Arkitek PDF
Arkitek PDF
Arkitek PDF
Including basic material, labour, P&E, wastage cost but excluding on-cost mark up
S/n Description Rate (RM) Unit
1) 115mm thick brickwall in cement & sand brick 25.21 M2
7) 200x 200mm homogeneous tiles to floor including 20mm thick base screed 52.36 M2
8) 600x600mm porcelain tiles to floor including 20mm thick base screed 72.93 M2
9) 4mm thick skim coat to sides and soffit of beam/ slab 5.6 M2
10) 9mm thick 600x1200 gypsum plasterboard fixed on & including suspended ceiling tee 17.5 M2
11) 9mm thick plasterboard fixed on and including galvanized steel suspension ceiling 23.7 M2
12) 15mm thick ascoustic mineral fibre board fixed on & including galvanized steel suspension ceiling 38.32 M2
13) Interlocking Roof Tiles size 430x340x30mm including timber battens 50x25mm 14.7 M2
18mm thick polished marble including waterproofing impregnator and bedded on screed (measured
14) 265-305 M2
separately) with adhesive
16 Wall Finishes
a) Supply and apply 3 mm - 5 mm thick skim coat RM4.00 M2
b) Supply and apply 12mm thick AAC render (Sponge finish) to all external block wall/ Rc RM16.50 M2
17 Ceiling Finishes
a) Supply and apply 3mm thick skim coat (Smooth finish) to soffit of concrete RM6.00 M2