Mechanical Engineering Syllabus
Mechanical Engineering Syllabus
Mechanical Engineering Syllabus
MECHANICAL ENGINEERING
SYLLABUS
The syllabus applies to students admitted in the academic year 2017-2018 under the four-year curriculum.
Each course offered by the Department of Mechanical Engineering shall be classified as either introductory
level course or advanced level course.
A Discipline Core course is a compulsory course which a candidate must pass in the manner provided for
in the Regulations.
A Discipline Elective course refers to any technical course offered by the Department of Mechanical
Engineering for the fulfillment of the curriculum requirements of the degree of BEng in Mechanical
Engineering that are not classified as discipline core course.
Curriculum
Elective Courses
Students are required to complete 12 credits of elective courses offered by either the Department of
Mechanical Engineering, or other departments within or outside the Faculty of Engineering.
University Requirements
Students are required to complete:
a) Two English language courses, “CAES1000 Core University English” and “CAES9544 Technical
English for mechanical engineering”, for a total of 12 credits;
b) One Chinese language enhancement course “CENG9001 Practical Chinese for engineering
students”, for a total of 6 credits; and
c) 36 credits of courses in the Common Core Curriculum, comprising at least one and not more than
two courses from each Area of Inquiry with not more than 24 credits of courses being selected
within one academic year, except where candidates are required to make up for failed credits.
Capstone Experience
Students are required to complete the 12-credit MECH4429 “Integrated capstone experience” to fulfill the
capstone experience requirement for the degree of BEng in Mechanical Engineering.
Engineering Training
Students are required to complete the 6-credit MECH2418 “Engineering Training” which normally takes
place in the summer semester after their second year of study.
1
Subject to Approval
Degree Classification
The degree of Bachelor of Engineering shall be awarded in five divisions in accordance with EN16 of the
Regulations for the Degree of Bachelor of Engineering and UG9 of the Regulations for First Degree
Curricula.
The details of the distribution of the above course categories are as follows:
The curriculum of BEng in Mechanical Engineering comprises 240 credits of courses with the following
structure:
+Capstone Experience
*Training
* Industrial training course normally takes place in the summer semester after the third year of study
FIRST YEAR
ENGG120X Any two of the General Engineering Courses offered by Departments of the Faculty of
Engineering
SECOND YEAR
4
Subject to Approval
Training (6 credits)
MECH2418 Engineering training (Summer semester)
THIRD YEAR
FOURTH YEAR
Candidates from other departments in the Faculty of Engineering or from other faculties who have keen
interest in Mechanical Engineering with good background in mathematics may pursue Minor in
Mechanical Engineering.
Students must complete 18 credits of Introductory core courses to be chosen from the following list:
5
Subject to Approval
Students must complete 30 credits of discipline elective courses to be chosen from the following list:
COURSE DESCRIPTIONS
For course descriptions, please refer to the syllabuses of the Mechanical Engineering programme.
COURSE DESCRIPTIONS
Candidates will be required to do the coursework in the respective courses selected. Not all courses are
offered every semester.
Please refer to the General Engineering Courses in the syllabus for the degree of BEng for details.
6
Subject to Approval
Please refer to the University Language Enhancement Courses in the syllabus for the degree of BEng
for details.
Co-requisite: MECH4429
Successful completion of 36 credits of courses in the University Common Core Curriculum, comprising
at least one and not more than two courses from each Area of Inquiry with not more than 24 credits of
courses being selected within one academic year except where candidates are required to make up for
failed credits:
This course covers the basic knowledge of engineering drawing techniques and the basic concepts in
product design. It introduces standard engineering drawing methods, including orthographic and pictorial
projections, dimensioning and tolerancing, limits and fits. Features, functionality and representation
method for screws, fasteners, cam and gear will also be covered. This course also covers computer aided
drafting with 3D CAD modeling for facilitating the production of illustrations and animations in written
reports and oral presentation. To help students understand the importance of design for manufacture, the
working principles of basic manufacturing processes are covered in this course. This course has the
objectives: (1) provide students with an ability to communicate engineering information using standard
engineering drawing methods and computer-aided design tools; (2) introduce basic manufacturing
processes with emphasis on design for manufacturability; and (3) help students understand how typical
products are designed and manufactured so that they can be better prepared to undertake the practical
engineering training course.
