Intravenous Fluid Therapy

Part o ne

Prepared by : Dr. Ahmed Kholeif

General Practitioner

Date : 12th January,2013

 Introduction
Can You Imagine life without water?
Of course not, because water is essential to sustain life.
Likewise, body fluids are vital to maintain normal body
functioning
Total body fluid (TBW), accounts for approximately 60% of
total body weight (this can be 70% or higher in a newborn
down to 50–55% in a mature woman).
Total Body Fluid can be divided into Intracellular and
Extracellular
 Intracellular Fluid
 2/3 of the total body water .
 Found inside the plasma membrane of
the body's cells. In humans (average 70
KG), the intracellular compartment
contains on average about 28 liters of
fluid .
 Extracellular Fluid
Accounts for 1/3 of the TBW, either:
Interstitial, Intravascular and 3rd space
1- Interstitial compartment
•It the small, narrow spaces between tissues or parts of an organ. It is
filled with what is called interstitial fluid
•When excessive fluid accumulates in the interstitial space, edema
develops. In the average male (70 kg) human body, the interstitial space
has approximately 10.5 liters of fluid ( 15% of the TBW)
Importance:
It acts as the microenvironment that allows movement of ions, proteins
and nutrients across the cell barrier .
 Extracellular Fluid

2-Intravascular compartment
•The main intravascular fluid in humans is
blood; the average volume of blood in humans
is approximately 70-75 ml/kg
 Extracellular Fluid
3- Third space
•The third space is space in the body where fluid does not
normally collect in larger amounts.
•For examples the peritoneal cavity and pleural cavity are major
examples of the third space.
•Small amount of fluid does exist normally in such spaces, and
function for example as lubricant in the case of pleural fluid .
 WATER
• Water is the body's primary fluid and is
essential for proper organ system functioning
and survival.
• People can live several days or even weeks
without food, but they cannot survive only a
few days without water .
 WATER
Water has many functions in the body !
Essential for Cell life .
Interfere in the Chemical and metabolic reactions .
Nutrients absorption and transport .
Regulate the Body temperature .
Elimination of waste products through urine .
 How much of you is water?
• Body muscle mass is rich in water, while Adipose Tissue has a
lower percentage of water content. That’s why:
• Overweight or obese people have a lower percentage of water
compared to someone who's lean and muscular.
• Women typically have a lower percentage of total body water
than men due to a higher percentage of body fat.
• Older adults tend to have a lower concentration of water overall,
due to an age-related decrease in muscle mass.
• Children tend to have a higher percentage of water weight-as
much as 70-80% in a full-term neonate.
 How much of you is water?
Input and Output of the “Normal” Adult
Minimal Obligatory Daily input:
500mL: Ingested water:
800mL: Water content in food
300mL : Water from oxidation :
TOTAL: 1600mL
Minimal Obligatory Daily water output:

• 500mL : Urine
• 500mL: Skin
• 400mL: Respiratory tract
• 200mL: Stool
• TOTAL : 1600mL
•On average, an adult input and output is 30-35mL/kg/day
(about 2.4L/day)
Water requirements increase with:
• Fever Sweating
• Burns Tachypnea
•Surgical drains Polyuria
•Gastrointestinal losses through Vomiting or diarrhea

Water requirements increase by 100 to 150 mL/day for each C degree of

body temperature elevation.
What are Solutes?
A substance dissolved in another substance
•There are many SOLUTES, for example:
 Plasma proteins (eg. albumin, globulins, fibrinogen)
Ions (sodium chloride, magnesium, calcium,
bicarbonates)
Food molecules (eg. glucose, amino-acids), waste
products as urea
What’s Osmolality?
Term refers to the solute concentration
in the body fluid by weight. The number
of milliosmols (mOsm) in a kilogram (kg)
of solution.
In humans normally the osmolality in
plasma is about 275-295 mOsm/Kg
 FLUIDTHERPY
Importance !
•Can be life-saving in certain conditions
•Loss of body water, whether acute or chronic, can cause a
range of problems from mild headache to convulsions, coma,
and in some cases, death.
•Though fluid therapy can be a lifesaver, it's never always
safe, and can be very harmful.
 Types of Fluid
The fluids used in clinical practice are usefully classified
into colloids, crystalloids and blood products
1.Colloid
Solutions that contain large molecules that don't pass
the cell membranes.
When infused, they remain in the intravascular
compartment and expand the intravascular volume and
they draw fluid from extravascular spaces via their
higher oncotic pressure
 Types of Fluid
2.Crystalloid
Solutions that contain small molecules that flow easily across
the cell membranes, allowing for transfer from the
bloodstream into the cells and body tissues.
This will increase fluid volume in both the interstitial and
intravascular spaces (Extracellular)
It is subdivided into:
* Isotonic
* Hypotonic
* Hypertonic
 Isotonic Fluids
When to consider a solution isotonic?

