Seminar Report 2010-2011 5G Mobile Technology

ABSTRACT

5G technologies will change the way most high-bandwidth users access

their phones. With 5G pushed over a VOIP-enabled device, people will
experience a level of call volume and data transmission never experienced
before.5G technology is offering the services in Product Engineering,
Documentation, supporting electronic transactions (e-Payments, e-transactions)
etc. As the customer becomes more and more aware of the mobile phone
technology, he or she will look for a decent package all together, including all
the advanced features a cellular phone can have. Hence the search for new
technology is always the main motive of the leading cell phone giants to out
innovate their competitors. Recently apple has produced shivers all around the
electronic world by launching its new handset, the I-phone. Features that are
getting embedded in such a small piece of electronics are huge.

Dept. of E&C Engg. 1 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

CONTENTS

1. INTRODUCTION

2. NETWORK ARCHITECTURE

3. MIX-BANDWIDTH DATA PATH DESIGN

4. MOBILE - WIRELESS GRIDS

5. KEY CONCEPTS OF 5G

6. FEATURES OF 5G NETWORKS TECHNOLOGY

7. CONCLUSION

8. REFERENCES

Dept. of E&C Engg. 2 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

INTRODUCTION

The present cell phones have it all. Today phones have everything
ranging from the smallest size, largest phone memory, speed dialing, video
player, audio player, and camera and so on. Recently with the development of
Pico nets and Blue tooth technology data sharing has become a child's play.
Earlier with the infrared feature you can share data within a line of sight that
means the two devices has to be aligned properly to transfer data, but in case of
blue tooth you can transfer data even when you have the cell phone in your
pocket up to a range of 50 meters. The creation and entry of 5G technology into
the mobile marketplace will launch a new revolution in the way international
cellular plans are offered.

The global mobile phone is upon the cell phone market. Just around the
corner, the newest 5G technologies will hit the mobile market with phones used
in China being able to access and call locally phones in Germany. Truly
innovative technology changing the way mobile phones will be used. With the
emergence of cell phones, which are similar to a PDA, you can now have your
whole office within the phone. Cell phones will give tough competitions to
laptop manufacturers and normal computer designers. Even today there are
phones with gigabytes of memory storage and the latest operating systems.
Thus one can say that with the current trends, the industry has a real bright
future if it can handle the best technologies and can produce affordable
handsets for its customers. Thus you will get all your desires unleashed in the
near future when these smart phones take over the market. 5G Network's router
and switch technology delivers Last Yard Connectivity between the Internet
access provider and building occupants. 5G's technology intelligently
distributes Internet access to individual nodes within the building.

Dept. of E&C Engg. 3 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

2G-5G NETWORKS

The first generation of mobile phones was analog systems that emerged
in the early 1980s. The second generation of digital mobile phones appeared in
1990s along with the first digital mobile networks. During the second
generation, the mobile telecommunications industry experienced exponential
growth in terms of both subscribers and value-added services. Second
generation networks allow limited data support in the range of 9.6 kbps to 19.2
kbps. Traditional phone networks are used mainly for voice transmission, and
are essentially circuit-switched networks.

2.5G networks, such as General Packet Radio Service (GPRS), are an

extension of 2G networks, in that they use circuit switching for voice and
packet switching for data transmission resulting in its popularity since packet
switching utilizes bandwidth much more efficiently. In this system, each user’s
packets compete for available bandwidth, and users are billed only for the
amount of data transmitted.

3G networks were proposed to eliminate many problems faced by 2G

and 2.5G networks, especially the low speeds and incompatible technologies
such as Time Division Multiple Access (TDMA) and Code Division Multiple
Access (CDMA) in different countries. Expectations for 3G included increased
bandwidth; 128 Kbps for mobile stations, and 2 Mbps for fixed applications. In
theory, 3G should work over North American as well as European and Asian
wireless air interfaces. In reality, the outlook for 3G is not very certain. Part of
the problem is that network providers in Europe and North America currently
maintain separate standards’ bodies (3GPP for Europe and Asia; 3GPP2 for
North America). The standards’ bodies have not resolved the differences in air
interface technologies.

Dept. of E&C Engg. 4 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
There is also a concern that in many countries 3G will never be
deployed due to its cost and poor performance. Although it is possible that
some of the weaknesses at physical layer will still exist in 4G systems, an
integration of services at the upper layer is expected.

