Printer Friendly View Page 1 of 3
2012 Audi A8 4.2L Eng L
SPORADIC VEHICLE NO START (DTC P170100, P157000)
TECHNICAL SERVICE BULLETIN
Reference Number(s): GROUP 01, NO. 15-13 (2030580/13), Date of Issue: March 6, 2015
AUDI: A6, A7, A8 2011 - 2015
GROUP: 01 - On-Board Diagnostic
Superceded Bulletin(s): GROUP 01, NO. 15-08, Date of Issue: February 17, 2015
01 15 13 2030580/13 March 6, 2015. Supersedes Technical Service Bulletin Group 01 number
15-08 dated February 17, 2015.
APPLICABLE MODELS AND YEARS
Model(s) Year VIN Range Vehicle-Specific Equipment
A6, A7, A8 2011 - 2015 All Not Applicable
CONDITION
• The customer complains that the vehicle sporadically cannot be started.
• The yellow gearbox warning light may be illuminated.
• One or both of the following DTCs may be present:
• DTC P157000 (Control Module Locked, sporadic) - in the engine control module, J623
(address word 01)
• DTC P170100 (Transmission control module locked, sporadic) - in the transmission
control module, J217 (address word 02)
TECHNICAL BACKGROUND
The remote key being used is transmitting incomplete immobilizer information to the vehicle,
resulting in the condition.
PRODUCTION SOLUTION
Improved software for the comfort system central control module, J393 (address word 46).
SERVICE
• For A6/A7 vehicles before VIN DN021776, or for A8 vehicles before VIN DN005692, replace
the affected remote key and perform the SVM code below.
• For A6/A7 vehicles after VIN DN021776, or for A8 vehicles after VIN DN005692, only
perform the SVM code below.
http://www2.prodemand.com/Print/Index?content=article&module=false&tab=... 12/11/2015
Printer Friendly View Page 2 of 3
SVM Update Instructions
1. Follow all instructions in the TSB, 2011732 : Software Version Management (SVM),
operating instructions .
2. Update the comfort control system module, J393 (address word 46), using the SVM
action code as listed in the table below if necessary.
SOFTWARE VERSION MANAGEMENT
SVM
Old Software Old Software New Software New Software
Model Code
Part Number Version Part Number Version (or higher)
Input
A6, A7,
Varies < 433 Varies 560 46A013
A8
WARRANTY
WARRANTY INFORMATION
Use applicable claim type. If vehicle is outside any warranty, this Technical
Claim Type:
Service Bulletin is informational only.
Service
5708
Number:
Damage Code: 0040
Replace affected key (if necessary) 5708 5550 10 TU
Labor
Operations: Update comfort control system module using SVM
5789 2599 30 TU
code
GFF (if key was replaced) 0150 0000 80 TU
GFF (if no key was replaced) 0150 0000 30 TU
Diagnostic Road test prior to service procedure No allowance 0 TU
Time:
Road test after service procedure No allowance 0 TU
Technical diagnosis at dealer's discretion (Refer to Section 2.2.1.2 and Audi
Warranty Online for DADP allowance details)
Claim
As per TSB #2030580/13
Comment:
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies
and Procedures Manual . Claims are subject to review or audit by Audi Warranty.
REQUIRED PARTS AND TOOLS
PARTS INFORMATION
http://www2.prodemand.com/Print/Index?content=article&module=false&tab=... 12/11/2015
Printer Friendly View Page 3 of 3
Part Number Part Description Quantity
See ETKA for the latest key part number Key 1 (if necessary)
ADDITIONAL INFORMATION
The following Technical Service Bulletin will be necessary to complete this procedure:
• TSB 2011732 : Software Version Management (SVM), operating instructions .
All parts and service references provided in this TSB (2030580) are subject to change
and/or removal. Always check with your Parts Department and service manuals for the latest
information.
http://www2.prodemand.com/Print/Index?content=article&module=false&tab=... 12/11/2015
