2017 Roofing Product Catalogue PDF

CI/SfB
(47) N
April 2017
Call 01283 722588

Email [email protected]
Or visit www.marleyeternit.co.uk
Roofing
Marley Eternit Lichfield Road Branston Burton upon Trent DE14 3HD product catalogue
Roofing product catalogue 1
Marley Eternit’s extensive range of tiles, slates,
Manufacturing and
Introduction
Knowledge | Manufacturing and stocking locations

dry fix products, ventilation systems and
accessories has been successfully enhancing stocking locations
and protecting our roofs for over 100 years.
We want to make your project, or that of your client, as 1 Glasgow
straightforward and successful as possible, so we’re on Marley Eternit Ltd, Kirkintilloch Road,
hand to offer practical, experienced support in a range of Cadder, Bishopbriggs, Glasgow G64 2PY
useful ways. Open for collections
1
Mon-Thur: 6:30am - 3:00pm
This can be delivering urgent samples where and when Fri: 6:30am - 2:00pm
they’re needed, providing products that help you achieve
an A+ rating and gain credits for your buildings, supplying
2 Gainsborough
bespoke fixing specifications, offering complete dry fixed 2
Marley Eternit Ltd, Old Shipyard, 3
ventilation solutions and much more. Beckingham, Gainsborough DN21 1NG 4
In short, we’re here to support you in any way we can Open for collections
and we’re always happy to take some of the load off Mon-Fri: 9:00am - 11:00 and 5 6
14.00 - 16.00 7
your shoulders.
Trust Marley Eternit to take the hassle out of roofing.
If you ever need advice on any roofing related issue, 3 Keele Key
you can rely on our team to give you a helping hand. Marley Eternit Ltd, Ridgehill Drive,
Clay Clay (limited Fibre cement slate
Madeley Heath, Crewe, Cheshire CW3 9LY selection)
Call 01283 722588 Open for collections

Concrete Timber
Email [email protected] Mon-Fri: 7:30am - 4:00pm
4 Burton 6 Beenham
Marley Eternit Ltd, Lichfield Road, Marley Eternit Ltd, Grange Lane,
Branston, Burton upon Trent DE14 3HD Bath Road, Beenham, Reading RG7 5PU
Open for collections Open for collections
Mon-Thur: 7:00am - 3:00pm Mon-Fri: 7:00am - 3:30pm
Fri: 7:00am - 2:00pm
All factories certified to

ISO 9001, ISO 14001, 5 Bridgend 7 Wrotham*
OHSAS 18001
Marley Eternit Ltd, St Mary’s Hill, Marley Eternit Ltd, London Road,
Mynydd Ruthin, Bridgend, Wrotham, Kent TN15 7RW
Mid Glamorgan CF35 5DU Open for collections
Open for collections Mon-Fri: 7:30am - 4:00pm
Mon-Fri: 8:00am - 4:00pm
* Please note: clay tiles are only available for collection in full pallets.
This publication is based on the latest data available at the time of printing. Due to product changes, improvements and other
factors, the Company reserves the right to change or withdraw information contained herein without prior notice. For specific
applications users should refer to the Technical Advisory Service and relevant Standards and Codes of Practice for guidance.
The photography shown in the document should not necessarily be taken as recommendations of good practice. The printing
process restricts the exact representation of colours. For true colour reference, please request product samples.
2 75
Contents
Contents
The Marley Eternit Roof System 4 Shingles 53
Fixings 56
Base layers
Profiled sheeting 59
Underlays 6
Battens 7 Detailing
Dry fix and ventilation systems 62
Roof coverings
Product selector 8 Other BS 5534 systems 72
Clay plain tiles & fittings 10 Knowledge
Clay interlocking tiles & fittings 19 Resources 73
Fibre cement slates & fittings 25 Minimum banded quantities 74
Concrete plain tiles & fittings 35 Manufacturing and stocking locations 75
Concrete interlocking tiles & fittings 38
33
The Marley Eternit
The Marley Eternit Roof System
The Marley Eternit Roof System

Roof System
We offer the most comprehensive roof
system on the market, underwritten by
a 15 year warranty.
So many elements offered by one supplier,
give levels of accountability and integration
that reduce design and installation liability.
More elements guaranteed to work seamlessly
together, give you more time to focus on
design and management of your project,
complete peace of mind and, of course,
1 2 3
better, more durable, lower maintenance roofs.
Base Roof Detailing

layers covering
4 5
Knowledge Confidence
For more information, visit www.marleyeternit.co.uk/roofsystems
4 5
underlays Red battens Re
Base layers | Underlays
Base layers | Battens

Marley Eternit Universal Vapour Permeable and Non-Breathable underlays are JB Red is a high quality roofing batten and the first fully
high performance roof membranes which are zone 1-5 compliant, in accordance pre-graded batten available to the roofing industry.
with BS 5534.
Universal vapour
permeable underlay
> Vapour permeable
> High tensile and tear strength
> Clean and easy to handle
> Durable
> UV resistant
> BBA approved – certificate no. 16/5335
> Integrated tape for sealing laps
> Guidance lines for minimum laps
Benefits of JB Red
> Pre-graded to all the strength requirements of > Treated to BS 8417:2011 Usage Class 2, using
BS 5534:2014 for roofing battens Koppers MicroPro® with a unique Red Colour
> Marked according to BS 5534:2014 showing > Carries 60 year lifetime guarantee against
supplier name, origin/species, grade (BS 5534) insect attack and wood rotting fungi (when
Universal non-breathable and size installed correctly in accordance with the
underlay > The product and process is UKAS third party
requirements of Usage Class 2)
> Non-breathable assessed by the BBA with a BBA agrément > Packaged in easy to handle bundles of 10
certificate
> High tensile and tear strength > Reduced wastage as it has been factory
> Clean and easy to handle > JB Red is LABC registered detail and is graded
approved for use by local authorities
> Durable > Reduced theft as it is easy to spot if used
> JB Red carries full product liability insurance elsewhere on site
> UV resistant
> BBA approved – certificate no. 16/5334 > Manufactured from slow grown, high grade > Quicker to fix
timber, selected from the approved species
> Lightweight alternative to traditional IF > Machined to give a consistent 25mm thick
within
batten
> Integrated tape for sealing laps
> BS 5534:2014, typically European Redwood
> Guidance lines for minimum laps > Lightweight
(PNSY) or European Whitewood (WPCA)
> Only kiln dried sideboards are used to ensure

stability and dimensional accuracy
6 7
Product selector
Roof coverings | Product selector
Roof coverings | Product selector

Fibre cement slates
Clay plain tiles
Rivendale Garsdale Birkdale Thrutone Vertigo

Canterbury Ashdowne Hawkins Acme double Acme single Features Riven surface Textured surface Smooth surface Smooth surface Fibre cement slate
camber camber Dressed edges Square edges Dressed edges Square edges Vertical applications
Features Handmade Handcrafted Machine-made Machine-made Machine-made Size 600 x 300mm 600 x 300mm 600 x 300mm 600 x 300mm 600 x 300mm
Single camber Single camber Single camber Double camber Single camber 500 x 250mm
Size 265 x 165mm 265 x 165mm 265 x 165mm 265 x 165mm 265 x 165mm Minimum pitch 20° (moderate exposure) 20° (moderate exposure) 15° (moderate exposure)* 15° (moderate exposure)** n/a
Minimum pitch 40° 35° 30° 35° 30° 22.5° (severe exposure) 22.5° (severe exposure) 17.5° (severe exposure)* 22.5° (severe exposure)
Maximum pitch 90° 90° 90° 90° 90° Maximum pitch 90° 90° 90° 90° n/a
No. of colours 3 2 5 6 8 No. of colours 2 1 3 8 8
Page 11 12 13 14 15 Page 26 27 28 30 32
* Figures are for hook fixed Birkdale only. Minimum pitch for nail and rivet fixing is 20° (moderate exposure) or 22.5° (severe exposure).
** 4m max. rafter length.
Clay interlocking tiles Concrete plain tiles

Concrete interlocking tiles
Lincoln Maxima Melodie Plain Edgemere Modern Double Roman Mendip Ludlow Major
range Duo Modern
Features Clay pantile Clay Double Roman Clay pantile Features Cross camber
Open gauge Open gauge Flexible gauge Features Thin leading edge Flat appearance Traditional profile Double pantile Simple, strong lines
Duo replicates Duo replicates Ideal for
Size 370 x 247mm 403 x 333mm 440 x 255mm Size 267 x 168mm
smaller format slates smaller format slates refurbishment
Minimum pitch 17.5° 17.5° 12.5° Minimum pitch 35° Size 420 x 330mm 420 x 330mm 420 x 330mm 420 x 330mm 420 x 330mm
Maximum pitch 70° 70° 70° Maximum pitch 90° Minimum pitch 17.5° 17.5° (Smooth) 22.5° (Smooth) 15° 22.5° (Smooth)
No. of colours 2 1 1 No. of colours 9 Maximum pitch 90° 90° 90° 90° 90°
Page 20 22 23 Page 36 No. of colours 3, 2, 1 6, 2 7 7 7
Page 39-41 42-43 44 45 46
Other products
EcoLogic Ludlow Plus Wessex Anglia Ashmore

Profile 6 Farmscape Profile 3 Ludlow Major
profiled sheeting profiled sheeting profiled sheeting JB Shingles JB Shakes
Features High level of Small format Clean lines Bullnose leading Interlocking double
Features High strength sheet High strength sheet Smaller sheet ideal Machine-made Machine-made recycled aggregate Ideal for Water shedding edge plain tile
ideal for large projects ideal for large projects for smaller projects Double camber Single camber Absorbs NOx refurbishment efficiency Classic pantile
Size Various Various Various Various Various Size 420 x 330mm 387 x 229mm 420 x 330mm 387 x 230mm 267 x 333mm
Minimum pitch 5° 5° 10° 14° 14° Minimum pitch 30° 22.5° 15° 25° (Smooth) 22.5°
Maximum pitch 90° 90° 90° 90° 90° Maximum pitch 90° 90° 44° 90° 90°
No. of colours 11 1 11 1 1 No. of colours 1 6 2 3 3
Page 60 60 60 54 55 Page 47 48 49 50 51
8 9
Canterbury handmade
Roof coverings | Clay plain tiles

True to tradition, a range of three distinctive handmade
clay plain tile colours, with a fine sanded finish suitable for
roofing and vertical tiling.
Colour availability Key (F) Fine sanded finish
Loxleigh (F) Burford (F) Chailey (F)
Technical data
Size of tile 265mm x 165mm
Minimum pitch* 40°
Maximum pitch 90°
Minimum headlap 65mm (roof) 35mm (vertical)
Maximum gauge 100mm (roof) 115mm (vertical)
Tile thickness 13mm (nominal)
Cover width 165mm (nominal)
Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical)
Weight of tiling (approx.) 74kg/m2 (0.73 kN/m2) at 100mm gauge (roof) 66kg/m2 (0.64 kN/m2) at 115mm gauge (vertical)
Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical)
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Tile nails 38mm x 2.65mm
Authority BS EN 1304
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
Sustainability Product information

Tile camber

 A+ rated in the BRE Green Guide (based on
generic rating for UK produced clay plain tiles
Single camber
Element Ref: 812410006)
 BES 6001 Responsible Sourcing certified

Clay plain tiles  Carbon footprint measurement Feature tiles
For advice on the use of feature
tiles in main roof areas contact
and fittings
the Technical Advisory Service.
† Made to order
Club† Bullnose†
Canterbury handmade clay plain tile in mixed blend.
10 11
Ashdowne Hawkins

Handcrafted clay plain tiles offer a warm, mellow Single cambered (longitudinal), machine-made clay tile,
appearance, with a granular texture and slight manufactured for over 150 years. This heritage, combined
random irregularities that make each tile unique. with modern firing techniques, gives a traditional colour range.
Colour availability Key (F) Fine sanded finish Colour availability Key (F) Fine sanded finish (S) Smooth finish (T) Textured finish
Aylesham Mix (F) Ashurst (F) Staffordshire Blue (F) Blue Smooth (S)
Technical data
Minimum pitch* 35°
Maximum pitch 90°
Minimum headlap 65mm (roof) 35mm (vertical) Dark Heather (F) Staffordshire Mixture (F) Fired Sienna (T)
Maximum gauge 100mm (roof) 115mm (vertical)
Cover width 165mm (nominal) Technical data
Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical) Size of tile 265mm x 165mm
Weight of tiling (approx.) 65kg/m2 (0.64 kN/m2) at 100mm gauge (roof) 57kg/m2 (0.56 kN/m2) at 115mm gauge (vertical) Minimum pitch* 30°
Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical) Maximum pitch 90°
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) Minimum headlap 65mm (roof) 35mm (vertical)
Tile nails 38mm x 2.65mm Maximum gauge 100mm (roof) 115mm (vertical)
Authority BS EN 1304 Tile thickness 11mm (nominal)
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. Cover width 165mm (nominal)
Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical)
Sustainability Product information Weight of tiling (approx.) 64kg/m2 (0.63 kN/m2) at 100mm gauge (roof) 56kg/m2 (0.55 kN/m2) at 115mm gauge (vertical)
Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical)
Tile camber