7
Subject to Approval
Topics include: engineering drawing techniques; orthographic and pictorial projections; dimensioning and
tolerancing; limits and fits; screw fasteners; cam; gears; computer aided drafting with 3D CAD modeling;
product design; manufacturing processes.
Basic circuit principles; steady-state A.C. circuit theory; magnetic circuits; transformers; direct-current
motors; three-phase power system; induction motors; step motors.
This course aims to: (1) provide students with fundamental concepts for analysing D.C. and A.C. circuits;
(2) furnish students with knowledge of the operation of transformers and D.C. motors; (3) provide students
with an understanding of three-phase power system; and (4) provide students with knowledge of the
principles of operation and application of A.C. motors and step motors.
Topics include: basic circuit principles; steady-state A.C. circuit theory; magnetic circuits; transformers;
direct-current motors; three-phase power system; induction motors; step motors.
This course aims to (1) present a comprehensive study of the fundamental concepts and methods used in
the analysis of stress and strain in structural and machine components, and to develop logical methods for
the design of engineering components, structures and machines; (2) develop a thorough understanding of
the static deformation of simple non-rigid bodies, and of the stress and strain produced in such bodies due
to various loading conditions; (3) introduce the basic principles of kinematics and kinetics for particles and
rigid bodies, and (4) consolidate the knowledge of dynamics (e.g. by studying space applications).
Topics include: stress and strain; bending of beams; deflection of beams; thin-walled pressure vessels;
kinematics of particles and rigid bodies; kinetics and principle of momentum and energy; application of
dynamics principles (e.g. space applications); particles and vehicles with mass variation; velocity-
dependent resistance and the action of central forces.
Thermofluids is a branch of science and engineering, covering topics in thermodynamics and fluid
mechanics. These topics form the basic foundations that govern processes in engineering applications. This
course is an introduction to the thermofluids and how the principles can be applied to understand/design
thermal and fluid flow processes. The specific course objectives are: (1) understand and apply
thermodynamic principles to engineering applications; (2) understand basic concepts and fundamental
equations in fluid mechanics, and develop skills to solve practical flow problems; and (3) form a foundation
for subsequent studies in engineering thermodynamics, building services, material science, heat transfer,
marine engineering, environmental engineering, power engineering, energy conversion, energy system and
other areas. At the end of this course, students who fulfill the requirements of this course will be able to:
(1) identify, formulate and solve thermofluids engineering problems; and (2) design and conduct
experiments in thermofluids engineering, as well as to analyse and interpret data.
8
Subject to Approval
Topics include: concepts and definitions; properties of pure substance; heat and work; first law of
thermodynamics; second law of thermodynamics; entropy; basic concepts on fluids and flows; dimensional
analysis; similarity and modelling; momentum theorems and pipe flow analysis.
This course aims to provide students with hands-on training and practical experience in engineering basics,
design and manufacturing practices.
Topics include: automation & instrumentation; benchwork & machining practice; CAD/CAM &
prototyping; electrical & electronic engineering practice; and seminars on occupational health, safety,
professionalism and other contemporary issues.
In this course, students will be introduced to the underlying scientific principles of the mechanical engineering
behaviour of metals, and in particular to emphasise the effects of stress and heat via their influence on the
microstructure of the materials. The behaviour of materials in service conditions including stress and corrosion
effects will be highlighted. The course concerns those principles governing the crystalline state, which is
appropriate to metals and ceramics, as well as the amorphous and semi-crystalline states, which are relevant to
polymers.
