version: 2011/12

Elevators manufactured by:

Hyundai Elevator Co., Ltd.
International Trade Division: Factories :

8F East Bldg., Hyundai Group Building, Shanghai, China

1-7 Yeonji-Dong, Jongno-Gu, Inchon-shi, Korea
Seoul 110-754, Korea
Phone No.: 0082-2-3670-0665
Email: [email protected]
Website: www.hyundaielevator.co.kr

Elevators marketed, installed and maintained in India by:

Kinetic Hyundai Elevator & Movement Technologies Ltd.
Head Office & Pune Area Office: Other Regional/ Area Offices:

G-92, D-III Block, MIDC, Chinchwad Bengaluru Hyderabad

Pune – 411 019 INDIA Chandigarh Jaipur
Chennai Kolkata
Phone: +91 20 64108986/87 Delhi Mumbai
Gurgaon
Email: [email protected]
Website: www.kinetic-hyundai.com

Other Locations Serviced :

Agra Faridabad Jodhpur Mysore Patiala

Ahmedabad Goa Kochi Nagpur Sonipat
Ahmednagar Greater NOIDA Lucknow NOIDA Thirupathi
Almora Indore Ludhiana Panchkula Zirakpur
Amritsar Jalgaon Meerut Panipat
Aurangabad Jallandhar Moga Pantnagar
Cochin Jamnagar Mohali Pathankot
lexiconcreations.com/khemtl-02

Elevator Planning Guide

Disclaimer : Designs are subject to change. We reserve the right to change design and specifications for the product
development without prior notice KINETIC HYUNDAI ELEVATOR & MOVEMENT TECHNOLOGIES LTD.
Kinetic Hyundai Elevator & Movement Technologies Limited
(KHEMTL) is a JV between Hyundai Elevator Co. Ltd, (HELCO) of
Korea and the Kinetic Group of India.

Kinetic Hyundai markets, installs and maintains state of the art

elevators, escalators and travellators from Hyundai in India. Kinetic
Hyundai also executes the group’s business of indigenous multilevel
mechanized car parking systems, pioneered by the Kinetic Group of
India.

Hyundai Elevator Co. Ltd. is the number one company with the
highest market share among Elevator companies in Korea and has
become a major supplier of elevators & escalators in South East Asia, 02-07 Typical Car Designs
India, Middle East, Africa, USA, Japan and Europe.
08-11 Finishing Options
Our Company offers a full line of moving systems meticulous in
12-17 Planning Guide
detail, bringing together some of the most advanced technology and
progressive designs in the industry. 18-24 Glass & Observation Elevators
25-28 Freight & Automobile Elevators
Hyundai’s product range includes, in addition to elevators,
escalators and travellators, parking systems, airport logistics (cargo
and baggage handling) systems, automated warehousing systems
and platform screen doors.

The super high-speed elevator test tower at Icheon Headquarters in Korea is

the world's tallest elevator test tower
 Car Design SP - 01 (MS, Powder Coated Finish) Car Design SP - 03 (SS, Hairline Finish)

Car Walls MS, Powder Coated (shade selectable) Car Walls SS, Hairline Finish

Car Door MS, Powder Coated (shade selectable) Car Door SS, Hairline Finish

Car Operating Panel & Type OPP-N240A Car Operating Panel & Type OPP -N240A
Indicator (Indicator PI -D601 separately in transom ) Indicator (indicator PI-D601 separately in transom )

Buttons Type A40 - Braille marked, rugged, Buttons Type A40 - Braille marked, rugged,
self illuminated LED number and ring self illuminated LED number and ring

False Ceiling Flat acrylic, type C -245AS (frame options MS

False Ceiling Flat acrylic in MS Powder Coated Frame
Powder Coated and SS Hairline/ Mirror Finish)
Colored acrylic (standard grey acrylic Colored acrylic (standard grey acrylic or recess
Flooring Flooring
or recess for flooring by others) for flooring by others)

Handrail HR-01A (Tubular, SS) Handrail HR- 01A (Tubular, SS, at rear only)

Fan Axial Flow, Concealed Fan Axial Flow, Concealed

Lighting Fluorescent, indirect Lighting Fluorescent, indirect

02 Note: Car is configurable and price will depend on the final configuration. Selectable options subject to availability at the time of finalization. Note: Car is configurable and price will depend on the final configuration. Selectable options subject to availability at the time of finalization. 03
 Car Design SP - 04 (SS, Mirror Etched and Hairline Finish) Car Design SP - 05 (SS, Mirror and Mirror Etched Finish)

Side panels of each wall: SS, Hairline Finish Side panels of each wall: SS, Mirror Finish
Car Walls Car Walls
Middle panels of each wall: SS, Mirror Etched Middle panels of each wall: SS, Mirror Etched

