Experion Series C Platform

Specifications and Technical Data

EP03-520-310, Version 2.4

Table of Contents
Product Introduction Summary ......................................................................... 2
Features............................................................................................................ 2
Detailed Specifications – Environmental Characteristics ...........................3
Approval Bodies................................................................................................ 5
Series-C Power System.................................................................................... 7

Experion Series C Platform Specifications and Technical Data

1
EP03-520-310 February, 2008
Release 310 Version 2.4

Product Introduction Summary

Overview
This document provides information relating to the
common components required to support, configure and
operate the Experion ® Series C Control system.

The following Series C items are included in this

document.

- Environmental characteristics
- Approvals
- Power system
Features
All Series C components feature an innovative design
that improves heat management. This unique look
provides a significant reduction in overall size for the
equivalent function.

The unique features of Series C include:

• Electronics modules are tilted for better heat

distribution.

• I/O Module and field terminations are combined

in the same area. The I/O Module is plugged
into an I/O termination assembly (IOTA) to
eliminate the need for a separate chassis to hold
the electronics assemblies

• Two level “detachable” terminals for landing the

• The electronics modules can be removed and
field wiring in the enclosure, providing easier
re-inserted under power with no damage to the
plant installation and maintenance.
Series C system This is known as Removal and
Insertion Under Power (RIUP)
• Field power is supplied through the IOTA, with
no need for extra power supplies and the
• Over-current detection and prevention methods
associated craft wired marshalling.
are employed to allow for short circuits in the
field without affecting adjacent channels or
• Redundancy is accomplished directly on the
blowing a fuse.
IOTA without any external cabling or
redundancy control devices, by simply adding a
second IOM to an IOTA. The C300 redundancy
is accomplished with a cable physically
connecting two C300 Controllers in a redundant
configuration.

Experion Series C Platform Specifications and Technical Data

2
EP03-520-310 February, 2008
Release 310 Version 2.4

Environmental Characteristics
This section relates to the physical characteristics applicable to all Series C components. Where applicable,
specifications state limits within an approved cabinet and to the cabinet skin.

The table below addresses:

• Temperature and humidity
• Ingress Protection
• EMC, ESD, EMI
• Vibration

Detailed Specifications – Environmental Characteristics

Consideration Operative and Storage Limits(1) Transportation Band(1)

Ambient Temp Range External: 0 to +50°C (2) -40 to 85°C

(3)
Internal: 0 to +60°C

Temp. Rate of Change <= 1°C/min. <=5°C/min.

Relative Humidity (3) 5 to 95% (non condensing) (4) 5 to 95%, (non condensing) (4)

Barometric Pressure
Altitude -300 to +3000 m any

Corrosives G3 Standard (ISA S71.04) – G3

Denoted by “CC-“ model
number

Ingress Protection IP 20 NEMA 1 IP 20 NEMA 1

EMC Emissions: N/A

EN61326-1:1988, A-2: 2001
Immunity:
EN61326-1:1998, Amended 2:
2001
Harmonics: EN61000-3-2
Flicker: EN61000-3-3

EMI 15 V/M (5) N/A

ESD 15kV 20x once/5 seconds (6) N/A

Vibration (9) Sinusoidal (7) Random (8)

(3 axes) (5 to 10 Hz) Vertical Shipping Axis
2.54mm/0.100in Max (10 to 5 to 300 Hz 1.07 g (rms)
150 Hz) 0.5 g max. (0-Pk)

Longitudinal and Transverse

10 to 500 Hz

Experion Series C Platform Specifications and Technical Data

3
EP03-520-310 February, 2008
Release 310 Version 2.4

Notes:
(1) If Lithium Batteries are used, some Government regulations may prohibit air transport of batteries.
(2)This rating applies to the external ambient temperature of the enclosure with doors closed.
(3)This rating applies to the internal ambient temperature of the enclosure with the doors closed.
(4) The maximum relative humidity spec applies up to 40°C. Above 40°C the RH spec is de-rated to
55% to maintain constant moisture content.
(5) Measured with field strength meter near the surface of the electronics with doors open. This is a
goal for the entire contents of the cabinet and may be a stretch for some items.
(6) Applied to items that are likely to be in contact with discharge sources (e.g. human body) during
typical maintenance actions.
(7) 10 Hz is approximate – exact crossover freq. is determined by the intersection of the displacement
and acceleration.
(8) Composite Transportation Test Curve--encompassing maximum Random Vibration power
spectral density values associated with ground, air, and sea transportation environments.

(9) Information acquired from Vibration Specification 51199949

A note on the transportation Vibration specification:

The transportation portion of the vibration specification in the vertical direction adheres to ASTM D4169–96
Standard Practice for Performance Testing of Shipping Containers and Systems for Truck and Air at Quality
Assurance Level II, and in the longitudinal and transverse axes MIL-STD_810F, Category 4 – Truck
Transportation over US Highways. The transportation shock adheres to ASTM D4169-96 Standard Practice for
Performance Testing of Shipping Containers for “Mechanical Handling: Fork Lift Truck Handling for items over
500 lbs [226.8 kgs] Quality Assurance Level II.

Experion Series C Platform Specifications and Technical Data

4
EP03-520-310 February, 2008
Release 310 Version 2.4

Approval Bodies

Factory Mutual

Division 2 Approvals
All models are approved as non-incendive for use in Class I, Division 2, Group A, B, C, D hazardous (classified)
locations.
Selected low voltage AO, AI and DI models will also have additional approval as having non-incendive field wiring
for connection to Class I, Division, 2, Group A, B, C and D hazardous (classified) locations.

Zone 2 Approvals
All models are approved as normally non-sparking apparatus for use in Class I, Zone 2, AEx nA IIC hazardous
(classified) locations.
Selected low voltage AO, AI and DI models will also have additional approval as having non-incendive field wiring
connections to Class I, Zone 2, Group IIC hazardous (classified) locations.