Topics include: elements of atomic structure and bonding; crystal structure; structure of polymers;
solidification and phase diagrams; defects and plastic deformation in the crystalline state; TTT diagrams and
heat treatment of steels; metallurgy of fatigue; corrosion resistance and surface treatment; mechanical
properties of plastics.
Engineering Thermodynamics is a branch of science and engineering, covering topics in power cycles, air-
conditioning, heat transfer, and combustion. The course objectives are to: (1) provide students with
fundamental principles of the latest technologies of thermodynamics from a mechanical engineering
perspective, and (2) enable students to apply and practice the knowledge in relevant industry and
profession, such as power generation, automotive, and building services, etc. At the end of this course,
students who fulfill the course requirements will be able to: (1) apply knowledge of mathematics, science,
and engineering appropriate to thermodynamics, (2) identify, formulate, and solve engineering
thermodynamics problems, and (3) design and conduct experiments in engineering thermodynamics, as
well as to analyse and interpret data.
Topics include: IC engines; steam and gas power plants; refrigeration; jet propulsion; gas mixture;
psychrometry and air-conditioning; introduction to heat transfer and combustion.
9
Subject to Approval
This course aims to: (1) provide students with knowledge of solid-state electronic devices, linear circuits,
digital circuits and techniques of analog / digital conversion; and (2) furnish students with knowledge of
solid-state controllers for D.C. and A.C. motors.
Topics include: bipolar junction transistors; field-effect transistors; combinational logic circuits; sequential
logic circuits; analog electronics; digital-to-analog and analog-to-digital converters; solid-state controller
for D.C. motors; solid-state controller for A.C. motors.
This course intends to convey mathematical techniques commonly used in disciplines relevant to
mechanical engineering, e.g. heat conduction, vibration, probability, statistics, and numerical analysis. The
course objectives are: (1) introduce the concepts and applications of complex variables; (2) illustrate the
ideas of Fourier series and Fourier transforms; (3) obtain analytical solutions of the classical, second order
partial differential equations by separation of variables, with applications of engineering interests, e.g. heat
conduction and wave propagation; (4) present elementary theory of probability and statistics; and (5)
discuss simple techniques in numerical analysis, e.g. solving nonlinear algebraic equations, numerical
integration (quadrature), and initial value problems.
Topics include: complex variables; Fourier series and Fourier transforms; partial differential equations;
introduction to probability and statistics; elementary numerical analysis.
This course aims to: (1) provide students with an understanding of the fundamentals of the following areas
of fluid mechanics: kinematics, Navier-Stokes equations, differential analysis of flows in channels and
pipes, boundary layer flows, potential flows, dimensional analysis, and (2) equip students with capability
of applying basic fluid mechanics principles in engineering designs.
Topics include: Navier-Stokes equations; pipe and channel viscous flows; lubrication; two-dimensional
potential flows; boundary layer flows; dimensional analysis.
The aims of this course are: (1) to introduce the theory of elasticity for stress/strain analysis and high-light
the limitations of the elementary strength of materials approach; and (2) to introduce alternate approaches
for stress/strain analysis based on the numerical techniques.
Topics include: two-dimensional theory of elasticity; thermal stress and rotating disks; material failure and
yielding; introduction to the finite element method; buckling; energy methods; bending of circular plate.
10
Subject to Approval
Aviation is a rapidly expanding sector in developing economies like those in Asia. Aeronautical
engineering is the foundation of aviation as a mode of transport. Together with space flight, aeronautics
has been a driving force behind many of the modern technological development in the past century or so.
This course aims to provide students with a solid foundation in the most important aspects of aircraft design
and operation. The underlying science is common with many technological branches in general mechanical
engineering, but it also has distinctive features that make aeronautics more challenging and interesting. For
example, flow around aircraft is compressible with possible presence of shock waves while ordinary flows
in engineering is low-speed and incompressible. The engine has similar thermodynamic cycles like that
found in a gas turbine power plant but its main output is not derived from the turbine. Materials used in
aircraft design must have the lowest possible weight for a given strength requirement. Specifically, the
course will cover the following topics: aerodynamics and propulsion, materials and structures; safety and
some aspects of operation and maintenance of aircrafts.
