Scribd Logo
Upload

Welcome to Scribd!

  • 128 views

    LT-6150 MGC Network Firmware Update Wizard

    Uploaded by

    Jesus Hinostroza
    The MGC Network Firmware Update Wizard allows you to upgrade or downgrade the firmware on a single CPU component in a FleX-Net or MMX system. It supports upgrading master CPUs, audio controllers, remote annunciators, and loop controllers to match the firmware version of the rest of the system. The process requires a Windows computer, firmware file, registered CodeMeter key, and the correct cabling to connect to the CPU. All information on the CPU is erased during the upgrade.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LT-6150 MGC Network Firmware Update Wizard

    Uploaded by

    Jesus Hinostroza
    128 views2 pages
    The MGC Network Firmware Update Wizard allows you to upgrade or downgrade the firmware on a single CPU component in a FleX-Net or MMX system. It supports upgrading master CPUs, audio controllers, remote annunciators, and loop controllers to match the firmware version of the rest of the system. The process requires a Windows computer, firmware file, registered CodeMeter key, and the correct cabling to connect to the CPU. All information on the CPU is erased during the upgrade.

    Original Description:

    LT-6150

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MGC Network Firmware Update Wizard allows you to upgrade or downgrade the firmware on a single CPU component in a FleX-Net or MMX system. It supports upgrading master CPUs, audio controllers, remote annunciators, and loop controllers to match the firmware version of the rest of the system. The process requires a Windows computer, firmware file, registered CodeMeter key, and the correct cabling to connect to the CPU. All information on the CPU is erased during the upgrade.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    128 views2 pages

    LT-6150 MGC Network Firmware Update Wizard

    Uploaded by

    Jesus Hinostroza
    The MGC Network Firmware Update Wizard allows you to upgrade or downgrade the firmware on a single CPU component in a FleX-Net or MMX system. It supports upgrading master CPUs, audio controllers, remote annunciators, and loop controllers to match the firmware version of the rest of the system. The process requires a Windows computer, firmware file, registered CodeMeter key, and the correct cabling to connect to the CPU. All information on the CPU is erased during the upgrade.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    MGC Network Firmware Update Wizard

    MGC Network Firmware Update Wizard


    The MGC Network Firmware Update Wizard lets you upgrade or downgrade the firmware on a
    single CPU in a FleX-NetTM or MMX system.

    All CPUs in a FleX-NetTM or MMX system must have the same firmware version. If you have a
    component that cannot communicate with the rest of the system because it does not have the
    same firmware version as the rest of the system, then you can use the MGC Network
    Firmware Update Wizard to install the right firmware version on it.

    If you want to upgrade the whole FleX-NetTM or MMX system, use the Upgrade Firmware
    option in the Configurator.
    The MGC Network Firmware Update Wizard lets you upgrade or downgrade the firmware on
    the following CPUs:
    • Master CPUs: FX-2000N or MMX-2000N series panels
    • Audio controllers, for instance ANC-5000
    • Remote annunciators, for instance RAXN-LCD
    • Loop controllers, for instance ALCN-792M Quad Loop Adder
    You need:
    • Windows computer with a serial or USB port
    • The MGC Network Firmware Update Wizard software
    • Serial cable for updating a remote annunciator or master CPU
    • UIMA2 cable and RS-485 adapter for updating a loop adder or audio controller
    • Registered CodeMeter key
    • A copy of the firmware that you want to load onto the CPU

    Update Firmware

    ! Attention: This process erases all the information on the affected CPU. Get the
    jobs from the panel and back up your configurations before continuing.

    1. Insert your FleX-NetTM or MMX CodeMeter key into the computer.


    2. Start the MGC Network Firmware Update Wizard.
    The MGC Network Firmware Update Wizard prompts you for your PIN.
    3. Type your four digit PIN.

    LT-6150 rev 1 1
    MGC Network Firmware Update Wizard

    i
    4.

    Note: To update the firmware, you must use the same ESD number as the organization
    that configured the panel, unless it is a new blank panel.

    5. Click the kind of CPU that you want to upgrade or downgrade.

    6. Click Browse and choose the firmware file. The firmware file has the extension .fx2.

    7. Click Next.
    8. Connect the computer to the CPU as shown in the picture that appears in the window.
    Use either the serial cable or the UIMA2 cable as shown.
    9. Select the communication port that your computer is using to connect to the CPU.

    10. Wait while the firmware is upgraded.

    When the upgrade is complete, click Close.

    2 LT-6150 rev 1

    You might also like