The evolution of mobile networks is strongly influenced by business

challenges and the direction mobile system industry takes. It also relates to the
radio access spectrum and the control restrictions over it that varies from
country to country. However, as major technical advances are being
standardized it becomes more complex for industry alone to choose a suitable
evolutionary path. Many mobile system standards for Wide Area Networks
(WANs) already exists including the popular ones such as Universal Mobile
Telecommunications Systems (UMTS), CDMA, and CDMA-2000 (1X/3X). In
addition there are evolving standards for Personal Area Networks (PANs), such
as Bluetooth wireless, and for WLANs, such as IEEE 802.11.

The current trend in mobile systems is to support the high bit rate data
services at the downlink via High Speed Downlink Packet Access (HSDPA). It
provides a smooth evolutionary path for UMTS networks to higher data rates in
the same way as Enhanced Data rates for Global Evolution (EDGE) do in
Global Systems for Mobile communication (GSM). HSPDA uses shared
channels that allow different users to access the channel resources in packet
domain. It provides an efficient means to share spectrum that provides support
for high data rate packet transport on the downlink, which is well adapted to
urban environment and indoor applications.

Initially, the peak data rates of 10 Mbps may be achieved using HSPDA.
The next target is to reach 30 Mbps with the help of antenna array processing
technologies followed by the enhancements in air interface design to allow
even higher data rates.

Dept. of E&C Engg. 5 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
Another recent development is a new framework for mobile networks
that is expected to provide multimedia support for IP telecommunication
services, called as IP Multimedia Subsystems (IMS). Real-time rich multimedia
communication mixing telecommunication and data services could
happen due to IMS in wireline broadband networks. However, mobile
carriers cannot offer their customers the freedom to mix multimedia
components (text, pictures, audio, voice, video) within one call. Today a two
party voice call cannot be extended to a multi-party audio and video
conference. IMS overcomes such limitations and makes these scenarios
possible.

The future of mobile systems is largely dependent upon the development

and evolution of 4G systems, multimedia networking, and upto some extent,
photonic networks. It is expected that initially the 4G mobile systems will be
used independent from other technologies. With gradual growth of high speed
data support to multimegabits per second, an integrations of services will
happen. In addition, developments in photonic switching might allow mobile
communication on a completely photonic network using Wavelength Division
Multiplexing (WDM) on photonic switches and routers. The evolutionary view
of 4G systems to 5G include a support of wireless world wide web allowing a
highly flexible and reconfigurable dynamic adhoc networks.

Dept. of E&C Engg. 6 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

NETWORK ARCHITECTURE

The basic architecture of wireless mobile system consists of a mobile

phone connected to the wired world via a single hop wireless connection to a
Base Station (BS), which is responsible for carrying the calls within its region
called cell (Figure 1). Due to limited coverage provided by a BS, the mobile
hosts change their connecting base stations as they move from one cell to
another.

Figure 1: Wireless Mobile System Network Architecture

A hand-off (later referred to as “horizontal handoff” in this article)

occurs when a mobile system changes its BS. The mobile station communicates
via the BS using one of the wireless frequency sharing technologies such as
FDMA, TDMA, CDMA etc. Each BS is connected to a Mobile Switching
Center (MSC) through fixed links, and each MSC is connected to others via

Dept. of E&C Engg. 7 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
Public Switched Telephone Network (PSTN). The MSC is a local switching
exchange that handles switching of mobile user from one BS to another. It also
locates the current cell location of a mobile user via a Home Location Register
(HLR) that stores current location of each mobile that belongs to the MSC. In
addition, the MSC contains a Visitor Locations Register (VLR) with
information of visiting mobiles from other cells. The MSC is responsible for
determining the current location of a target mobile using HLR, VLR and by
communicating with other MSCs. The source MSC initiates a call setup
message to MSC covering target area for this purpose.

Figure 2: Mobile System/WLAN Integration

The first generation cellular implementation consisted of analog systems

in 450-900 MHz frequency range using frequency shift keying for signaling
and Frequency Division Multiple Access (FDMA) for spectrum sharing. The
second generation implementations consist of TDMA/CDMA implementations
with 900, 1800 MHz frequencies. These systems are called GSM for Europe
and IS-136 for US. The respective 2.5G implementations are called GPRS and
CDPD followed by 3G implementations.