 Ageneric
+ rated in the BRE Green Guide (based on
rating for UK produced clay plain tiles
Single camber Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Authority BS EN 1304
 BES 6001 Responsible Sourcing certified * The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
 Carbon footprint measurement Feature tiles

Sustainability Product information
the Technical Advisory Service. Tile camber
† Made to order
Club† Bullnose†
 Ageneric
Single camber
 BES 6001 Responsible Sourcing certified

† Made to order
Club† Bullnose†
12 13
Acme double camber Acme single camber

Natural clay, machine-made plain tiles with longitudinal Natural clay, machine-made, single cambered (longitudinal)
and latitudinal camber are able to create highly textured plain tiles, offering crisp, contemporary lines and the warmth
roofscapes with accentuated light and shade. and character of clay at an affordable price.
Colour availability Key (F) Fine sanded finish (S) Smooth finish Colour availability Key (F) Fine sanded finish (S) Smooth finish
Smooth Brindle (S) Antique (F) Dark Brindle (S) Red Sandfaced (F) Red Smooth (S) Century (S) Heather Sandfaced (F)
Farmhouse
Burnt Flame (S) Natural Orange (S) Purple Blend (F) Brown Sandfaced (F) Grey Sandfaced (F) Mixed Brindle (S) Heather Blend (F)
Technical data Technical data

Size of tile 265mm x 165mm Size of tile 265mm x 165mm
Minimum pitch* 35° Minimum pitch* 30°
Maximum pitch 90° Maximum pitch 90°
Minimum headlap 65mm (roof) 35mm (vertical) Minimum headlap 65mm (roof) 35mm (vertical)
Maximum gauge 100mm (roof) 115mm (vertical) Maximum gauge 100mm (roof) 115mm (vertical)
Tile thickness 11mm (nominal) Tile thickness 11mm (nominal)
Cover width 165mm (nominal) Cover width 165mm (nominal)
Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical) Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical)
Weight of tiling (approx.) 64kg/m2 (0.63 kN/m2) at 100mm gauge (roof) 56kg/m2 (0.55 kN/m2) at 115mm gauge (vertical) Weight of tiling (approx.) 64kg/m2 (0.63 kN/m2) at 100mm gauge (roof) 56kg/m2 (0.55 kN/m2) at 115mm gauge (vertical)
Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical) Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical)
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Tile nails 38mm x 2.65mm Tile nails 38mm x 2.65mm
Authority BS EN 1304 Authority BS EN 1304
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. * The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
Sustainability Product information Sustainability Product information

Tile camber Tile camber

 Ageneric
Double camber

 Ageneric
Single camber
Element Ref: 812410006) Element Ref: 812410006)
 BES 6001 Responsible Sourcing certified  BES 6001 Responsible Sourcing certified
For advice on the use of feature  Carbon footprint measurement Feature tiles
tiles in main roof areas contact tiles in main roof areas contact
the Technical Advisory Service. the Technical Advisory Service.
† Made to order † Made to order
Club† Bullnose† Club† Bullnose†
14 15
245 220
or 450 165
250 250
125 60 60† 305 185† 305 305 450 305305

75 75
125 60125 185
770 770 185† or 450
185† 185† †
185770 or 450 or 450
Clay fittings and accessories

†
† 185 † 185185 † 110 110
185 185† †

185 800110
110 550 770
305 150 550
305190 or 700 305 305 305
305 245305 150 305 245 305or 700 305
450 450 220 125 75165 305 220 125 245 60
305 450 305 or 450 150 255 150 or 450 305 165
305 305 305 245 305 220 305 305 or 450 1
305or 450 305 165 185† † 185† 185 †
185† 185
260 305 185† 305 305
Clay ridges, hips and valleys 210 Clay 305
crested ridges
110 305 110
Available in a range of colours and angles. Recommended roof pitch may Available in Red Smooth and Slate Black. Recommended roof pitch may vary depending 450
305
305 305 305 305 305 305
305
vary depending on product and system used. For details of the full range 305 on 245
product and system used, please contact220the Technical Advisory Service. 245
or 450 305 or 450 165
150 150
of hips and 150
150valleys, please contact the Technical Advisory Service.
150 or 450 150 190
190 60
800 150 125800 150 150 75 125 125 150 19075 125
150 190 150800 150 125
550 550 770 770 125 310 60 150 185†
Important
150 770note:
150 All of the fittings shown550 on this page
550 can be used 550with75 310 185† 125 185† 185†
185† 185† 185† 185†
or 700 or 700 or 700 or 700 185†
185† 185† 185† 110 185†
all clay310plain tiles, †but should not beorused 700 on a rafter
210 pitch below 35° 185†
210 185†
185 310 210
210with Acme double camber and Ashdowne clay plain tiles. 450
305 305
305 305 305 150 305 150 290 290
260 260305 305 245305 305 310
150
305 305 450
310330 305 305 150 190 305 305
05 305
1 Made305 305
to order (subject to minimum order quantities) 190 330 125 305 60
305 305 305 150 150 305 305 125 290 75 150 150 305 125
2 Some colours 305 310
and angles made to order (subject to minimum order quantities) or 450 330 orPlain
450 roll top†2 290 185†
310 Arris hip2
185 Club crested ridge † Cocks comb crested ridge
or 450 185† ridge
Two hole crested
330 185†
3 Staffordshire or 450available to order
Blue 30-45° pitch
185† 75-135° angles 550 90° and 105° angles185 90° and 105°
150
185 † angles 550 90° and 105° angles
800
130, 305 angles°
135°, 145° (Red Smooth and Slate Black) (Red Smooth)210 (Red
† Angle ridge wing length will vary depending on ridge angle 210 165 80 90 Smooth) (Red Smooth)
255 165 80 90 90 90 450

185† † 165 80
185 165 185† 305 90 305 305 305
185† 80 90
185† 305 110 90 RH 305
265 260 305 90 305 305
310 or 450
265
265
Clay finials 305 or 450 110
265 305 107
305 265 305 Available
265305 in a range of colours and angles. Recommended roof pitch may vary
265
450 260 260 265
165 260 290 305290 245 305 305
107 133 305 5
310 310 305
330
80
330450 290 265 305260 550 260 depending
107 on product
265 and
150system
260 used,
550please
550 contact245the Technical800
265 49
Advisory Service.
150 550
330 290 305 450
165 305 107 800 133 550
165 550 15080 550 133 265 305 290
330 305 80 bonnet hip
Granny Semi-bonnet
165 hip Valley2 Half round ridge 310 133 330
80
40-60° pitch 30-40° pitch 30-50° pitch 255 30-50° pitch 255
255
255 130-150° angles
260 305 550 550 260 305 550 305 550 305 30
65 80 260 165 185†
80 90 185† 90 (or 700 305†305 (or 700
185
550 550
(or 305
700 260 305 305(or 700 770
550
770
305 395 400 185†
90 165 90 (or 700 165 (or 700 305
(or 700 90
†
185 185† with with 185 † 305 † with 80 185 †
with 800†
90 305 90 185 150 550 550with 185
90RH RH90 185† 550
with 185† with
RH extension 305 extension extension 305 550 extension 185† 90
piece) 110 110 extension piece)extension or 700 305 extension 550
305 piece) piece)
450 255 piece) 305 piece) 305255 piece) or 700
260 290
265 250 450 75 305 265 260
75 320 260 or 450 255
450
305 305 305 305 305 450 305 305 305 305 305
305 305107 305 107 5 5 450 305 450 305 305 305 265 305
260
260 260 107 260 260 305
107 265 290265
260 26522095 245 245 30549450 255
305
260 49
260 305
305 305 260
235
or305
450
450 305
305 260
450 305 305 305 305 305
107
265133 133 4
290 260 305 260 260 305 305 305 450 265
305 305
133ridge hip end1 133 or 450 305 133
Half round Half round ridge stop end1 Third round hip2 Third round
80 hip end 165
2
30-50º pitch 30-50º pitch 30-45° pitch 30-45° pitch Ball top finial1 Fleur-de-Lys gable1 Scroll finial1 Falcon finial1 Dragon finial1
770 770 770
Half round and Half round and Half round and Half round and plain 75° and 90º
770 770
plain angle bases plain angle bases plain angle bases angle bases available plain angle
†
185185† 165
185† 185†
165 185†
available 185† available available 185† in 75° and 90° only bases only
185† 185† 185† 185† 185† 150 185† 90 150
165 185† 185† 185† 185† 165
550165 550 185† 185† 185† 185† 185† 265
185† 185 † 90
550 185 †
550 550 LH
75 or 700 125305250 or 700 305 60 550
or 700 305 or 700 770
or 700 Important note: All of the fittings shown on this page can be 305 used with
250 185† 305 770 305 770
450 450450 305 or450
700 305
250 185† 185† 255 255 255 305 305 250 450
450 450305 250 305 305 450 or 450 305
220 305 all clay
450 plain
305 tiles, but should not be used on a rafter pitch
or 450below
305 305 35° 305
305 260
305 450 305 305 260 305 450
450 450
305
450mm capped angular ridge3 305 450mm capped
or 450
260305
angular
305
305 260capped angular 305305 305 Angular ridge 305450 450 450 with290
Acme double camber305
or 450
and305
Ashdowne
107 260
133 220plain tiles.
clay 260 or 450
305
260 305 or450mm
450 305 1 or 450
75-135° 305
angles ridge stop end1 ridge hip450
endor 450 305mm 90-105°
(Red305
Smooth, Slate Black 305angles
75-135° 75-135° angles (All colours) 1 Made to order (subject to minimum order quantities)
2
305
and Staffordshire Blue) (Red Smooth, Slate Black (Red Smooth, Slate Black 2 Some colours and angles made to order (subject to minimum order quantities)
450mm 75-135°
and Staffordshire Blue) and Staffordshire Blue) (Red Smooth and Slate Black) † Angle ridge wing length will vary depending on ridge angle 305 305
185†
185† 185†
90 165 165 † 90
† 90 265
†
265 165 110
185 185 185 185† 185†
265 12590 90†
185 75 90 125 60 185†
LH LH 770 60
LH 110 125 185† 75 125
185 † 110 † 305 305 305 770
185† 305 185245 185†
450 450
250 250
or 450
305
305 305 250 185†
305 800 185†
220
305
More
185 about our roof systems
†
165
450 550 305 305 305 770
245305 220 220 305 305
107 133 305 107 133 245 550 305 220 305 305 We offer
305 the most comprehensive roof450system on the
107 or 700133or 450 or 450 220 450 165 or 450
or 450 or 700 or 450
165 market, underwritten by a 15 year warranty.
305end1
Angular ridge stop Angular ridge hip end305 1 Hogs back ridge2 305 Mono ridge1 305 450
75-135° angles 75-135° angles 30-45° pitch 305 pitch
30-45° 305 www.marleyeternit.co.uk/roofsystems
305 305
305 305
305 305
150
150 190 60
150in mm. 150 150 125 185† 75 125
16 Note: All measurements 150 60 60 185† 17
75 150
75 190 125 125 185† 60110 †
150 150 190 125 † 75 770 770 125 185 † 185
150 †185
125 185† 75 125 60
800 †
265 265 265
265 265 265 265
215 215 215
265 265
Clay fittings and accessories

265 265
265
Roof coverings | Clay interlocking tiles

265 265 265
265 215 215
265 215
265 265
5 248 248 165 248
165 165 165 165 165 165
248 248 248 248
165 165 165 248 165 248
Clay plain tile165fittings 165
Available
248in a range of colours.
165 165
265 265 265 265

265 265 265
215 215 215
265 265 265
265 265 265 265
265 265 265 265
5 265 215 265
215 265 215 265 265 215265
215 215 310
165 248 248 165 248 248 248 248
165 165
248 248 290 248 248

