Scribd
Upload
86 views2 pages

Base Plate

The base plate needs to support a column with a load of 88.756 KN and moment of 139.3 KN-m. [1] Calculations show the required base plate thickness is 55 mm, with dimensions of 217 mm x 42 mm. [2] Ten anchor bolts with a diameter of 33 mm are required to transfer the moment of 1256 KN to the base. [3] The pedestal should have dimensions of 191 mm x 191 mm to support the base plate area of 36,456 mm^2.

Uploaded by

Eos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
86 views2 pages

Base Plate

The base plate needs to support a column with a load of 88.756 KN and moment of 139.3 KN-m. [1] Calculations show the required base plate thickness is 55 mm, with dimensions of 217 mm x 42 mm. [2] Ten anchor bolts with a diameter of 33 mm are required to transfer the moment of 1256 KN to the base. [3] The pedestal should have dimensions of 191 mm x 191 mm to support the base plate area of 36,456 mm^2.

Uploaded by

Eos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

BASE PLATE

177.7
GIVEN :
Pu = 88.756 KN
Mz = 139.3 KN-m 406.7 420
A36 Base Plate : Fy = 248 Mpa
f'c = 28 Mpa
Column Section : W 16 X 40 420
Fy = 248 Mpa FOR ACTUAL BEARING STRESS.
d = 406.7 mm Fp=P/NB 88756
= = 9.74 Mpa
bf = 177.7 mm 9114
SOLUTION:
COMPUTING REQUIRED BASE PLATE THICKNESS:
FOR ALLOWABLE BEARING STRESS.
m = (N -0.95d)/2
Fp=0.35 f^′ c = 27 mm
Fp = 0.35 X 28
Fp = 9.8 Mpa n = (B -0.8bf)/2 = 139 mm

n^′= √(d bf)/4


FOR REQUIRED PLATE AREA: = 67 mm
Pu
A1 =
Fp ℓ = largest m, n, n'.
A1 =
88756
= 9,057 mm2
ℓ = 139 mm
9.8 t_required = ℓ√(Fp/(0.25 Fy ))
= 55 mm
FOR PLATE DIMENSION.
FOR ANCHOR BOLTS.
∆ = 0.5 ( 0.95 d -0.8 bf )
C = 40 + 0 = 40 mm
∆ = 0.5[ ( 0.95 )( 406.7) - ( 0.8 )( 177.7)] Y = 191 - 2 40 ) = 110.9 mm
(
∆ = 122.091 mm
T = Mz / Y
THEN N IS APPROXIMATELY: T = 1256 KN
REQUIRED AREA FOR BOLTS:
N = √(A_1 )+ Δ
T 1255.7
As = = = 8438.81 mm2
N = 9,056.73 + 122.091 Ft 0.6 ( 248 )
N = 217 mm Assume N: SAY, 10 BOLTS.
N = 250 mm D = 32.78
AND B SHOULD BE: D ≈ 33 mm diameter.
A
B = 1
N
9,056.73
B = = 42 mm = 50 mm
###

FOR AREA OF THE PEDESTAL.


A2 = 4 N B = 36,456 mm2

DIMENSION OF PEDESTAL. THEREFORE, USE PLATE


L = 191 mm 217 mm X 42 mm X 55 mm
W= 191 mm with 10 - 33 mm diameter anchor
bolts.

You might also like