Dept. of E&C Engg. 8 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
Third generation mobile systems are intended to provide a global
mobility with wide range of services including voice calls, paging, messaging,
Internet and broadband data. IMT-2000 defines the standard applicable for
North America. In Europe, the equivalent UMTS standardization is in progress.
In 1998, a Third Generation Partnership Project (3GPP) was formed to unify
and continue the technical specification work. Later, the Third Generation
Partnership Project 2 (3GPP2) was formed for technical development of
CDMA-2000 technology.

3G mobile offers access to broadband multimedia services, which is

expected to become all IP based in future 4G systems. However, current 3G
networks are not based on IP; rather they are an evolution from existing 2G
networks. Work is going on to provide 3G support and Quality of Service
(QoS) in IP and mobility protocols. The situation gets more complex when we
consider the WLAN research and when we expect it to become mobile. It is
expected that WLANs will be installed in trains, trucks, and buildings. In
addition, it may just be formed on an ad-hoc basis (like ad-hoc networks)
between random collections of devices that happen to come within radio range
of one another (Figure 2).

In general, 4G architecture includes three basic areas of connectivity;

PANs (such as Bluetooth), WANs (such as IEEE 802.11), and cellular
connectivity. Under this umbrella, 4G will provide a wide range of mobile
devices that support global roaming. Each device will be able to interact with
Internet-based information that will be modified on the fly for the network
being used by the device at that moment (Figure 3). In 5G mobile IP, each cell
phone is expected to have a permanent "home" IP address, along with a "care-
of" address that represents its actual location. When a computer somewhere on
the Internet needs to communicate with the cell phone, it first sends a packet to
the phone's home address.

Dept. of E&C Engg. 9 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

Figure 3: Seamless Connection of Networks in 4G

A directory server on the home network forwards this to the care-of

address via a tunnel, as in regular mobile IP. However, the directory server also
sends a message to the computer informing it of the correct care-of address, so
future packets can be sent directly. This should enable TCP sessions and HTTP
downloads to be maintained as users move between different types of
networks. Because of the many addresses and the multiple layers of subnetting,
IPv6 is needed for this type of mobility.

For instance, 128 bits (4 times more than current 32 bit IPv4 address)
may be divided into four parts (I thru IV) for supporting different functions.
The first 32-bit part (I) may be defined as the home address of a device while
the second part (II) may be declared as the care-of address allowing
communication between cell phones and personal computers. So once the
communication path between cell and PC is established, care-of address will be
used instead of home address thus using the second part of IPv6 address.

Dept. of E&C Engg. 10 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
Table 1: Comparison of 1G-4G Technologies

The third part (III) of IPv6 address may be used for tunneling to
establish a connection between wire line and wireless network. In this case an
agent (a directory server) will use the mobile IP address to establish a channel
to cell phones. The fourth and last part (IV) of IPv6 address may be used for
local address for VPN sharing. Figure 4 illustrates the concept.

The goal of 4G and 5G is to replace the current proliferation of core

mobile networks with a single worldwide core network standard, based on IPv6
for control, video, packet data, and voice. This will provide uniform video,
voice, and data services to the mobile host, based entirely on IPv6.

Dept. of E&C Engg. 11 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
The objective is to offer seamless multimedia services to users
accessing an all IP-based infrastructure through heterogeneous access
technologies. IPv6 is assumed to act as an adhesive for providing global
connectivity and mobility among networks.

Figure 4: IPv6 address divided into four IPv4 addresses for supporting
4G/5G functions.

Most of the wireless companies are looking forward to IPv6, because

they will be able to introduce new services. The Japanese government is
requiring all of Japan's ISPs to support IPv6 with its first 4G launch. Although
the US upgrade to IPv6 is less advanced, WLAN’s advancement may provide a
shortcut to 4G.

Dept. of E&C Engg. 12 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

MIX-BANDWIDTH DATA PATH DESIGN

CDMA development group (CDG) has issued convergence architecture

for 4G, which combined pico cell, micro cell, macro cell and global area shown
in Figure5. This architecture clearly shows that in pico-cell area, there are four
wireless network covered, in micro cell area, there are three wireless network
covered, in macro cell area, there are two wireless network covered at least.
The problem is for any users at a certain place and time, it is one network
supply wireless services for them, the others keep wireless network resources
waste. 5G is real wireless world, it is completed wireless communication. We
design mix-bandwidth data path for 5G so that all wireless network resource
can be used efficiently.