165 248 248
165 248 165 248 290
165 165 330165 165
165 165 165 248 165 165 310 330
165 165
Creasing tile Eaves/top tile Tile-and-a-half Club feature tile1 RH club LH club
tile-and-a-half1 tile-and-a-half1
165 80 90 LH 165 80 90
265 265 265 LH 265 265 RH
265 90 90
215 265 215 265 265
215 265
265 265 265 265
5 265 215
215
265215
265 265
107 265 107
248 248 248 133 248 265
165 248 165 248 RH 133
165 165 80 165
248 165 248 248
Bullnose
165 165RH bullnose LH bullnose Left and right 248 90° External
165 angle tiles
165 165 165
feature tile1 tile-and-a-half1 tile-and-a-half1 cloaked verge tiles1 (135° also available 1)
The following dry fix and/or ventilation systems can also be used with clay plain tiles:
265 265 265
265
265 265 265 265 265
450 305 305 265 305 265
> Universal 265
10mm and 25mm 265
eaves vent 305 305
215 215 260 215
265 215 > Universal
265
260 GRP valley
or 450(page 65)
260 290
450
260 260
215 or 450
systems215
(page 64) > Universal RidgeFast system* (page 65)
> Universal dry verge (page 64) > Universal HipFast system* (page 64)
165 165 248 248
> Universal
165 plain 248
tile vent248
(page165
66) 248 248 248
248
248
248
165 165 165 248 165 248
165
185† 185 † 165

185†
Clay in-line tile vent Accessories 185† 185† 185†
Available in a range of bases with real clay tile slips on the visible
edge (3 tiles wide). The clay tile vent provides a net ventilation 250
Clay interlocking tiles

area of 7,500mm2 per vent. Suitable for natural,450 mechanical or 305
305 305 305 450 305
soil pipe ventilation. 265 or 450 265
or 450 265 or 450 or 450
265
265265 265 265 215 265 265 265 265
265
and fittings
215 215 265 215
215 265 265 215
Tile vent adaptor Flexible pipe
248 248
165 165
248 185†
5 248 248 248248 248
248 49 165
248 248 248
165 110 165165
165 165 330 165 110
305 305 305 305

305 305 305
1 Made to order (subject to 220
minimum order quantities) 165
245 220
or 450 Lincoln clay pantile, Rustic Red,165
Old Dalby, Leicestershire
* Subject to ridge/hip angle
265 265
265 265
265 215
265 265
18 215
Note: All measurements in mm.
265
19
215
150
Lincoln

The Lincoln is an easy-to-fix clay pantile which balances
traditional aesthetics with speed of installation.
Colour availability Key (SS) Semi-sanded finish (S) Smooth finish
375 150
240 240 385 385 90
150 270
385 385 90
240
270
Lincoln blockend hip

lincoln blockend ridge tile lincoln dentil
Rustic Red (SS) Natural
Lincoln blockend hip Red (S) lincoln blockend ridge tile lincoln dentil lincoln hip tile
Technical data Lincoln fittings

Size of tile 370mm x 247mm Available in Rustic Red and Natural Red.
Minimum pitch* 17.5° (120mm headlap)
22.5° (75mm headlap) 375
240
Maximum pitch 70° 150
385 385 90
240
Minimum headlap 75mm 270
247
Maximum gauge 295mm 370 370 375
247 247 270
Cover width 222mm (nominal) 370 375
247 270
Covering capacity (net) 15.3 tiles/m2 at 75mm headlap Lincoln blockend hip Left hand verge Tile vent lincoln hip tile
lincoln blockend ridge tile lincoln dentil lincoln verge
18.0 tiles/m2 at 120mm headlap lincoln inline vent tile
lincoln verge tile lincoln ridge tile
Weight of tiling (approx.) 43.0kg/m at 75mm headlap
2 lincoln inline vent tile
lincoln ridge tile
Battens required (net)

50.4kg/m2 at 120mm headlap
3.4 lin.m/m at 75mm headlap
2
Lincoln ridges and hips
4.0 lin.m/m2 at 120mm headlap Available in Rustic Red and Natural Red.
50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Fixing clips Eaves, verge and tile clips
375
Authority BS EN 1304 370 240
247 370 150
385 247 385 90
* The minimum recommended pitch and lap may be influenced247 370
by special circumstances, please contact the Technical Advisory
370 Service. 240 375 375 385 150
247 270 270 240 240 385 90
150 385 270
385 385 90 240 270
240 Half round ridge Half round ridge
tile end Third round hip Third round hip end Dentil slips
Compatible dry fix and Security fixing kits
lincoln tile lincoln inline vent tile
270 lincoln
lincoln verge tile
ventilation systems > Mortar bedded security ridge (page 58) Lincoln blockend hip lincoln ridge tile
lincoln blockend ridge tile
lincoln Lincoln
dentil blockend hip lincoln hip tile
lincoln blockend ridge tile
lincoln blockend ridge tile lincoln dentil
> New Universal dry verge (page 64) > Mortar bedded security hip (page 58) lincoln blockend ridge tile lincoln dentil lincoln hip tile
> Universal RidgeFast system (page 65)

> Universal HipFast system (page 64)
> Universal 10mm and 25mm eaves
vent systems (page 64)
370
> Universal GRP dry valley system (page 65) 247
20 Note: All measurements in mm.

247
370 21
370 375 37
lincoln tile 247 270 370 247 270
370 247 375
Maxima Melodie

A clay interlocking double roman tile, suitable for roof pitches An interlocking single clay pantile with an easy-
down to 17.5°, with an easy-to-lay open gauge design. to-install flexible gauge, which is suitable for roof
pitches as low as 12.5°.
Colour availability Colour availability
Natural Red Natural Red

Minimum pitch* 17.5° Minimum pitch* 12.5°
Minimum headlap 75mm Minimum headlap 92mm
Batten spacing 328mm (at 75mm headlap) Batten spacing 314mm (minimum gauge) 348mm (maximum gauge)
Covering capacity (net) 10.1 tiles/m2 at maximum gauge Covering capacity (net) 13.8 tiles/m2 at 92mm headlap
Weight of tiling (approx.) 43.4kg/m2 at 75mm headlap Weight of tiling (approx.) 44kg/m2 at 92mm headlap
Battens required (net) 3.05 lin.m/m2 at 75mm headlap Battens required (net) 2.88 lin.m/m2 at 92mm headlap
50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) 50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Tile nails 45mm x 3.35mm aluminium clout head Tile nails 45mm x 3.35mm aluminium clout head
Fixing clips SoloFix (30443/30433), Eave clip (30452), Eave clip nail (30455), RH verge clip (30289), Fixing clips SoloFix (30435/30445), Eave clip (30452), Eave clip nail (30455), RH verge clip (30285),
LH verge tile clip (30289), LH verge clip – standard tile (30290) LH verge tile clip (30285)
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. * This minimum pitch is suitable for rafter lengths up to 6 metres. For longer rafter lengths, please contact our Technical Advisory Service.
Maxima fittings Melodie fittings

Available in Natural Red. Available in Natural Red.
440
363 403 267
Left hand verge tile

Left hand verge tile (double roll)
(double roll)
22 Note: All measurements in mm. Note: All measurements in mm. 23

91 91 247
457 457 457
248 248

Roof coverings | Fibre cement slates

162
fittings and accessories 162 160

160
88 88 298
457 457 457
Concrete
91
91 ridges and
457
91
91 hips for
457
use298with
247
247 Maxima and Melodie
248 248
248 457 248 457 457

clay interlocking tiles
248 248 457
457
Available in Mosborough Red. Recommended roof pitch may vary depending on product and
system used, please contact the Technical Advisory Service.
162
162
265 70 75.5
65 457
325 300
88 88 298 457 219
88 88 298 150 150
457 457 457
248 457 248 457 457
248 248
135
Segmental ridge Segmental security ridge Segmental block end ridge
255
107 122
457 84 457
75.5 75.5 457 450
75.5 457 75.5 300 218
457 457 75.5 457 457 457 265
219 70457
219 45775.5
75.5 219 457 457
65
219 219 70 219
65 325
325
219
300
150
219 457 219
150 150 300 219round stop end hip
150 Third round hip Third round security
150
hip Third
162
The following Universal products and accessories can be used with concrete segmental
ridges, third round hip tiles and for use with Maxima247
and Melodie interlocking clay tiles.
457
> Universal 10mm and 25mm107 eaves > Universal
122 tile vent (Maxima only, page 65)
84 107 122 457
84
vent 457 (page 64)
systems 450 457
265 457 300 450 > 218
Mortar bedded security ridge (page 58)
265 300 218
> Universal HipFast system (page 64) > Mortar bedded security hip (page 58)
> Universal RidgeFast system (page 65)
62
> Universal GRP dry valley (page 65)
Fibre cement slates

and fittings
More about our roof systems
We offer the most comprehensive roof system on the
market, underwritten by a 15 year warranty.
www.marleyeternit.co.uk/roofsystems Thrutone Blue/Black, Westbrook Primary School, Hounslow
24 Note: All measurements in mm. 25

Rivendale Garsdale

A finely detailed surface and dressed edges that A detailed surface and square edge that closely
together reproduce the attractive appearance of resembles natural slate, but is easier and faster
natural slate. to install.
Blue/Black Cromleigh Graphite Blue/Black

Size of slate 600mm x 300mm Size of slate 600mm x 300mm
Minimum pitch* Moderate exposure 22.5° (100mm headlap) Minimum pitch* Moderate exposure 22.5° (100mm headlap)
20° (110mm headlap) 20° (110mm headlap)
Severe exposure 25° (100mm headlap) Severe exposure 25° (100mm headlap)
22.5° (110mm headlap) 22.5° (110mm headlap)
Typical headlaps 100, 110mm Typical headlaps 100, 110mm
Maximum gauge 245-250mm Maximum gauge 245-250mm
Slate thickness 4mm (nominal) Slate thickness 4mm (nominal)
Covering capacity (net) 13.4 slates/m2 at 100mm headlap Covering capacity (net) 13.4 slates/m2 at 100mm headlap
13.6 slates/m2 at 110mm headlap 13.6 slates/m2 at 110mm headlap
Weight of slating (approx.) 20.4kg/m2 (0.20 kN/m2) at 100mm headlap Weight of slating (approx.) 20.4kg/m2 (0.20 kN/m2) at 100mm headlap
20.9kg/m2 (0.20 kN/m2) at 110mm headlap 20.9kg/m2 (0.20 kN/m2) at 110mm headlap
4.08 lin.m/m2 at 110mm headlap 4.08 lin.m/m2 at 110mm headlap
Fixings Slate nails (30mm x 2.65mm) Fixings Slate nails (30mm x 2.65mm)
Copper disc rivets (19mm diameter x 2mm stem) Copper disc rivets (19mm diameter x 2mm stem)
Edge profile Edge profile

Sustainability Sustainability

 A+ rated in the BRE Green Guide (based on generic
rating for UK and Ireland produced fibre cement slates
 Arating
+ rated in the BRE Green Guide (based on generic
for UK and Ireland produced fibre cement slates
Element Ref: 812410008) Element Ref: 812410008)
 BES 6001 Responsible Sourcing ‘Very Good’  BES 6001 Responsible Sourcing ‘Very Good’
 EPD available for Rivendale slates  EPD available for Garsdale slates
26 27
Birkdale

A smooth surface and dressed edges offer Low pitch Birkdale
a traditional and pleasing look using nail and Low pitch Birkdale slates have no nail hole and can be used for pitches down to 15° (with hook
rivet fixing down to 20°. fixing). They complement our Birkdale range using nail and rivet fixing for steeper pitches.
Blue/Black Blue/Black Flame Grey Flame Brown

Minimum pitch* Moderate exposure 22.5° (100mm headlap) Minimum pitch* Moderate exposure 15° (150mm lap, max. 6m rafter length)
20° (110mm headlap) Severe exposure 17.5° (150mm lap, max. 9m rafter length)
Severe exposure 25° (100mm headlap) Maximum pitch 90°
22.5° (110mm headlap) Typical headlaps 150mm
Maximum pitch 90° Maximum gauge 225mm
Typical headlaps 100, 110mm Slate thickness 4mm (nominal)
Maximum gauge 245-250mm Covering capacity (net) 14.8 slates/m2 at 150mm headlap
Slate thickness 4mm (nominal) Weight of slating (approx.) 22.8kg/m2 (0.20 kN/m2) at 150mm headlap
Covering capacity (net) 13.4 slates/m2 at 100mm headlap Battens required (net) 4.45 lin.m/m2 at 150mm headlap
13.6 slates/m2 at 110mm headlap
Weight of slating (approx.) 20.4kg/m2 (0.20 kN/m2) at 100mm headlap 50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
20.9kg/m2 (0.20 kN/m2) at 110mm headlap
Fixings Slate hooks (150mm)
Battens required (net) 4.00 lin.m/m2 at 100mm headlap
4.08 lin.m/m2 at 110mm headlap Authority BS EN 492
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534) * The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
Fixings Slate nails (30mm x 2.65mm)
Copper disc rivets (19mm diameter x 2mm stem) Edge profile
Authority BS EN 492
Sustainability

 Arating
Edge profile Element Ref: 812410008)
Sustainability  BES 6001 Responsible Sourcing ‘Very Good’

