HDK® H30

PYROGENIC SILICA

Product description HDK® H30 should be stored in the original packaging

in dry storage areas.
Synthetic, hydrophobic, amorphous silica, produced
via flame hydrolysis. Storage beyond the date specified on the label does
not necessarily mean that the product is no longer
usable. In this case however, the properties required
Special features for the intended use must be checked for quality
assurance reasons.
White colloidal powder of high purity.
Packaging
Application
HDK® H30 is offered in following packaging:
HDK® H30 is applied as a thickening and thixotropic
agent in coatings, printing inks, adhesives, cosmetics - pallet with paper bags:
and others. HDK® H30 is used as a reinforcing filler in 10 kg bags
elastomers, mainly silicone-elastomers. HDK® H30
acts as a free flow additive in the production of powder Details about packaging and handling:
coatings. (http://www.wacker.com/hdk).

Processing
Safety notes
A good dispersion of HDK® H30 is a must to assure
optimum performance. Comprehensive instructions are given in the
corresponding Material Safety Data Sheets.
More detailed information about the application and They are available on request from WACKER
processing of HDK® H30 is available in our HDK- subsidiaries or may be printed via the WACKER web
brochures and on the WACKER web site site (http://www.wacker.com/hdk).
(http://www.wacker.com/hdk).
During transportation and processing HDK® H30 may
cause electrostatic charges.
Storage Like other amorphous silicas HDK® H30 does not
show either carcinogenic (IARC classification, Volume
68, 1997) or mutagenic properties.
Further information for storage:
Store in a dry and cool place.
The 'Best use before end' date of each batch is shown
on the shipping label and the certificate of analysis.

Technical data sheet for HDK® H30 / Version: 1.9 / Date of last alteration: 08.06.2017 1/2
Product data
Typical general characteristics Inspection Method Value
SiO² content (based on the substance heated at 1000 °C for 2 h) DIN EN ISO 3262-19 > 99,8 %
Density at 20 °C (SiO²) DIN 51757 approx. 2,2 g/cm³
Residual silanol content 50 %
(relative silanol content in relation to the hydrophilic silica, which shows approx.
2 SiOH/nm²)
BET surface of the hydrophobic silica DIN ISO 9277 approx. 250 m2/g
DIN 66132
INCI name Silica Dimethyl Silylate

Physical-chemical properties
BET surface of the hydrophilic silica DIN ISO 9277 270 - 330 m2/g
DIN 66132
Carbon content DIN ISO 10694 1,4 - 2,6 %
pH-Value in 4 % dispersion (1 : 1 mixture of water-methanol) DIN EN ISO 787-9 3,8 - 4,5
Tamped density DIN EN ISO 787-11 approx. 40 g/l
Loss on drying , ex works (2 h at 105 °C) DIN EN ISO 787-2 < 0,6 %
Sieve residue , acc. to Mocker > 40 µm DIN EN ISO 787-18 < 0,05 %
Surface modification Dimethylsiloxy

These figures are only intended as a guide and should not be used in preparing specifications.

The data presented in this medium are in accordance with the present state of our knowledge but The management system For technical, quality, or
do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the has been certified product safety questions,
right to alter product constants within the scope of technical progress or new developments. The according to please contact:
recommendations made in this medium should be checked by preliminary trials because of DIN EN ISO 9001 and
conditions during processing over which we have no control, especially where other companies’ DIN EN ISO 14001 Wacker Chemie AG
raw materials are also being used. The information provided by us does not absolve the user from Hanns-Seidel-Platz 4
the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, WACKER® is a trademark 81737 München, Germany
clarifying the position. Recommendations for use do not constitute a warranty, either express or of [email protected]
implied, of the fitness or suitability of the product for a particular purpose. Wacker Chemie AG.
HDK® is a trademark of www.wacker.com/hdk
Wacker Chemie AG.

Technical data sheet for HDK® H30 / Version: 1.9 / Date of last alteration: 08.06.2017 2/2