Car Door SS, Mirror Etched Car Door SS, Mirror Etched

Car Operating Panel & Type OPP-N240A Car Operating Panel & Type OPP-D240B
Indicator (Indicator PI -D601 separately in transom ) Indicator (indicator integral in car operating panel )
Type A40 - Braille marked, rugged, Type A40 – Braille marked, rugged,
Buttons Buttons
self illuminated LED number and ring self illuminated LED number and ring
Curved acrylic, type C-726A (frame options Flat acrylic, type CD289C
False Ceiling False Ceiling (frame options SS Hairline/ Mirror Finish)
MS Powder Coated and SS Hairline/ Mirror Finish)
Colored acrylic (standard grey acrylic Colo red acrylic (standard grey acrylic or recess
Flooring Flooring for flooring by others)
or recess for flooring by others)

Handrail HR-Bar (Flat Bar, SS - at rear only, not shown ) Handrail HR-01B (Tubular, SS, with PVC sleeve )

Fan Axial Flow, Concealed Fan Axial Flow, Concealed

Lighting Fluorescent, indirect, and halogen combination Lighting Fluorescent, indirect

04 Note: Car is configurable and price will depend on the final configuration. Selectable options subject to availability at the time of finalization. Note: Car is configurable and price will depend on the final configuration. Selectable options subject to availability at the time of finalization. 05
 Car Design SP - 07 (SS, Mirror Etched and Hairline Finish) Landing Door Jamb Options

Wide Jamb with Transom

(Jamb Type: JP-200)

For door in illustration:

Door finish special SS hairline etched

Jamb finish SS hairline

Indicator in transom (type PI-D601)

Hall button panel type HPB-240 (box type)

Button Type A40 – Braille marked, rugged,

self illuminated LED number and ring
Note:
Wide jamb with transom provided at main landing by default,
unless otherwise specified.

Narrow Jamb
(Jamb Type: JP-050)

For door in illustration:

Door finish special SS hairline etched

Jamb finish SS hairline

Indicator in architrave (type PI-D611) –

Option integrated indicator and button panel

Hall button panel type HPB-240 (box type)

Button Type A40 – Braille marked, rugged,

self illuminated LED number and ring
Note:
Narrow jamb provided at other landings by default,
unless otherwise specified.

Side panels of each wall: SS, Hairline Finish

Car Walls
Middle panels of each wall: SS, Mirror Etched Wide Jamb (without transom)
(Jamb Type: JP-100)
Car Door SS, Mirror Etched
For door in illustration:
Car Operating Panel & Swing Type (Full Height – Return panel as COP)
Indicator (indicator PI-D601 separately in transom )
Type A40 - Braille marked, rugged, Door finish special SS hairline etched
Buttons
self illuminated LED number and ring
Jamb finish SS hairline
Curved aluminum, type CD519D
False Ceiling
Indicator integral with buttons
Colored acrylic (standard grey acrylic
Flooring
or recess for flooring by others)
Hall indicator and button panel type HIP-D442B (box-less)
Handrail HR-01A (Tubular, SS)
Button Type A40 – Braille marked, rugged,
self illuminated LED number and ring
Fan Axial Flow, Concealed
Note:
Lighting Fluorescent, indirect Wide jamb provided at top landing by default in MRL elevators
(top landing front wall 280/ 340mm thick, to accommodate control panel).

06 Note: Car is configurable and price will depend on the final configuration. Selectable options subject to availability at the time of finalization. Note: Price will change with change in jamb type from default.
Special hairline etching finish doors shown above are illustrative and available as optional extras.
07
 False Ceiling Options Indicator and Button Panels and Hall Lanterns

Car Operating Panels

Type: C245AS (Acrylic in Steel Frame) Type: C421A (Acrylic in Steel Frame)
Steel frame options: Steel frame options:
OPP-N240W
MS, powder coated finish SS, hairline finish MS, powder coated finish SS, hairline finish (Handicapped Type;
A40 Buttons; Indicator Separate)
SS, mirror finish SS, mirror finish
Note: Note:
Available for capacity up to 15-persons Available for capacity up to 15-persons
(similar flat ceiling available for 13 to 24-persons capacity)

Indicator PI-D601
OPP-D241B OPP-D221B OPP-D240B OPP-N240A (Indicator in Car Transom with
(A41 Buttons; (A21 Buttons; (A40 Buttons; (A40 Buttons; Car Operating Panel Types
Integral Indicator) Integral Indicator) Integral Indicator) Indicator Separate) OPP-N240A & OPP-N240W)

Hall Indicator and Button Panels

Type: C726A (Acrylic in Steel Frame) Type: C806A (Acrylic in Steel Frame)
Steel frame options: Steel frame options:
MS, powder coated finish SS, hairline finish SS, hairline finish
SS, mirror finish SS, mirror finish HIP-D240WA HIP-D442WB
(Box Type) (Boxless)
Note: Note:
Available for capacity up to 15-persons only and not for Available for capacity up to 24-persons
deep car (availability for customized cars subject to fitment) (availability for customized cars subject to fitment)
HIP-D442B HIP-D240A HPB-442B HPB-240
(Hall Indicator & (Hall Indicator & (Hall Button Panel, (Hall Button Panel,
Button Panel, Button Panel, Box-less Type Box Type
Box-less Type Box Type A40 Buttons.) A40 Buttons.)
A40 Buttons.) A40 Buttons.)
Indicator PI-D610
Notes: (Indicator in Landing Transom with
Above hall indicator and hall button panels available with A41 and A21 buttons also. Hall Button Panel Types
HPB-442B & HPB-240)

