Scribd
Upload
131 views1 page

Pulsation Damper Specification Form: Accumulator Type Fluids/medium Further Information

This document is a pulsation damper specification form requesting information from customers such as company details, project name, accumulator type, operating pressures, temperature ranges, materials, port and coating details, application needs, and pump system data to customize a pulsation damper design. Key information requested includes maximum and minimum operating pressures, pre-charge pressure, ambient and operating temperatures, cycle time, pump displacement and speed, required residual pulsation percentage, and any additional application remarks. The form is provided by HYDAC Technology GmbH to collect necessary technical specifications for pulsation damper production.

Uploaded by

santhoshkumarpl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views1 page

Pulsation Damper Specification Form: Accumulator Type Fluids/medium Further Information

This document is a pulsation damper specification form requesting information from customers such as company details, project name, accumulator type, operating pressures, temperature ranges, materials, port and coating details, application needs, and pump system data to customize a pulsation damper design. Key information requested includes maximum and minimum operating pressures, pre-charge pressure, ambient and operating temperatures, cycle time, pump displacement and speed, required residual pulsation percentage, and any additional application remarks. The form is provided by HYDAC Technology GmbH to collect necessary technical specifications for pulsation damper production.

Uploaded by

santhoshkumarpl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PULSATION DAMPER SPECIFICATION FORM

(Subject to technical modifications, mandatory field)

Company: Location:

Name, First name: Project name:

E-mail: Requirement: pieces/year

Telephone no.: as ¨ spare part


¨ original equipment

Accumulator type Fluids/medium Further information

¨ Bladder accumulator Fluid Industry

¨ Piston accumulator

¨ Diaphragm accumulator Density Country of installation

¨ Metal bellows accumulator kg/m²

¨ Viscosity at 20 °C Dimensioning/certification

cSt
Accumulator data
Viscosity at operating temperature Specification
Max. operating pressure
cSt
bar

Min. operating pressure


Additional information Pump and system data
bar
Installation dimensions (height x Øa) Operating/Pump pressure
Pre-charge pressure at 20 °C (nitrogen) 1)
mm mm
bar
Fluid port Flow rate
Ambient temperature
¨ Flange mm
Min. °C Max. °C
¨ Thread Rotational speed
Operating temperature of the accumulator
Gas port 1/min
Min. °C Max. °C No. of displacement
¨ M28x1.5 ¨ 7/8-14UNF elements
Complete cycle time
¨ ¨ single ¨ double-acting
s
Coating/finish Pump factor optional
Materials 2) ¨ internal Stroke volume
Accumulator shell ¨ external for piston pump

Application d = Ø piston mm
Fluid port ¨ pressure side ¨ suction side H = stroke length mm
Required residual
pulsation % for diaphragm pumps,
see manufacturer’s specifications
Elastomer 1)
see catalogue section No. 3.000,
Result l gas volume section on dimensioning
2)
dependent on operating temperature and/or fluid
resistance

Remarks:

HYDAC Technology GmbH


Industriegebiet
66280 Sulzbach/Saar, Germany
Tel.: +49 (0) 68 97 / 509 - 01
Fax: +49 (0) 68 97 / 509 - 464
Internet: www.hydac.com
Spare parts/accessories are available at www.hydac.com / Products / Hydraulic accumulators E-mail: [email protected]

You might also like