Slip-on, Wire-Wrap ® , TERMI-POINT ®

Special connection terminal blocks

General information well as for marshalling distributors.
This means that the required wiring
In measurement and regulation techniques can be optimally adapted
systems, the conductor cross to the circumstances of installation.
sections range mainly up to 1 .5 mm 2 . The marshalling plugs provide a
In addition to the "linear connection high packing density with different
arrangements " , i .e . the common connection methods . The simple
terminal strips with compact and mounting and convenient operation
narrow modular terminal blocks, for allow practical wiring and ensure
example with a screw connection, reliable contacting of the
"two-dimensional arrangements " conductors.
have become increasingly popular, We are always willing to advise
i .e . connection fields with you on individual developments to
appropriate front connection help solve any special problems.
techniques . These connection
systems are : Slip-on, solder, spring-
cage termination, wire-wrap and clip
connection.
Phoenix Contact offers a
manifold selection of various
terminal block models and special
constructions for the interface area
between electrics and electronics as

338 Phoenix Contact

 MIN

Slip-on connection Solder connection Coil connection Wire-Wrap ®

This connection method, which The solder connection has its This kind of connection requires
has been introduced worldwide and origin in communication engineering that solid strand conductors are
standardized in accordance with and is nowadays still used in coiled round a sharp-edged, angular
EN 61 210/VDE 0613-6, involves measurement and control plants . In or rectangular pin by means of a
crimping a slip-on connection sleeve the case of the manually soldered motor-driven pistol . The high
with a corresponding cross section on Phoenix Contact solder terminal pressure at the pin corners ensures
the stripped conductor end . Contact blocks or solder connectors, the gas-tight contact points.
is made by pushing the slip-on material, the shape and the The coil connection is standardized
connection sleeve onto the slip-on preliminary tin-plating of the soldering in accordance with IEC 352-1/
blade . In order to provide a good tags fulfill the prerequisites for a good DIN EN 352-1 . 4 to 8 coils with a
connection, attention must be paid to solder connection. conductor diameter of between
the size of the connection sleeve, the The hole in the soldering tag or 0.2 and 0 .8 mm (AWG 30-20) are
conductor cross section and the die of soldering basin not only facilitates necessary for a perfect connection.
the fabrication tool. work with the soldering iron and tin-
To support the conductor lead soldering, but also provides the
insulation, it is crimped together with essential mechanical strain relief of the
the conductor to ensure strain relief conductor or the soldering point .
between conductor and connection .

TERMI-POINT ® clip connection Spring-cage connection

In the case of clip connection in As in the case of the modular
accordance with DIN 41 611-4, single terminal blocks with spring-cage
or multi-core conductors up to connection, a friction-locked contact
0 .5 mm 2 (AWG 20) are stripped in between the conductor and the
one operation by means of a current carrying metal part is also
pneumatically-operated special tool guaranteed for the marshalling plugs
and are shot with a clip onto the with spring-cage connection.
rectangular pin so that they are gas- While solid conductors larger than
tight. 0 .75 mm 2 can be connected by simply
The clip and the connection pin pushing them in, thin or stranded
have to meet high standards with conductors are inserted after pushing
respect to mechanical stability, low down the orange opening lever. The
dimensional tolerances and exact conductors are always disconnected
surface treatment . by actuating the opening lever. Wire-Wrap' - registered trademark of
the Gardner-Denver company
TERMI-POINT' - trademark of AMP Incorporated

Phoenix Contact 339



Slip-on connection terminal

blocks, UKB and UVKB

UKB 4-FS/FS (4-2,8-0,8) UVKB 4-FS (6-2,8-0,8)

Terminal width 6.2 Terminal width 6.2
(IEC) rigid flexible I U (IEC) rigid flexible I U
[mmz] solid stranded AWG [A] [V] [mm2 ] solid stranded AWG [A] [V[
Connection data 20 800 Connection data 0.2-4 0 .2-4 24-12 32 500
Slip-on connection 6 .3/2 .8 x 0 .8 mm ') Slip-on connection 6 .3/2 .8 x 0 .8 mm

9 NV

Order No.
Description Color Type Order No. Pkg. Type Pict '

Terminal block, with universal foot for mounting on C, or

u, with slotted 6 .3/2.8 mm flat connectors UKB 4-FS/FS (4-2,8-0,8) 19 60 01 3 50 UVKB 4-FS (6-2 .8-0 .8) 19 54 01 6 50

Cover Gray D-UKB 4 19 60 10 7 50 D-UVKB 4 19 20 02 4 50

Fixed bridge, for cross connections in the

terminal center, screw heads with insulating FBI 10-6 I , .,, : 20 A 02 03 25 0 10 FBI 10-6 I mo, : 24 A 02 03 25 0 10
collar . 10-position, divisible, with 10 screws
Insertion bridg , fully insu ., 2-po . . EB 2-6 I mo, .: 24 A 02 01 15 5 100
r~ , p°, 1 n n, n 24 A 02 01 14 2 100
fully insulated, 3-pos. EB 3-6
d ib e, ns d s ne 10- o . EB 10-6 24 A 02 01 13 9 10 I
Isolator bridge bar, 10-position . divisible, with 10Wrd~t~rr ISSBI 10-6 : 20 A 03 01 50 5 10 ISSBI 10-6 Ime, ,: 24 A 03 01 50 5 10 i
screws, for switchable branches with
Bridge bar IS-K 4 as distance piece IS-K 4 13 02 33 8 100 IS-K 4 13 02 33 8 100

Separating plate, for electrical separation

[ _J
of neighboring bridges, later TS-K 13 02 21 5 100 TS-K 13 02 21 5 100
slide-in mounting, no loss of pitch
Partition plate, for visual and electrical
separation of terminal groups, 2 .3 mm thick

Test socket, for test connection with MPS test plug or

RPS reducing plug €T PSB 3/1014 06 01 29 2 100 PSB 3/10/4 06 01 29 2 100 '

Test socket, insulated, only used above FBI, ISSBI.

for test connections with lest plug MPS or RPS PSBJ 3/13/4 02 01 30 4 100 PSBJ 3/13/4 02 01 30 4 100

Screwdriver SZS 0,6 x 3,5 1205053 10

Zack marker strip, 10-section, white ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)
Dimensions
Width length / cover width [mm] 6 .2/48/1 .5 6 .2/68/2 .2
Height (NS 35,7 .5 / NS 35/151 NS 32) [mm] 44/51 .5/49 44/51 .5/49
Technical data in accordance with IEC / DIN VDE
Max. load current / cross section [A]/[mm'] 20/1 32/4
Max . cross section with insertion bridge (solid/stranded) [mm2] - 4/4
Rated surge voltage / contamination class [kV[ /- 8/3 6/3
Surge voltage category / insulating material group -/- III / I III / I
Connection capacity
Stranded with ferrule without / with plastic sleeve [mm , ] 0.25 - 4 / 0.25 - 2 .5
Multi-conductor connection (2 cond. with same cross section)
Solid / stranded [mm'] 0 .2 - 1 .5 / 0 .2 - 1 .5
Stranded with ferrules without plastic sleeve [mm-] 0 .25 - 1 .5
Stranded with TWIN ferrule with plastic sleeve [mm , ] 0 .5 - 2 .5
Stripping length [mm] 8
Internal cylindrical gauge (IEC 60 947-1) - A3
Thread M3
Torque [Nm] - 0 .6 - 0 .8
Insulation material PA PA
Inflammability class in acc . with UL 94 V2 V2
Approval data (UL/CUL and CSA)
Nominal voltage current r conductor sizes UL/CUL : [V] / [A] / AWG 300 / 25 / 28 -12
CSA : [V] / [A] / AWG

') Current and voltage data for slip-on connections in acc . with 2 ) Dependent on the slip-on connection sleeve.
EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.

340 Phoenix Contact



UVKB 4-FS/FS (8-2,8-0,8) UHK 4-FS/FS (12-2,8-0,8) UHK 4-FS (8-2,8-0,8)

Terminal width 6 .2 Terminal width 6 .2 Terminal width 6 .2
(EC) rigid flexible U (IEC) rigid flexible U (IEC) rigid flexible I U
f] solid stranded AWG [A] [V] [mm'] solid stranded AWG [A] [V] [mm l] solid stranded AWG [A] [V]
Connection data 32 800 Connection data 40 800 Screw connection 0 .2-4 0 .2-4 24-12 40 800
Sip-on connection 6-3/2 .8 x 0 .8 mm ) ') Slip-on connection 6.3/2 .8 x 0.8 mm ') Slip-on connection 6 .3/2 .8 x 0 .8 mm ') ')

NV 3B "a RV'LR/PRS SP EV'LR/PRS

Pcs. Pcs.
Order No . Type Order No.
TIPP Order No. Pkt . Type Pkt Pkt.