Buttons Hall Lanterns

Type: C807A (Acrylic in Steel Frame) Type: CD519D (Aluminum)

Steel frame options: Note:
SS, hairline finish Available for capacity up to 24-persons
(availability for customized cars subject to fitment)
SS, mirror finish
Note:
Available for capacity up to 24-persons
(availability for customized cars subject to fitment) A -40 A -41 A -21

HLS - 760 HLS - 770 HLS - 640

NOTES:
1. Lift price will vary with the type of ceiling Notes: Notes:
08 2. Default ceiling is of flat acrylic in MS powder coated frame (not shown above) All buttons are Braille marked and Buttons A-40 & A-41 have Hall lantern is optional extra. 09
3. In case of dedicated freight elevators or (service elevators of capacity above 1600 KG), only flat MS powder coated car top is offered as ceiling. number and ring glowing on pressing. Can be put at for all/ select floors.
 Handrails and PVC Flooring SS Etching Patterns and MS Powder Coating Shades

Handrail Options Some SS Etching Patterns Offered

Handrail Type HR-01A

(SS, Hairline Finish)

BB-10 BB-13 BB-16 BG-02 BG-28

Handrail Type HR-BAR

(SS, Hairline Finish)

BG-30 BG-41 BG-12 KJ-62 SE1184

NOTES:
Some photos above are of etching on SS hairline finish base and some of etching on SS mirror finish base.
Handrail Type HR-01B Any pattern can be etched on hairline or mirror finish base SS.
(SS, Hairline Finish with PVC Sleeve) Above samples can be physically shown at the time of final selection.
The above are some of the etching patterns already available. Any other etching pattern required can be developed at extra price.

MS Powder Coating Shades Offered

PVC Flooring Options

P-003 P-005 P-017 P-002

Type FP-08 (Grey) Type FH-01 (Colored)

P-006 P-007 P-020 (Gold) P-021 (Silver)

Type FH-03 (Colored) Type FH-03 (Colored)

NOTES:
P-003, P-005, P-017, P-002, P-006 & P-007 are standard or default shades. Any of these can be selected.
NOTE: P-020 Gold & P-021 Silver are metallic colors and can be provided at extra price.
10 Default PVC flooring is FP-08 (grey). Price will increase on selecting any other. Actual color shades may look different from the illustrations above. Physical samples can be shown at the time of final selection. 11
 Planning Guide Planning Guide

Machine Room Type Elevators – Geared Drive Illustrative Hoist-way Layout - Machine Room Type Elevators

Standard Size (mm) Hoist-way

Capacity Car Door Machine Room
Speed Required
Internal Opening Size (mm) *
M/Sec Persons KG CW x CD DW HW x HD MW x MD
1.0 6 408 1400 x 850 800 1800 x 1480 3000 x 3480
1.5 8 544 1400 x 1030 800 1800 x 1660 3000 x 3660
9 612 1400 x 1100 800 1800 x 1730 3000 x 3730
10 680 1400 x 1250 800 1800 x 1880 3000 x 3880
11 748 1400 x 1350 800 1800 x 2000 3000 x 4000

13 884 1600 x 1350 900 2050 x 2000 3250 x 4000

15 1020 1600 x 1500 900 2050 x 2150 3250 x 4150

17 1156 1800 x 1500 1000 2350 x 2280 3550 x 4280

20 1360 1800 x 1700 1000 2350 x 2480 3550 x 4480

24 1632 2000 x 1750 1100 2550 x 2530 3750 x 4530

Maximum travel 60M at 1.0 MPS and 70M at 1.5 MPS. Plan of Machine Room

( * ) Machine room size shown above is for speed 1.0 MPS. It has to be increased by 500mm in width as well as depth for speed 1.5 MPS.
Machine room height recommended is 2500mm.