 Arating
+ rated in the BRE Green Guide (based on generic  EPD available for Birkdale slates
Element Ref: 812410008) Hook fixing
 BES 6001 Responsible Sourcing ‘Very Good’ Watch a quick video on hook fixing
 EPD available for Birkdale slates

at marleyeternit.co.uk/birkdale or
scan the QR code shown.
28 29
Thrutone

A smooth surface and square cut edges give a low profile
slate at an economical price with a minimum pitch of 15°.
Colour availability
Technical data
Size of slate 600mm x 300mm 500mm x 250mm
Minimum pitch*
Moderate exposure 22.5° (100mm headlap) 22.5° (100mm headlap)
20° (110mm headlap)
Severe exposure 25° (100mm headlap) 25° (100mm headlap)
Blue/Black Heather* Turf Brown* 22.5° (110mm headlap)
4m max. rafter length 15°-17.5° (110mm headlap)
6m max. rafter length 17.5°-20° (110mm headlap)
Maximum pitch 90° 90°
Typical headlaps 100, 110mm 100mm
Maximum gauge 245-250mm 200mm
Slate thickness 4mm (nominal) 4mm (nominal)
Covering capacity (net) 13.4 slates/m2 at 100mm headlap 20.0 slates/m2 at 100mm headlap
13.6 slates/m2 at 110mm headlap
Stone Green* Russet* Terracotta*
Weight of slating (approx.) 20.4kg/m2 (0.20 kN/m2) at 100mm headlap 21.3kg/m2 (0.21 kN/m2) at 100mm headlap
Battens required (net) 4.00 lin.m/m2 at 100mm headlap 5.00 lin.m/m2 at 100mm headlap
4.08 lin.m/m2 at 110mm headlap
Fixings Slate nails (30mm x 2.65mm) Slate nails (30mm x 2.65mm)
Copper disc rivets (19mm diameter x 20mm stem) Copper disc rivets (19mm diameter x 20mm stem)
Authority BS EN 492 BS EN 492
Graphite* Zinc Grey*
Shape availability Edge profile

Bullnose* Chamfered* Scalloped* Sustainability

 Arating
 BES 6001 Responsible Sourcing ‘Very Good’

 EPD available for Thrutone slates
30 * Made to order and subject to a lead time 31

Vertigo
Facade coverings | Fibre cement slates
Facade coverings | Fibre cement slates

Avant-garde or traditional, the Vertigo range gives free rein to your creativity and Colours and systems
brings a new dimension to design with fibre cement slates. The small, slate-like For new build as well as renovation work, the Vertigo range of fibre cement slates
panel size perfectly adapts to the contours of the building and provides a second, offers an excellent aesthetic and protective solution. Existing buildings with
protective skin which enables visual and performance continuity between roof and irregularities in walls can be corrected (using brackets) at the same time as being
facade, creating a complete and beautiful building envelope. radically embellished and given real added value.
White Sable Terracotta Flame Grey
Flame Brown Taupe Zinc Grey Anthracite
Traditional Broken bond Panel

Natural slate appearance Staggered panels giving Regular bond panels giving
with slate hooks. close boarded effect. geometric precision.
No drilling Pre-holed for broken bond installation Pre-holed for regular bond installation
32 33
Fibre cement slate fittings
Roof coverings | Concrete plain tiles

Increments are in 5° where ranges of angle are indicated.
Available in Blue/Black. Recommended roof pitch may vary
depending on product and system used, please contact the
Technical Advisory Service. See pages 64-66 for Universal
accessories, which are compatible with fibre cement slates.
Also available: In-line ridge ventilator stepped adaptor, Flexible pipe.
190
190 190 190
190 190 190
190
190
190190
190 190
190190 190
190190 190
190190 190 190
190 190 190
190 190
900
900 900 900 900
900 900 900
900
900900
900
900900 900
900900 900
900900 900
900 900 900 900
900 900 900
Duo pitch ridge*† Stop end for duo pitch ridge* Monopitch ridge* Stop end for monopitch ridge*
(15° to 60°) (15° to 60°) (15° to 45°) (15° to 45°)
(Also suitable for hip applications
– contact our Technical Advisory
Service for details) 190
190 300
300
190
190190
190 300
300300
190 300
300
900
900
900
900900 600
900 600
900
600
600600
600
In-line ridge ventilator 600
In-line slate ventilator Fibre cement ridge roll
plus extension sleeve (minimum 20°)
(20° to 45°)
More about our roof systems

We offer the most comprehensive roof system on the
market, underwritten by a 15 year warranty. Concrete plain tiles
and fittings
www.marleyeternit.co.uk/roofsystems
* 6m ventilated ridge roll available to provide continuous ventilation

Concrete plain tile, Dark Red, Faydon, West Sussex
† Also suitable for hip applications – contact Techncial Advisory Service for more details.

Plain

The authentic cross camber design of the Marley Eternit concrete
plain tile gives it a look to match its outstanding versatility.
Colour availability Key (F) Fine sanded finish (G) Granular finish (S) Smooth finish
Mosborough Red (S) Natural Red (F) Old English Dark Red (S) Dark Red (G)
Smooth Brown (S) Antique Brown (G) Smooth Grey (S) Greystone (G) Anthracite (S)
Technical data 115 115

Plain tile fittings 78
78 78 158 158 34
11534 34
158 115
Minimum pitch* 35° Available in all colours to match main tiles. 78 158 34
34115
78 158 115 115 267 267
115
78 78 34 34 34
267
Maximum pitch 90° 15878 158 158
267
Minimum headlap 65mm (roof) 37.5mm (vertical) 267
267 267 2
Maximum gauge 100mm (roof) 115mm (vertical) 267 267
168 168 200 200 248 248 267 267 267
Tile thickness 12mm (nominal) 200 248 35 26735 167 167
168 267 87 87 167
200 248 267 35 267
118
Cover width 168mm (nominal) 168 35 118 267 267 87 267
168 200 248 267 167
200 200 118
35 87 167
Covering capacity (net) 60 tiles/m2 at 100mm gauge (roof) 53 tiles/m2 at 115mm gauge (vertical) 168 168 168 200 248 248 248 267 267 267 118 35 35 35 87 167 167 167
118 87 87 87
Weight of tiling (approx.) 73.8kg/m2 (0.72 kN/m2) at 100mm gauge (roof) 58kg/m2 (0.57 kN/m2) at 115mm gauge (vertical) 118 118
Plain eaves/top tile Plain tile-and-a-half Internal angle 118 External angle
Battens required (net) 10.0 lin.m/m2 at 100mm gauge (roof) 8.7 lin.m/m2 at 115mm gauge (vertical) Left and right hand available Left and right hand available
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) 178 90°, 120°, 135°
178
Tile nails 38mm x 2.65mm 178 60 315
267 60
Authority BS EN 490 267 178 315
267 178 60 315
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. 178 60178 178 315
267 60 315 300
267 60 60 300 273
267 267 60 315 315 315 338
267 208 300 273
338
Sustainability Product information 208 113
275 300
285 338 273
208 275 300 273
113 285 300 300 338300
Tile camber 273

208 275 285 338
A+ rated in the BRE Green Guide (based on 208 113 338 338 273 273
Single camber Cloak verge tile 275
Valley 285 Bonnet hip 338
generic rating for UK produced concrete plain tiles 208
208 113 208 275 tile 285 Arris hip
113 Left and right hand available 35-50°
275 275 285 35-40°
285 35-50°
Element Refs: 812410017, 812410050, 812410064) 113 113 275 285
113
 BES 6001 (Responsible Sourcing) certified

 Carbon footprint measurement Compatible with clay feature tiles
For advice on the use of Feature Verges, ridges and hips
tiles in main roof areas contact For ridges and hips compatible with
† Made to order
concrete plain tiles, see page 52.
Club† Bullnose†

Edgemere
Roof coverings | Concrete interlocking tiles

A clean and precise slate-like appearance is
enhanced by the thin leading edge and the
broken bond laying technique.
Colour availability Key (S) Smooth finish
Smooth Brown (S) Smooth Grey (S) Old English Dark Red (S)
Technical data
Size of slate 420mm x 330mm
17.5° (100mm headlap)
Maximum pitch 90°
Minimum headlap 75mm (22.5° and above)
100mm (below 22.5°)
Maximum gauge 345mm
Hanging length 395mm (nominal)
Covering capacity (net) 9.7 slates/m2 (0.43 kN/m2) at 75mm headlap
10.5 slates/m2 (0.47 kN/m2) at 100mm headlap
Weight of slating (approx.) 44kg/m2 (0.43 kN/m2) at 75mm headlap
Battens required (net) 2.9 lin.m/m2 at 75mm headlap
3.1 lin.m/m2 at 100mm headlap
Fixings 45mm x 3.35mm slate nails
Fixing clips Eaves, verge and slate clips
Authority BS EN 490
Concrete interlocking
Sustainability Edgemere half slate

tiles and fittings

rating for UK produced concrete interlocking tiles
Element Refs: 812410007, 812410018, 812410049)
Available in all colours to match main tiles.
Edgemere should be laid
broken bond. The required 330
broken bond pattern is
 BES 6001 (Responsible Sourcing) certified created by the introduction
420
 Carbon footprint measurement of half slates, to form verges

in alternate courses. Purpose
Mendip interlocking tiles, Mosborough Red, Dog Rescue Centre, Blidworth made half slates are available
and can be formed on site by
cutting along the scoreline.

Duo Edgemere Riven Edgemere

A thin leading edge interlocking slate designed A thin leading edge interlocking slate with the addition of a riven
to look like and blend in with small format slates. surface, providing a more natural appearance with variegated
look, depth and tone.
Colour availability Key (S) Smooth finish Colour availability Key (S) Smooth finish
Smooth Grey (S) Old English Dark Red (S) Smooth Grey (S)

Minimum pitch* 22.5° (75mm headlap) Minimum pitch* 22.5° (75mm headlap)
17.5° (100mm headlap) 17.5° (100mm headlap)
Minimum headlap 75mm (22.5° and above) Minimum headlap 75mm (22.5° and above)
100mm (below 22.5°) 100mm (below 22.5°)
Maximum gauge 345mm Maximum gauge 345mm
Tile thickness 18mm (nominal) Tile thickness 18mm (nominal)
Hanging length 395mm (nominal) Hanging length 395mm (nominal)
Covering capacity (net) 9.7 slates/m2 (0.43 kN/m2) at 75mm headlap Covering capacity (net) 9.7 slates/m2 (0.43 kN/m2) at 75mm headlap
10.5 slates/m2 (0.47 kN/m2) at 100mm headlap 10.5 slates/m2 (0.47 kN/m2) at 100mm headlap
Weight of slating (approx.) 44kg/m2 (0.43 kN/m2) at 75mm headlap Weight of slating (approx.) 44kg/m2 (0.43 kN/m2) at 75mm headlap
47.5kg/m2 (0.47 kN/m2) at 100mm headlap 47.5kg/m2 (0.47 kN/m2) at 100mm headlap
3.1 lin.m/m2 at 100mm headlap 3.1 lin.m/m2 at 100mm headlap
Fixing 45mm x 3.35mm slate nails Fixing 45mm x 3.35mm slate nails
Fixing clips Eaves, verge and slate clips Fixing clips Eaves, verge and slate clips
Sustainability Laying Duo Edgemere Sustainability Laying Riven Edgemere

Duo Edgemere should be laid quarter bond. The required Riven Edgemere should be laid broken bond. The required

quarter bond pattern is created by the introduction of

broken bond pattern is created by the introduction of half
three-quarter width slates, cut from standard slates on site width slates, cut from standard slates on site to form verges
Element Refs: 812410007, 812410018, 812410049) Element Refs: 812410007, 812410018, 812410049)
to form verges in alternate courses. in alternate courses.
 BES 6001 (Responsible Sourcing) certified  BES 6001 (Responsible Sourcing) certified
 Carbon footprint measurement  Carbon footprint measurement
40 41
Modern Duo Modern

A flat, smooth, single lap interlocking design, A flat, smooth, single lap, interlocking tile with
whose appearance is enhanced by the required a ‘mock bond’ joint is enhanced by the required
broken bond laying pattern. broken bond laying technique.
Colour availability Key (G) Granular finish (S) Smooth finish Colour availability Key (S) Smooth finish
Anthracite (S) Smooth Grey (S) Antique Brown (G) Old English Dark Red (S) Smooth Grey (S)
Technical data
17.5° (100mm headlap)
Smooth Brown (S) Old English Dark Red (S) Mosborough Red (S) Maximum pitch 90°
Minimum headlap 75mm
Maximum gauge 345mm
Technical data
Minimum pitch* 22.5° Smooth (75mm headlap) 30° Granular (75mm headlap)
17.5° Smooth (100mm headlap) 25° Granular (100mm headlap) Hanging length 397mm (nominal)
Maximum pitch 90° Covering capacity (net) 9.9 tiles/m2 at 75mm headlap 10.7 tiles/m2 at 100mm headlap
Minimum headlap 75mm Weight of tiling (approx.) 50kg/m2 (0.49 kN/m2) at 75mm headlap 54kg/m2 (0.53 kN/m2) at 100mm headlap
Maximum gauge 345mm Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap
Tile thickness 30mm (nominal) Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)
Hanging length 397mm (nominal)
Covering capacity (net) 9.9 tiles/m2 at 75mm headlap 10.7 tiles/m2 at 100mm headlap
Authority BS EN 490
Weight of tiling (approx.) 50kg/m2 (0.49 kN/m2) at 75mm headlap 54kg/m2 (0.53 kN/m2) at 100mm headlap
Sustainability Laying Duo Modern
Duo Modern should be laid quarter bond. The required
Fixing clips
Authority
Eaves, verge and tile clips
BS EN 490
quarter bond pattern is created by the introduction of
three-quarter width tiles, cut from standard tiles on site
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. Element Refs: 812410007, 812410018, 812410049)
to form verges in alternate courses.