UVKB 4-FS/FS (8-2,8-0,8) 1953017 50 UHK 4-FS/FS (12-2,8-0,8) 20 17 22 4 50 UHK 4-FS (8-2,8-0,8) 20 17 23 7 50

041VKB 4 1920024 50 D-HK 4 20 02 02 2 50 D-HK 4 20 02 02 2 50

FBI 10-6 .24A 02 03 25 0 10

EB 2-6 I mo, ; 30 A 02 01 15 5 100

EB 3-6 30 A 02 01 14 2 100
EB 10-6 30A 0201139 10

N tBI 10-6 I,,24A 0301505 10

4 13 02 33 8 100

TS4( 13 02 21 5 100

D-UVK 4 19 22 02 2 50 D-UVK 4 1922022 50

PSB 311014 06 01 29 2 100

PSBJ 3113/4 02 01 30 4 100

SZS 0,6 x 3,5 1205053 10

IB 6 (for order data, see page 397) ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)

6 .2 / 68 / 2 .2 6.2/54/2 .3 6 .2/54/2 .3
44 / 51 .5 / 49 51 .5/59/56 .5 51 .5/59156.5

32/1 40/11 40/4

4/4
8/3 8/3 8/3
Ill/I III / I III / I

0 .25 - 4 / 0 .25 - 2 .5

0 .2 - 1 .5 / 0.2 - 1 .5
0 .25 - 1 .5
0 .5 - 2 .5
9
A3
M3
0 .6 - 0 .8
PA PA PA
V2 V2 V2

300/25/ 250/25/– 250/25/28-12

600/20/22-14 600/20/28-14

Phoenix Contact 341



VBST 4 slip-on connection

terminal blocks and
equipotential bonders for
module plugs

VBST 4-FS (6-2,8-0,8)

with contact pin fur module plug

Terminal width 6 .2
(IEC) rigid flexible I U (IEC) rigid flexible I U
[mm 2 ] solid stranded AWG [Al [V] [mm2] solid stranded AWG [A] [V]
Connection data 0 .2-4 0 .2-2 .5 24-12 32 800 Connection data 30 800
Slip-on connection 6 .3/2.8 x 0 .8 mm ') ') Slip-on connection 6 .3/2 .8 x 0 .8 mm 'I '1
Nominal current of the module connector per position : 13

NV

Pcs.
Description Color Type Order No . Type Order No.
Pkt .

Terminal block, for mounting on u . with slotted 6.3/2 .8 mm flat

plugs, for equipotential bonding over 2 terminal blocks (8 slots), VBST 4-FS (6-2,8-0.8) 08 52 01 2 50
terminal width : 17 mm
Equipotential plugs, for mounting on Lr, with slotted 6 .3/2 .8 mm
flat connectors.. 8 slots, PVB 2 0870023 10
terminal width : 17 mm
Equipotential bonder, for mounting on u. with slotted
6 .3/2 .8 mm flat plugs . 12 slots, terminal width : 23.2 mm PVB 3 0870036 10

Equipotential bonder, for mounting on soar, with slotted

6.3/2.8 mm flat plugs, 20 slots, terminal width : 35.6 mm PVB 5 0870052 10

Equipotential bonder, for mounting on lo-r . with slotted

6.3/2 .8 mm flat plugs . 40 slots, terminal width : 66 .6 mm PVB 10 0870120
t
End cover and partition plate
Gray D/TP-VBS 08 51 02 6 50

Insertion bridge, fully insul . . 2-pos. EB2-6 24A 0201155 100

fully insulated, 3-pos. EB 3-6 24 A 02 01 14 2 100
divisible . insulated spine 10-pos. EB 10-6 24 A 02 01 13 9 10
Screwdriver SZS 0,6 x 3,5 12 05 05 3 10

Zack marker strip, 10-section . white ZB 6 (for order data, see page 397) ZB 6 (for order data. see page 397)
Dimensions
Width it length cover width [mm] 6 .2/72/2 .2 see legend / 80 /-
Height (NS 35/7,51 NS 3515) [mm] 39 .5 / 47 43 .5 / 51
Technical data in accordance with IEC / DIN VDE
Max . load current / cross section [A)/[mm2] 32/4 30/1
Max- cross section with insertion bridge (solid/stranded) [mm 2] 2 .5 / 2 .5
Rated surge voltage / contamination class [kV] / - 8/3 8/3
Surge voltage category i insulating material group -/- III / I III/I
Connection capacity
Stranded with ferrule without l with plastic sleeve [mm%] 0 .25 - 4 / 0.25 - 2 .5
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded [mm 2 ] 0.2 - 1 .5 / 0 .2 1 .5
Stranded with ferrules without plastic sleeve [mm'] 0.25 - 1
Stranded with TWIN ferrule with plastic sleeve [mm u ] 0.5 - 1 .5
Stripping length [mm] 8
Internal cylindrical gauge (IEC 60 947-1) A3
Thread M3
Torque [Nm] 0.6 - 0 .8
Insulation material PA PA
Inflammability class in acc . with UL 94 V2 V2

The special feature of the VBST 4-FS designations and order numbers are e .g.: ') Current and voltage data for slip-on connections in acc. with
EN 61 210 are also dependent on nom . size, material, insulation
(6-2,8-0,8) is the gold-plated contact pin 10-position socket housing made of of the connection sleeve and conductor cross section.
for the central insertion of a 10-position glass-fiber reinforced polyamide, black
module plug . This gives the terminal No . 925313-1
block the additional function of a plug-in
coupler, making it possible to connect
Contact sockets, taped
No . 163083-7
1
single control subassemblies to the Contact sockets, individual pins
terminal strip in a flash . The module plug No . 163084-2 .
is supplied by AMP Deutschland,
www .amp .com . The AMP type
342 Phoenix Contact


Slip-on connection terminal

blocks, USK

USK 4-FSR (4-2,8-0,8) USK 4-FS/FS (8-2,8-0,8)

Terminal width 6 .2 Terminal width 6 .2

(IEC) rigid flexible I U U
[mm,] solid stranded AWG [A] [V] [A ] [ V]
Connection data 0 .2-4 0 .2-4 24-12 32 800 Connection data 32 800
Slip-on connection 6 .3/2 .8 x 0.8 mm .) Slip-on connection 6 .3/2 .8 x 0 .8 mm ') ')

c eus Sp PRS

Description Color Type Order No. Type Order No.

Pkt . P kt.

Terminal block, with universal

foot for mounting onv or u Gray USK 4-FSR (4-2,8-0 .8) 02 70 01 8 50 USK 4-FS/FS (8-2,8-0,8) 02 71 01 7 50

Dover Gray D-USK 4/10 02 60 02 8 50 D-USK 4/10 02 60 02 8 50

Insertion bridge, fully insul. . 2-pos EB 2-6 ,, 24 A 02 01 15 5 100

My insulated. 3-pos H EB 3-6 24 A 02 01 14 2 100
divisible, insulated spine 10-pos EB 10-6 24 A 02 01 13 9 10
Screwdriver
SZS 0,6 x 3,5 12 05 05 3 10

It! marker strip, 10-section ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)
White

Dimensions
Width( length / cover width [mm] 6 .2 / 42 .5 / 1 .3 6 .2 / 42 .5 / 1 .3
Haight (NS 35/7.5 / NS 35/15/ NS 32) [mm] 45 .5 / 53 / 50 .5 45 .5/53/50 .5
Technical data in accordance with IEC / DIN VDE
Wm load current / cross section ]A)/[mmH] 32/4 32 /')
Max. cross section with insertion bridge (solid/stranded) [mmH] 2 .5 / 2 .5 -
lilted surge voltage / contamination class [kV] / - 8/3 8/3
Sege voltage category / insulating material group -/- III / I III / I
Connection capacity
Stranded with ferrule without / with plastic sleeve [mm-] 0 .25 - 41 0 .25 - 2 .5
loth-conductor connection (2 cond . with same cross section)
Solid . stranded [mm l 0 .2 - 1 / 0 .2 - 1 .5
Stranded with ferrules without plastic sleeve [mmH] 0 .25 - 1 .5
Stranded with TWIN ferrule with plastic sleeve [mm-] 0 .5 - 2 .5
Slipping length [mm] 9
Internal cylindrical gauge (IEC 60 947-1) A3
Thread M3
Torque [Nm] 0 .6 - 0 .8
emulation material PA PA
Inflammability class in acc . with UL 94 V2 V2
Approval data (UUCUL and CSA)
Nominal voltage / current / conductor sizes UUCUL : [V] / [Al / AWG 600 / 20 / 28 - 12 600/20/-
CSA : [V] / [A] / AWG 600 / 20 / 28 - 12 600/20/-

Phoenix Contact 343



Double-level terminal block

with screw/slip-on connection

Operating current depending on ambient temperature

(conductor cross section 1 mm r or 2.5 mm3)

20

16

12 VKK 4-FS
Terminal width 7 .62
(IEC) rigid flexible
[mm] solid stranded AWG [Al
'4
Connection data 0.2-4 0 .2-4 24-12 30 400
STG-MTN 0,5-1,0 0 .5-1 20-18 10 3 )
STG-MTN 1 .5-2,5 1 .5-2 .5 16-14 20 3 )
This terminal block is designed for Slip-on connection 6 .3/2.8 x 0 .8 mm
0 20 40 60 80 100 120
multiple connections in a restricted space. Ambient temperature [`C]
NV
On the one hand, it has screw
connections for 4 mm 2 stranded Description Color No. of Type Order No.
conductors, and on the other hand, it pos.
Double-level terminal block, for
permits the connection of one 6 .3 mm mounting on u VKK 4-FS 08 91 01 5
slip-on sleeve or two 2 .8 mm slip-on
Group marker plate, for group marking with
sleeves . In addition, it is possible to connect 2 labels type ... 6, 1 .5 mm thick SAD-VKK 4 1002049
polarized STG . . .-VKK multi-position
Module plug housing,
module plugs on both levels and on both for fitting the module socket Black 1 STG 1-VKK 4 31 90 31 5 10
connection sides (instead of the 2 .8 mm contacts STG-MTN 2 STG 2-VKK 4 31 90 32 8 10
3 STG 3-VKK 4 31 90 33 1 10
connection sleeves). 4 STG 4-VKK 4 31 90 34 4 10 t
Due to the closed insulation housing, an 5 STG 5-VKK 4 31 90 35 7 1O
6 STG 6-VKK 4 31 90 36 0
end cover is no longer required as an 7 STG 7-VKK 4 31 90 37 3 1
accessory. The terminal block is 7 .62 mm STG 8-VKK 4 31 90 38 6 1

wide in accordance with the pitch Module socket contact, is inserted into plug
housing STG after the conductor has been
dimension of the multiposition module crimped,
plugs . There is a slight level offset within the for conductors from 0.5 to 1 .0 mm 2 STG-MTN 0,5-1,0 31 90 43 8 100'
for conductors from 1 .5 to 2 .5 mm % STG-MTN 1 .5-2,5 31 90 50 6 100
housing between the upper and the lower
levels to improve accessibility to the lower Contact removal tool, for removing the
module socket contacts STG-EW 31 90 44 1 1
level . The housing shows no level offset
externally. Also to improve handling, the Strain relief, for 8-pos. plug
housings STG, divisible for plug Black STGZ BK 31 93 13 4 10
offset on the screw side is greater than on housings with a lower no . of pos.
the slip-on connection side. Crimping pliers, for crimping conductors to the
The terminal blocks are supplied module socket contacts STG-MTN CRIMPFOX MT 2,5 12 04 03 8

interlocked, i .e . as quick-mounting blocks of Potential busbar, with slotted 6 .3/2.8 mm flat

