN 3P (COMPONENT VIDEO OUT) (Including sled motor, spindle motor)
< COIL >
M001 X-4955-496-1 MOTOR (PULLEY) ASSY (LOADING)
L1201 1-412-058-11 INDUCTOR 10uH M901 1-787-099-11 FAN, DC
M902 1-787-331-21 FAN, D.C. (AZ5D)
< RESISTOR > *************************************************************
R1202 1-216-809-11 METAL CHIP 100 5% 1/10W

R1203 1-216-833-11 METAL CHIP 10K 5% 1/10W
R1204 1-218-285-11 METAL CHIP 75 5% 1/10W
R1205 1-218-285-11 METAL CHIP 75 5% 1/10W
R1206 1-218-285-11 METAL CHIP 75 5% 1/10W
R1207 1-218-285-11 METAL CHIP 75 5% 1/10W

R1208 1-218-285-11 METAL CHIP 75 5% 1/10W
108
HCD-AZ2D/AZ5D
ACCESSORIES
************
0 1-569-007-11 ADAPTOR, CONVERSION 2P

(AZ2D: E3, E15/AZ5D: E3, E15)
0 1-569-008-21 ADAPTOR, CONVERSION 2P
(AZ2D: SP, MY, PH/AZ5D: SP, MY)
0 1-770-019-51 ADAPTOR, CONVERSION PLUG
(AZ2D: EA/AZ5D: EA)
109
HCD-AZ2D/AZ5D
REVISION HISTORY
Clicking the version allows you to jump to the revised page.

Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
Ver. Date Description of Revision

1.0 2005.06 New

HCD-AZ2D-AZ5D SM 987971801

Uploaded by

Copyright:

Available Formats

HCD-AZ2D-AZ5D SM 987971801

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HCD-AZ2D-AZ5D SM 987971801

Uploaded by

Copyright:

Available Formats

HCD-AZ2D/AZ5D

SERVICE MANUAL E Model

• HCD-AZ2D is the amplifier, disc player, tape

DVD DECK RECEIVER

9-879-718-01 Sony Corporation

Tape deck section SELF DIAGNOSIS FUNCTION

Design and specifications are subject to change This appliance is

SAFETY-RELATED COMPONENT WARNING!!

4. TEST MODE .............................................................. 22 8. EXPLODED VIEWS

NOTES ON HANDLING THE OPTICAL PICK-UP MODEL IDENTIFICATION

NOTES ON LASER DIODE EMISSION CHECK

NOTE OF REPLACEMENT THE DMB10 BOARD

TAPE MECH DECK (CMAL5Z230) (DECK-A) SERVICE POSITION

tape mech deck

top panel (TC) section

TAPE MECH DECK (CMAL1Z254A) (DECK-B) SERVICE POSITION

tape mech deck

DVD MECHANISM DECK (CDM86-DVBU101) SERVICE POSITION

Connect extension jig (J-2501-241-A) to the

DMB10 BOARD SERVICE POSITION

MAIN board DMB10 board

Connect extension jig (J-2501-102-A) to the

Connect extension jig (J-2501-244-A) to the

S-MASTER BOARD SERVICE POSITION

Connect extension jig (J-2501-082-A) to the

A–N M–Z ?/1 (power) 1

A–Q R–Z ?/1 (power) 1

Setting the clock

3-1. DISASSEMBLY FLOW

3-2. SIDE PANEL (A)/(B)

3-3. FRONT PANEL SECTION 3-8. DVD MECHANISM DECK

3-4. TAPE MECH DECK 3-5. TOP PANEL (TC) SECTION

3-6. TAPE MECH DECK 3-7. DC FAN (M901)

3-9. OPTICAL PICK-UP BLOCK

3-10. MOTOR (PULLEY) ASSY 3-11. HOLDER (BU) ASSY

3-12. LEVER (BU LOCK)

3-13. CLOSE LEVER

3-14. LEVER (DIR),

3-15. CHASSIS (TOP)

Note: Follow the disassembly procedure in the numerical order given.

3-2. SIDE PANEL (A)/(B)

9 side panel (B)

1 three flat head screws

6 three flat head screws

3-3. FRONT PANEL SECTION

6 wire (flat type) (11 core)

7 wire (flat type) (5 core)

q; front panel section

8 wire (flat type) (8 core)

3-4. TAPE MECH DECK (CMAL1Z254A) (DECK-B)

6 wire (flat type) (8 core)

7 tape mech deck (CMAL1Z254A) (deck-B)

3-5. TOP PANEL (TC) SECTION

4 top panel (TC) section

3-6. TAPE MECH DECK (CMAL5Z230) (DECK-A)

6 tape mech deck (CMAL5Z230) (deck-A)

3 wire (flat type) (7 core)

3-7. DC FAN (M901)

3-8. DVD MECHANISM DECK (CDM86-DVBU101)