Everlight Itr20001 T f316 SB
Everlight Itr20001 T f316 SB
Everlight Itr20001 T f316 SB
2 3
Cathode Emitter
Catodo Emettitore
e 2 e
3 1 4
Anode Collector
Anodo Collettore
6.5±0.3
d d
SCALE 5.000
REF.: EVERLIGHT ITR20001/T/F316 (SB)
2.8
c c
NOTE 1
FOR ALL ELECTRICAL CHARACTERISTICS
SEE DATA SHEET EVERLIGHT
2.8 2.54
-THE ARTICLE MUST COMPLY WITH "ROHS" 2011/65/UE and/or "ELV" 2000/53/CE
0.5± 0.1 (x4) -SUPPLY OF RELEVANT INFORMATION ABOUT SUBSTANCES OR MOISTURE IN THE ARTICLES WITH
REGARDS TO ARTICLE 33 OF "REACH" 1907/2006/EC REGULATION
6.4±0.3 -THE ARTICLE MUST COMPLY WITH THE RELEVANT SUBSTANCES OR MOISTURE RESTRICTION
IMPOSED UNDER TITLE VIII OF "REACH" 1907/2006/EC REGULATION
2.8±0.2 . . . . . . .
b . . . . . . . b
. . . . . . .
TOLLERANZE GEOMETRICHE, CARATTERISTICHE DI CONTROLLO E PRODOTTO SECONDO NORMA TECNICA ELBI/BITRON 03.00.00
GEOMETRIC TOLERANCE, CONTROL AND PRODUCT CHARACTERISTICS SPEC. SPC
ACCORDING TO ELBI/BITRON TECHNICAL SPECIFICATION 03.00.00
>3 TO 6± 0.15 >6 TO 10± 0.18 >10 TO 18± 0.215 >18 TO 30± 0.26 >30 TO 50± 0.31 >50 TO 80± 0.37 >80 TO 120± 0.435 >120 TO 180± 0.5 >180 TO 250± 0.575 >250 TO 315± 0.65 OVER 315± 0.7
2.4 ± 0.2
UP TO 3± 0.125
SEGUIRE LE ISTRUZIONI PER L'USO E L'INSTALLAZIONE DEI PRODOTTI BITRON CENTRO DI COMPETENZA / COMPETENCE CENTER
IN CASO CONTRARIO BITRON DECLINA OGNI RESPONSABILITA' DIMENSIONI, LUNGHEZZE E DIAMETRI (mm) SEC. UNI EN 20286 IT14
MM
PLEASE FOLLOW BITRON COMPONENT "USE & PRECAUTIONS" INSTRUCTIONS.
BITRON DENIES ANY RESPONSABILITY IF "USE & PRECAUTIONS" ARE NOT APPLIED
DIMENSIONS, LENGTH AND DIAMETERS (mm) ACC. UNI EN 20286 IT14 BITRON TECHNICAL CENTRE
STAMPO/FIG. MOLD/CAVITY SCALA/SCALE APPLICAZIONE / APPLICATION : DATA / DATE ENTE / DEPT.
Pro/E
4.9±0.2
- 10.000 20/05/2014
Wildfire DISPENSER TYPE 559 SETEC
DISEGNATO / DRAWN VISTO / APPROVED
MATERIALE E CODICE GREZZO / MATERIAL AND MATERIAL CODE PESO /WEIGHT (gr.)
L.DETKO G.JANS
SOSTITUISCE IL / REPLACE :
a a
ELETTROCOMANDI TRATTAMENTO / TREATMENT ARCHIVIO O N° DISEGNO/ARCHIVE OR DRAWING N.
GROUP
La Elbi International S.p.A./ Bitron si riserva a }
termini di legge la propriet del presente disegno
con divieto di riprodurlo o renderlo noto a terzi DENOMINAZIONE / DESCRIPTION IDENTIFICATIVO / PART N. : IGE
15009119 00
senza autorizzazione.
All rights strictly reserved reproduction or issue
to third parties in any form whatever is not
PHOTODIODE ITR20001/T/F316(SB)
permitted without written authority from proprietors.
8 7 6 5 4 3 2 1
Technical Data Sheet
Opto Interrupter Preliminary
ITR20001/T/F316(SB)
█ Features
․Fast response time
․High analytic
․High sensitivity
․Cut-off visible wavelengthλP=940nm
․Pb Free
․This product itself will remain within RoHS compliant version.
█ Descriptions
The ITR20001/T/F316(SB) consist of an infrared emitting diode and an NPN silicon
phototransistor, encased side-by-side on converging optical axis in a black thermoplastic
housing. The phototransistor receives radiation from the IR only . This is the normal
situation. But when an reflecting object close to ITR, phototransistor receives the
reflecting radiation .For additional component information, please refer to IR and PT.
█ Applications
․Mouse Copier
․Switch Scanner
․Floppy disk driver
․Non-contact Switching
․For Direct Board
4
10
3
10
2
10
1
10
0 1 2 3 4
1000
-20 -10 0 10 20
30
100
1.0 40
10 0.9 50
0.8 60
0.7 70
1 80
0 1 2 3 4
10 10 10 10 10
0.6 0.4 0.2 0 0.2 0.4 0.6
100
C
10
0.1
0.01
0.5 1 1.5 3
2
4.0
1.0
Ta=25 C 3.5
0.8
3.0
0.6 2.5
0.4 2.0
1.5
0.2
1.0
0 0.5
100 300 500 700 900 1100 1300
0 1 2 3 4
2 H:+100°C 15mins
Temperature
5 min 300 cycles 22 PCs 0/1
Cycle
L:-40°C 15 min
3 H:+100°C 5 min
Attenuation of
Power brightness
Thermal Shock 10 sec 300 cycles 22 PCs 0/1
or Electrical
value>20%
L:-10°C 5 min
4 High
Temperature TEMP. : +100°C 1000 hrs 22 PCs 0/1
Storage
5 Low Temperature
TEMP. : -40°C 1000 hrs 22 PCs 0/1
Storage
6 DC Operating VCE=5V
1000 hrs 22 PCs 0/1
Life IF=20mA
7 High 85°C / 85% R.H.
Temperature / 1000 hrs 22 PCs 0/1
High Humidity
Notes
1.All dimensions are in millimeters
2.Tolerances unless dimensions ±0.2mm
3.Lead spacing is measured where the lead emerge from the package
4.Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification
5.These specification sheets include materials protected under copyright of EVERLIGHT
corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent
6.When using this product , please observe the absolute maximum ratings and the
instructions for use outlined in these specification sheets. EVERLIGHT assumes no
responsibility for any damage resulting from use of the product which does not comply
with the absolute maximum ratings and the instructions included in these specification
sheets.
ATTACHMENT(1)