~MMff.~ -,
10 which snap onto the NS 35/7,5 DIN rail. plugs . max . 40 A, S-FS(2 .8-0,8) 31 91 69 9
brass . tin-plated, length : 1 m
The outgoing conductors can be Screwdriver
arranged on the slip-on connection side in SZS 0,6 x 3,5 12 05 05 3 10
guide lugs . In addition, the housing has Zack marker strip,
angled slots in this area for mounting flat 10-section While ZB 7,62 (for order data, see page 398)
plug potential busbars.
Dimensions
The modules are labeled using the Width i length [mm] 7.6 / 101
10-section Zack marker strip ZB 7,62 with Height (NS 35/7,5 / NS 35,15) [mm] 55 .5 / 63
Technical data in accordance with IEC / DIN VDE
vertical printing. Group labels and/or
Max . load current i cross section [A]/[mm'[ 30/4
section formation is possible by means of Rated surge voltage / contamination class [kV] / - 6/3
the 1 .5 mm thick group marker plate, Surge voltage category / insulating material group -, - III / I
SAD-VKK 4 . Connection capacity
Stranded with ferrule without! with plastic sleeve [mmi] 0 .25-2 .5/0 .25-2 .5
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded [mm/) 0 .2-1/0 .2-1 .5
Stranded with ferrules without plastic sleeve [mm7 ] 0 .25 - 1 .5
Stranded with TWIN ferrule with plastic sleeve [mm''] 0 .5 - 1 .5
Stripping length [mm] 7
Internal cylindrical gauge (IEC 60 947-1) A3
Thread M3
Torque [Nm[ 0 .6 - 0 .8
Insulation material PA
Inflammability class in acc . with UL 94 V2
') Current and voltage data for slip-on connections in acc . with -) The nominal voltage amounts to 250 V when using the potential
EN 61 210 are also dependent on nom . size, material, insulation busbar S-FS(2,8-0,8).
of the connection sleeve and conductor cross section . ') See load diagram above.
344 Phoenix Contact


Double-level terminal blocks

with screw/slip-on connection

UKK 4-FS UKK 4-FS/FS

Terminal width 6 .2 Terminal width 6 .2
(IEC) rigid flexible I U I U
[mm =] solid stranded AWG [A] [V] [A] [V]
Connection data 0 .2-4 0 .2-4 24-12 20 400 Connection data 20 ) 400
Slip-on connection 6 .3/2 .8 x 0 .8 mm ') ') Slip-on connection 6 .3/2 .8 x 0 .8 mm I)

Description Color Type Order No . Pcs. Type Order No . Pcs.

Pkt. Pkt.

Double-level terminal block. with universal fool for

mounling on v or i-_r, with screw connection and slotted UKK 4-FS 27 70 56 1 50
6.32 .8 mm flat plugs
Double-level terminal block, as above, however,
~
with slotted 6 .3/2 .8 mm flat' plugs on both sides UKK 4-FS/FS . 2771133 50

Cover Gray D-UKK 4 27 70 55 8 50 D-UKK 4 2770558 50

Fixed bridge, for cross connections in the

terminal center, screw heads with insulating . '.l u U U FBI 10-6 I mp, : 20 A 02 03 25 0 10 FBI 10-6 1,,,, .: 20 A 02 03 25 0 10
liar, 10-position, divisible, with 10 screws 1TT~~
rtion bridge, fully insul ., 2-pos . EB 2-6 I,,,, :20A 0201155 100
insulated . 3-pos . EB 3-6 20 A 02 01 14 2 100
uvisible . insulated spine 10-pos . EB 10-6 20A 0201139 10
Isolator bridge bar, 10-position, divisible, with 10 ISSBI 10-6 I,, .,, : 20 A I 03 01 50 5 10 ISSBI 10-6 I,,,, : 20 A 03 01 50 5 10
taws. for switchable branches with UUpUp
Bridge bar IS-K 4 as distance piece IS-K 4 1302338 100 IS-K 4 13 02 33 8 100
Test socket, for test connection with MPS test
plug or RPS reducing plug PSB 3/10/4 06 01 29 2 100 PSB 3/10/4 06 01 29 2 100

Teat socket, insulated, only used above FBI, KB,

ISSBI, for test connections with test plug NIPS or PSBJ 3113/4 02 01 30 4 100 PSBJ 3/13/4 0201304 100
RPS
Screwdriver
SZS 0,6 x 3,5 1205053 10

Zack marker strip, 10-section

White ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)

Dimensions
Width ! length I cover width [mm[ 6 .2/72/1 .5 6 .2 / 72 / 1 .5
Height NO 3527,5 / NS 35/15 / NS 32) [mm] 59 / 66 .5 / 64 59 / 66 .5 / 64
Technical data in accordance with IEC /DIN VDE
Max . load current / cross section [A]/[mm-] 20/4
Max . cross section with insertion bridge (solid/stranded) [mm,] 4/2 .5
Rated surge voltage / contamination class [kV] / – 6/3
Surge voltage category / insulating material group -, - II/I
konnection capacity
Stranded with ferrule without / with plastic sleeve 0 .25-4/0 .25-2 .5
Yiltl-conductor connection (2 cond . with same cross section)
Solid / stranded [mm°] 0 .2-1/0 .2-1 .5
Stranded with ferrules without plastic sleeve [mm ,l 025-1 .5
Stranded with TWIN ferrule with plastic sleeve [mm,] 0 .5-1 .5
Stopping length [mm] 8
Internal cylindrical gauge (IEC 60 947-1) A4
Thread M3
Torque [Nm] 0 .6 - 0 .8
Insulation material PA PA
nflammaoility class in acc. with UL 94 V2 v0
proval data (UUCUL and CSA)
final voltage/current ., conductor sizes UUCUL : [V[ / [A] / AWG 300/20/30-10 300/20/-

Important note : ') Current and voltage data for slip-on connections in acc . with ,) Dependent on the slip-on connection sleeve.
In order to bridge the terminal blocks, remove the prescored EN 61 210 are also dependent on nom . size, material, and
separating plate insulation of the receptacle and conductor cross section.

Phoenix Contact 345



Universal terminal blocks for

screw and solder connection

UK 2,5 types
The soldering tags are in a zigzag
arrangement in order to increase the
mutual insulation spacing and to improve
accessibility with the soldering iron . The
soldering tag dimensions are 2 .8 x 0 .8 mm,
which means that a common connection
sleeve in accordance with DIN 46 247 can
also be pushed on.
The soldering tags have a 1 .2 mm 0
external hole in which solid connecting
conductors up to 1 .5 mm 2 can be
positioned and soldered to provide strain
relief. Behind the hole there is a notch . This Terminal width 6 .2
(IEC) rigid flexible I U
makes it easier to wrap thin connecting [ mm2 ] solid stranded AWG [A] [V]
conductors or establish bridging Connection data 0.2-2 .5 0.2-1 .5 24-14 17.5 500`
Solder connection 0 .2-1 .5 0 .2-0 .75 24-16
connections to neighboring terminal blocks. Slip-on connection 6 .3/2 .8 x 0 .8 mm
17.5
I)
500

An important prerequisite for correct

solder points is for the heat provided by the
soldering iron not to be "absorbed " by the
subordinate metal parts . This is particularly Description Color Type Order No. Pkt.
important for thin connecting conductors
Terminal block, with universal foot for
with sensitive insulation . For this reason the mounting on L..) or v _r, screw cone . on Gray UK 2,5-LOER 30 13 01 0 50
soldering tag has an internal heat bottleneck left, solder connection on right
with low thermal capacity at the end . At this Terminal block, as above, but with
solder connection on both sides Gray UK 2,5-LOE/LOE 3011012 50
point, it also has a 2 .3 mm 0 socket hole,
enabling a test plug to be inserted from
Cover Gray D-UK 2,5 30 01 02 2 50
above for voltage connection (through the
screw shafts). Fixed bridge, for cross connections in the
terminal center, screw heads with insulating not bridgeable in terminal center
collar, 10-position, divisible . with 10 screws.
it
UK 4 types Insertion bridge, fully insul ., 2-pos . . EB 2-6 1 . , 17 .5 A 0201155 100
fully insulated, 3-pos. EB3-6 17 .5 A 0201142 10
These terminal blocks are designed for divisible, insulated spine 10-pos. EB 10-6 17 .5 A 0201139 10
large connection cross sections and a Isolator bridge bar, 10-position, divisible, with 10
screws, for switchable branches with
variety of circuitry options. Bridge bar IS-K 4 as distance piece
The robust soldering flags allow Switch bar for 2 terminal blocks, complete, to
connecting conductors of up to 2 .5 mm 2 to increase insulation an end cover must be
interposed
F Al
be soldered on with strain relief. Separating disk, for electrical separation of
neighboring bridges, can be fitted later, no loss of
pitch
Partition plate, for visual and electrical
separation of terminal groups, 1 .5 mm thick ATP-UK 30 03 22 4 50

Test socket, for test connection with MPS test

plug or RPS reducing plug not necessary

Test socket, insulated, only used with FBI, ISSBI,

for test connections with test plug MPS or RPS D)

Screwdriver
f SZS 0,4 x 2,5 1205037 10

Zack marker strip, 10-section

White ZB 6 (for order data, see page 397)