Sustainability Modern fittings  Carbon footprint measurement

 Arating
for UK produced concrete interlocking tiles Modern should be laid broken Modern
Element Refs: 812410007, 812410018, 812410049) 330 Half Tile
bond. The required broken
bond pattern is created by 420
 BES 6001 (Responsible Sourcing) certified the introduction of half tiles,
 Carbon footprint measurement to form verges in alternate

courses. Purpose made half
slates are available and can be
formed on site by cutting along
the scoreline.
Double Roman Mendip

A 2000 year old profile with precision-engineered A double pantile design with elegant flowing lines,
functionality. providing instant visual appeal.
Colour availability Key (G) Granular finish (S) Smooth finish Colour availability Key (G) Granular finish (S) Smooth finish
Old English Dark Red (S) Mosborough Red (S) Dark Red (G) Old English Dark Red (S) Mosborough Red (S) Dark Red (G)
Antique Brown (G) Smooth Brown (S) Smooth Grey (S) Greystone (G) Antique Brown (G) Smooth Brown (S) Smooth Grey (S) Anthracite (S)

Minimum pitch* 25° Smooth (75mm headlap) 30° Granular (75mm headlap) Minimum pitch* 17.5° Smooth (75mm headlap) 30° Granular (75mm headlap)
22.5° Smooth (100mm headlap) 15° Smooth (100mm headlap) 25° Granular (100mm headlap)
Minimum headlap 75mm Minimum headlap 75mm
Maximum gauge 345mm Maximum gauge 345mm
Body thickness 28mm (nominal) Body thickness 27mm (nominal)
Profile depth d > 20mm Profile depth d > 20mm
Overall depth 53mm Overall depth 59mm
Hanging length 397mm (nominal) Hanging length 397mm (nominal)
Covering capacity (net) 9.7 tiles/m2 at 75mm headlap 10.4 tiles/m2 at 100mm headlap Covering capacity (net) 9.7 tiles/m2 at 75mm headlap 10.5 tiles/m2 at 100mm headlap
Weight of tiling (approx.) 44kg/m2 (0.43 kN/m2) at 75mm headlap 47kg/m2 (0.46 kN/m2) at 100mm headlap Weight of tiling (approx.) 46kg/m2 (0.45 kN/m2) at 75mm headlap 49kg/m2 (0.48 kN/m2) at 100mm headlap
Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap
Tile nails 65mm x 3.35mm Tile nails 70mm x 3.35mm
Fixing clips Eaves, verge and tile clips Fixing clips Eaves, verge and tile clips
Sustainability Sustainability Extended rafter lengths

Mendip interlocking tiles can now perform at extended rafter

lengths as follows:
Element Refs: 812410007, 812410018, 812410049) Element Refs: 812410007, 812410018, 812410049) • 15 - 17.5° pitch with a rafter length up to and including 15m
will require a 100mm headlap.
 BES 6001 (Responsible Sourcing) certified  BES 6001 (Responsible Sourcing) certified • 17.5° pitch and above with a rafter length up to and including
 Carbon footprint measurement  Carbon footprint measurement 15m will require a 75mm headlap.
44 45
Ludlow Major EcoLogic Ludlow Major

Simple, strong lines exploit the interplay between The unique EcoLogic coating applied to the Ludlow Major tile,
light and shade. removes nitrogen oxides and other pollutants from the atmosphere.
The tile also includes much higher levels of recycled content.
Colour availability Key (G) Granular finish (S) Smooth finish Colour availability EcoLogic composition
01
02
03
Old English Dark Red (S) Mosborough Red (S) Dark Red (G) Nimbus Grey (G)
Key (G) Granular finish

01 Photocatalytic granules stimulated by sunlight to remove NOx
02 Photocatalytic pigmented slurry adhesive
03 Concrete body containing nearly 50% recycled material
Antique Brown (G) Smooth Brown (S) Smooth Grey (S) Greystone (G)

Minimum pitch* 25° Smooth (75mm headlap) 30° Granular (75mm headlap) Minimum pitch* 30° (75mm headlap)
22.5° Smooth (100mm headlap) Maximum pitch 90°
Maximum pitch 90° Minimum headlap 75mm
Minimum headlap 75mm Maximum gauge 345mm
Maximum gauge 345mm Body thickness 25mm (nominal)
Body thickness 25mm (nominal) Profile depth d > 11mm
Profile depth d > 11mm Cover width 295mm (nominal)
Cover width 295mm (nominal) Hanging length 399mm (nominal)
Hanging length 399mm (nominal) Covering capacity (net) 9.8 tiles/m2 at 75mm headlap 10.6 tiles/m2 at 100mm headlap
Covering capacity (net) 9.8 tiles/m2 at 75mm headlap 10.6 tiles/m2 at 100mm headlap Weight of tiling (approx.) 45kg/m2 (0.44 kN/m2) at 75mm headlap 49kg/m2 (0.48 kN/m2) at 100mm headlap
Weight of tiling (approx.) 45kg/m2 (0.44 kN/m2) at 75mm headlap 49kg/m2 (0.48 kN/m2) at 100mm headlap Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap
Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534) 50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) Tile nails 55mm x 3.35mm
Tile nails 55mm x 3.35mm Fixing clips Eaves, verge and tile clips
Fixing clips Eaves, verge and tile clips Authority BS EN 490
Authority BS EN 490
Sustainability
Sustainability
 Arating

 Arating
for UK produced concrete interlocking tiles

Element Refs: 812410007, 812410018, 812410049)
Element Refs: 812410007, 812410018, 812410049)
 Carbon footprint measurement
 High level of recycled content
46 47
Ludlow Plus Wessex

Ideal for refurbishment applications, where its smaller Designed to shed water efficiently at pitches down to 15°, the
format reduces wastage. Wessex has clean, simple lines with a pleasing minimalist style.
Greystone (G) Smooth Grey (S) Antique Brown (G)
Smooth Brown (S) Smooth Grey (S)
Technical data
Smooth Brown (S) Old English Dark Red (S) Dark Red (G) Minimum pitch* 15°
Maximum pitch 44°
Technical data Minimum headlap 75mm

Maximum gauge 345mm
Body thickness 29mm (nominal)
Minimum pitch* 25° Smooth (75mm headlap) 30° Granular (75mm headlap)
22.5° Smooth (100mm headlap) Profile depth d > 20mm
Maximum pitch 90° Overall depth 56mm
Minimum headlap 75mm Cover width 298mm (nominal)
Maximum gauge 312mm Hanging length 403mm (nominal)
Body thickness 25mm (nominal) Covering capacity (net) 9.7 tiles/m2 at 75mm headlap 10.5 tiles/m2 at 100mm headlap
Profile depth d > 11mm Weight of tiling (approx.) 50kg/m2 (0.49 kN/m2) at 75mm headlap 53kg/m2 (0.52 kN/m2) at 100mm headlap
Cover width 204mm (nominal) Battens required (net) 2.9 lin.m/m2 at 75mm headlap 3.1 lin.m/m2 at 100mm headlap
Hanging length 361mm (nominal) Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)
Covering capacity (net) 15.7 tiles/m2 at 75mm headlap 17.1 tiles/m2 at 100mm headlap
Weight of tiling (approx.) 47kg/m2 (0.46 kN/m2) at 75mm headlap 51kg/m2 (0.50 kN/m2) at 100mm headlap
Authority BS EN 490
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534) * The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
Tile nails 50mm x 3.35mm Sustainability
Authority BS EN 490

 Arating
Element Refs: 812410007, 812410018, 812410049)
Sustainability  BES 6001 (Responsible Sourcing) certified

 Arating
+ rated in the BRE Green Guide (based on generic  Carbon footprint measurement
Element Refs: 812410007, 812410018, 812410049)

48 49
Anglia Ashmore

A single lap interlocking concrete tile with the classic A single lap, interlocking double plain tile, with the engineered
clay pantile profile and a bullnosed leading edge design. precision and ease of installation of an interlocking tile.
Old English Dark Red (S) Smooth Grey (S) Antique Brown (G) Old English Dark Red (S) Smooth Grey (S) Smooth Brown (S)

Minimum pitch* 30° Smooth (75mm headlap) 30° Granular (75mm headlap) Minimum pitch* 25° (77mm headlap) 22.5° (92mm headlap)
25° Smooth (100mm headlap) Maximum pitch 90°
Maximum pitch 90° Minimum headlap 77mm
Minimum headlap 75mm Maximum gauge 190mm
Maximum gauge 312mm Tile thickness 16mm (nominal)
Body thickness 30mm (nominal) Cover width 302mm (nominal)
Profile depth d > 20mm Hanging length 235mm (nominal)
Overall depth 71mm Covering capacity (net) 17.5 tiles/m2 at 77mm headlap 19 tiles/m2 at 92mm headlap
Cover width 204mm (nominal) Weight of tiling (approx.) 48kg/m2 (0.47 kN/m2) at 77mm headlap 52kg/m2 (0.51 kN/m2) at 92mm headlap
Hanging length 370mm (nominal) Battens required (net) 5.3 lin.m/m2 at 77mm headlap 5.8 lin.m/m2 at 92mm headlap
Covering capacity (net) 15.7 tiles/m2 at 75mm headlap 17.1 tiles/m2 at 100mm headlap Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)
Weight of tiling (approx.) 47kg/m2 (0.46 kN/m2) at 75mm headlap 51kg/m2 (0.50 kN/m2) at 100mm headlap 50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)
Battens required (net) 3.2 lin.m/m2 at 75mm headlap 3.5 lin.m/m2 at 100mm headlap Tile nails 45mm x 3.35mm
Batten size recommended 38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534) Fixing clips Eaves, verge and tile clips
50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534) Authority BS EN 490
Authority BS EN 490
* The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service. Sustainability Ashmore fittings

 A(based
+ rated in the BRE Green Guide
on generic rating for UK Ashmore tiles should be laid broken bond. The required broken bond pattern
Sustainability produced concrete interlocking is created by the introduction of three-quarter width tiles in alternate courses.
tiles Element Refs: 812410007,
 Arating
+ rated in the BRE Green Guide (based on generic Tile-and-a-half tiles are available for use at hips and valleys.
812410018, 812410049)
Element Refs: 812410007, 812410018, 812410049)

BES 6001 (Responsible Sourcing)
certified
 Carbon footprint measurement 484
 Carbon footprint measurement 260 267
260
224
267
267
224
260
267
267
484
267224 267
267
4
Ashmore three Ashmore three Ashmore

quarter tile (LH) quarter tile (RH) tile-and-a-half

162
162
Concrete fittings
Roof coverings | Shingles

88 88 298
457 457 457
298 248 248
457 160
160
160 160
Verges, ridges and hips 160 160 160
Available in a range of colours to match main tiles. Recommended

