Scribd
Upload
313 views2 pages

SC09FSS

This document provides information about the Fiber Optic to RS232/RS485/RS422 Converter Model SC09FSS from San Telequip (P) Ltd. located in Pune, India. The converter securely transmits serial data over fiber optic cable at distances up to 4 km for multimode fiber and 20 km for singlemode fiber. It has RS232, RS422, and RS485 interface circuits and supports data transmission speeds up to 115.2 kbps for RS232 and 500 kbps for RS422/485. The converter has features such as LED indicators, ESD protection, surge protection, and operates from 9 to 48V DC power.

Uploaded by

sureshkanuboyina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
313 views2 pages

SC09FSS

This document provides information about the Fiber Optic to RS232/RS485/RS422 Converter Model SC09FSS from San Telequip (P) Ltd. located in Pune, India. The converter securely transmits serial data over fiber optic cable at distances up to 4 km for multimode fiber and 20 km for singlemode fiber. It has RS232, RS422, and RS485 interface circuits and supports data transmission speeds up to 115.2 kbps for RS232 and 500 kbps for RS422/485. The converter has features such as LED indicators, ESD protection, surge protection, and operates from 9 to 48V DC power.

Uploaded by

sureshkanuboyina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

San Telequip (P) Ltd.

,
504 & 505 Deron Heights, Baner Road,
Pune 411045, India
Phone : +91-20-65001587, 9764027070, 8390069393 Connecting Converting Leading !
email : [email protected] .

Fiber Optic to RS232/RS485/RS422 Converter, Model SC09FSS

SC09FS series of converters are an ideal choice for


connecting devices situated in environments where
electromagnetic & radio frequency is a major concern. They
economically & efficiently extend the Serial port over
a distance up to 2Km over Multi-mode fiber or up to 20Km
over Single-mode fiber. The converter is equipped with
multiple interface circuit such as RS232, RS422, RS485 (2
or 4 wire). It secures data transmission at speeds up to
115.2kbps for RS232, or up to 500Kbps for RS422 / 485.

Technical Specification
Model Type Fiber Cable Wave Tx Rx Distance
Length (nm) Power Sensitivity
db db
Multimode 50 / 125, 62.5 / 125, 850 / 1310 > -10 < -18 4Km
or 100 / 140µm
Single Mode 8.3 / 125, 8.7 / 125, 9 / 1310 > -8 < -20 Default : 20Km.
125 or 10 / 125µm Optionally 20Km
onwards
Min 1 Km

NOTE : 850nm subject to availability

RS232 Signals : Rx, Tx, Gnd


RS485/422 Signals : D+, D-, Tx+, Tx-, Rx+, Rx-
Data Rate : Upto 460kbps for RS485/RS422 & 115kbps for RS232

Connector details : Multimode : SC/ST, Singlemode : SC/ST/FC


: 9 Pin Industrial Screw type for Serial Port

Connection Modes : Peer to Peer and Supports Multidrops

LED Indications : Power, Fiber Data, Serial Data

Power Supply : 9 to 48V DC, Industrial Screw type connectors and


: 230V External Adapter provision
Power Consumption : 350mA @ 9V DC
Reverse Polarity Protection : Yes
ESD Protection : 15KV
Surge Protection : 600W

Ambient Temp : 0 to 50°C


Humidity : 5% to 90% Rh non condensing
Dimension : 97mm * 65mm * 22mm (L*B*H)

Page 1 of 2,
San Telequip (P) Ltd.,
504 & 505 Deron Heights, Baner Road,
Pune 411045, India
Phone : +91-20-65001587, 9764027070, 8390069393 Connecting Converting Leading !
email : [email protected] .

NOTE : All Serial to Fiber Media Converters need to be used in Pairs and of the same
makes

Model Selection Chart


Model Code : SC09FSS S/M 000 ST/SC 24
Basic Model : SC09FSS
FO Mode : S : Single Mode, M : Multi Mode
Distance for SM : 00 : 20,40,50 …. Kms
: 20Km @ 1310nm as default.
: 1310/1550nm for higher distance.
: Pls specify during enquiry
Connector : ST : ST, SC : SC, FC : FC Type Connector
Power Supply : 24 : Range 9 to 48V DC

Page 2 of 2,

You might also like