Dimensions
Width i length / cover width [mm) 6 .2 / 42 .5 / 1 .5
Height (NS 35/7,5/ NS 35/15 / NS 32) [mm] 42 / 49 .5 / 47
'! : Technical data in accordance with IEC / DIN VDE
q 36 37 38 38 ;~ at Max . load current / cross section
35 [A]/[mm 2] 17.5 / 2.5
Max . cross section with insertion bridge (solidistranded) [mm"] 1 .5 /1
Rated surge voltage / contamination class [kV] / - 6/3
Surge voltage category / insulating material group -/- III/I
Connection capacity
Stranded with ferrule without / with plastic sleeve [mm'[ 0 .25-1 .5/0 .25-1 .5
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded [mm ] 0 .2-1/0.2-1
Stranded with ferrule without plastic sleeve [mm') 025-1
Stranded with TWIN ferrule with plastic sleeve [mm2 ] 0 .5-1 .5
Stripping length [mm] 6
Internal cylindrical gauge (IEC 60 947-1) Al
Thread M2 .6
Torque [Nm] 0 .5 - 0 .6
') Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, and Insulation material PA
insulation of the receptacle and conductor cross section. Inflammability class in acc . with UL 94 V2
Approval data (ULICUL and CSA)
Nominal voltage + current conductor sizes UUCUL : [V] / [A] i AWG
346 Phoenix Contact


Double-level terminal blocks

with screw/solder connection

UK 4-LOER UKK 3-LOER

Terminal width 5 .2
rTerminal width 6 .2
IEC)
(Ien1z ]
rigid
solid
flexible
stranded AWG
I
[A]
U
[V]
(IEC)
[mm2]
rigid
solid
flexible
stranded AWG
I
[A]
U
[V]

Connection data 0.2-4 0.2-4 24-12 24 500 Connection data 0 .2-4 0 .2-2 .5 24-12 15 400
Solder connection 0 .2-2 .5 0 .2-1 .5 24-14 24 500 Solder connection 0 .2-1 .5 0 .2-1 .5 24-16 15 400

Pcs. P03.
Order No . Description Color Type Order No.
Pkt. Pkt.

Terminal block, with universal foot for

UK 4-LOER 30 14 01 9 50 mounting on v or u Gray
Blue
UKK 3-LOER
UKK 3-LOER BU
27 78 01 3
27 78 09 7
50
50

UK 4-LOE/LOE 3012011 50 Cover Gray D-UKK 3/5 27 70 02 4 50

Blue D-UKK 3/5 BU 27 70 10 5 50
Spacer cover. compensates for level
0-UK 4/10 30 03 02 0 50 offset if standard terminal blocks are to Gray DG-UKK 3/5 27 70 81 7 50
be fitted adjacently. 2 .5 mm thick Blue DG-UKK 3/5 BU 2770260 50
Spacer plate, compensates
RBI 10-6 l,- a , : 24 A 02 03 25 0 10 for level offset if standard terminal blocks are aligned DP-UKK 3/5 2770794 50
in rows. 2 .5 mm thick
,2-6 24 A 02 01 15 5 100 Insertion bridge. divisible,
3-6 24 A 02 01 14 2 100 insulated spine 10-pos. E B L 10-5 13 .5 A 23 03 13 2 10
.d 10-6 24A 0201139 10
ISSBI 10-6 I, : 24 Al 03 01 50 5 10 Separating disk, for electrical separation of
neighboring bridges, can be fitted later . no loss of pitch TS-KK 3 27 70 21 5 100
B-K 4 1302338 100
Partition plate, for visual and electrical
USBR 2-7 :23A 23 03 23 9 1 separation of terminal groups . 1 .5 mm thick ATP-UKK 3/5 27 78 52 1 50

Screwdriver
TS-K 13 02 21 5 100 SZS 0.6 x 3,5 1205053 10

Zack marker strip, 10-section

ATP-UK 30 03 22 4 50 White ZB 5 (for order data, see page 397)

Dimensions
PSB 3/10/4 06 01 29 2 100 Width I length I cover width [mm] 5 .2 / 70 .512 .5
Height (NS 35/7 .5 / NS 35./15 / NS 32) [mm] 62 / 69.5 / 67
Technical data in accordance with IEC / DIN VDE
PSBJ 3/13/4 02 01 30 4 100
Max . load current ! cross section [A]/[mm2] 15/4
Max . cross section with insertion bridge (solid/stranded) [mm2] 2 .5 / 2 .5
1205053 10 Rated surge voltage ! contamination class [kV]I- 6/3
SZS0 .6x3,5
Surge voltage category / insulating material group -1- III !I
Connection capacity
Z86 (for order data, see page 397) Stranded with ferrule without / with plastic sleeve :mm-] 0 .25-2 .5/0 .25 - 1 .5
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded [mm-] 0.2 - 1 / 0 .2 - 1 .5
6.2 / 56 / 1 .5 Stranded with ferrules without plastic sleeve [mm2] 0 .25 - 1
47 / 54 .5 / 52 Stranded with TWIN ferrule with plastic sleeve [mm2] 0 .5 - 1 .5
Stripping length [mm] 8
24/4 Internal cylindrical gauge (IEC 60 947-1) A3
2 .5 / 2 .5 Thread M3
6/3 [Nm] 0 .6 - 0.8
Torque
III / I Insulation material PA
Inflammability class in acc . with UL 94 V2
0 .25 - 4 / 0 .25 - 2 .5

0.2-1/0 .2-1 .5
0.25-1 .5
0 .5-1 .5
13
A3
M3
0 .6-0 .8
PA
V2

250 ! 25 .28 - 12
Phoenix Contact 347


Terminal blocks for Wire-

Wrap ® and TERMI-POINT ®
connections

UK 4-TP
Terminal width 6.2
(IEC) rigid flexible I U
[mm2] solid stranded AWG [A] [V]
Connection data 0 .2-4 0 .2-4 24-12 10 250
per WW conn . [mm] 1 x 1 26-20 10 250
per TP conn . [mm] 1 .6 x 0.8 28-22 4 250
per TP conn . [mm] 2 .4 x 0.8
With the Wire-Wrap"' connection 24-20 5 250

principle, it is possible to connect up to 3

conductors per plug . Two pin dimensions
are common : 1 x 1 mm and 0 .6 x 0 .6 mm. Description Color Type Order No. Pcs.
Pkt I
The length of the pin is usually measured for
Universal terminal block, with universal foot
three coils. The connection must be broken for mounting on C or.r,c with UK 4-WW (1 x 1) 3086076 50
to release it and in this case it is destroyed 1 x 1 WW pin
Universal terminal block, with TP pin 1,6 x 0 .8,
for ever. longitudinal pin for vertical mounting UK 4-TP (1,6 x 0,8) L 30 86 00 5 50
German suppliers of wrapping tools are: transverse pin for horizontal mounting UK 4-TP (1,6 x 0,8) Q 3086018 50
Universal terminal block, with TP pin 2 .4 x 0 .8,
Cooper Tools GmbH, longitudinal pin for vertical mounting UK 4-TP (2,4 x 0,8) L 30 86 02 1 50
74354 Besigheim, Germany transverse pin for horizontal mounting UK 4-TP (2,4 x 0,8) 0 30 86 03 4 50
Phone :++49/71 43/58 00
Cover D-UK 4/10 30 03 02 0 50
Fax :++49/71 43/58 01 08
The TERMI-POINT® versions are Spacer cover, compensates for level offset if
standard terminal blocks are to be fitted
differentiated according to the position of adjacently, 2 .5 mm thick
the plug, which is either longitudinal or Spacer plate, compensates for level offset if
standard terminal blocks are to be fitted
transverse to the terminal block . In order to adjacently, 2 .5 mm thick
ensure easy handling of the tool, the Fixed bridge, for cross connections in the -i ttNY~7r
terminal center, screw heads with insulating II :I! li II II :I 1. .II. FBI 10-6 10 A 0203250 10
longitudinally arranged pins should be used collar, 10-position, divisible, with 10 screws 1 ['. ] [ - ".
for vertically mounted terminal strips and Insertion bridge, fully insul ., 2-pos. EB 2-6 l,, :10A 0201155 100
the transverse pins for the horizontally fully insulated, 3-pos. i h{ i 'l EB3-6 10 A'i 0201142 100
10-pos. .. 1
divisible, fully insulated EB10-6 10A 0201139 10
mounted terminal strips. Partition plate, for visual and electrical
separation of terminal groups, 2 .5 mm thick
The length of the pins is usually
dimensioned for shooting on 3 connections. Screwdriver
The pins are available in the following SZS 0,6 x 3,5 1205053 10

dimensions: Zack marker strip, 10-section

0.6 x 0 .6 mm . . . Mini TERMI-POINT® White ZB 6 (for order data, see page 397)

0.8 x 1 .6 mm . . . Standard TERMI-POINT® Dimensions

0.8 x 2 .4 mm . . . Maxi TERMI-POINT® Width / length / cover width [mm] 6.2 / 42 .5 / 1 .8
Height (NS 35/7,51 NS 35/15 / NS 32) [mm] 68 / 75 .5 / 73
Technical data in accordance with IEC 1 DIN VDE
The supplier in Germany is:
Max . load current i cross section [A]/[mm ui 10/4
AMP Deutschland, Max . cross section with insertion bridge (solid/stranded) [mm 2]
63225 Langen, Germany Rated surge voltage / contamination class [kV] / - 4/3
Surge voltage category / insulating material group -!- III/I
Phone : ++49/61 03/70 90
Connection capacity
Stranded with ferrule without / with plastic sleeve [mm2] 0 .25 - 4 / 0.2 - 1 .5
Multi-conductor connection (2 cond . with same cross section)
Solidi stranded [mm ,] 0 .2-1/0 .2-1 .5
Stranded with ferrules without plastic sleeve [mm-] 025-1 .5
Stranded with TWIN ferrule with plastic sleeve [mm 2] 0 .5-2 .5
Stripping length [mm] 9
Internal cylindrical gauge (IEC 60 947-1) A3
Thread M3
Torque [Na] 0 .6-0.8
Insulation material PA
Inflammability class In acc. with UL 94 V2
Approval data (UUCUL and CSA)
Nominal voltage current conductor sizes UL/CUL : [V] / [A] / AWG