When the concentration of the particles (solutes) is

similar to that of plasma, So it doesn't move into cells
and remains within the extracellular compartment
thus increasing intravascular volume.
 Isotonic Fluids
Types of isotonic solutions include:
0.9% sodium chloride (0.9% NaCl)
lactated Ringer's solution
 5% dextrose in water (D5W)
Ringer's solution
 Isotonic Fluids
A- 0.9% sodium chloride (Normal Saline)

Solutions Na+ K+ Ca2+ Mg2+ Cl- HCO3- Dextrose mOsm/L

0.9% NaCl 154 154 308

Simply salt water that contains only water, sodium (154 mEq/L),
and chloride (154 mEq/L).
It's called "normal saline solution" because the percentage of
sodium chloride in the solution is similar to the concentration of
sodium and chloride in the intravascular space.
 A- 0.9% sodium chloride (Normal Saline)
When to be given?
1- to treat low extracellular fluid, as in fluid volume deficit from
- Hemorrhage - Severe vomiting or diarrhea - Heavy drainage from
GI suction, fistulas, or wounds
2- Shock
3- Mild hyponatremia
4- Metabolic acidosis (such as diabetic ketoacidosis)
5- It’s the fluid of choice for resuscitation efforts.
6- it's the only fluid used with administration of blood products.
B- Ringer's lactate or Hartmann solution
+ + 2+ 2+ - -
Solutions Na K Ca Mg Cl HCO3 Dextrose mOsm/L

Lactated
130 4 3 109 28 273
Ringer’s

ois the most physiologically adaptable fluid because its

electrolyte content is most closely related to the composition
of the body's blood serum and plasma.
o Another choice for first-line fluid resuscitation for certain
patients, such as those with burn injuries.
A- 0.9% sodium chloride (Normal Saline)
TAKE CARE:
Because 0.9% sodium chloride replaces
extracellular fluid, it should be used cautiously
in certain patients (those with cardiac or renal
disease) for fear of fluid volume overload.
B- Ringer's lactate or Hartmann solution

When to be used?
To replace GI tract fluid losses ( Diarrhea or vomiting )
Fistula drainage
Fluid losses due to burns and trauma
Patients experiencing acute blood loss or hypovolemia due to
third-space fluid shifts.
B- Ringer's lactate or Hartmann solution
Notice. Both 0.9% sodium chloride and LR may be used in many clinical situations, but
patients requiring electrolyte replacement (such as surgical or burn patients) will
benefit more from an infusion of LR.

- LR is metabolized in the liver, which converts the lactate to bicarbonate. LR

is often administered to patients who have metabolic acidosis not patients
with lactic acidosis
-Don't give LR to patients with liver disease as they can't metabolize lactate
- used cautiously in patients with sever renal impairment because it contains
some potassium
- LR shouldn't be given to a patient whose pH is greater than 7.5
C -Ringer's solution
Like LR, contains sodium, potassium, calcium, and
chloride in similar. But it doesn't contain lactate.
Ringer's solution is used in a similar fashion as LR, but
doesn't have the contraindications related to lactate.
D- Dextrose 5%
+ + 2+ 2+ - -
Solutions Na K Ca Mg Cl HCO3 Dextrose mOsm/L

D5W 50gm/l 278

It is considered an isotonic solution, but when the

dextrose is metabolized, the solution actually
becomes hypotonic and causes fluid to shift into
cells.
 D- Dextrose 5%
How does it work?
•D5W provides free water that pass through membrane pores to both
intracellular and extracellular spaces. Its smaller size allows the molecules
to pass more freely between compartments, thus expanding both
compartments simultaneously
•It provides 170 calories per liter, but it doesn't replace electrolytes.
•The supplied calories doesn't provide enough nutrition for prolonged
use. But still can be added to provide some calories while the patient is
NPO.
D- Dextrose 5%
Take Care !
- D5W is not good for patients with renal failure or cardiac problems since it
could cause fluid overload.
- patients at risk for intracranial pressure should not receive D5W since it
could increase cerebral edema
- D5W shouldn't be used in isolation to treat fluid volume deficit because it
dilutes plasma electrolyte concentrations
- Never mix dextrose with blood as it causes blood to hemolyze.
- Not used for resuscitation, because the solution won't remain in the
intravascular space.
- Not used in the early postoperative period, because the body's reaction to
the surgical stress may cause an increase in antidiuretic hormone secretion
Difference between NS and D5W in
distribution
Free ICF ECF Interstitial Intravascular
water
content
D5W 1000cc 660cc 340cc 226cc 114cc (11%)
NS 0 0 1000cc 660cc 330cc (33%)
 Precautions in usage of Isotonic solutions
• Be aware that patients being treated for hypovolemia can
quickly develop hypervolemia (fluid volume overload)
following rapid or overinfusion of isotonic fluids.

