Scribd
Upload
123 views2 pages

Standard Shapes of Cut and Bent Bar To BS8666:2005

This document provides shape codes and descriptions for standard shapes of cut and bent bar according to BS8666:2005. There are over 75 shape codes listed that specify the length of each shape based on various combinations of dimensions A through E, allowing for tolerances and deviations as indicated. Additional shapes not covered by the standard shape codes require a dimensioned sketch and specification of each dimension.

Uploaded by

Eduardson Justo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views2 pages

Standard Shapes of Cut and Bent Bar To BS8666:2005

This document provides shape codes and descriptions for standard shapes of cut and bent bar according to BS8666:2005. There are over 75 shape codes listed that specify the length of each shape based on various combinations of dimensions A through E, allowing for tolerances and deviations as indicated. Additional shapes not covered by the standard shape codes require a dimensioned sketch and specification of each dimension.

Uploaded by

Eduardson Justo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Standard shapes of cut

and bent bar to BS8666:2005


Shape code 00

Shape code 01

Shape code 11

Shape code 12
Length=A Length=A Stock Lengths Length=A+(B) - 0.5r - d Length=A+(B) - 0.43R - 1.2d

Shape code 21
Shape code 13

Shape code 14

Shape code 15

Length=A+0.57B + (C) - 1.6d Length=A+(C) - 4d Length=A+(C) Length=A+B+(C) - r - 2d


Shape code 22

Shape code 23

Shape code 24

Shape code 25

Length=A+B+C+(D) - 1.5r - 3d Length=A+B+(C) - r - 2d Length=A+B+(C) Length=A+B+(E)


Shape code 26

Shape code 27

Shape code 28

Shape code 29

Length=A+B+(C) Length=A+B+(C) - 0.5r - d Length=A+B+(C) - 0.5r - d Length=A+B+(C) - r - 2d


Shape code 31

Shape code 32

Shape code 33

Shape code 34

Length=A+B+C+(D) - 1.5r - 3d Length=A+B+C+(D) - 1.5r - 3d Length=2A+1.7B+2(C) - 4d Length=A+B+C+(E) - 0.5r - d

Birfa.org.uk
Shape code 35

Shape code 36

Shape code 41

Shape code 44
Length=A+B+C+(E) - 0.5r - d Length=A+B+C+(D) - r - 2d Length=A+B+C+D+(E) - 2r - 4d Length=A+B+C+D+(E) - 2r - 4d
Shape code 46

Shape code 47

Shape code 51

Shape code 56
Length=A+2B+C+(E) Length=2A+B+2C+1.5r - 3d Length=2(A+B+(C)) - 2.5r - 5d Length=A+B+C+(D)+2(E) - 2.5r - 5d
Shape code 63

Shape code 64

Shape code 67

Shape code 75
Length=2A+3B+2(C) - 3r - 6d Length=A+B+C+2D+E+(F) - 3r - 6d Length=A Length=π (A - d) + B
Shape code 77

Shape code 98

Shape code 99

All other shapes where standard shapes cannot be used.


No other shape code number, form of designation or abbreviation shall be used in scheduling.
A dimensioned sketch shall be drawn over the dimension columns A to E. Every dimension
shall be specified and the dimension that is to allow for permissible deviations shall be
indictated in parenthesis, otherwise the fabricator is free to choose which dimension shall
allow for tolerance.

Length= Cπ (A - d) Length=A+2B+C+(D) - 2r - 4d Length=To be calculated

To find out more you can visit:

Birfa.org.uk

You might also like