91 roof pitch may vary 91 247
457 457 457
depending on product and system91used, please contact the91Technical
248 Advisory Service.
247 248
247
457 91 457 91
457 75.5
91 247 91 457 91 457 247 70
9191 91
248 265
248
91 § Compatible
457 with Marley Eternit Universal HipFast. 247
457 457
247
† Compatible248
with Marley Eternit ventilated dry ridge
248 system.
457
65
457325
457 457
248
248 457 457 248248 457 457457 457 248 457 248 150 150
457 300 219
* Compatible with248
Marley Eternit Universal RidgeFast. ‡ Compatible with Marley Eternit dry hip system.
160
162
160 160
135 160 160162
420 420 160160 162 162
420 162 162 160
162
162 162 162
91 91 247
91 91 91
162 91 88247 247 457 298457 457
247 248 88 248
91 91
457 91 457 91
457 457457 247 457 457 457
357 337 457
91 91 248 247247 298
181 457248 248 457 457
255248
248 457 457298 248 457
57 457457 248 248 88457 248 248 88
88 298 107 122
248 457 457 457 457 88 91 84 457 91 298 247 457
88 248298 248 298 248 88 457 88 457 457 457 450
Cloak verge 88 298 Modern ridge†‡* Modern security248 ridge Segmental ridge†* 248
457 Modern265 457
mono ridge 457 248 300 457
457 457
218
457 457
298 298
457 457 248
88
248 Modern, Mendip and248 88
88 15-55°298
dry ridge 15-45° bedded 248 15-55° dry ridge 248 bedded
15-45° 162
457
457Double Roman457 457 457457 457 457 150
162
248 248 162
248
(see page 68) 162 162
457 162
162162
162 162 162
162 162 162
88 160 88 298
162
88 88 88 88 298 298 298 457 457
75.5 457
88 298 265
88 298 88 457 88 65 248 298 70 248
457 457 457 457
325 457 457
88
298 248 298 248
457 248 457 457 248
457 247 457 457 75.5 457 300 219
57 88265 248 248 248 248 70 150 75.5
298 457457 265 45765
457
325 457 70 150 457 298
248248 457 265 150 457 75.5
65
457
325 300 88
219 70
88 75.5 457
70 65 300 457 219 457 457
65 457 91325 457 247 457 150
150 325150 248 248 457
457 457 457 457
Segmental 300 135 457 219 Segmental
Segmental 298 mono
457 Modern mono 1/3 round hip tile‡§ 300 219
150 248 150 150 150
security ridge mono ridge† 75.5end ridge
75.5block block end ridge 17.5-45° dry ridge
5 65
135 70 70 135 457
325 bedded
325 15-50° 15-55° dry 300
ridge 15-55°
219 dry ridge 457 457 15-45° bedded
300 135 219
150
150 150
162
255 75.5
265 65 70 122
75.5 75.5325107 457
265
255 457
70 7084 300 219 457
265 65 255 65 70 325 70 457 75.5 457150 75.5
457 122 457 450
325 65 150
70 457457 6575.575.5 84 150
325 325 300 107
265 219 300 457300
107 219
457 457 122 218
70457 457 457 150 150
255
457457150 457 84 300150 219 450
300 219 457
5
300300 107 219219
150
265150 457 122
150457 265 150
300 84 457 218 107450 70
122
457 75.5
84 135 265 457 300 65 218 457
150150457
88 298 450 457 325 450
300
65 150135 300 218 265 457 300 218 219
457
135 135 457 150 457 150 150
248 150 162
Segmental block Modern block 90° Angle ridge/hip 125° Angle ridge hip Pascoll roll
84 107 122 122 135
end ridge* 107 162 end ridge*450 45-50° bedded 457 457 15-25° baby ridge
457 457
15-55° dry ridge 300 450ridge
15-55° dry 218
162
Security 125° Angle 15-45°
65 300 218 162
Also available:
255
Security 90° Angle ridge/hip 15-25°
255 107 122
247 ridge/hip 45-50° 457 107 Also 122 84
available: 457
5 255
107457 122
457 450
457 247 84 457 84 145° Angle 122
265
ridge hip 457 122 457
300 218
457 457 84 457
84 107
457 107
450 450 457 457
247122122 457265
107107 265
457 457457 150
300 255 450
300 450
21815-22.5° 218
450450 265 265 247457457 300 300 218 218 122
Security
457 145° Angle 107
150 300300150 150 218218 457 84
457 450 457
ridge/hip 15-22.5°
75.5 265 300 218
Shingles
70 162
25 457
162 300 162219 150
150 162 162
1/2 round baby ridge Ridge vent terminal Gas vent ridge terminal
162
15-55° 15-55° dry ridge 15-55° dry ridge
247
247 Also available: Gas vent457
ridge
247 247 for condensing boilers
457 457
457 457 Modern ridge 15-55°
Segmental ridge24715-55°
457
107 122
450 457
7
300
More
218
about our roof systems
330 420offer the most comprehensive
We 330 420 on the
roof system
20 JB Shingles, Lodge Cottage
market, underwritten by a 15 year warranty.
www.marleyeternit.co.uk/roofsystems

JB Shingles JB Shakes

A truly renewable and sustainable roofing and cladding material. Premier No. 1 Grade Blue Label Western Red Cedar Shake for
roofing and cladding.

Length 400mm Length 600mm
Width 75-350mm (random) Width 75-300mm (random)
Pitch and gauge 14-21° at 95mm gauge (roof) 75 -90° at 190mm gauge (vertical) Pitch and gauge 20 - 89° at 190mm gauge (roof)
22-74° at 125mm gauge (roof) 90° at 290mm gauge (roof)
Thickness 10mm at the butt, tapering Thickness 19mm at the butt, tapering
Covering (bundle) 1.73m2 at 95mm gauge (roof) 3.2m2 at 190mm gauge (vertical) Covering (bundle) 1.39m2 at 190mm gauge (roof)
2.28m2 at 125mm gauge (roof) 2.12m2 at 290mm gauge (roof)
Laid weight (approx.)* 8.1kg/m2 at 95mm gauge (roof) 4.0kg/m2 at 175mm gauge (vertical) Laid weight (approx.)* 9.4kg/m2 at 190mm gauge (roof)
6.1kg/m2 at 125mm gauge (roof) 6.1kg/m2 at 290mm gauge (roof)
Battens required (net) 10.5 lin.m/m2 at 95mm gauge (roof 5.3 lin.m/m2 at 175mm gauge (vertical) Battens required (net) 5.3 lin.m/m2 at 190mm gauge (roof
8.0 lin.m/m2 at 125mm gauge (roof) 3.5 lin.m/m2 at 290mm gauge (roof)
Fixings JB ShingleFix - S16x38mm stailess steel staples Fixings Silicon Bronze nails - 45x2.65mm
Silicon Bronze nails - 31x1.8mm Authority Canadian Shingles & Shakes Bureau
Authority Canadian Shingles & Shakes Bureau
The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
The minimum recommended pitch and lap may be influenced by special circumstances, please contact the Technical Advisory Service.
*Laid weights shown are for ‘clean’, untreated shingles.
* Laid weights shown are for ‘clean’, untreated shingles.
54 55
Fixings
Roof coverings | Fixings

SoloFix Stainless steel fixings
Manufactured from Zial®, an integrated clip and nail Description Code No. Quantity
that is quick and simple to install. See page 72 for Ashmore clip and nail pack 30130 100
more information and best practice for fixing.
Profile Pack size 500

Code No.
Pack size 100
Code No.
Aluminium nail packs
Modern 30430 30440 Profile Code No. Pack No. Approx. count
Ludlow Major/EcoLogic 30430 30440 Plain 30348 25 793
Ludlow Plus 30430 30440 Anglia, Lincoln 30349 26 520
Edgemere range 30431 30441 Ludlow Plus, Modern, 30350 27 396
Mendip 30432 30442 Duo Modern
Wessex 30432 30442 Double Roman 30351 28 308
Double Roman 30433 30443 Mendip 30352 29 287
Anglia 30434 30444 Edgemere range, Ashmore, 30398 31 432
Lincoln 30432 30442 Melodie, Maxima,
Maxima 30433 30443 Ludlow Major/EcoLogic 30371 32 373
Melodie 30445 30445
Aluminium verge and eaves clip packs

The table below shows the quantities packaged together with the correct sized nail.
Profile Right hand verge clip & nail pack Left hand verge clip & nail pack Eave clip & nail pack
50 clips & nails 50 clips & nails 100 clips & nails
Code No. Code No. Code No.
Ludlow Plus 30290 30290 30277
Anglia 30284 30286 30274
Ludlow Major/EcoLogic 30287 30287 30277
Mendip 30288 30287 30276
Double Roman 30289 30290 30275
Wessex 30286 30286 30278
Modern 30290 30290 30273
Duo Modern 30290 30290 30273
Edgemere range 30263 30263 30297
Ashmore* 30263 30263 30297
Lincoln 30284 30286 30452
Maxima 30289 30290†, 30289‡ 30452*, 30455§
Melodie 30285 30285 30452*, 30455§
Fixings
* Clips only † For standard tile ‡ For verge tile § Nails only
Fibre cement slate fixings

Description Colour Quantity
Copper disc rivets – 1000
Copper nails – 1000
60mm x 14 gauge self-sealing screws Blue/Black 100
Slate hooks for low pitch Birkdale (150mm) – 500
Universal HipFast system (with concrete third round hip tiles and Ashmore Old English Dark Red interlocking tiles), Windsor
56 57
Mortar bedded security kits
Roof coverings | Profiled sheeting

See page 72 for more information.
Mortar bedded Mortar bedded

security ridge security hip
Mechanical fixing system for Mechanical fixing system for
mortar bedded ridge tiles, mortar bedded hip tiles, helping
helping house builders and house builders and contractors
contractors meet British meet British Standards and
Standards and NHBC guidelines. NHBC guidelines.
Mortar bedded security ridge kit Mortar bedded security hip kit
(illustrated above) 54365 (illustrated above) 54366
- 10 No. batten brackets - 6 No. batten brackets
- 13 No. clamps - 13 No. clamps
- 13 No. 75mm x 4.8mm s/s screws - 13 No. 75mm x 4.8mm s/s screws
- 40 No. 25mm x 2.65mm s/s ARS nails - 40 No. 25mm x 2.65mm s/s ARS nails
100mm x 4.8mm deep ridge 70000 Tile tail clip pack 43602
screw pack (for clay half Tile head clip pack 43604
round ridge with profiled tiles)
100mm x 4.8mm deep ridge 70000
screw pack (for clay third
round hips with profiled tiles)
Secret cut tile clip pack 43607
Watch a quick video on mortar Watch a quick video on mortar

bedded mechanical fixing at bedded mechanical fixing at
marleyeternit.co.uk/securityridge marleyeternit.co.uk/securityhip
or scan the QR code below or scan the QR code below
Profiled
More about our dry fix systems
Our website contains a wealth of information about dry
sheeting
fix and ventilation solutions, including the Universal
range, which not only works with our roof tiles and
slates, but those of other manufacturers too:
www.marleyeternit.co.uk/dryfix
Profile 6, Torran Bay hostel, Ford
58 59
Profiled sheeting

We are the only UK manufacturer of fibre cement. We have been producing profiled Painted colour range
sheeting for over 90 years and offer a wide range of corrosion-resistant and low Experience gained over many years has shown that the standard Marley Eternit
maintenance systems across a wide range of sectors: commercial, residential, colour range will meet the majority of design requirements in both rural and urban
educational and agricultural. areas. All the colours have been chosen for their ability to harmonise with the most
commonly used building materials – brick, slate, stone, concrete and timber.
Tawny Brown Brown Van Dyke Brown Gunmetal Grey
Laurel Green Blue Cloud Grey Black
* Matt finishes
Sherwood* Bracken*
Natural Grey Farmscape Anthracite

Natural Grey is the standard unpainted Anthracite sheets have a pigmented surface
finish for Profile 6 and Profile 3. layer. Together with subtle variations in tone
inherent in any natural cementitious product,
the appearance will blend with almost any
landscape from the day the building is erected.
Natural Grey
Anthracite
60 61
System selector
Detailing | Dry fix and ventilation systems

Clay plain tiles
Lincoln
Maxima
Melodie
Concrete plain tiles
Fibre cement slates
Edgemere range
Modern / Duo Modern
Double Roman
Mendip
Ludlow Major / EcoLogic
Wessex
Ludlow Plus
Anglia
Ashmore
Universal roofing accessories
10mm eaves vent system               
25mm eaves vent system               
Dry verge          
HipFast               
RidgeFast               
Tile vent           
GRP dry valley system              
Ridge Roll for fibre cement slates 
Underlays               
Dry verge systems

Cloak verge system   *  
Slate verge trim 
Edgemere dry verge 
Ashmore dry verge   
Dry hip systems

Dry hip system          
Dry hip with duo pitch ridges 
Dry valley systems

Plain tile valley  
GRP interlocking slate dry valley system 
Ventilated dry ridge

Ventilated dry ridge           
Ventilated mono dry ridge           
Dry fix and

Fibre cement ventilated ridges 
Abutment systems
ventilation systems
Top abutment ventilation system            
Dry fix soakers      
Ventilation terminals
Gas vent ridge terminals
        
Ridge vent terminals
          
In-line vents and contour vents 
          
Tile vent terminals
     
New Universal dry verge system
Ventilation roof tile 
Ridge vent for condensing boiler           
Bonding gutters               
62 * Suitable for Modern only 63
Universal roofing accessories