• Document baseline vital signs, edema status, lung sounds,

and heart sounds before beginning the infusion, and
continue monitoring during and after the infusion.
 Precautions in usage of Isotonic solutions
• Frequently assess the patient's response to I.V. therapy,
monitoring for signs and symptoms of hypervolemia such as:

hypertension / bounding pulse / pulmonary crackles /

peripheral edema / dyspnea/ shortness of breath /
jugular venous distention (JVD)

• Monitor intake and output

• Elevate the head of bed at 35 to 45 degrees, unless
contraindicated .
• If edema is present, elevate the patient's legs.
• monitor for signs and symptoms of continued hypovolemia,
including:
 urine output of less than 0.5 mL/kg /hour /
 poor skin turgor
 tachycardia
 weak, thready pulse
 hypotension
• Educate patients and their families about signs and symptoms of
volume overload and dehydration
• instruct patients to notify if they have trouble breathing or notice
any swelling.
• Instruct patients and families to keep the head of the bed
elevated (unless contraindicated).
 Thank
you for
your
attention
Intravenous Fluid Therapy
Part Two

Prepared by : Dr. Ahmed Kholeif

General Practitioner

Date : 14th January,2013

 B- HYPOTONIC FLUIDS
• Compared with intracellular fluid (as well as compared with
isotonic solutions), hypotonic solutions have a lower
concentration of solutes (electrolytes). And osmolality less
than 250 mOsm/L .
• Hypotonic crystalloid solutions lowers the serum osmolality
within the vascular space, causing fluid to shift from the
intravascular space to both the intracellular and interstitial
spaces.
• These solutions will hydrate cells, although their use may
deplete fluid within the circulatory system.
 TYPES OF HYPOTONIC FLUIDS
• 0.45% sodium chloride (0.45% NaCl), 0.33% sodium
chloride, 0.2% sodium chloride, and 2.5% dextrose in
water
• Hypotonic fluids are used to treat patients with
conditions causing intracellular dehydration, when
fluid needs to be shifted into the cell , such as:
1. Hypernatremia
2. Diabetic ketoacidosis
3. Hyperosmolar hyperglycemic state.
 HYPOTONIC FLUIDS
Precautions with hypotonic solutions
 Never give hypotonic solutions to patients who are
at risk for increased ICP because it may exacerbate
cerebral edema
 Don't use hypotonic solutions in patients with liver
disease, trauma, or burns due to the potential for
depletion of intravascular fluid volume
 HYPOTONIC FLUIDS
Precautions with hypotonic solutions
The decrease in vascular bed volume can worsen existing
hypovolemia and hypotension and cause cardiovascular
collapse
Monitor patients for signs and symptoms of fluid volume
deficit
 In older adult patients, confusion may be an indicator of a
fluid volume deficit. Instruct patients to inform you if they feel
dizzy or just "don't feel right."
 C- HYPERTONIC SOLUTIONS
• What is hypertonic solutions?
• Solution that have a higher tonicity or solute
concentration. Hypertonic fluids have an
osmolarity of 375 mOsm/L or higher

• The osmotic pressure gradient draws water

out of the intracellular space, increasing
extracellular fluid volume, so they are used as
volume expanders.
 HYPERTONIC SOLUTIONS
Some examples and Indications:
1- 3% sodium chloride (3% NaCl):
• May be prescribed for patients in critical situations
of severe hyponatremia.
• Patients with cerebral edema may benefit from an
infusion of hypertonic sodium chloride
2- 5% Dextrose with normal saline (D5NS): which
replaces sodium, chloride and some calories
 HYPERTONIC SOLUTIONS
Precautions with hypertonic fluids:
Hypertonic sodium chloride solutions should be administered only in high
acuity areas with constant nursing surveillance for potential complications .
Maintain vigilance when administering hypertonic saline solutions
because of their potential for causing intravascular fluid volume overload
and pulmonary edema.
shouldn't be given for an indefinite period of time.
Prescriptions for their use should state the specific hypertonic fluid to be
infused, the total volume to be infused and infusion rate, or the length of
time to continue the infusion .
It is better to store hypertonic sodium chloride solutions apart from
regular floor stock I.V. fluids .
 Colloid solutions
How does it work?
• It expand the intravascular volume by drawing fluid from
the interstitial spaces into the intravascular compartment
through their higher oncotic pressure.