Overhead & Pit Depth Required

Speed Overhead Pit Depth

(M/Sec) (mm) (mm)

1.0 4450 1500

1.5 5000 1600
Plan of Hoistway

Above mentioned overhead is applicable to Hyundai’s standard car height of 2500mm and door height of 2100mm

AND

Section of Hoistway

12 13
 Planning Guide Planning Guide

Machine Room Type Elevators – Gearless PMSM Drive Machine Room Less (MRL) Elevators – Gearless PMSM Drive

Standard Size (mm) Hoist-way Standard Size (mm) Hoist-way Top Floor
Machine Room Speed
Capacity Car Door Capacity Car Door Required Front Wall
Speed Required Options
Internal Opening Size (mm) * Internal Opening Thickness
Persons KG M/Sec CW x CD DW HW x HD (mm) *
M/Sec Persons KG CW x CD DW HW x HD MW x MD
1.0 4 272 1.0 900 x 1000 800 (SO) 1500 x 1500 280
8 544 1400 x 1030 800 1800 x 1660 3000 x 3660
1.5 5 340 1.0 1000 x 1100 800 (SO) 1600 x 1500 280
9 612 1400 x 1100 800 1800 x 1730 3000 x 3730
6 408 1.0 1100 x 1150 800 (SO) 1700 x 1550 280
10 680 1400 x 1250 800 1800 x 1880 3000 x 3880 8 544 1.0 1200 x 1250 800 (CO) 1900 x 1650 280
1.0
11 748 1400 x 1350 800 1800 x 2000 3000 x 4000 9 612 1.0 1100 x 1400 800 (CO) 1950 x 1800 280
1.5
1.0 280
1.75 13 884 1600 x 1350 900 2050 x 2000 3250 x 4000
11 748 1.5 1200 x 1575 800 (CO) 2000 x 1975 280
15 1020 1600 x 1500 900 2050 x 2150 3250 x 4150
1.75 280
17 1156 1800 x 1500 1000 2350 x 2280 3550 x 4280 1.0 280
20 1360 1800 x 1700 1000 2350 x 2480 3550 x 4480 15 1020 1.5 1500 x 1600 900 (CO) 2300 x 2000 280

24 1632 2000 x 1750 1100 2550 x 2530 3750 x 4530 1.75 280
1.0 280
13 884 1600 x 1350 900 2300 x 2200 3800 x 4700
17 1156 1.5 1650 x 1650 1000 (CO) 2500 x 2050 280
2.0
15 1020 1600 x 1500 900 2300 x 2350 3800 x 4850 1.75 340
2.5
17 1156 1800 x 1500 1000 2500 x 2350 4000 x 4850 1.0 280
20 1360 1.5 1700 x 1800 1000 (CO) 2600 x 2300 340
20 1360 1800 x 1700 1000 2500 x 2550 4000 x 5050
1.75 340
24 1632 2000 x 1750 1100 2700 x 2600 4200 x 5100
1.0 340
Maximum travel 60M at 1.0 MPS, 70M at 1.5 MPS, 95M at 1.75 MPS and 120M at 2.0 & 2.5 MPS. 24 1632 1.5 1800 x 2000 1100 (CO) 2700 x 2500 340
( * ) Machine room width and depth shown above for speeds' group 1.0, 1.5 & 1.75 MPS are for speeds 1.0 & 1.5 respectively. Machine room 1.75 340
width and depth has to be increased by 500mm respectively for speeds 1.5 & 1.75 MPS (over that shown above for speed 1.0 MPS). Machine
room height recommended is 2500mm.
Maximum travel 60M at 1.0 MPS, 70M at 1.5 MPS and 95M at 1.75 MPS.

( * ) Front wall thickness shown is the minimum required at top floor since control panel is located in top floor front wall, beside the landing
Overhead & Pit Depth Required (mm) door.

Speed Overhead Pit Depth

(M/Sec) (mm) (mm)
Overhead & Pit Depth Required (mm)
1.0 4450 1500 Speed Overhead Pit Depth
(M/Sec) (mm) (mm)
1.5 5000 1600
1.0 4450 1500
1.75 5000 2150
1.5 5000 1600
2.0 5400 2200
1.75 5000 2150
2.5 5600 2500

14 Above mentioned overhead is applicable to Hyundai’s standard car height of 2500mm and door height of 2100mm Above mentioned overhead is applicable to Hyundai’s standard car height of 2500mm and door height of 2100mm 15
 Planning Guide Planning Guide

Illustrative Hoist-way Layout - MRL Elevators Notes on Planning Guide

1. Hyundai's gearless drive is Permanent Magnet Synchronous Motor (PMSM) type and is offered with all steel rope
suspension only, in case of machine room type as well as MRL elevators.

2. Car and machine room sizes and pit depth and overhead requirements shown are based on IS norms as applied in
India (linked to speed and car height) and may differ from those appearing in some Hyundai catalogues.

3. Car and required hoist-way sizes shown for machine room type elevators are with counter-weight at rear. Motor
as well as counterweight come on a side in the hoist-way in case of MRL elevators.

4. Car size can be customized as long as car internal area to capacity ratio and the differences between car
internal width and hoist-way width and car internal depth and hoist-way depth respectively are maintained.
Car internal width variation is offered in multiples of 100mm.

5. Door opening widths shown are all centre opening in case of machine room type elevators and side opening or
telescopic (SO) or centre opening (CO) as shown in the planning table in case of MRL elevators.

6. Standard car internal sizes shown yield area slightly more than permitted in IS in case of some smaller capacity
MRL elevators. Effective area will be reduced by handrail.