Topics include: history of aeronautical science; wing aerodynamics; propulsion; flight mechanics; systems
and airframe structures; fatigue-crack growth; crack monitoring; damage tolerance; metallic materials;
composites; fibre-reinforced laminates; high-temperature alloys for turbines; creep damage.
This course involves training in industry for a nominal period of at least six weeks during the summer
vacation of the third year of study.
This course aims to provide students with on-the-job training in local or non-local companies and, thus,
the experiences on (1) integrating theory learned in lectures with practical applications; (2) understanding
real-life organizational structure and business operation; (3) enhancing inter-personal skills with senior
colleagues and co-workers; and (4) enriching their personal resume in becoming engineering professional.
This course involves training in industry for a nominal period of at least six weeks normally during the
summer vacation of the third year of study.
This course aims to provide the students with a comprehensive knowledge in advanced areas of rigid-body
dynamics, theory of vibration for different types of mechanical system, dynamic system analysis
techniques, basic closed-loop control system design techniques, with application to mechanical and other
control systems.
Topics include: advanced rotational motion; balancing of rotating and reciprocating masses; forced
vibration of single degree of freedom systems; vibration measurement, isolation and control; torsional
vibration of multi-rotor systems; free transverse vibration of shafts; modelling of physical systems; time
response analysis of dynamical systems; feedback control systems; control system design and applications;
stability; root locus method.
11
Subject to Approval
This course aims to: (1) provide students with a basic understanding of the principles and techniques related
to the formation, dispersion and control of various air pollutants formed from anthropogenic pollution
sources; and (2) enable students to assess common air pollution source emissions and suggest remedial
solutions to polluting sources.
The main focus of this course is on design and manufacture of engineering components and sub-systems.
This course aims to: (1) provide a background for students to understand the basic procedures for designing
mechanical components and sub-systems; and (2) enable students to understand the principles for material
selection and design for manufacturing and assembly.
Topics include: material selection; joining and fastening; jigs and fixtures design; power transmission
system design; CNC machining; rapid prototyping.
This course involves undertaking a dissertation or report on a topic consisting of design, experimental or
analytical investigation by individual students. The course objectives are to: (1) simulate a realistic
working experience for students; (2) provide them an experience of applying engineering principles,
engineering economics, business or management skills; and (3) train students to work independently to
obtain an effective and acceptable solution to industry-related or research-type problems.
Air conditioning and refrigeration is closely related to the thermal comfort and living standard in the built
environment. This course describes the basic principles of air conditioning and refrigeration engineering,
and discusses the design factors and practices.
The objectives of this course are to: (1) introduce students to the basic requirement for thermal comfort
and good indoor air quality in the built environment; (2) enable students to understand the fundamental
principles of air conditioning and refrigeration engineering; (3) study the characteristics and engineering
design of heating, ventilation, air conditioning and refrigeration (HVAC&R) systems; and (4) enable
students to achieve effective and efficient design solution.
Topics include: air conditioning systems; psychrometry; thermal comfort; load and energy calculations;
air-side systems; fan design and other major components; air duct design; space air diffusion; water-side
systems; piping system design; pump design and operation; indoor air quality; mechanical and natural
12
Subject to Approval
ventilation; ventilation efficiency; refrigerants and refrigeration systems; refrigeration cycles and
principles; design of refrigeration systems; refrigeration systems components and performance.
Fire service installation are essential in building constructions to protect people from the damages of fire
outbreak. This course will introduce the basic concepts of fire safety, legislative requirements and the
design of most commonly installed fire service installation.
This course aims to: (1) introduce students to the principles of building fire safety design and fire protection
engineering for modem buildings; and (2) enable students to design fire services systems for modern
buildings complying with local statutory regulations under typical real-life constraints.