348 Phoenix Contact



UK 4-TP/TP UKKB 3-TP

Terminal width 6 .2 Terminal width 5 .2
[IEC) rigid flexible I U (IEC) rigid flexible I U
[nm2] solid stranded AWG [A] [V] [mmz [ solid stranded AWG [A] [V]
Connection data 10 250 Connection data 0 .2-4 0 .2-2 .5 24-12 10 250
per TP cond . [mm] 2 .4 x 0 .8 24-20 5 250 per TP cond . [mm] 2 .4 x 0 .8 24-20 5 125

Nan
Pcs. Pcs.
Type Order No . Type Order No .
Pkt . Pkt

UK 4-TP/TP (2,4 x 0,8) L 30 86 04 7 50 UKKB 3-TP (2,4 x 0,8) L 27 73 25 4 50

UK 4-TP/TP (2,4 x 0,8) Q 30 86 06 3 50 UKKB 3-TP (2,4 x 0,8) Q 27 73 26 7 50

041K 4/10 30 03 02 0 50 D-UKKB 3/5 27 71 02 3 50

DG-UKKB 3 27 70 85 9 50

DP-UKKB 3 2770804 50

EBL 10-5 I .. : 10 A 23 03 13 2 10

ATP-UKKB 3 2771065 50

SZS 0,6 x 3,5 12 05 05 3 10

Zl:l 6 (for order data, see page 397) ZB 5 (for order data, see page 397)

6 .2/42 .5/1 .8 5 .2/67/2 .5

68/75.5/73 85/92.5/90

10/0 .5 10/4
4/2 .5
4/3
III / I

0 .25 - 2 .5 / 0 .25 - 1 .5

0 .2 - 1 / 0 .2 - 1 .5
0 .25-1 .5
0 .5 - 1 .5
8
A3
M3
0.6 - 0 .8
PA PA
V2 V2

300/5/28-12

Phoenix Contact 349



Marshalling plugs

Dimensional drawing

!®® e, !!INIIN®B9 146

90
38

~~®®a®®®®® gm ygyl ~
11PE118MIFIBEMIME01@ Maoism
poispiRto

MIMIItI Il lYil 1
OM1' !PI IMIii
MS MIDB §180111181W

etimem ptommom W 80/80

80-position with 6.32 .8 mm flat plugs

I U
[A) M
Connection data 16 1000
Slip-on connection 6 .3/2 .8 x 0 .8 mm ') ')
General information
High packing density, a practical
connection principle and easy mounting are
the main features of these marshalling plugs.
In accordance with the 8-bit pattern, 10 Description Type Order No . Pcs.
Pkt.
rows of 8 chambers are arranged
Marshalling plug, 80-position, per chamber:
horizontally in the marshalling plug housing. one metal part with three 6 .3/2 .8 mm flat W 80/80-FS/FS (12-2,8-0,8) 06 11 01 7 5
The marshalling plugs are available with plugs on both sides
Marshalling plug, 160-position, per chamber:
the following connection techniques and two metal parts with two 2 .8 mm flat plugs on both
combinations of these: sides
6 .3/2 .8 mm plug-in connection Marshalling plug, 80-position, per chamber: one metal part
with three 6 .3_/2 .8 mm flat plugs on one side and two 6 .3/2 .8
Solder connection mm flat plugs and a solder connection on the other side
Wire-Wrap' (WW) connection Marshalling plug, 80-position, per chamber: one metal
part with two 1 .5 mm2 spring-cage connections on one
TERMI-POINT (TP) connection and side and three 6 .3/2 .8-mm flat plugs on the other side
Spring-cage connection. Holder, for mounting on u, U, i f . for fixing
marshalling plugs, aluminum . dimensions see drawing W 80-T/AL-NS 35 06 14 19 5
Each marshalling plug element can be above
marked with the standard labels, while the Potential busbar with slotted 6 .3/2.8 mm flat plugs,
brass, tin-plated . length : 1 m ~,a~":AMR
S-FS (2,8 x 0,8) In,p , : 40 A 31 91 69 9
individual chamber coordinates are marked OOO

with marker pins. Plastic sheath'), as touch protection,

for 6 .3 slip-on sleeves PT/FS 6,3 06 04 70 7 500
The potential busbar is subsequently for 2 .8 slip-on sleeves PT/FS 2,8 14 06 70 0 500
inserted in grooves in the fitted marshalling Guide ring plastic, for looming conductors : is screwed
on the supporting frame, bore hole : 6 mm 0
plug blocks . This allows the reference W 80-FR 06 14 00 1 10

voltage levels such as supply voltage, control Equipotential busbar, with 2 .4 x 0-8 TP pins, pin
ground or shielding to be comfortably spacing 7 .62 mm, bronze . tin-plated,
length : 0 .76 rn
supplied at any point . Zack marker strip, 10-section,
White ZB 6 (for order data, see page 397)

Assembly Marker pin, plastic,

The antitorsion polyamide housing is unprinted : for individual labeling with M-PEN, - BN W H 14 01 40 4 100
printed : with 1, 2 or 3-figure characters, white BNB WH : . . .') 14 01 41 7 100
provided with 4 mounting flanges which Dimensions see dimensional drawing
overlap neighboring marshalling plugs and Technical data in accordance with IEC / DIN VDE
simplify fitting. This means : dimensionally Total current per metal part [Al 16
Rated surge voltage / contamination class [kV] / - 8/3
correct mounting with one screw for two
Surge voltage category! insulating material group III/I
flanges. Connection capacity
Using the W 80-T/AL-NS 35 holder for Stranded with 2 .6 mm slip-on sleeve [mrm`I
the marshalling plug, any number of blocks Stranded with 6 .3 mm slip-on sleeve [mm2)
Insulation material PA-F
can be aligned next to each other on the Inflammability class in acc . with UL 94 HB
DIN rails, NS 35/7,5, NS 35/15 or ') Current and voltage data for slip-on connections in acc . with -) Dependent on the slip-on connection sleeve.
NS 35/15-2,3 . The holder is made of EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.
aluminum and is fixed on the DIN rail in a
pitch matching the dimensions of the
marshalling plug.
If marshalling plugs are to be mounted
adjacently and on the top of each other, a
supporting frame of 10 x 10 mm profiles is
necessary.

350 Phoenix Contact



W 80/160 W 80/80-FS/LOE W 80/80-FK 1,5/FS

160-position with 2 .8 mm flat plugs 80-position with 6 .3/2.8 mm flat plugs 80-pos . with spring-cage connection and one-side
and a solder connection on one side 6 .3/2 .8 mm slip-on connection
U (IEC) rigid flexible rigid flexible I U
[V] [mm'] solid stranded AWG [A] [mm') solid stranded AWG [A] [V]
Comedian data 400 Connection data 16 Connection data 0 .5-2 .5 0 .5-2 .5 24-14 10 250
) 24-16 16 Slip-on connection 6 .3/2 .8 x 0 .8 mm
Sip-on connection 2 .8 x 0 .8 mm Connection data 0.2-1 .5 0 .2-1 .5
Slip-on connection 6 .3/2.8 x 0 .8 mm

Pcs. Pcs. Pcs.

Order No . Type Order No . Pkt . Type Order No . Pkt.
Pkt .

W801160-FSI/FSI (4-2,8-0,8) 0612016 5

W 80/80-FS/LOE 1 06 11 02 0 5

W 80/80-FK 1,5/FS (6-2,8-0,8) 06 13 01 5 4

80-T/AL-NS 35 0614195 2 W 80-T/AL-NS 35 0614195 2 W 80-T/AL-NS 35 0614195 2

5-FS (2,8 x 0,8) 40 A 31 91 69 9 S-FS (2,8 x 0,8) Im„ : 40 A 31 91 69 9 1 S-FS (2,8 x 0,8) Imo 40 A 31 91 69 9 1

PTUFS 6,3 06 04 70 7 500 PT/FS 6,3 0604707 500 PT/FS 6.3 0604707 500
PT/FS 2,8 1406700 500 PT/FS 2,8 1406700 500 PT/FS 2,8 1406700 500

W80-FR 0614001 10 W 60-FR 0614001 10 W 80-FR 0614001 10

S-TP (2,4 x 0,8) 31 91 70 9

ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)

BN WH 1401404 100 BN WH 1401404 100 BN WH 1401404 100

BNB WH : . . .') 1401417 100 BNB WH : . . .`) 1401417 100 BNB WH : . . ."-) 1401417 100
see dimensional drawing see dimensional drawing see dimensional drawing

16 16 10
6/3 6/3 4/3
III /I III/I III/I

PA-F PA-F PA-F

HB HB HB

Required marking is to be specified, see page 404 . i, ) For conductors up to 1 .5 mm' .