Suitable for use with Marley Eternit roofing products and those of other manufacturers.†
10mm/25mm eaves vent Dry verge (NEW) HipFast RidgeFast Tile vent GRP dry valley
Designed to provide low level The brand new Marley Eternit Simple and rapidly installed Simple and rapidly installed Suitable for roof void ventilation Mortar free solution suitable for
ventilation to roof voids in Universal Dry Verge system has ventilated dry hip system, ventilated dry ridge system and connection to 110mm use with concrete interlocking
an efficient and unobtrusive been designed to make verge compatible with all tiles and providing 5mm continuous ridge soil/mechanical extraction. tiles/slates and concrete/clay
manner for roof pitches from detailing secure, BS 5534- slates up to 45° (suitable up to ventilation and compatible with Compatible with large format plain tiles. Suitable on rafter
12.5-55°. For all tiles and slates. compliant and elegantly simple. 60° subject to tile/slate profile all tiles and slates from 15-60° interlocking tiles and roof pitches from 17.5-60° and
and hip tile type). dependent on circumstances*. pitches 20° and above. accommodates up to 20° pitch
difference either side of valley.
Universal 10mm eaves 46350 Dry verge system Universal HipFast system 53400 Universal RidgeFast 53300 Universal Tile vent
vent system (6m pack) 28 No. left hand units 391* (6m pack) system (6m pack) Grey 36700
- 6m eaves rafter roll 28 No. right hand units 392* - 6m length hip roll - 6m length ridge roll Brown 36703 Universal GRP dry valley
- 10 No. felt support tray Fixing kit (also available) 53931 - 6 No. batten brackets - 10 No. ridge batten brackets Terracotta 36704 (3m lengths)
- 6 No. strip ventilator low profile 30422
- 13 No. hip unions - 13 No. ridge union straps
End caps - 2 No. tapered filler units - 13 No. ridge union clamps Flexible pipe 39091 high profile 30421
Universal 25mm eaves 46351
vent system (6m pack) Modern ridge 394*
- 6m eaves rafter roll Segmental ridge 395* Fixing material RidgeFast roll applicator 33002
- 10 No. felt support tray Modern mono-ridge Left hand 408* - 24 No. tile head clips (optional)
- 6 No. strip ventilator Right hand 409* - 30 No. tile tail clips RidgeFast blanking tape 33001
Segmental mono-ridge Left hand 427* (optional)
Comb filler strip 30425 Hip support trays 34002
Right hand 428* 100mm x 4.8mm deep ridge 70000
Continuous rafter roll (2 x 6m) 46323 - 9 No. 715mm
Dry verge refurbishment kit 53580 screw pack (for clay half
Gutter spacers (20 No.) 46353 RidgeFast/HipFast 53303 round ridge with profiled tiles)
* Suffix with colour code 01 Grey, Union Packs
03 Brown, 04 Terracotta RidgeFast/HipFast 53303
100mm x 4.8mm deep ridge 70000 Union Packs
screw pack (for clay third * Contact Technical Advisory Service
round hips with profiled tiles) for more information
Secret cut tile clip pack 43607
Find out more at Find out more at

Find out more at Find out more at Find out more at
marleyeternit.co.uk/ridgefast marleyeternit.co.uk/tilevent
marleyeternit.co.uk/eavesvent marleyeternit.co.uk/dryverge marleyeternit.co.uk/hipfast
or scan the QR code shown or scan the QR code shown
or scan the QR code shown or scan the QR code shown or scan the QR code shown
64 † Check with the manufacturer to confirm compatibility with Marley Eternit systems. 65
Universal roofing accessories Dry fix and ventilation

Suitable for use with Marley Eternit roofing products and those of other manufacturers.†
Ridge roll Slate continuous Ashmore and plain Edgemere

Plain tile vent for fibre cement slates Underlays verge trim tile continuous dry verge dry verge system
Designed for natural, mechanical Simple and rapidly installed Marley Eternit Universal Fibre cement slate dry verge Ashmore and plain tile Compatible with Edgemere,
or soil pipe ventilation. Provides dry fix system providing 5mm underlays are high performance provides a mechanically fixed, continuous dry verge provides installed at a range of headlaps
10,000mm2 free area of continuous ridge ventilation. roof membranes which are zone durable, maintenance free verge a strong, weathertight and and rafter pitches from 17.5-45°
ventilation and suitable for Compatible with fibre cement 1-5 compliant, in accordance solution for rafter pitches maintenance-free verge that (suitable up to 55° when used
concrete and clay plain tile slates and ridges. with BS 5534. up to 55° with fibre cement meets the requirements of BS with the ‘steep pitch ridge batten
roof pitches 22.5° and above†. slates and natural slates. 5534. The system is fast and section’, see Dry ridge system).
simple to install and offers sleek,
Universal plain tile vent Ridge roll 33010 Universal vapour permeable Slate verge trim uninterrupted verges without the
Grey 45501 Fibre cement ventilated underlay (50 metre) MA33150 Fibre cement slates need for mortar.
Brown 45503 dry ridge (illustrated above) (3 metre) 42206
Red 45505 Duo pitch ridge EU_DUO** Universal non-breathable Ashmore and plain tile dry verge Verge units
Stop end for duo EU_DUOSE** underlay (45 metre) MA33145
Flexible pipe Verge section (3 metre) 38501 Left hand 381*
ID 110mm (sold separately) 39091 pitch ridge Fixing kit 38510 Right hand 382*
Mono ridge EU_MONO**
Pressure resistance values
Stop end for mono ridge Edgemere dry verge 53830
Pa (litres/sec airflow) 15 30 60 Left hand EU_MONO**LH fixing kit
Free air area Right hand EU_MONO**RH
10,000mm2 13.6 53.7 21 Ventilated ridge roll 33010 End caps
† Please note minimum pitch of tile will apply. ** enter the pitch of the roof. Edgemere ridge 384*
Modern mono-ridge Left hand 408*
Right hand 409*
Segmental mono-ridge Left hand 427*
Right hand 428*
Dry verge refurbishment kit 53580

* Suffix with colour code 01 Grey, 03 Brown

fix and ventilation solutions, including the Universal
slates, but those of other manufacturers too:
www.marleyeternit.co.uk/dryfix
66 † Check with the manufacturer to confirm compatibility with Marley Eternit systems. 67
Dry fix and ventilation

Cloak verge Ventilated GRP Slate Top abutment Ventilated
systems dry hip system valley system ventilation system Dry fix soakers dry ridge system
Provides a mechanically fixed, Suitable for all concrete tiles The GRP Valley for large format Designed to provide a totally An easy-to-install, lightweight Mechanically fixed, weathertight
durable, maintenance free verge when used in conjunction with tiles and Slate GRP Dry Valley dry fixed and weathertight top and highly affordable way to and mortar free solution providing
solution. Suitable up to 45° for Third round or Modern hip tiles for fibre cement slates are both abutment that is fast and simple reduce both the material and 5mm continuous ridge ventilation.
Mendip, Modern, Double Roman for roof pitches 15-45°. suitable for roof pitches from to install and at the same time labour costs associated with Suitable for concrete tiles and
tiles and 55° for plain tiles. 22.5° to 45°. provides ventilation at the apex lead at side abutments. fibre cement slates when used
of the abutment. on roof pitches up to 55°**.
Mendip cloak verge (illustrated above) Batten sections GRP valley for Batten sections Modern dry soakers Batten sections
Left hand 245 Low profile 43300 fibre cement slates 30578 Low profile 41101 Left hand MA30476 Low profile 41101
Right hand 246 High profile 43400 High profile 41201 Right hand MA30477 High profile 41201
Mendip half tile 147 Steep pitch (low profile) 41102 Steep pitch (low profile) 41102
Mendip fixing kit 54252 Steep pitch (high profile) 41202 Steep pitch (high profile) 41202
Fixing kits Edgemere dry soakers
Double Roman cloak verge CERTIFICATE No 93/2909 Lead support strip 42505
Low profile 54360 Left hand MA30474 Ridge unions
Left hand 265
High profile 54361 Fixing Kits 41000 Right hand MA30475 Segmental ridge union 413*
Right hand 266
Double Roman half tile 102 Modern ridge union 414*
Filler units† Ashmore dry soakers Modern/segmental
Double Roman fixing kit 54252 Hip tail clip pack 43602
Double Roman - vented 42105 adaptor ridge union 420*
Concrete plain tile cloak verge Left hand MA30472
Modern, Duo Modern, Right hand MA30473
Left hand 249 Ridge unions Edgemere - vented 41501 Fixing Kits
Right hand 250 Modern ridge union 4140* Ludlow Major/EcoLogic - vented 41601 Concrete tiles & slates fixing kit 41000
Segmental block end ridge 191 Ludlow Plus - vented 41508 Clay/concrete plain tile dry soakers
Third round hip union 4350*
Segmental mono block end ridge Mendip - vented 41701 Left hand MA30478 Filler units†
Wessex - vented 41901 Right hand MA30479 Double Roman - vented 42105
Left hand 189 Apex caps
Right hand 190 Anglia - vented 41506 Plain, Modern, Duo Modern,
Modern hip apex cap (15-24°) 4381* Edgemere - vented 41501
Modern cloak verge Fibre cement 41705 Fibre cement slate dry soakers
(25-35°) 4382* Double lap slates - vented 41703
Left hand 371 (36-45°) 4383* Left or right hand MA30480
Ludlow Major/EcoLogic - vented 41601
Right hand 370
Third round hip (15-24°) 4371* Ludlow Plus - vented 41508
Modern cloak verge half tile 372
apex cap (25-35°) 4372*
Bonding gutters Mendip - vented 41701
Modern fixing kit 37300
(36-45°) 4373* Wessex - vented 41901
Modern block end ridge 374 Easy-to-install, lightweight and Anglia - vented 41506
Modern mono block end ridge highly affordable way to reduce
Block end hip tiles Fibre cement 41705
Left hand 375 the need for mortar and lead Dry ridge set out gauge 41001
Right hand 376 Third round block end hip tile 291
Modern block end hip tile 292
at the junction between two
Clay plain tile cloak verge Apex caps
different roof coverings.
Left hand MAKE**ZLVTB * Suffix with colour code 01 Grey, 03 Brown, Segmental ridge junction 439*
Right hand MAKE**ZRVTB 04 Terracotta Modern ridge junction 440*
** Suffix with colour code: 001 Red Smooth, * Suffix with colour code 01 Grey, 03 Brown,
003 Red Sandfaced, 004 Heather Sandfaced,
High profile MA40471 04 Terracotta
006 Farmhouse Brown, 007 Grey Sandfaced, Low profile MA40470 ** For roof pitches over 35°, speak to the
009 Brindle, 031 Natural Orange, Marley Eternit Technical Advisory Service
033 Heather Blend, 034 Burnished, 113 Ashurst, † Where non-vented dry ridge is required,
122 Aylesham Mix, 140 Chailey, 141 Burford, use Blanking Tape (2 x 2m, code 33001)
142 Loxleigh, 402 Dark Heather, 403 Staffs Mix,
406 Staffs Blue, 408 Blue Smooth
68 69
Dry fix and ventilation

