Installing and Configuring The ABCIP DA Server - InSource KnowledgeCenter PDF
Installing and Configuring The ABCIP DA Server - InSource KnowledgeCenter PDF
Table of contents
INSTALLATION GUIDE
Description
This Tech Note was written as a general walkthrough for installing and con guring the DASABCIP DA Server
5.0. The actual screens encountered may vary depending on other Wonderware software that is currently
installed on the machine.
Author
Benjamin Davis
How can we help you?
https://knowledge.insourcess.com/Wonderware_Device_Integration_and_Communication/DA_Server_Install_Guides/Installing_and_configuring… 1/13
11/8/2018 Installing and configuring the ABCIP DA Server - InSource KnowledgeCenter
Publish Date 01/15/2014
5.0
Applies to Version
Applies to System/Module
************************************************************************************************************************
************************************
Detailed Steps
Launch the setup.exe that is located on the root of the DASABCIP DA Server installation folder.
Once the setup has been launched you should see the screen below. Click the next button to proceed with the
installation.
Next accept the license agreement and then click the Next button.
The DA Server installation will shut down any DA Servers that are currently running during the installation. The
next screen is an acknowledgment of this fact and a warning that the installation may require a reboot. Press
the Next button to proceed.
Choose the location where you would like to install the DA Server and then click the Next button and then Next
at the following screen to proceed. The default location for a 64 bit Operating System will be the location in the
screenshot below:
Click Next.
How can we help you?
https://knowledge.insourcess.com/Wonderware_Device_Integration_and_Communication/DA_Server_Install_Guides/Installing_and_configuring… 5/13
11/8/2018 Installing and configuring the ABCIP DA Server - InSource KnowledgeCenter
Con guration
The DA Server con guration (.aacfg) les are stored in the speci c location depending on the version of the DA
Server that is installed. The following locations are for the associated Operating Systems below:
New Version
Older Version(s)
C:\Program Files\Wonderware\DAServer\DASABCIP\Bin
New Version
C:\ProgramData\Wonderware\DAServer\DASABCIP
Older Version(s)
C:\Users\All Users\Wonderware\DAServer\DASABCIP
If you already have an existing system with the same con guration you wish to use, simply copy the
DASABCIP.aacfg le from the working machine to the equivalent location on the new machine. If your new
con guration is named something other than DASABCIP.aacfg you will need to switch to the new con guration
by right clicking the con guration under the DASABCIP and then choosing “Use Another Con guration Set” and
selecting the appropriate con guration le. If the DA Server is activated it will need to be de-activated before
you can switch to another con guration.
The rst step for creating a new con guration will be to right click on the con guration and choose “Add
Port_CIP Object.”
Right click the newly added port. Choose the type of processor you wish to add.
Right click the newly created PLC object. Click Add BACKPLANE_CLX Object.
Right click the newly created backplane object. Click Add LOGIX5000_CLX Object.
The next step will be to create topics. To do this you will click on the Device Groups tab within the Logix5000
object. Next right click and choose Add and create a topic name.
Save the con guration by clicking the oppy disk in the upper right corner.
Back to top
Recommended articles
How
TN canABTCP
DA108 we help you?Error Message Descriptions and Solutions
DAServer
The following table lists all the generic-DAServer and ABTCP-DAServer-speci c error messages up to and including DA…
https://knowledge.insourcess.com/Wonderware_Device_Integration_and_Communication/DA_Server_Install_Guides/Installing_and_configurin… 12/13
11/8/2018 Installing and configuring the ABCIP DA Server - InSource KnowledgeCenter
e o o g tab e sts a t e ge e c Se e a d C Se e spec c e o essages up to a d c ud g
TN DA109 Forcing a reload of the Tag DB from a ControlLogix PLC in the DASABCIP DA Server
How to force a reload of the tag database from a ControlLogix PLC in the Wonderware DASABCIP DA Server from InSo…
License Guides
Install Guides
IT Article Class:
NA
Tags:
DASABCIP, getting started, stage:review
Use of content on this site means you agree to InSource Terms and Conditions HERE