Phoenix Contact 351



Marshalling distributor RV 4
Load diagram for RV 4, RV 8, and
RVS 10 in acc . with
IEC 60 512-3/DIN IEC 60 512-3

Operating current depending on ambient temperature and

number of connections per pin if all pins are under load
(conductor cross section 0 .5 mm2)
0

RV 4 (2,4 x 0,8)
Terminal width 7 .62
10 20 30 40 50 60 70 80 90 100 (IEC) rigid flexible
Ambient temperature ['CI [mm] solid stranded AWG
TP connection 2 .4 x 0 .8 24-20
Q Wire-Wrap, or 1 TERMI-POINT"ii : connection ' see load diagram
The RV 4 elements can be used to form Q Wire-Wrap° or 2 TERMI-POINTEii i connections
frontal pin field connections for 2 .4 x 0 .8 o Wire-Wrap.i i or 3 TERMI-POINT` connections
TERMI-POINT C'(TP) connections . The TERMI-POINT'i = trademark of AMP Incorporated
4-position incoming and outgoing lines are
mirror images of each other due to the Description Color Type Order No . Pcs.
I
Pkt.
U-shaped design of the metal pin, thus
Marshalling distributor, 4-pos ., with universal foot for
providing clear wiring of multiconductor mounting on v or u . Alternate pairs in gray and yellow
cables twisted in groups of 8 . The pin length with 2 .4 x 0 .8 TP pins

is sufficient for three clip connections one pins longitudinal for vertical mounting RV 4 (2 .4 x 0,8) L 31 90 01 4 50
transverse pins for horizontal mounting RV 4 (2,4 x 0,8) Q 31 90 21 8
above the other. 50
End element, 7 .62 mm wide, also
Yellow and gray housings are alternated for forming sections Gray D-RV 4 GY 31 90 02 7 20
in pairs in order to visually emphasize the Yellow D-RV 4 YE 31 90 22 1 20
STG 1-RV/L 31 90 12 4
groups of twists of 8 . Eyelets on the side of Module plug housing, for 1-pos.
STG 2-RV/L
10
longitudinal pins. color: gray, for 2-pos. 31 90 13 7 10
the housing facilitate tidy cabling. fitting the module socket contacts 8-pos. STG 8-RV/L 31 90 19 5 10
STG-MTN 10-pos. STG 10-RV/L 31 90 20 5 1
Plug connections are realized with the
aid of module socket contacts and module
plug housings, whereby a maximum of 8 Module plug housing, for
transverse pins, color : black, for
positions can be combined in function fitting the module socket contacts 2-pos. STG 2-RV/Q 31 90 24 7 10
groups . These are protected against STG-MTN 8-pos. STG 8-RV/Q 31 90 30 2 10

mechanical stress by the strain relief, STGZ

or STGZ 1. Module socket contact, is inserted into plug
housing STG alter the conductor has been
crimped.
for conductors from 0.5 to 1 mm- STG-MTN 0,5-1,0 31 90 43 8 100
Plug connections for RV 4, RV 8 and
RVS 10 marshalling distributors Contact removal tool, for removing the
Plug-in connections are effectively made module socket contacts STG-E W 31 90 44 1

using the socket contacts and module plug Strain relief, for STG 8-position plug housings.
housings allowing 16 positions max . to be with coupling spring on one side STGZ BK 31 93 13 4 10
with double-sided coupling spring STGZ 1 BK 31 93 14 7 10
combined in function groups . These are
Crimping pliers, for crimping conductors to the
protected against mechanical stress by module socket contacts STG-MTN CRIMPFOX MT 2,5 1204038 1
means of the strain relief, STGZ, STGZ 1
Zack marker strip . 10-section
and STGZ 10-RVS and STGZ 20-RVS or the White ZB 6 (for order data. see page 397)
cable housing, KGS-RV 10 or KGS-RVS 10 .
Dimensions
Width / length [mm) 7 .62 / 103
Height (NS 35/7 .5 / NS 32) [mm] 61/66
Technical data in accordance with IEC / DIN VDE
Rated surge voltage / contamination class [kV] / — 4/3
Surge voltage category / insulating material group — /— III / I
Insulation material PA
Inflammability class in acc . with UL 94 V2

I 1 ' il
I I E Plug housing . longitudinal, for
RV 4 (2 .4 x 0,8) ...
11 1 i[
III

Plug housing, transverse, for

RV 4(2 .4x0,8) . ..

352 Phoenix Contact

RV 4 (2,4 x 0,8) L RV 4 (2 .4 x 0 .8) 0


Marshalling distributors
RV8 and RVS 10

The marshalling distributors have

ht and ten 2 .4 x 0 .8 mm TERMI-
I
INT'N (TP) pins respectively for incoming
,d outgoing conductors on either side of
the raised labeling rib . Between the
connection panel and the labeling rib, the
RV8element has two housing grooves into
which potential busbars can be inserted.
The external cross bars function as a
cable duct side wall . The red/white marking
masks with alternate negative/positive
labeling with 1-8 and 1-10 or a-h and a-k RV 8-TP (2 .4 x 0 .8) RVS 10-TP (2,4 x 0,8)L
clearly separate the rows of pins.
Element width 7 .62 Element width 6 .2
(IEC) rigid flexible I U (IEC) rigid flexible I U
[mm] solid stranded AWG [A] [V] [mm] solid stranded AWG [A] [V]

TP connection 2 .4 x 0 .8 24-20 5' 250 TP connection 2 .4 x 0 .8 24-20 250

' See load diagram page 352. ' See load diagram page 352.

'i witcross connection for NLS-CU 6/6 (04 02 16 1)

TERMI-POINT-" = trademark of AMP Incorporated

Pcs. Pcs.
Type Order No Type Order No .
Description Pkt. Pkt.

Marshalling distributor, 8-position, with

siding loot for mounting on Lr, with
2.4x 0 .8 TP pins

a)ongitudinal pins for vertical mounting a) RV 8-TP (2,4 x 0,8) L 31 91 01 3

"transverse pins for horizontal mounting b) RV 8-TP (2 .4 x 0,8) O 31 91 21 7

Marshalling distributor'), as above, but

esequipotential bonder with bridged pins, RV 8-PV-TP (2,4 x 0,8) L 31 91 03 9 5
phs longitudinal for vertical mounting
Marshalling distributor, 10-position, with
siding foot for mounting on u, with RVS 10-TP (2,4 x 0,8)L 31 92 03 8 5
0 .8 TP pins

Ni element, 7.62 or 6 .2 mm wide, also for

ng sections, color : Gray D-RV 8 31 91 02 6 5 D-RVS 10 3191437 5

Equipotential busbar , with slotted 6 .3/2 .8 mm

bat plugs . max. 40 A, brass, tin-plated, length : 1 m S-FS(2,8-0,8) 31 91 69 9

Equipotential busbar, with 2.4 x 0 .8 TP pins, pin

spacing 7 .62 mm, bronze, tin-plated, length : 0 .76 m S-TP (2,4 x 0,8) 31 91 70 9 1

damp set, for holding together RV .. . blocks, sufficient

kr80 (RV 8) or 90 (RVS 10) marshalling distributors RV 8-SPSA 31 93 01 1 1 RV 8-SPSA 3193011

Prot marking masks, in positive/negative,

MMNNMMMM
We/red print for marking the individual pins,
silo horizontal printing,
bent 1-8, back 8-1
KZMP-RV 8 : 1-8 3191330 10 KZMP-RVS 8 : 1-10 3191408 10
bunt a-h, back h-a
KZMP-RV 8 : A-H 31 91 32 7 10 KZMP-RVS 8 : A-K 31 91 37 2 10

Cable housing, 40-position complete with

KGS-RV 10 31 92 10 6 10 KGS-RVS 10 31 90 45 4 10
crimp contacts

Module plug housing, for

1-pos. STG 1-RV/L 31 90 12 4 10 STG 1-RV/L 31 90 12 4 10
knghadinal pins, color : gray, for
2-pos. STG 2-RV/L 31 90 13 7 10 STG 2-RV/L 31 90 13 7 10
tang the module socket
8-pos. STG 8-RV/L 31 90 19 5 10 STG 8-RV/L 31 90 19 5 10
contacts STG-MTN (page 352)
10-pos. STG 10-RV/L 31 90 20 5 10 STG 10-RV/L 31 90 20 5 10

Module plug housing, for

bansverse pins, color : black, for
ttlng the module socket 2-pos. STG 2-RV/O 31 90 24 7 10
contacts STG-MTN (page 352) 8-pos. STG 8-RV/CI 31 90 30 2 10

Stain relief, for STG 8-position plug housings,

nth coupling spring on one side STGZ BK 3193134 10
talk double-sided coupling spring STGZ 1 BK 3193147 10
Strain relief,
"with single-sided coupling spring, for one a) STGZ 10-RVS 31 92 06 7
10-position plug housing
"with double-sided coupling spring for two bj STGZ 20-RVS 31 92 05 4 25
0-position plug housings

sions
/ length [mm] 7 .62 / 202 6 .2 / 202
[mm] 81 .5 81 .5
Height (NS 357.5)
khnical data in accordance with IEC / DIN VDE
[kV] / — 4/3 4/3
Rated surge voltage / contamination class
Surge voltage category / insulating material group –/ III/I III/I
Insulation material PC PC
Inflammability class in ace . with UL 94 VD Vo
Phoenix Contact 353


Miniature circuit-breakers

Circuit-breakers with electronic

triggering
The electronic triggering of the ECP is
specially designed for the selective
safeguarding of all load circuits that are
supplied by a DC 24 V power supply unit.
Switched-mode power supplies switch
off their output and all connected loads for
their own protection as soon as an overload
or short circuit occurs in a load branch due
to a fault.
In this context, selectivity means that
the ECP reacts more quickly to the
overload or short circuit conditions in a
load circuit than the switched-mode power
supply does and therefore only switches off
the faulty circuit.

