IFAV sin. 180 ; TC = 117 ºC 50 A SKN 45 ID K 5; Ta = 45°C; B2 / B6 40 / 57 A SKR 45 K 1,1; Ta = 45°C; B2 / B6 86 / 120 A
IFSM Tvj = 25º C ; 10 ms 700 A
Tvj = 180º C ; 10 ms 600 A 2 2 Features it Tvj = 25º C ; 8,3...10 ms 2500 As 2 Reverse voltages up to 1600 V Tvj = 180º C ; 8,3...10 ms 1800 As Hermetic metal case with glass insulator VF Tvj = 25º C, IF = 150 A max. 1,6 V V(TO) Tvj = 180º C max. 0,85 V Cooling via heatsinks rT Tvj = 180º C max. 5 m Threaded stud ISO M8 or IRD Tvj = 180º C ; VRD = VRRM max. 10 mA ¼ - 28 UNF 2A Qrr Tvj = 160°C, -diF/dt = 10 A/µs 70 µC SKN: anode to stud SKR: cathode to stud Rth(j-c) 0,85 K/W Rth(c-s) 0,25 K/W Tvj -40...+180 °C Typical Applications * Tstg -55...+180 °C All purpose high power rectifier diode Visol - V~ Non-controllable and half- Ms M8 Stud 4 Nm controllable rectifiers ¼ - 28 UNF 2A 2,5 Nm 1) Free-wheeling diodes M8 Stud (lubricated) 1) 3 Nm Recommended snubber ¼ - 28 UNF 2A (lubricated) 2 Nm 2 network: a 5 * 9,81 m/s RC: 0,1 µF, 100 (PR = 1W), m approx. 30 g Rp: 80 k (PR = 6 W) Case E 12
Case E12 (IEC 60191: A 16 U; A 17 MB 2; JEDEC: SO-32B)
*IMPORTANT INFORMATION AND WARNINGS
The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual char acteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non -infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights o f others. SEMIKRON makes no representation or warranty of non-infringement or alleged noninfringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SE MIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.