Ventilated Ridge vent Tile vent Fibre cement
dry mono ridge system terminals terminals Contour in-line vents Clay in-line vent slate in-line vent
Mechanically fixed, weathertight Suitable for natural soil, or Available in a wide range of Discreet high performance vent Real clay tile slips provide Provides visual integration on
and mortar free solution providing mechanical ventilation. Provides colours and finishes, provides terminals for high/low level roof visual integration on roof slope roof slope and 10,500mm2 free
5mm continuous ridge ventilation. high level ventilation for concrete for high/low level roof space space ventilation. Suitable for and 7,500mm2 free area of area of ventilation.
Suitable for concrete tiles and tiles (9,500mm2 free area), clay ventilation. Suitable for natural soil and mechanical ventilation. ventilation.
fibre cement slates when used plain tiles or fibre cement slates soil, or mechanical ventilation Minimum roof pitch 22.5°
on roof pitches up to 55°. (10,000mm2 free area). (except Ashmore)†. (except Plain tiles 35°).
Batten sections Ridge vent terminal Terminals (with spigot) Contour tile vents Clay in-line tile ventilator Fibre cement in-line slate ventilator
Low profile 41101 Illustrated above – for natural ventilation Mendip (illustrated above) 294 Mendip 452* MAKE**ZICVB (illustrated above)
High profile 41201 of the roof void apex and connection Edgemere 259 Ashmore 450* Clay in-line tile adaptor EU_UNIVSLATEVENT
Steep pitch (low profile) 41102 to mechanical ventilation systems. EU_INLINESLATEADAP
Modern 295 Plain 455*
Steep pitch (high profile) 41202 For concrete tiles 198 Flexible pipe 39091
Wessex 296 Edgemere 465*
Flexible pipe 39091
Ridge unions Ludlow Major/EcoLogic 297 Modern 451*
Gas vent ridge terminal ** Suffix with colour code: 001 Red Smooth,
Segmental mono-ridge union 423* Double Roman 298 Wessex 459*
for condensing boilers 003 Red Sandfaced, 004 Heather Sandfaced,
Ludlow Major/EcoLogic 456* 006 Farmhouse Brown, 007 Grey Sandfaced,
Fixing Kits Segmental 254
Flexible pipe 39091 Double Roman 453* 009 Brindle, 031 Natural Orange, 033 Heather
Concrete tiles & slates fixing kit 41000 Modern 255 Blend, 034 Burnished, 113 Ashurst,
Ludlow Plus 457* 122 Aylesham Mix, 140 Chailey, 141 Burford,
Filler units† Ventilation roof tiles Anglia 460*
142 Loxleigh, 402 Dark Heather, 403 Staffs
Gas vent ridge terminal Mix, 406 Staffs Blue, 408 Blue Smooth
Double Roman - vented 42105 (with catchment tray)
(concrete tiles)
Plain, Modern, Duo Modern, For connection to gas appliances Ashmore 263
Edgemere - vented 41501 of rated input of 60 Kw max. only Flexible pipe 39091
Double lap slates - vented 41703 (not suitable for gas condensing † Minimum pitch of tile will apply.
* Suffix with colour code 01 Grey, 03 Brown,
Ludlow Major/EcoLogic boilers or oil fired boilers). 05 Red
- vented 41601
Ludlow Plus - vented 41508 With extension piece 256
Mendip - vented 41701 Gasket set (spare) 30346
Wessex - vented 41901
Anglia - vented 41506 Plumbers accessory pack 39090
Fibre cement 41705 For full product codes, please speak to
Dry ridge set out gauge 41001 Customer Services on 08705 626400.
Apex caps
Top abutment support strip 42505
Top abutment fixing kit 41000 fix and ventilation solutions, including the Universal
* Suffix with colour code 01 Grey, 03 Brown,
04 Terracotta slates, but those of other manufacturers too:
† Where non-vented dry ridge is required,
use Blanking Tape (2 x 2m, code 33001) www.marleyeternit.co.uk/dryfix
70 71
Other BS 5534 solutions Resources
Detailing | Other BS 5534 solutions
Knowledge | Resources
BS 5534 is the British Standard for Slating and Technical advice Sales support
Tiling and provides the industry with guidance on Our Technical Advisory Service is Our Area Sales Managers have
staffed by a qualified team with in-depth knowledge of your local
best practice relating to the installation of roofs. specialist knowledge. area. They are available to visit your
Visit marleyeternit.co.uk or site to carry out a roof survey, and to
e-mail [email protected] offer specific solutions for both new
build and refurbishment projects.
Mortar can no longer A greater proportion Fixing instructions marleyeternit.co.uk/localcontacts
be used as the only of tiles must be clipped and literature
means of fixing under under BS 5534: 2014 Comprehensive sitework, fixing and Tilefix
BS 5534: 2014 installation literature and videos: Create instant fixing specifications
marleyeternit.co.uk/resources based on the geographical location
and building dimensions of specific
All current product and technical building projects.
literature can be downloaded: marleyeternit.co.uk/tilefix
marleyeternit.co.uk/downloads
Estimator
Samples A tool designed to create a complete
Samples of clay interlocking and plain bill of materials for your roofing project,
tiles, fibre cement slates and concrete based on a wide range of roof shapes:
Mortar bedded security kits SoloFix – the one-piece tiles are available on request. marleyeternit.co.uk/estimator
Where mortar bedding is required, clip and nail marleyeternit.co.uk/samples
Marley Eternit offers mortar bedded Training centre

Marley Eternit has launched SoloFix, Stockist information We have a purpose-built training
security ridge and hip kits. These a one-piece clip and To find details for stockists of Marley centre where we are able to impart our
provide installers with mechanical fixings nail for all standard Eternit products, visit: expertise through a range of practical
to secure ridge and hip units directly to interlocking tiles, marleyeternit.co.uk/stockists and classroom courses. To find out
the timber framework of the roof. providing an affordable
more about our courses, visit:
Marley Eternit head clip and tail clip fixing that not only Customer services marleyeternit.co.uk/training
packs provide an effective solution for installs up to 30% Knowledgeable and friendly staff are
faster than traditional clips, but delivers
mechanically fixing small tile cuts at both
outstanding strength and durability.
available to offer quotations, expert Health and Safety
the hip and valley. advice, deal with orders and all other In line with the requirements of the
To see how SoloFix performs enquiries. Health and Safety at Work Act, The
To view a short installation video
on both of our mortar bedded against traditional clips, watch Account customers call 08705 626400 Consumer Protection Act and The
security kits, please visit our roof installation race at Chemicals (Hazard Information and
marleyeternit.co.uk/solofix Non-account customers call Packaging for Supply) Regulations and
marleyeternit.co.uk/securityridge 01283 722588
or marleyeternit.co.uk/securityhip or scan the QR code below. the Control of Substances Hazardous
or scan the QR codes below. to Health Regulations, please
download and view copies of our
Cedral Lap, Rye, East Sussex
COSHH data sheets
at marleyeternit.co.uk/coshh
Ridge Hip
72 73
Minimum banded quantities
Knowledge | Minimum banded quantities
No. Bands Quantity No. Bands Quantity

Clay plain tiles per band per pallet per pallet Concrete tiles per band per pallet per pallet
Canterbury handmade tiles n/a n/a 860 Plain tiles 10 90 900
Canterbury handmade eaves n/a n/a 860 Plain eaves/top 10 120 1200
Canterbury handmade gables n/a n/a 560 Plain tile and half 10 54 540
Ashdowne tiles 11 105 1155 Anglia 12 38 456
Ashdowne eaves 15 100 1500 Ashmore 6 46 276
Ashdowne tile and a half 12 63 756 Double Roman, Mendip 6 32 192

& Wessex
Acme/Hawkins tiles 12 105 1260
Edgemere Range 6 40 240
Acme/Hawkins eaves 15 100 1500
Ludlow Major 6 36 216
Acme/Hawkins tile and a half 12 63 756
Ludlow Plus 12 43 516
Creasing tiles* 12 105 1260
Modern and Duo Modern 6 32 192

Concrete fittings
Lincoln tiles 4 88 352
Segmental ridge tiles 5 24 120
Lincoln LH verge tiles 4 88 352
Modern ridge tiles 5 28 140
Maxima tiles* 4 60 240
Maxima LH verge tiles 4 20 80

JB Red battens
Melodie tiles* 6 40 240
19 x 38mm** 10 70 700
Melodie LH verge tiles 6 20 120
19 x 50mm** 10 55 550
25 x 38mm** 10 56 560
Fibre cement slates
25 x 50mm** 10 44 440
600 x 300mm slates 15 72 1080
600 x 600mm doubles 10 30 300

Shingles
Thrutone 500 x 250mm 20 70 1400
Shingles*** 120 24 2880
Thrutone 500 x 250mm doubles 10 32 320
Shakes*** 44 20 880
Thrutone 600 x 300mm 12 90 1080
Zinc Grey / Graphite
Garsdale 600 x 300mm 15 60 900
Garsdale 600 x 600mm n/a n/a 300 * Available as full pallets only
** Minimum order - 4 packs
Vertigo* n/a n/a 1080 *** Bundle quantities are approximate
74
Marley Eternit’s extensive range of tiles, slates,
Manufacturing and
Introduction
Knowledge | Manufacturing and stocking locations

dry fix products, ventilation systems and
accessories has been successfully enhancing stocking locations
and protecting our roofs for over 100 years.
We want to make your project, or that of your client, as 1 Glasgow
straightforward and successful as possible, so we’re on Marley Eternit Ltd, Kirkintilloch Road,
hand to offer practical, experienced support in a range of Cadder, Bishopbriggs, Glasgow G64 2PY
useful ways. Open for collections
1
Mon-Thur: 6:30am - 3:00pm
This can be delivering urgent samples where and when Fri: 6:30am - 2:00pm
they’re needed, providing products that help you achieve
an A+ rating and gain credits for your buildings, supplying
2 Gainsborough
bespoke fixing specifications, offering complete dry fixed 2
Marley Eternit Ltd, Old Shipyard, 3
ventilation solutions and much more. Beckingham, Gainsborough DN21 1NG 4
In short, we’re here to support you in any way we can Open for collections
and we’re always happy to take some of the load off Mon-Fri: 9:00am - 11:00 and 5 6
14.00 - 16.00 7
your shoulders.
Trust Marley Eternit to take the hassle out of roofing.
If you ever need advice on any roofing related issue, 3 Keele Key
you can rely on our team to give you a helping hand. Marley Eternit Ltd, Ridgehill Drive,
Clay Clay (limited Fibre cement slate
Madeley Heath, Crewe, Cheshire CW3 9LY selection)
Call 01283 722588 Open for collections

Concrete Timber
Email [email protected] Mon-Fri: 7:30am - 4:00pm
4 Burton 6 Beenham
Marley Eternit Ltd, Lichfield Road, Marley Eternit Ltd, Grange Lane,
Branston, Burton upon Trent DE14 3HD Bath Road, Beenham, Reading RG7 5PU
Open for collections Open for collections
Mon-Thur: 7:00am - 3:00pm Mon-Fri: 7:00am - 3:30pm
Fri: 7:00am - 2:00pm
All factories certified to

ISO 9001, ISO 14001, 5 Bridgend 7 Wrotham*
OHSAS 18001
Marley Eternit Ltd, St Mary’s Hill, Marley Eternit Ltd, London Road,
Mynydd Ruthin, Bridgend, Wrotham, Kent TN15 7RW
Mid Glamorgan CF35 5DU Open for collections
Open for collections Mon-Fri: 7:30am - 4:00pm
Mon-Fri: 8:00am - 4:00pm
* Please note: clay tiles are only available for collection in full pallets.
This publication is based on the latest data available at the time of printing. Due to product changes, improvements and other
factors, the Company reserves the right to change or withdraw information contained herein without prior notice. For specific
applications users should refer to the Technical Advisory Service and relevant Standards and Codes of Practice for guidance.
The photography shown in the document should not necessarily be taken as recommendations of good practice. The printing
process restricts the exact representation of colours. For true colour reference, please request product samples.
2 75
CI/SfB (47) N
April 2017
Call
Email
Or visit
01283 722588
[email protected]
www.marleyeternit.co.uk
Roofing
Marley Eternit Lichfield Road Branston Burton upon Trent DE14 3HD product catalogue
Roofing product catalogue 1

2017 Roofing Product Catalogue PDF

Uploaded by

Copyright:

Available Formats

2017 Roofing Product Catalogue PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2017 Roofing Product Catalogue PDF

Uploaded by

Copyright:

Available Formats

CI/SfB

Call 01283 722588

Knowledge | Manufacturing and stocking locations

Call 01283 722588 Open for collections

All factories certified to

The Marley Eternit Roof System

Base Roof Detailing

For more information, visit www.marleyeternit.co.uk/roofsystems

Base layers | Battens

> Only kiln dried sideboards are used to ensure

Roof coverings | Product selector

Clay plain tiles

Rivendale Garsdale Birkdale Thrutone Vertigo

Clay interlocking tiles Concrete plain tiles

EcoLogic Ludlow Plus Wessex Anglia Ashmore

Roof coverings | Clay plain tiles

Colour availability Key (F) Fine sanded finish

Loxleigh (F) Burford (F) Chailey (F)

Sustainability Product information

Element Ref: 812410006)

 BES 6001 Responsible Sourcing certified

Canterbury handmade clay plain tile in mixed blend.

Roof coverings | Clay plain tiles

 Carbon footprint measurement Feature tiles

Element Ref: 812410006)

 BES 6001 Responsible Sourcing certified

Roof coverings | Clay plain tiles

Technical data Technical data

Sustainability Product information Sustainability Product information

Element Ref: 812410006) Element Ref: 812410006)

125 60 60† 305 185† 305 305 450 305305

Clay fittings and accessories

Roof coverings | Clay plain tiles

255 165 80 90 90 90 450

Clay fittings and accessories

Roof coverings | Clay interlocking tiles

265 265 265 265

248 248 290 248 248

185† 185 † 165

Clay interlocking tiles

305 305 305 305

Roof coverings | Clay interlocking tiles

Colour availability Key (SS) Semi-sanded finish (S) Smooth finish

Lincoln blockend hip

Technical data Lincoln fittings

Battens required (net)

> Universal RidgeFast system (page 65)

20 Note: All measurements in mm.

Roof coverings | Clay interlocking tiles

Colour availability Colour availability

Natural Red Natural Red

Technical data Technical data

Maxima fittings Melodie fittings

Left hand verge tile

22 Note: All measurements in mm. Note: All measurements in mm. 23

Clay interlocking tiles

Roof coverings | Fibre cement slates

fittings and accessories 162 160

248 457 248 457 457