Plan of Hoistway 7. Standard minimum MRL lift capacity is 11 persons at speeds 1.5 and 1.75 MPS. Requirement of a lower capacity
elevator at either of these speeds will entail using the drive and related parts meant for 11 person capacity.
Hoist-way size required will be determined by the differences between car internal width and hoist-way width
for11 person capacity.

8. Capacities in between Hyundai's standard capacities (viz. 12 persons, 16 persons or 22 persons) can be offered by
using the drive and related parts meant for the next higher capacity. Car size will be altered so as to not violate
the permitted car internal area to capacity norm. Hoist-way size required will be determined by the differences
between car internal width and hoist-way width and car internal depth and hoist-way depth respectively for the
next higher capacity. However, the hoist-way width required for the next higher capacity will be required to
provide door opening width shown for the next higher capacity.

9. Please refer to Kinetic Hyundai for sizes for machine room type elevators with counterweight on a side (such as
in service elevators with deep car).

10. Pit depth 1600mm mandated in IS is acceptable but 1800mm is recommended at speed at 1.5 MPS.

11. Counterweight safety application is mandatory in case of floating pit (void left below the pits bottom in case of
lift starting from floor other than the lowest). This makes pit depth requirement 400-450mm more. In addition,
an additional concrete slab is required below and at least 300mm below the pit's bottom.

12. Above overhead requirements are with Hyundai's standard lift door height, 2100mm and will be higher for taller
doors. Requirement of taller (2200mm or 2400mm high) doors, hence taller car, may entail use of drive and
related parts meant for a higher capacity due the increased dead load of car (please see point no.14 below).

13. Above machine room sizes are for single elevators. Overall size of a combined machine room for a number of
elevators in a group can be slightly lower than the sum of the individual machine room sizes. Please consult
Kinetic Hyundai for the same.

14. Standard finishing allowance is 10% of the rated capacity. This is sufficient for marble/ granite flooring in 20mm
recess. Higher finishing allowance requirement (or requirement of taller doors, hence taller car) may entail use
of drive and related parts meant for a higher capacity. In such case, hoist-way clearances (differences between
car internal width and hoist-way width and car internal depth and hoist-way depth respectively) will also be
required as applicable to the higher capacity. Taller doors or higher finishing allowance are not offered for MRL
elevators with rated capacity 24 persons. Requirement of 24 person rated capacity machine room type
elevators with taller doors or higher finishing allowance may be referred to Kinetic Hyundai.

16 Section of Hoistway
17
 Nude Elevators Observation Elevators Machine Room Type Only

(All Sides Glass in SS Frame)

Capsule Type: SHGQ015

Glass Window 3 Piece Safety Glass

Outer Domes SS, Hairline Finish

Car Walls SS, Hairline Finish (Options SS Mirror Finish /

Etched and Mild Steel Powder Coated)

Flooring Grey PVC Tiles /

20mm Recess for Flooring by Others

Ceiling Acrylic in SS hairline Finish Frame

with Decorative Punching Pattern Lighting

Notes:
Capacity Minimum 11 persons (748 KG),
Maximum 20 persons (1360 KG)
Speed - Maximum 1.75 MPS

Planning Guide for Capsule

SQGQ015

Standard Size (mm) Hoist-way Required # Machine Room

Speed Capacity
Mean Car Door RCC Part for Size (mm) *
Internal Opening Overall
Counterweight
M/Sec Persons KG CW x CD DW HW x HD SW x SD MW x MD
Machine Room Type (Geared /Gearless PMSM Drive)
1.0 11 748 1100 x 1500 800 (CO) 2450 x 2300 550 x 1100 3650 x 4300
1.5 15 1020 1200 x 1800 900 (CO) 2650 x 2450 550 x 1250 3850 x 4450
1.75 20 1360 1400 x 2000 1000 (CO) 2850 x 2700 550 x 1350 4050 x 4700
All sides of glass in SS frame
Maximum travel 60M at 1.0 MPS, 70M at 1.5 MPS and 95M at 1.75 MPS.
Doors too of glass in SS frame (optional)
SS frame of mirror finish or hairline finish
Offered with Machine Room (geared as well as gearless drive) as well MRL Overhead & Pit Depth Required (mm)
drive Speed Overhead Pit Depth
(M/Sec) (mm) (mm)
Maximum capacity offered 20-persons (1360 KG). Higher capacity (upto 24-
1.0 4900 2000 Notes:
persons) available as special product. 1. ( # ) Overall hoist-way size including glass cladding at rear.
1.5 5050 2200 2. ( * ) Please see footnote on page no.14 on increase in machine room
depth requirement with speed.
3. Please see Notes on Planning Guide on page no.17.
1.75 5200 2200
18 NOTE: Please contact Kinetic Hyundai for more details. 19
 Observation Elevators Machine Room Type As Well As MRL Observation Elevators Machine Room Type As Well As MRL