Miniature circuit-breakers with

thermomagnetic triggering
Signaling contacts Backup fuse
The combination of thermal and
Socket base TMCP-SOCKET-M allows A backup fuse together with a circuit-
magnetic triggering effectively protects
individual signaling via the connections 11 breaker must always be used if there is the
against overload as well as short circuits.
and 12 . The signal can be called up risk of the maximum switching current
Short circuit currents cause the magnetic
separately for each circuit-breaker. A signal being exceeded in the event of a fault . The
part of the characteristic curve to operate
loop over all circuit-breakers can be realized maximum switching current, the internal
almost without delay. Typical applications
quickly and without additional wiring via resistance and the resulting backup fuse are
are in the area of information and
connections 13 and 14 in the termination shown in the table below.
communication technology, process
elements ; all electrical connections of the
controls, and with devices and systems that
main contacts and signal contacts are
require a high degree of protection against
located in the socket element . (see TMCP
overload and short circuits . All
wiring diagram)
thermomagnetic circuit-breakers have TMPC circuit diagram

integrated auxiliary contacts for individual

Device 1 Device 2
monitoring of the switching status . ti
1 1
0 0
Miniature circuit-breakers with 11 0 011

thermal triggering
The thermal triggering of equipment 7
\-\l
circuit-breakers depends on the level of the
overload current . This makes them ideally 130- 0 0 0 0 014
2 12 2 12
suited as device protection for AC and DC
consumers, e .g . to protect motors, Diagram and definitions when switched off and without current.

transformers and actuators against

overloads . The equipment circuit-breaker TMCP and TMC nominal currents, internal resistances and backup fuses
TCP can be inserted in basic terminal blocks
and thus mounted on rails . An integrated Nominal Max . backup Internal resistance [52] Switching capacity
switching function (press/press actuation) current fuse in acc . with
ensures high availability and high flexibility of F1 (fast blow) Ml (normal EN 60 934
the system. [A] [A] for DC for DC/AC [A]
0 .2 Any 39 .3 26 .1 400
Power distribution through socket 0 .3 Any 17 .5 11 .6 400
assembly 0 .4 Any 9 .2 6 .6 400
The thermomagnetic circuit-breaker 0 .5 Any 6 .8 4 .1 400
TMCP and the electronic circuit-breaker 0 .6 Any 4 .2 3 400
ECP are characterized by their user-friendly 0 .8 Any 2 .8 1 .65 400
modular design . The TMCP-SOCKET-M 1 Any 1 .6 1 .10 400
socket element is used to mount the circuit- 1 .5 25 0 .78 0 .47 400
breakers on rails, allowing flexible 2 25 0 .42 0 .28 400
installation with any number of positions . In 2 .5 25 0 .26 0 .183 400
addition, a free combination of the two 3 25 0 .18 0 .124 400
circuit-breaker types on one module allows 4 25 0 .12 0 .077 400
individual protection, regardless of which 5 25 0 .092 0 .063 400
load is to be protected . The termination 6 50 0 .054 0 .045 800
elements TMCP-CONNECT-LR are 8 50 0 .025 <_ 0 .02 800
attached at the beginning and end of the 10 50 0 .022 <_ 0 .02 800
12 50 <_ 0 .02 <_ 0 .02 800
module structure.
16 50 <_ 0 .02 <_ 0 .02 800
354 Phoenix Contact


Selective circuit-breaker, ECP

The new electronic circuit-breaker ECP

3-6 with a width of only 12.5 mm selectively
protects all 24 V DC load circuits — with a
mbination of active electronic current
N citation and proven circuit-breaker
technology including electrical isolation.
The ECP 3-6 can be plugged onto the
proven TMCP-SOCKET-M socket element
which guarantees fast and easy mounting as
well as a reduction in logistics costs.
The area of application for the ECP 3-6
extends to all aspects connected with the
power supply unit, since in the case of an
overload, power supply units reduce the
output voltage . As a consequence, the Width 12 .5
I U
connected loads would no longer be [A] [V DC]
sufficiently supplied . This means that if a Connection data 3/6 ' 18-32
` Selectable with a switch
fault occurs in one consumer of a system,
the voltage will break down in all load
circuits.
The ECP 3-6 solves this problem by
always limiting the maximum possible Type Order No.
Pcs.
Description Pkt.
current to 1 .8 times the value of the set
nominal current . Capacitive loads can thus Selective circuit-breaker, can be plugged into TMCP socket.
09 16 53 6
signaling by two-color LED, floating signal contact . on/off ECP 3-6
be switched on, loads, however, are only pushbutton
switched off in the case of an overload or Modular socket, 2-position, for holding two circuit-breakers, each
with a single position TMCP-SOCKET-M 09 16 58 9
short circuit.
An LED and integrated signal contacts Socket termination elements, pluggable both left and right.
contain the connections for querying the module TMCP-CONNECT-LR 09 16 59 2
indicate the operating and error states.
Zack marker strip, 10-section.
for labeling in the terminal center White ZB 6 (for order data, see page 397)

Dimensions
Width length [mm] 12 .5 / 60
Height (NS 35/7,51 NS 35/15) [mm] 144/151 .5
Technical data in accordance with IEC / DIN VDE
Main contact: Max . load current / cross section [A]/[mml ] 50/6//25/4
Signal contact : Max . load current / cross section [A]l[mm r] 1/1 .5
Switching capacity
Load output Power MOSFET output
Circuit diagram ECP 3-6
Overload disconnection typ . 1 .1 x I h
Switch-off time . Electrical isolation [s] typ . 5at I,>1 .1 x1 .,
Electron . disconnect [s] typ. 5 . ..0 .1 at I L >1 .8x
LINE Short circuit current I, Active current limitation . max. 1 .8 x I N
Switch-on delay [ms] typ. 300
Insulation material PA-F
Inflammability class in acc . with UL 94 Vo

LOAD

Characteristic curve ECP 3-6

Interruption point
typ. 1 .1 x I,

Short-circuit
disconnection
it typ. 100 ms
1' l - !l
0 1 2 3 4 IK 5
Min . 1 .05 x I r, Max . 1 .25 x I `
Multiples of the nominal current

Phoenix Contact 355



Thermomagnetic circuit-
breaker, TMC

The TMC circuit-breaker is available for

18 different nominal current values, with a
fast or normal blow characteristic curve and
a one, two or three-position main current Note:
path . The auxiliary contacts are available in When mounted in rows with simultaneous load, mutual thermal
interference occurs . This is equivalent to a rise in the ambient
the following variants: temperature . It depends on the nominal current, the ambient
1-pos . main current path with 1 N/O temperature, the number of devices and the distance between
devices . The nominal current of the devices can either be
contact or 1 N/C contact transmitted overdimensioned (see multiplication factor for
temperature behavior) or at only v 80%. Please inquire about the
2-pos . main current path with 1 N/O max . permissible current for the planned serial assembly.
contact and 1 N/C contact
3-pos . main current path with 1 NIO Ambient temperature 'C Multiplication factor

contact and 2 N/C contacts . -10 0 .84 TMC . ..

0 0 .92
Housing width 12 .5
+ 10 1 .00
DEC) rigid flexible I U
+ 20 1 .00 [mmz ] solid stranded AWG [A] [V AC/Dq
+30 1 .00 Main current path
Connection data 0 .2-6 0.2-4 24-10 250'65
+ 40 1 .08 Auxiliary contacts
Connection data 0.2-2.5 0 .2-1 .5 24-14 I) 250.65
+50 1 .16
* For current, see configuration example
+ 60 1 .24
SP ~

Pcs.
Description Type Order No.
Pkt.

Thermomagnetic circuit-breaker, with universal foot

for mounting on E or Lr TMC. . ..
(see type key below)
Insertion bridge, insulated, 80-pos .
EB 80-12 50 P) 3009338

Screwdriver SZS O,6 x 3,5 12 05 05 3 10

Zack marker strip, 10-section, white ZB 6 (for order data, see page 397)
Dimensions
Width / length [mm] 12 .5 / 83.5
Height (NS 35/7 .5 / NS 35/15 / NS 32) [mm] 96 / 103.5 / 100 .5
Technical data in accordance with IEC / DIN VDE
Main contact : Max . load current ! cross section 'mm2 ] [A] / [mm'] 1/6
Aux. contact : Max . load current / cross section [A] / [mm2] 1/2.5
Max. cross section with insertion bridge (solid/stranded) [mm2) 1 .5/1 .5
Rated surge voltage / contamination class [kV] I - 4/3
Surge voltage category / insulating material group -/- M /l
Switching capacity
Cycles with 1 x I N (low-induction) 6000
Cycles with 1 x I N (inductive) 3000
Cycles with 2 x I N (inductive) 500
Connection capacity of main contact
Stranded with ferrule without . with plastic sleeve [ 0 .25-4/025-2 .5
Connection capacity of auxiliary contact
Stranded with ferrule without . with plastic sleeve [mm'] 0 .25 - 2 .5 / 0 .25 - 1 .5
Main contact : Two conductors with same cross section
Solid / stranded [mm2] 0 .2-1/0 .2-1
Stranded with ferrule without plastic sleeve [mm~] 025-1
Stranded with TWIN ferrule with plastic collar [mm'] 0 .5-2 .5
1) Current, see article configuration, max . 16 A. Aux. contact : Two conductors with same cross section
'') With center infeed I N : 80 A . Solid / stranded [mm'] 0 .2 - 0 .75 / 0.2 - 0 .75
') Only version for TMCP, not possible for TMC .
Stranded with ferrule without plastic sleeve [mm['] 0 .25 - 0 .5
Stranded with TWIN ferrule with plastic collar [mm'] 0 .5 - 0 .75
TMC and TMCP type key Stripping length of main/ auxiliary contact [mm] 12 / 12
Cylindrical gauge (IEC 60 947-1) main / aux . contact A3 /Al
Main contact : Thread / torque - / [Nm] M3 / 0.6 - D .8
The type key shows the clear structure Aux. contact : Thread / torque - / [Nm] M3 10.6 - 0 .8
of the article . Insulation material PA-F
Inflammability class in ace . with UL 94 VO
Approval data (UL/CUL and CSA)
Nominal voltage / current ' conductor sizes UUCUL: [V] / [A] / AWG 250 (65) / 0.2-16 / 24 - 10 (14)
CSA: [V] / [A] r AWG 250 (65) / 0 .2-16 / 28 - 10 (14)
Type Main current paths Characteristic curve Auxiliary contact versions Nominal current 83 5

TMC 1 = single position F1 = therm . 1 .05-1 .4 IN, 100 0 single position : 1 N/O 0 .2 A 2 .5 A
or 2 = 2-position magn . 2-4 I N DC (fast blow), contact 0 .3 A 3A
TMCP 3 = 3-position only for DC applications 200 = single position : 1 N/C 0 .4 A 4A
M1= therm . 1 .05-1 .4 0. contact 0 .5 A 5A
magn . 6-12 I N AC, 120 0 2-position : 1 N/O contact, 0 .6 A 6A
7 .8-15.6 I, DC 1 N/C contact 0 .8 A 8A
(normal blow) 122 = 3-position : 1 N/O contact, 1 A 10 A
2 N/C contacts 1 .5 A 12 A
300') =1 N/O1 N/C cont. per pos . 2A 16 A

Example : One TMC with 1-pos . main current path, one N/O contact, normal blow characteristic
and a nominal current of 2 A.