Figure5: 4G Convergence Architecture

Mix-Bandwidth Data Path Model Design

In order to design mix-bandwidth data path, we propose a new data
model as shown in Figure6. This model based on any two networks overlay
area. When a mobile node comes into the overlay area, both of the two
networks can supply services for the mobile node simultaneously.
Dept. of E&C Engg. 13 A.W.H.Engineering College
Seminar Report 2010-2011 5G Mobile Technology
Data request can be sent from any one network, and reply can be from
any other network.

Figure 6: Mix-bandwidth Data Path Model

In this model, the MN request can go through the first connection (MN
→ BS → PDSN → CN) and the resulting reply can come from the second
connection (CN → PDSN → AP → MN). Thus, two networks supply services
for the mobile node simultaneously. Following this model, we propose mix-
bandwidth data path shown in Figure3, which contains four components. They
are bandwidth management, bandwidth selection, packet receiver and
bandwidth monitor.

Dept. of E&C Engg. 14 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

MOBILE - WIRELESS GRIDS

Mobile computing is an aspect that plays seminal role in the

implementation of 4G Mobile Communication Systems since it primarily
centers upon the requirement of providing access to various communications
and services every where, any time and by any available means. Presently, the
technical solutions for achieving mobile computing are hard to implement since
they require the creation of communication infrastructures and the modification
of operating systems, application programs and computer networks on account
of limitations on the capability of a moving resource in contrast to a fixed one.
.
In the purview of Grid and Mobile Computing, Mobile Grid is a heir of
Grid, that addresses mobility issues, with the added elements of supporting
mobile users and resources in a seamless, transparent, secure and efficient way.
It has the facility to organize underlying ad-hoc networks and offer a self-
configuring Grid system of mobile resources (hosts and users) connected by
wireless links and forming random and changeable topologies.

The mobile Grid needs to be upgraded from general Grid concept to

make full use of all the capabilities that will be available; these functionalities
will involve end-to-end solutions with emphasis on Quality of Service (QoS)
and security, as well as interoperability issues between the diverse technologies
involved. Further, enhanced security policies and approaches to address large
scale and heterogeneous environments will be needed. Additionally, the
volatile, mobile and poor networked environments have to be addressed with
adaptable QoS aspects which have to be contextualized with respect to users
and their profiles.

Dept. of E&C Engg. 15 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

Wireless Grids
Grid computing lets devices connected to the Internet, overlay peer-to-
peer networks, and the nascent wired computational grid dynamically share
network connected resources in 4G kind of scenario. The wireless grid extends
this sharing potential to mobile, nomadic, or fixed-location devices temporarily
connected via ad hoc wireless networks. As Fig. 7 shows, users and devices can
come and go in a dynamic wireless grid, interacting with a changing landscape
of information resources. Following Metcalfe’s law, grid-based resources
become more valuable as the number of devices and users increases. The
wireless grid makes it easier to extend grid computing to large numbers of
devices that would otherwise be unable to participate and share resources.
While grid computing attracts much research, resource sharing across small, ad
hoc, mobile, and nomadic grids draws much less.

Wireless grids, a new type of resource-sharing network, connect sensors,

mobile phones, and other edge devices with each other and with wired grids.
Ad hoc distributed resource sharing allows these devices to offer new resources
and locations of use for grid computing. In some ways, wireless grids resemble
networks already found in connection with agricultural, military, transportation,
air-quality, environmental, health, emergency, and security systems.

A range of institutions, from the largest governments to very small

enterprises, will own and at least partially control wireless grids. To make
things still more complex for researchers and business strategists, users and
producers could sometimes be one and the same. Devices on the wireless grid
will be not only mobile but nomadic - shifting across institutional boundaries.
Just as real-world nomads cross institutional boundaries and frequently move
from one location to another, so do wireless devices.

Dept. of E&C Engg. 16 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

Figure 7. Dynamic and fixed weless grids.

The following classification offers one way to classify wireless grid

applications.
• Class 1: Applications aggregating information from the range of
input/output interfaces found in nomadic devices.
• Class 2: Applications leveraging the locations and contexts in which
the devices exist.
• Class 3: Applications leveraging the mesh network capabilities of
groups of nomadic devices.

The three classes of wireless grid applications conceptualized here are

not mutually exclusive. Understanding more about the shareable resources, the
places of use, and ownership and control patterns within which wireless grids
will operate might assist us in visualizing these future patterns of wireless grid
use.