Capsule Type: SHGQ004 Capsule Type: SHGQ007

Glass Window 3 Piece Safety Glass Glass Window 3 Piece Safety Glass

Outer Domes MS Powder Coated with Punching Pattern Lighting

Outer Domes Milky White Acrylic
(Option SS Hairline Finish)

Car Walls SS, Hairline Finish (Options SS Mirror Finish / Car Walls SS, Hairline Finish (Options SS Mirror Finish /
Etched and Mild Steel Powder Coated) Etched and Mild Steel Powder Coated)

Flooring Grey PVC Tiles / Flooring Grey PVC Tiles /

20mm Recess for Flooring by Others 20mm Recess for Flooring by Others

Ceiling Milky White Acrylic in MS Powder Coated Frame Ceiling Milky White Acrylic in MS Powder Coated Frame
with Decorative Lighting with Decorative Lighting

Capsule Type: SC-846A Capsule Type: SHGQ008

Glass Window 3 Piece Safety Glass Glass Window 3 Piece Safety Glass

Outer Domes Milky White Acrylic Outer Domes SS, Hairline Finish, With Lights

SS, Hairline Finish (Options SS Mirror Finish / Car Walls SS, Hairline Finish (Options SS Mirror Finish /
Car Walls
Etched and Mild Steel Powder Coated) Etched and Mild Steel Powder Coated)

Grey PVC Tiles / Flooring Grey PVC Tiles /

Flooring 20mm Recess for Flooring by Others
20mm Recess for Flooring by Others

Acrylic in MS Powder Coated Frame Ceiling Milky White Acrylic in MS Powder Coated Frame
Ceiling with Decorative Lighting
with Decorative Lens Lighting

Notes: Notes:
Capacity (Machine Room Type) Minimum 11 persons (748 KG), Maximum 20 persons (1360 KG) Capacity (Machine Room Type) Minimum 11 persons (748 KG), Maximum 20 persons (1360 KG)
20 Capacity (MRL) - Minimum 11 persons (748 KG), Maximum 15 persons (1020 KG) Capacity (MRL) - Minimum 11 persons (748 KG), Maximum 15 persons (1020 KG) 21
Speed - Maximum 1.75 MPS Speed - Maximum 1.75 MPS
 Observation Elevators Machine Room Type As Well As MRL Observation Elevators Machine Room Type As Well As MRL

Planning Guide for Capsules

SHGQ004, SHGQ007, SHGQ008 & SC-846A
Capsule Type: SHGQ-F02
Standard Size (mm) Hoist-way Required # Machine Room
Speed Capacity Rear Wall of Safety Glass
Mean Car Door RCC Part for Size (mm) * Glass Window
(Corner to Corner)
Internal Opening Overall
Counterweight
M/Sec Persons KG CW x CD DW HW x HD SW x SD MW x MD Outer Rear Panel MS Powder Coated

Machine Room Type (Geared /Gearless PMSM Drive)

Car Walls SS, Hairline Finish (Options SS Mirror Finish /
1.0 11 748 1400 x 1500 800 (CO) 2500 x 2100 550 x 1200 3700 x 4100
Etched and Mild Steel Powder Coated)
1.5 15 1020 1500 x 1750 900 (CO) 2600 x 2350 550 x 1350 3800 x 4350
1.75 20 1360 1700 x 1980 1000 (CO) 2850 x 2550 550 x 1500 4050 x 4550 Flooring Grey PVC Tiles /
20mm Recess for Flooring by Others
MRL (Gearless PMSM Drive)
1.0 11 748 1300 x 1710 800 (CO) 2200 x 2250 440 x 1250 NA Ceiling Acrylic in MS Powder Coated Frame
with Decorative Lighting
1.5
15 1020 1350 x 1900 900 (CO) 2350 x 2450 390 x 1325 NA
1.75
Maximum travel 60M at 1.0 MPS, 70M at 1.5 MPS and 95M at 1.75 MPS.

Planning Guide for Capsules

SHGQ-F02 & SHGQ002
Standard Size (mm) Hoist-way Required # Machine Room
Speed Capacity
Mean Car Door RCC Part for Size (mm) *
Internal Opening Overall
Counterweight
M/Sec Persons KG CW x CD DW HW x HD SW x SD MW x MD
Machine Room Type (Geared /Gearless PMSM Drive) Capsule Type: SHGQ002
1.0 11 748 1400 x 1350 800 (CO) 2350 x 1950 550 x 1200 3550 x 3950 Rear Wall of Safety Glass
1.5 15 1020 1600 x 1500 900 (CO) 2600 x 2100 550 x 1350 3800 x 4100 Glass Window
(End to End)
1.75 20 1360 1800 x 1700 1000 (CO) 2900 x 2300 550 x 1500 4100 x 4300
Outer Rear Panel MS Powder Coated
MRL (Gearless PMSM Drive)
1.0 9 630 1100 x 1400 800 (CO) 1950 x 1950 Full H’way Depth NA
Car Walls SS, Hairline Finish (Options SS Mirror Finish /
1.5 11 750 1300 x 1470 800 (CO) 2050 x 2000 Full H’way Depth NA Etched and Mild Steel Powder Coated)
1.75 15 1020 1400 x 1550 900 (CO) 2250 x 2100 Full H’way Depth NA
Flooring Grey PVC Tiles /
Maximum travel 60M at 1.0 MPS, 70M at 1.5 MPS and 95M at 1.75 MPS. 20mm Recess for Flooring by Others