Temperature rating of all individual models as well as cabinet configurations is rated T4.

Canadian Standards Association

Division 2 Certifications
All models are certified as suitable for use in Class I, Division 2, Group A, B, C, D hazardous locations.

Zone 2 Certifications
All models are certified as normally non-sparking apparatus, Ex nA IIC, for use in Zone 2 hazardous locations.
Selected low voltage AO, AI and DI models will also have additional certification as having energy limited circuits,
Ex nA [L] IIC, for field wiring connections within Class I, Zone 2, Group IIC hazardous (classified) locations.

Temperature rating of all individual models as well as cabinet configurations is not to exceed T4.

ATEX Certification

Zone 2 Certifications
All models are certified as normally non-sparking apparatus, II 3 G EEx nA IIC, for use in Zone 2 hazardous
locations.
Selected low voltage AO, AI and DI models will also have additional certification as having energy limited circuits,
II 3 G EEx nA [L] IIC, for field wiring connections within Zone 2, Group IIC hazardous locations.

Temperature rating of all individual models as well as cabinet configurations are rated T4.

Experion Series C Platform Specifications and Technical Data

5
EP03-520-310 February, 2008
Release 310 Version 2.4

CE
• EN 61326:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements.
• EN 50082-2:1995 Electromagnetic Compatibility - Generic Immunity Standard, Part 2: Industrial Environment.
• EN 55011:1991 Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific
and Medical (ISM) Radio-Frequency Equipment
• EN 61010-1:1993 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use.
• Part 1: General Requirements

C-Tick
Australian Radio communications Act of 1997, Section 182

Detailed Specifications – Approvals

Consideration Operative and Storage Limits Transportation Band

Agency Approvals

Cabinet:
Class I, Division 2, Grp. ABCD, T4
Class I, Zone 2, AEx/Ex nC[nL] IIC T4
ATEX II 3G EEx nC [nL] IIC T4

Field Wiring:
Nonincendive & [nL] field wiring

Experion Series C Platform Specifications and Technical Data

6
EP03-520-310 February, 2008
Release 310 Version 2.4

Series-C Power System

The Series C power system provides optionally redundant 24VDC primary power at 20
amps for Series C devices. The power system allows for reserve (battery) power when
disconnected from the power mains.

The power system also provides capabilities to support integral field power. This
eliminates the need for additional power sources as well as the additional wiring, fusing,
marshalling and documentation costs.
Notable Features
• Modular design
• Space efficient design
• Designed specifically for Series C
• Power supply is removable and insert-able under power
• Redundant power supply
• Optional battery backup for a minimum of 30 minutes
• Seamless switch operation between either of the power supplies or battery backup
system
• Visual and point contact alarms on all power system components

Experion Series C Platform Specifications and Technical Data

7
EP03-520-310 February, 2008
Release 310 Version 2.4

Detailed Specifications – Power System

PARAMETER OPERATING OPERATING TRANSPORT &

BAND LIMITS STORAGE

AC Input (VAC, rms) 100-230 85-264

Frequency (Hz) 47-63 47-63

Holdup(1) 20ms 20ms
Output Voltage (VDC) 24-26VDC 24-26VDC

Batter Backup (UPS) 30min @ 20A 30min @ 20A

Output Current 0-20 amps 0-20 amps

DC Output

Load Change (%) 30 to 100 0 to 100

Efficiency 65% (min) 65% (min)

Input Current @ 120/240
VAC line Inrush/ Rerush(2) 35A peak max 35A peak max

Running (max) 5.5 Amps rms 9 amps rms

@120V
Crest Factor (max) 2.7Amps rms @240V 1.55

Power Factor (min) with a 1.55 0.95 (min)

25VDC 10A to 20A load
0.95 (min)
Ambient Temperature
(a) Range (deg. C) 0 to 60 0 to 60 -55 to 125

(b) Max Rate of Change

(deg/min) 0.25 1 5

Relative Humidity
(non-condensing) 10-70% 5-95% 5-95%

Vibration 0.1 in. (Max) D.A. 0.1 in. (Max) D.A. 0.2 in. (Max) D.A.
Disp, 10-24 Hz, Disp, 10-24 Hz, Disp, 5-18 Hz, 3.5g
3.0g (0-peak) @ 24- 3.0g (0-peak) @ (0-peak) @ 18-200
60 Hz 24-60 Hz Hz
Shock
(a) Acceleration (g) 1 5 20

(b) Duration (mS) 30 30 15

Altitude (Meters) -300 to +3000 -300 to +3000 Air Shipment

(1) – Holdup time is the time the power system will continue to operate after power has been
removed. This allows for at least one full AC cycle for UPS systems to engage.
(2) – Inrush for one input line cycle maximum.

Experion Series C Platform Specifications and Technical Data

8
EP03-520-310 February, 2008
Release 310 Version 2.4

® ®
TotalPlant and Experion are registered trademarks of Honeywell International Inc. All other products and brand and product names shown herein are
trademarks of their respective owners. FOUNDATION is a trademark of the Fieldbus Foundation. HART is a trademark of the HART Communication
Foundation.

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for
a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customer. In no event is
Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change
without notice

For More Information

Learn more about how Honeywell’s products and
solutions, visit our website www.honeywell.com/ps or
contact your Honeywell account manager.

Automation & Control Solutions

Process Solutions
Honeywell
2500 W. Union Hills Drive
Phoenix, AZ 85027
Tel: 877.466.3993 or 602.313.6665 EP03-490-300
May 2007
www.honeywell.com/ps © 2007 Honeywell International Inc.

Experion Series C Platform Specifications and Technical Data

9