Scribd
Upload
613 views2 pages

Arduino KY-037 Sensitive Microphone Sensor Module PDF

The Arduino KY-037 microphone sensor module has two outputs: 1) An analog output that provides a real-time voltage signal of sound intensity. 2) A digital output that produces a high or low signal when sound intensity reaches a certain threshold, which can be adjusted with a potentiometer. The module connects to an Arduino with power to pins 5V and GND, analog output to A0, and digital output to pin 13. Example code is provided to read the digital output to flash an LED when sound is detected, or read the analog output and use the value to control an LED blink rate and print to serial.

Uploaded by

arty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
613 views2 pages

Arduino KY-037 Sensitive Microphone Sensor Module PDF

The Arduino KY-037 microphone sensor module has two outputs: 1) An analog output that provides a real-time voltage signal of sound intensity. 2) A digital output that produces a high or low signal when sound intensity reaches a certain threshold, which can be adjusted with a potentiometer. The module connects to an Arduino with power to pins 5V and GND, analog output to A0, and digital output to pin 13. Example code is provided to read the digital output to flash an LED when sound is detected, or read the analog output and use the value to control an LED blink rate and print to serial.

Uploaded by

arty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Arduino KY-037 Sensitive microphone

sensor module

Microphone sound detection module


For sound detection Module has two outputs:

1. AO, analog output, real-time output voltage signal of the microphone

2. DO, when the sound intensity reaches a certain threshold, the output high and low signal

The threshold-sensitivity can be adjusted via potentiometer on the sensor

Connecting to the Arduino

 Pin + to Arduino 5+

 Pin - to Arduino -

 Pin A0 to Arduino A0 (for analog program)

 Pin D0 to Arduino 13 (for digital program)

Example code: Digital output


int Led = 13 ;// define LED Interface
int buttonpin = 3; // define D0 Sensor Interface
int val = 0;// define numeric variables val

void setup ()
{
pinMode (Led, OUTPUT) ;// define LED as output interface
pinMode (buttonpin, INPUT) ;// output interface D0 is defined sensor
}

void loop ()
{
val = digitalRead(buttonpin);// digital interface will be assigned a
value of pin 3 to read val
if (val == HIGH) // When the sound detection module detects a signal,
LED flashes
{
digitalWrite (Led, HIGH);
}
else
{
digitalWrite (Led, LOW);
}
}

Example Code : analog outputs


int sensorPin = A0; // select the input pin for the potentiometer
int ledPin = 13; // select the pin for the LED
int sensorValue = 0; // variable to store the value coming from the
sensor
void setup ()
{
pinMode (ledPin, OUTPUT);
Serial.begin (9600);
}
void loop ()
{
sensorValue = analogRead (sensorPin);
digitalWrite (ledPin, HIGH);
delay (sensorValue);
digitalWrite (ledPin, LOW);
delay (sensorValue);
Serial.println (sensorValue, DEC);
}

You might also like