Ceiling Milky White Acrylic in MS Powder Coated Frame

with Decorative Lighting

Overhead & Pit Depth Required (mm)

Speed Overhead Pit Depth
(M/Sec) (mm) (mm)
1.0 4900 2000 Notes:
1. ( # ) Overall hoist-way size including glass cladding at rear.
2. ( * ) Please see footnote on page no.14 on increase in machine room
1.5 5050 2200 depth requirement with speed.
3. Please see table on page no.15 for top floor front wall thickness
1.75 5200 2200 requirement for MRL elevators.
4. Please see Notes on Planning Guide on page no.17.

Notes:
Capacity (Machine Room Type) Minimum 11 persons (748 KG), Maximum 20 persons (1360 KG)
22 Capacity (MRL) -
Speed -
Minimum 11 persons (748 KG), Maximum 15 persons (1020 KG)
Maximum 1.75 MPS
23
 Observation Elevators Machine Room Type As Well As MRL Freight & Automobile Elevators

Illustrative Hoist-way Layout - Observation Elevators

Plan of Hoistway
Capsules SHGQ004, SHGQ007,
SHGQ008 & SC-846A

Plan of Hoistway
Capsules SHGQ-F02, SHGQ002

Section of Hoistway - MRL Section of Hoistway - Machine Room Type

Plan of Hoistway
Capsule SHGQ015

24 NOTE: Hoist-way sections for MRL and Machine Room Type shown for one capsule type each for illustration. Will be similar for other capsules. 25
 Freight Elevators - Planning Guide Freight Elevators - Planning Guide
General Type (2S, 2SCO, 2U)

Plan of Hoistway & Machine Room Entrance CAR Hoistway

Speed M/C Room
Model Door Width x Entrance Internal External Overhead
MX (m/min) XxY (MX x MY)
Opening Height Type CA x C AxB (OH)
X
A
30 Standard 1480 x 1900 2300 x 2200
F1000-2S 45 2S 1200 X 2100 1400 x 1700 1480 x 2020 2300 x 2320 4800 3200 x 3500
60 Double
Entrance

Vent Grille (By others)

(By others)
Vent Fan

30 Standard 1860 x 2000 2700 x 2300

Section of Hoistway F1500-2S 45 2S 1500 X 2100 1800 x 1800 1880 x 2120 2700 x 2430 4800 3600 x 4000
60 Double
Entrance
CB
B
Y

30 Standard 1980 x 2310 2950 x 2600

Suspension Hook (By Others) 2950 x 2740 4800
MY

F2000-2SCO 45 2SCO 1600 X 2100 1980 x 2440 3600 x 4000

R2

Height (MH)
Double

M/C Room
CA
Cinder Concrete 60
Min. 150 Entrance 1900 x 2100

Access Door(By Others)

(By others)
30 Standard

900(W) x 2000(H)
2U 1900 X 2100 1980 x 2298 2950 x 2700
F2000-2U 4600

Machine Room
45 2950 x 2876 3800 x 4200
Double 1980 x 2416
60
OP Entrance
Distribution Board(By Others)
30 Standard
2S 1700 X 2100 2100 x 2300 2180 x 2510 3100 x 2800

Overhead(OH)
F2500-2SCO 45 4800 4000 x 4400
Double 2180 x 2640 3100 x 2940
(60)
Entrance
2-Panel Side-Opening Doors (2S)
30 Standard
2U 2100 X 2100 2180 x 2498 3100 x 2900
(Note) Temperatures should be maintained below 40oC with ventilating fan F2500-2U 45 4600 4000 x 4400
and / or air conditioner (if necessary) and humidity below 90% Double 2180 x 2616 3100 x 3076
(60)
Entrance
Total Height (TH)

30 Standard
2SCO 1800 X 2300 2300 x 2500 2380 x 2710 3300 x 3000
F3000-2SCO 45 4800 4200 x 4800
Double 2380 x 2840 3300 x 3140
Entrance

30 Standard
2U 2300 X 2100 2380 x 2698 3300 x 3100
F3000-2U
Travel (TR)

45 3300 x 3276 5000 4300 x 5200

Double 2380 x 2816
Entrance
Standard
30

Ent. Height (EH)

25 3700 x 3400
120

F4000-2SCO 2SCO 2000 X 2100 2500 x 2900 2580 x 3110 5300

30 3700 x 3540 4500 x 5900
OP Double 2580 x 3240
Entrance

25 Standard
Depth (PP)

4-Panel Center Opening Doors (2SCO) 2U 2500 X 2100 2580 x 3098 3700 x 3500
F4000-2U 30 5500 4700 x 6400
Pit