Dept. of E&C Engg. 17 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
The Grid, is a promising emerging technology that enables the simple
“connect and share” approach analogously to the internet search engines that
apply the “connect and acquire information” concept. Thus, mobile/wireless
grids is an ideal solution for large scale applications which are the pith of 4G
mobile communication systems, besides, this grid-based-approach will
potentially increase the performance of the involved applications and utilization
rate of resources by employing efficient mechanisms for resource management
in the majority of its resources, that is, by allowing the seamless integration of
resources, data, services and ontologies. Figure 2 places wireless grids in
context, illustrating how they span the technical approaches and issues of Web
services, grid computing, P2P systems, mobile commerce, ad hoc networking,
and spectrum management. How sensor and mesh networks will ultimately
interact with software radio and other technologies to solve wireless grid
problems requires a great deal of further research, but Figure 4 at least captures
many of the main facets of a wireless grid.

Dept. of E&C Engg. 18 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

KEY CONCEPTS OF 5G

Suggested in research papers discussing 5G and beyond 4G wireless

communications are:
• Real wireless world with no more limitation with access and zone
issues.
• Wearable devices with AI capabilities.
• Internet protocol version 6 (IPv6), where a visiting care-of mobile
IP address is assigned according to location and connected network.
• One unified global standard.
• Pervasive networks providing ubiquitous computing: The user
can simultaneously be connected to several wireless access technologies
and seamlessly move between them (See Media independent handover or
vertical handover, IEEE 802.21, also expected to be provided by future
4G releases). These access technologies can be a 2.5G, 3G, 4G or 5G
mobile networks, Wi-Fi, WPAN or any other future access technology.
In 5G, the concept may be further developed into multiple concurrent
data transfer paths.
• Cognitive radio technology, also known as smart-radio: allowing
different radio technologies to share the same spectrum efficiently by
adaptively finding unused spectrum and adapting the transmission
scheme to the requirements of the technologies currently sharing the
spectrum. This dynamic radio resource management is achieved in a
distributed fashion, and relies on software defined radio.
• High altitude stratospheric platform station (HAPS) systems.

The radio interface of 5G communication systems is suggested in a

Korean research and development program to be based on beam division
multiple access (BDMA) and group cooperative relay techniques.

Dept. of E&C Engg. 19 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

FEATURES OF 5G NETWORKS TECHNOLOGY

• 5G technology offer high resolution for crazy cell phone user and
bi-directional large bandwidth shaping.
• The advanced billing interfaces of 5G technology makes it more
attractive and effective.
• 5G technology also providing subscriber supervision tools for
fast action.
• The high quality services of 5G technology based on Policy to
avoid error.
• 5G technology is providing large broadcasting of data in Gigabit
which supporting almost 65,000 connections.
• 5G technology offer transporter class gateway with unparalleled
consistency.
• The traffic statistics by 5G technology makes it more accurate.
• Through remote management offered by 5G technology a user
can get better and fast solution.
• The remote diagnostics also a great feature of 5G technology.
• The 5G technology is providing up to 25 Mbps connectivity
speed.
• The 5G technology also support virtual private network.
• The new 5G technology will take all delivery service out of
business prospect
• The uploading and downloading speed of 5G technology
touching the peak.
• The 5G technology network offering enhanced and available
connectivity just about the world

Dept. of E&C Engg. 20 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
A new revolution of 5G technology is about to begin because 5G
technology going to give tough completion to normal computer and laptops
whose marketplace value will be effected.
There are lots of improvements from 1G, 2G, 3G, and 4G to 5G in the
world of telecommunications. The new coming 5G technology is available in
the market in affordable rates, high peak future and much reliability than its
preceding technologies.

Features that are getting embedded in such a small piece of electronics

are huge. Today you will hardly witness a cell phone without an mp3 player
with huge storage memory and a camera. You can use the cell phone as a
Walkman. Even every latest set being launched by the cell phone companies
have a mega pixel camera in it, which produces extraordinary digital image just
like a specialized camera for photography. Here are some an examples about
mobile technology in our future, A man’s phone detects that it hasn’t moved
for more than 2 hours during the man’s regular waking hours. It issues an
audible alarm, but no response! So it emits a signal that triggers a RFID chip
implanted inside his body. The RFID chip responds by verifying the identity of
the man and also a brief burst of telemetry that indicates that he is experiencing
heart beat irregularities and his blood pressure is dangerously low. The phone
quickly sends an automated text message to a medical alarm system, including
not only the identity and the health data of the owner but also the fact that the
man is not in his own apartment but in a reading room of a library.