• the same effect as hypertonic crystalloids solutions but it

requires administration of less total volume and have a longer
duration of action because the molecules remain within the
intravascular space longer.

• Its effect can last for several days if capillary wall linings are
intact and working properly.
 Colloid solutions
Examples:

1- 5% albumin (Human albumin solution)

- The most commonly utilized colloid solutions.
- It contains plasma protein fractions obtained from human plasma and works to
rapidly expand the plasma volume used for:
•volume expansion
•moderate protein replacement
•achievement of hemodynamic stability in shock states.
- considered a blood transfusion product and requires all the same nursing
precautions used when administering other blood products.
-It can be expensive and its availability is limited to the supply of human donors
 Colloid solutions
Albumin Contraindications:
a) Severe anemia
b) Heart failure
c ) Known sensitivity to albumin
d ) Angiotensin-converting enzyme inhibitors ( ACEI)
should be withheld for at least 24 hours before
administering albumin because of the risk of atypical
reactions, such as flushing and hypotension

 
 What to do if you suspect
transfusion reaction
• Sings of transfusion reaction may include:
fever, flank pain, vital sign changes, nausea, headache,
urticaria, dyspnea, and broncho spasm.
• If you suspect a transfusion reaction, take these
immediate actions:
1. Stop the transfusion.
2. Keep the I.V. line open with normal saline solution.
3. Notify the physician and blood bank.
4. Intervene for signs and symptoms as appropriate.
5. Monitor the patients vital signs.
 Colloid solutions
2- Hydroxyethalstarches
o Another form of hypertonic synthetic colloids used for
volume expansion
oContain sodium and chloride and used for hemodynamic
volume replacement following major surgery and to treat
major burns
o Less expensive than albumin and their effects can last 24 to
36 hours
 Colloid solutions
Precautions when using Colloid solutions:
1)The patient is at risk for developing fluid volume overload
2) As for blood products, use an 18-gauge or larger needle to
infuse colloids.
3)Monitor the patient for signs and symptoms of
hypervolemia, including:
• Increased BP
•Dyspnea or crackles in the lungs
•edema.
 Colloid solutions
Precautions when using Colloid solutions:
4) Closely monitor intake and output.
5) Colloid solutions can interfere with platelet function and increase
bleeding times, so monitor the patient's coagulation indexes.
6) Elevate the head of bed unless contraindicated.
7) Anaphylactoid reactions are a rare but potentially lethal adverse
reaction to colloids. Take a careful allergy history from patients
receiving colloids (or any other drug or fluid), asking specifically if
they've ever had a reaction to an I.V. infusion
 Components of fluid therapy
1. Maintenance therapy:
replaces normal ongoing losses
2. Fluid Resuscitation:
corrects any existing water and electrolyte
deficits.
 Components of fluid therapy
A. Maintenance therapy
Maintenance therapy is usually undertaken when
the individual is not expected to eat or drink
normally for a longer time (eg, perioperatively or
patient on a ventilator)
 Maintenance therapy
How to calculate maintenance fluid flow rates?
The most commonly used formula is (4/2/1) rule a.k.a ( Weight+40),
which is used for both adults and pediatrics.

4/2/1 rule
•4 ml/kg/hr for first 10 kg (=40ml/hr)
•then 2 ml/kg/hr for next 10 kg (=20ml/hr)
•then 1 ml/kg/hr for any kgs over that
This always gives 60ml/hr for first 20 kg
then you add 1 ml/kg/hr for each kg over 20 kg
So: Weight in kg + 40 = Maintenance IV rate/hour
For any person weighing more than 20kg
 Fluid Resuscitation

B) Fluid Resuscitation :
Correction of existing abnormalities in volume status or serum
electrolytes (as in hypovolemic shock)
What is the Parameters used to assess volume deficit?
1- Blood pressure
2- Urine output
3- Jugular venous pressure
4- Urine sodium concentration
 Fluid Resuscitation

How to know that the patient has Hypovolemic Shock?