Double 2580 x 3216 3700 x 3676

Entrance
R3 R4 Waterproof finish
(By others) Note : 1. The loading capacity should be over 250 kg/m2 minimally
Receptacle 2. The actual reaction may slightly differ from above dimensions in line with machine beam position.
(By others)
30
200

Building Requirements
Wall - finished

50 OP 50

Speed PIT M/C Room Height

(m/min) (PP) (MH)
2-Panel Up-Sliding Doors (2U)
Ÿ Minimum floor height : opening Height x 3/2 + 450mm
30, 45 1350 2400
Ÿ Minimum entrance height : 2100mm
60 1500 2600

26 27
 Standard Features for Passenger & Freight Elevators

 Selective Collective Control Selective automatic operation by collective all call signals
 VVVF Inverter Drive With Accurately adjusts motor speed, which makes elevator start, run and stop smoothly.
Close Loop Encoder
Feedback
 VVVF Inverter Door Drive Accurately adjusts door motor speed, which makes door start, open & close and stop
With Close Loop Encoder smoothly.
Feedback
 Inspection Operation When inspection switch actuates car inching operation at speed 0.3m/s.
 Automatic Overload Bypass Crowded car with load more than a preset value bypasses hall calls.
 Fireman’s Emergency Return When the key switch at main floor is activated or signal is received from fire detection
and Fireman’s Emergency system, all calls are canceled and car returns immediately to main floor, then door
Operation opens. Thereafter car responds only to car call, to facilitate rescue.
 Car Arrival Chime Electronic chime mounted on car top sounds to indicate the car's arrival.
 Dot Matrix Display Indication Car position displays inside car and on landings with scrolling arrow to indicate the
direction in which the car is running.
 Reverse Car Call When the car responds to the final car call in one direction, the system automatically
Cancellation clears the remaining calls in the other direction from its memory.
 False Call Canceling – If a mistake is made when pressing a floor button, simply pressing the same button
Button Operation again cancels the call.
 False Call Canceling – If the number of car calls registered is not in proportion with the lift’s capacity, all calls
Automatic are canceled in order to avoid unnecessary stops.
 Owner Skip Operation Temporarily locking (by-passing) a floor as per customer’s requirement.
 Ventilation Fan Lift is fitted with sound free axial flow fan fitted above and hidden by false ceiling.
 Car Ventilation Auto Shut Off If there is no call registered within a predetermined period of time, i.e. the elevator is
idle, car fan is automatically shut off to conserve energy.
 Car Light Auto Shut Off If there is no call registered within a predetermined period of time, i.e. the elevator is
idle, car light is automatically shut off to conserve energy.
 Overload Holding St op Overloaded car cannot leave the floor and a buzzer is sounded.
 Attendant Service Elevators can be changed over to attendant service from normal full automatic
-
operation by an override switch in the car operating panel.
 Repeated Door Closing and If an obstacle prevents the doors from closing, the doors repeatedly open and close
Openi ng until the obstacle is cleared.
 Lift Operation Counter The controller records the number of elevator running operations performed.
 Fault Indication When elevator stops due to a fault, the fault is recorded and displayed in the
controller.
 Emergency Car Lighting When power fails, battery operated emergency light in car turns ON immediately.
 Multi-beam Door Protection Multiple infrared -light beams cover the full width and height of the door as the door
opens or closes, to detect passengers or objects.
 Interphone with Battery Back A three way interphone system comprising a press and speak unit in car operating
Up panel for the passengers and handset each at lift control panel and main lobby.

Optional Features
 Safety Edge Door Protection Conventional sensitive mechanical door edge to detect pressure from passenger and
objects, in lieu of or together with multi
- beam protection.
 Voice Synthesizer Floor and elevator status announcement.
 Duplex Control Optimizes the operation of a pair of elevators by dispatching the nearest car to attend
a call.
 Group Control Optimizes the operation of a group of 3 to 8 cars by minimizing waiting time, zonal
distribution and energy conservation.
 Auxiliary Car Operating Extra car operating panel in large-capacity elevator for passenger convenience. Can
Panel be regular vertical layout type or handicap type.
 Swing Type Car Operating Full height car operating panel– an entire return panel forms the car operating panel
Panel plate.
 Emergency Landing Device In case of normal power’s failure, a rechargeable battery moves the car to the
ELD (Automatic Rescue nearest floor.
Device ARD)
 Dual Floor Fireman’s In case of fire sign al from the building’s fire detection system, return to a floor other
Emergency Return than the main floor if the fire signal is from the main floor.
 Supervisory Panel Common display panel (for building control room or lobby or security room) with a car
position and status display for each lift.
 Hall Lantern Predictive attractive flashing up and down indicator lights above the landing doors of
lifts in a group to indicate to waiting passengers the lift expected to arrive at the floor.
28  BMS contact Potential free contacts for BMS at lift control panel, with signals on lift position and 29
status.