This is what I think of a “Fifth Generation” world, also sometimes

referred as the 5G world. The next logical step is to bring highspeed broadband
to police cars and other emergency vehicles," stated Brian Corty, Chief
Technology Officer for 5G Wireless Communications. "We believe our
solution is capable of bringing highspeed connectivity to these vehicles at a
relatively low cost." "We're really taking 802.11b technology to new heights
and new applications," stated Jerry Dix, President and CEO of 5G Wireless.

Dept. of E&C Engg. 21 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
"We're in the field testing, mapping and demonstrating speeds upward of 1
Mbps, while traveling at 35 MPH and we are in the process of proving that the
vehicle units would remain connected as they move between multiple 5G
Access Points for seamless roaming capabilities."

The Mobile Wi-Fi capability is an extension of 5G's recently announced

WiFi Hot Zone. Whereas local hot spot "only reach an area of 300 ft. from an
access point, 5G's enhanced package provides coverage over a mile away.
Augmented by strategically placed "repeaters," it is possible to provide the
entire fleet of police cars and emergency vehicles total coverage within the 7-
square-mile city limits. The 5G technology has been able to penetrate both
manmade and natural obstacles while delivering speeds consistent with
line-of-sight locations. This enables the company to provide innovative
wireless solutions in response to increased national security and emergency
management concerns.

Having a wireless infrastructure is critical to our Public Safety

operations, We now have a reliable means of providing critical information as
well as normal municipal functions in the event of an emergency. And it's
gratifying to know we're doing it at an affordable level at a time when we are
under intense pressure to reduce costs due to the State's budget crisis."
5G Wireless Communications, Inc located in Marina del Rey, designs,
builds, operates, markets and services wireless broadband systems. Utilizing
proprietary IEEE 802.11b enhancements for "Last Mile" point-to-point and
point-to-multi-point networks, 5G customers receive dependable, high-speed
Internet access without the usual installation delays and at significantly lower
costs than most major competitors.

Certain statements in this news release may contain forward-looking

information within the meaning of Rule 175 under the Securities Act of 1933

Dept. of E&C Engg. 22 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology
and Rule 3b-6 under the Securities Exchange Act of 1934, and are subject to
the safe harbor created by those rules.
All statements, other than statements of fact, included in this release,
including, without limitation, statements regarding potential future plans and
objectives of the company, are forward-looking statements that involve risks
and uncertainties. There can be no assurance that such statements will prove to
be accurate and actual results and future events could differ materially from
those anticipated in such statements.

Dept. of E&C Engg. 23 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

CONCLUSION

There are some other projects, which are undertaken ay 5G technologies.

Here we want to mention that 3G mobiles are working these days, and 4G
technologies are coming, but in future we are ready to face 5G technologies
and some of its features we have presented in this paper.

Dept. of E&C Engg. 24 A.W.H.Engineering College

Seminar Report 2010-2011 5G Mobile Technology

REFERENCES

[1] W. W. Lu, “Defining China's Fourth Generation Mobile

communications”, ITU Telecom World 2006, Hong Kong, Dec. 2006.
[2] K. Aretz, M. Haardt, W. Konhäuser, and W. Mohr, “The future of
wireless communications beyond the third generation”,
International Journal of Computer and Telecommunications
Networking (Computer Networks), Vol. 37, 2001, pp. 83-92.
[3] T. Otsu, “The Challenge of Systems beyond IMT-2000—approach
from wireless”, International Telecommunications Union Journal,
Vol. 33, No. 3, 2003, pp. 26-30.
[4] J. Govil, and J. Govil, On the Investigation of Transactional and
Interoperability Issues between IPv4 and IPv6, IEEE EIT May 2007.
[5] Development of 3G mobile services, OECD Report, Sept. 2004.
[6] T. B. Zahariadis, “Migration towards 4G wireless
communications,” IEEE Wireless Communications, Vol. 11, No. 3,
2004, pp. 6-7.
[7] J. Wang, X. Shan, X and Y. Ren, “A New Approach for Evaluating
Clipping Distortion in DS-CDMA Systems”. IEICE Transactions on
Communications. Vol. E88-B, No. 2, 2005 pp. 792-796

Dept. of E&C Engg. 25 A.W.H.Engineering College