Topics include; fire behavior and characteristics; compartment fires; fire hazards; automatic fire detection
and alarm systems; automatic fixed water-based and gas-based fire extinguishing systems; special fire
extinguishing systems; portable fire extinguishers; smoke production; smoke management and control
systems; staircase pressurization systems; LPC rules; HKFSD and NFPA codes; prescriptive and
performance-based approaches; fire risk management.
Utility services for building constructions provide the basic functionality for occupants. These include
water supply and drainage services, vertical transportation, communication, security and alarm systems.
This course will develop students in the basic concepts and design principles and calculations of the service
installation.
This course aims to: (1) introduce and identify the engineering concepts, design procedures, practical
applications and related regulations of the main utility services, and (2) develop a basic understanding of
the objectives, methods and standards for effective design and operation of the utility services.
Topics include: characteristics and design of different utility service installations; cold, hot and flushing
water supply systems; steam supply; sanitary and storm water drainage systems; vertical transportation
system; communication system; security and alarm.
This course aims to provide the students with a comprehensive knowledge of continuous-time and discrete-
time linear control systems, with particular reference to the modelling, analysis and design of mechanical
and related control systems using both conventional and modern approaches.
Topics include: control of mechanical and electrical systems; frequency domain analysis; Nyquist stability
criterion; linear control system design; computer control systems; state-space analysis of multivariable
linear system; controllability and observability; stability analysis; state feedback.
13
Subject to Approval
This course aims to: (1) provide students with a basic understanding of the working principles and
applications of computer-aided design and manufacture (CAD/CAM) technologies; and (2) enable students
practice CAD/CAM tools and techniques.
Topics include: basic data structuring techniques; transformation techniques; mathematical bases for
surface modeling; principles of solid modeling and applications; numerical control; computer-aided
production technologies; computer-integrated manufacturing.
This course aims to: (1) provide students with basic knowledge on energetics and development of
conventional and non-conventional energy sources; and (2) develop in-depth understanding of the
operation of modern power plants and an overview of energy conversion technologies.
Topics include: energy calculations; solar thermal power plant; energy storage solar photovoltaic systems;
wind energy systems; nuclear energy and power plants; nuclear waste management; urban waste.
The objectives of this course are to: (1) master the fundamental concepts of engineering management
necessary to bridge the gap between management and technology; (2) provide students with an opportunity
to enhance their understanding with hands-on-skill to problem solving for decision making in different
technical operations; and (3) introduce managerial models that implement qualitative as well as quantitative
analyses to assist students to improve their ability and skills to analyze decision making problems.
Topics include: introduction to engineering management; professional ethics and corruption prevention;
functions of technology management including planning and forecasting, decision making and analysis,
organizing, leading and motivation, and controlling; managing technology including research and
development, engineering design, production activity and operations, marketing and service activities;
project management; engineering economics including present worth analysis; annual equivalent worth
analysis; rate of return analysis; project cash flow analysis; quantitative analysis for management including
inventory control, linear programming; queuing theory.
This course is on the fundamental principles of heat transfer, covering heat conduction, heat convection
and heat exchangers. The course objectives are: (1) to provide an understanding of fundamental principles
of heat transfer; and (2) to enable students to use the fundamental principles for conducting thermal analysis
and design of engineering problems. At the end of this course, students who fulfill the requirements of this
course will be able to: (1) demonstrate an understanding of the principles that govern heat transfer
processes; (2) analyze heat-transfer problems quantitatively; and (3) identify relevant engineering solutions
in thermal systems.
14
Subject to Approval
Topics include: Fourier’s law; heat-conduction equation; thermal conductivity; conduction; fins; basic
convection principles; laminar and turbulent heat transfer in tubes and over plates; Reynolds analogy; types
of heat exchangers; overall heat-transfer coefficient; log mean temperature difference; effectiveness-NTU
method; heat exchanger design.
This course aims to: (1) provide the general principles and techniques related to electromechanical product
design and development; and (2) enable students to practice both conventional and computer-aided product
design and development methods.