The patient has the following sings and symptoms:
1- Anxiety or agitation 2- Cool, Pale skin
3- Confusion 4- Decreased or no urine output
5- Rapid breathing 6- Disturbed consciousness
7- Low blood pressure 8- Low body temperature
9- Rapid pulse, often weak and
thready
 Fluid Resuscitation
Rate of Repletion of Fluid deficit:
1- Severe volume depletion or hypovolemic shock:
Rapid infusion of 1-2L of isotonic saline (0.9% NS) as rapidly as
possible to restore tissue perfusion

2- Mild to moderate hypovolemia:

Choose a rate that is 50-100mL/h greater than estimated fluid
losses. calculating fluid loss as follows:
Urine output= 50ml/h
Insensible losses = 30ml/h
Additional loss such as Vomiting or Diarrhea or high fever (additional 100-
150 ml/day for each degree of temp >37 C)
FLUID OVERLOAD (HYPERVOLEMIA)

It is excessive accumulation of fluid in the body,

due to:
1- Excessive parenteral infusion
2- Deficiencies in cardiovascular or renal fluid
volume regulation
FLUID OVERLOAD (HYPERVOLEMIA)
Signs and Symptoms
They are not always typical but most commonly are:
1- Edema (swelling) - particularly feet, and ankles
2- Difficulty breathing while lying down
3- Crackles on auscultation
4- High blood pressure
5- Irritated cough
6- Jugular vein distension
7- Shortness of breath (dyspnea)
8- Strong, rapid pulse
 FLUID OVERLOAD (HYPERVOLEMIA)
Management of Hypervolemia
1- Prevention is the best way
2- Sodium restriction
3- Fluid restriction
4- Diuretics
5- Dialysis
 IV Modes of administration
 Peripheral IV line placed into a peripheral vein
 PICC : Central line that is placed via the peripheral
vasculature. Its tip terminates in the superior vena cava
 Peripheral midline catheters: Shorter version of the PICC,
Its tip terminates in the axilla
 Hickman lines: Skin tunneled cuffed central catheters
 How to calculate IV flow rates !
Intravenous fluid must be given at a specific
rate, neither too fast nor too slow. The specific
rate may be measured as ml/hour, L/hour or
drops/min. To control or adjust the flow rate
only drops per minute are used.
 How to calculate IV flow rates !
What is a drop factor?
Drop factor is the number of drops in one milliliter
used in IV fluid administration (also called drip
factor). A number of different drop factors are
available but the Commonest are:
1- 10 drops/ml (blood set)
2- 15 drops / ml (regular set)
3- 60 drops / ml (microdrop, burette)
 How to calculate IV flow rates ?
The formula for working out flow rates is:
volume (ml) X drop factor (gtts / ml)
= gtts / min
--------------------------------------------- (flow rate)
time (min)
Example:
1500 ml IV Saline is ordered over 12 hours. Using a drop factor of 15 drops /
ml, how many drops per minute need to be delivered?
1500 (ml) X 15 (drop / ml)
--------------------------------------------------- = 31 drop/ minute
12 x 60 (gives us total minutes)
 How to calculate drug dosage?

Common Conversions:
1 Liter = 1000 Milliliters
1 Gram = 1000 Milligrams
1 Milligram = 1000 Micrograms
1 Kilogram = 2.2 pounds
Remember! Before doing the calculation,
convert units of measurement to one system.
 How to calculate drug dosage?
Example:
The ordered dose is Ceftriaxone 750 mg IV. the
container contain 1g in a 10 ml vial.
How to calculate?
You should convert first g to mg , then :

(D) 750 mg X (V) 10 ml = 7.5 ml

(H) 1000 mg
 How to calculate drug dosage?
D
x V = Amount to Give
H
D = dose ordered or desired dose
H = dose on container label or dose on hand
V = form and amount in which drug comes
(tablet, capsule, liquid)
 IV lines common Problems
A. Infiltration
when the catheter unintentionally enters the tissue surrounding the blood vessel
and the IV fluid go into the tissues.

B. Phlebitis
Inflammation of a blood vessel

C. Hypothermia
When large amounts of cold fluids are infused rapidly

D. Local infection (Abscess)

A microscopic organism may use the tiny hole in the skin created by the IV catheter
to find its way into the body, and cause an infection
 Remember !
I. Treat IV fluids as “prescription” like any other medication
II. Determine if patient needs maintenance or resuscitation
III. Choose fluid type based on co-existing electrolyte disturbances
IV. Don’t forget about additional IV medications patient is receiving
V. Choose rate of fluid administration based on weight and minimal
daily requirements
VI. Avoid fluids in patients with ECF volume excess
VII. Always reassess whether the patient continues to require IV fluid
Last Slide
It’s Over

THANK YOU !