TMC 1 Ml 100 2A

356 Phoenix Contact



Thermomagnetic
circuit-breaker, TMCP
Drilling diagram for front plate mounting
The TMCP thermomagnetic equipment
circuit-breaker with toggle operation and a 3-pos.

N -free mechanism is available in the

32
.flowing versions: 2-pos.
As a one or multi-position circuit-
1-pos .
breaker
For mounting on socket element or ;
- O
front plate 4I 4
As fast or normal blow version for I

-
direct current and
As normal blow version for alternating Or, 0
current. 11,5 L . TMCP. ..
Each version has integrated signal
Width 12 .5
contacts . 11 .5
I U
[A] [V AC/DC]

r Connection data
Main contact 250/65
Auxiliary contact
e Slip-on connection 6 .3 x 0 .8 mm 250/65
90°
S 1,5 mm

Py.
Description Type Order No . Pkt.

Thermomagnetic circuit-breaker,
50 pluggable, one, two or three-position TMCP.. .. 6
(see type key on the left)
43
Spring locking, for mechanical locking in the case of overhead
mounting, 1-position SPRING-LOCK 0713009 10
1
Dimensions
Width i length [ mml 12 .5 / 50
Height [mm] Max . 90
Technical data in accordance with IEC / DIN VDE
Main contact: Max . load current I cross section [mm-'] [A] / [mm-] I ) / Slip-on connection DIN 46 244
Aux . contact: Max . load current / cross section [A] / [mm'] 1 / Slip-on connection DIN 46 244
eI Rated surge voltage / contamination class [kV] /- 2.5/2
Switching capacity
Up to 5 A nominal current [AI 400
5 A nominal current and higher [A] 800
Insulation material PA-F
Inflammability class in acc. with UL 94 Vo

Approval data (UUCUL and CSA)

Nominal voltage 1 current (conductor sizes UUCUL: [V] / [A] / AWG 250(65)/0.2-16/-
GSA : [V] / [A] / AWG 250(65)/0.2-16/-
6x6,8=40,8
I ) Dependent on nominal current.

TMC and TMCP tripping

characteristics
Normal blow (Ml) : Nominal value 0 .2-6 A Normal blow (Ml) : Nominal value 8-16 A Fast blow (Fl) : Nominal value 0 .2-16 A,
only for DC applications
lower tripping limit : 1 .051 ., lower tripping limit : 1 .05 1 .,
lower tripping limit : 1 .05 I N
upper tripping limit : 1 .4 I ., upper tripping limit: 1 .4 I .;
upper tripping limit : 1 .4 I,

INIM

M WIN

0 .001 . . . . . ..

0,8 1 2 3 4 6 8 10 20 30 50 70 100

Multiples of I N Multiples of I v
Multiples of I,

Phoenix Contact 357



Socket element for ECP and

TMCP

The TMCP-SOCKET-M socket element

holds the circuit-breaker and can be
snapped onto DIN rails . The
TMCP-CONNECT-LR termination
elements each form the end of a strip of
sockets put together in a row.
The spring-cage connection and the
bridge shaft for potential distribution
facilitate wiring . Generous labeling options
facilitate the allocation of circuit breakers to
the modules.
The circuit-breakers can also be used TMCP-SOCKET-M TMCP-CONNECT-LR
without a socket element for mounting
directly on the front plate. Width per position 12 .5 Width 6
(IEC) rigid flexible I U (IEC) rigid flexible I U
[mm,] solid stranded AWG [A] [V AC/DC] [mm2] solid stranded AWG [A] [V AC/Dq.
Main contact Auxiliary contacts
Input 0 .5-6 0 .5-6 20-8 50 250/65 11 0 .25-2 .5 0 .25-2.5 24-12 10 250165
Output 0 .5-4 0 .25-4 20-10 250/65 13/14 0.25-2 .5 0 .25-2.5 24-12 1 25065
Aux. contact 12 0 .25-1 .5 0 .25-1 .5 26-16 1 250/65
The nominal current depends on the circuit-breaker used.

Description Color Type Pcs. Pcs.

Order No . Type Order No .
Pkt. Pkt.
Modular socket,
2-position . for holding two circuit-breakers. each with a single TMCP-SOCKET-M 09 16 58 9 10
position
Socket termination elements,
pluggable both left and right, contains the connections for querying TMCP-CONNECT-LR 0916592 3
a module
Signal bridge,
pluggable, for bridging group signaling when there is a free slot on TMCP SB 1A 0916602 6
the TMCP-SOCKET-M socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, for distribution of the FBST 500 TMCP I,,,, : 50 A 09 16 61 5 20
input potential in the socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, blue insulation, for FBST 500-PLC BU 32 A 29 66 69 2 20
distribution of the input potential in the socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, red insulation, for FBST 500-PLC RD t,, , : 32 A 29 66 78 6 20
distribution of the input potential in the socket
Zack marker strip, 10-section <~Y
White ZB 6 (for order data, see page 397) ZB 6 (for order data, see page 397)

Dimensions
Width / length [mm] 25 (2-position) / 115 6 / 115
Height (NS 35/7 .5 / NS 35/15) [mm] 110 .5 / 118
Technical data in accordance with IEC / DIN VDE
Rated surge voltage contamination class [kV]!– 2 .5/2 2.5 / 2
Main contact
Input: Max . load current / cross section [A] / [mm-] 50/6
Output : Max . load current / cross section [A] / [mm 2 [ 25/4
Auxiliary contact
Power input (11):
Max_ load current / cross section [A] / [mm'-] 10/2 .5
Single output (12):
Max . load current cross section [A]![mm-] 1/1 .5
Group outputs (13/14):
Max . load current ! cross section [A) / [mm] 1 /2 .5
Stripping length
Main contact [mm] 12
Auxiliary contact 12 [mm] 9
Auxiliary contact 11 : 13 : 14 [mm) 10
Insulation material PA-F PA-F
Inflammability class in acc . with UL 94 Vo VC

Dimensional drawings

115

63

358 Phoenix Contact



TCP thermal miniature

circuit-breaker

Nominal currents and internal resistances

Nominal current [A] Internal resistance (Y.)

0 .25 14
0 .5 3 .4
1 .0 0 .9
2 .0 0 .25
3 .0 0 .11
4 .0 0 .07
6 .0 0 .05
<- 0 .05
The thermal miniature circuit-breaker 8 .0
10.0 0 .05
can be switched back on again, has a
c'us
compact design, and is available in 9 finely Nominal Pcs.
graded steps for nominal currents from 0 .25 Description color current Type Order No. Pkt.
[A]
to 10 A. TCP 0 .25 0712123 20
Thermal miniature circuit-breaker, can 0 .25
The integrated switching function makes be plugged into UK 6-FSLIC use terminal 0 .5 TCP 0 .5 0712152 20
1 TCP 1 0712194 20
it possible to switch the circuit-breaker block or ST 4-FSI/C
20
2 TCP 2 07 12 21 7
back on immediately, thus guaranteeing the 3 TCP 3 07 12 23 3 20
4 TCP 4 07 12 25 9 20
availability of the system . The miniature
6 TCP 6 07 12 27 5 20
circuit-breaker can also be used for 8 TCP 8 0712291 20
TCP 10 07 12 31 4 20
switching purposes. 10
Fuse terminal block, with screw
Potential distribution can be connection, for mounting on V or u . Black UK 6-FSI/C 31 18 20 3 50
snveniently implemented using bridges. see page 82
Fuse terminal block, with spring-cage
connection . for mounting on u, see Black ST 4-FSI/C 30 36 37 2 50
page 191
Zack marker strip, flat, for labeling the
upper marker grooves White ZBF 5 (for order data, see page 401)
Time/current characteristic curve
(Total switch-off period for nominal current) Technical data in accordance with IEC / DIN VDE
Ambient temperature 23°C Nominal voltage [V AC/DC] 250 / 65
Nominal current [A] 0 .25 - 10
Ambient temperature [" Cl -20 .. .+60
Rated surge voltage / contamination class [kV] / - 2 .5/2
Surge voltage category / insulating material group -/- III/I
Switching capacity
Cycles with 1 x I 1 (low-induction) 6000
5-4A
Cycles with 1 x I,, (inductive) 3000
Cycles with 2 x I ., (inductive) 500
Switching capacity Ic,y
for nominal currents of 0 .25 - 4 A /I 6 - 10 A [A] 6xle//8xle
Switching capacity (UL 1077)
AC 250 V rr DC 65 V [A] 2000//200
Insulation material PA
Inflammability class in acc . with UL 94 VO

UK 6-FSI/C with TCP ST 4-FSI/C with TCP

64 86 .5

C
a

0,1 0,8 1 2 3 4 5 6 8 10 20 30 40

Multiples of I„

a
te:
When mounted in rows, the nominal current of the devices can only
be transmitted at 80% or must be correspondingly
overdimensioned .

Ambient temperature 1C 1 -20 -10 0

Temperature factor 0 .76 0 .84 0.92

23 40 50 60 When switched off . the maximum constructional height increases When switched off . the maximum constructional height increases
Ambient temperature 'C
by 3.5 mm . by 3.5 mm .
Temperature factor 1 1 .08 1 .16 1 .24
Phoenix Contact 359