Topics include: product design and manufacturing process; methods and tools used for designing and
developing electromechanical products; tooling design; design for manufacture and assembly; product
costing; value engineering.
Challenging engineering environments demand special material properties if design requirements are to be
met. This course is to introduce the very wide range of engineering materials which have been tailored to
meet some of these requirements. Examples range from high temperature materials, materials for high
specific strengths, resistance to static and dynamic loadings, plus some materials selection criteria.
Topics include: materials for high strength/weight ratio; high temperature service; resistance to corrosion
resistance and protection; advanced alloys; composite and ceramic materials; problem-based learning
module.
The aims of this course are to: (1) formulate three-dimensional theory of elasticity and introduce the theory
of plasticity; (2) introduce analytical and numerical methods for solving practical engineering problems;
and (3) introduce theories of fracture and fatigue and their applications to practical engineering problems.
Topics include: theory of elasticity; plastic analysis; finite element methods for two- and three-dimensional
continua; rectangular plate bending; fracture mechanics.
This course aims to: (1) elucidate the advanced dynamics of liquids and gases, including steady and
unsteady solutions of the Navier-Stokes equations, (2) perform a study on the properties, mass flux and
momentum flux of a boundary layer, (3) explain the basic mechanics of a compressible fluid flow and
applications to aerodynamics, (4) discuss the ideas of surface tension and stability in simple multiphase
flows; To derive the Plateau-Rayleigh instability as the basic governing model for the linear stability of
droplet formation, and (5) understand the complex flow patterns behind bluff bodies, mechanisms
15
Subject to Approval
associated with vortex shedding and drag force; To characterize the low Reynolds number flow around a
sphere and to measure viscosity using the Stokes’ drag formula, and (6) introduce elementary concepts of
turbulence.
Topics include: continuity and Navier-Stokes equations; Laminar boundary layers; Surface tension;
Elementary concepts of compressible flows and shock waves; stability theory; flow behind bluff bodies;
low Reynolds number flows and turbulent flows.
This course aims to achieve two purposes. In the first, it is a further study of basic physical science of
waves, fluid and structural dynamics. The second aim is the application of the knowledge to solving
practical problems of vibration analysis and noise control; noise pollution being one of the four major
environmental pollutions, namely water, air, noise and solid waste. Specifically, the following three aspects
are covered in the course: (i) fundamentals of vibration and its analysis, (ii) hearing mechanisms,
environmental noise sources and their mitigation, (iii) mechanisms of sound generation, propagation and
control.
Topics include: fundamentals of single- and multiple degree of freedom systems; vibration modes and
finite element analyses; sound radiation by vibration and flow; human hearing; sound and vibration
measurements; wave propagation and duct acoustics; sound absorption and reflection; vibration isolation
and noise abatement methods.
This is a compulsory, capstone experience course in the final year of the BEng in Mechanical Engineering
degree programme. Students are required to undertake a group design project that runs from September to
April of the following year. The project topics are stipulated either by teachers or by industrial sponsors.
Each project group has two teachers acting as supervisors and an additional teacher serving as moderator.
During the course of the project, supervisors communicate with the students and the concerned project
sponsor to monitor the project progress. At the completion of the project, each project student presents
his/her achievements to the supervisors, moderator and sponsor via a written report and an oral
presentation. This course aims to: (1) provide a problem-based learning experience for students to learn
how to apply scientific knowledge and team-work approach to tackle design/engineering problems
systematically, and (2) strengthen students’ inter-personal and communication skills through interaction
with teammates, supervisors and sponsors.
Typical project activities include: problem identification & definition; research into information pertaining
to the problem, design & analysis; materials sourcing; communication; conducting experiments/making
prototypes for verification and demonstration of results; writing reports and giving oral presentations.
16
Subject to Approval
For course descriptions, please refer to the syllabus of the Medical Engineering programme.
For course descriptions, please refer to the syllabus of the Civil Engineering programme.
17