Product Presentation StreetStar
Product Presentation StreetStar
Product Presentation StreetStar
StreetStar
Low Lumen package solution
2
StreetStar
3
Case study versus HID solutions
For applications P classes, StreetStar replaces luminaires using HID lamps below :
• High pressure sodium SON-TPP70W (for few application only) StreetStar LED35-27W
with up to 66% energy savings
If SON-TPP70W is use where normally less flux is needed to cover the lighting class (over
lighting), StreetStar LED35-27W can also replace this HID solution. Check on application
may be needed.
4
Key Features
• IP 66
• IK08
• CLI
4
StreetStar
For easy and safe installation, StreetStar comes pre-cabled with
connector.
5
Drawing
Unit in mm
8
StreetStar
Product Elements StreetStar
Configurations available 2 codes : 2400Lm / 3500Lm
Die-cast aluminum (ADC1)
Housing RAL7040 - Grey colour
Salt spray test 500 hrs
Front Plastic Cover (Tarflon LEV2200KL) UV resistant plastic cover
LED Specification 4000K CRI Min 70
System efficacy 130 Lumen per watt
Optics Multilayer DW3 optic
Rated/certificated voltage AC: 220-240V (50/60Hz) and DC: 10.5~16Vdc
Operational voltage for AC driver 170-250V (50/60Hz)
Power Factor 0.95
Lifetime 50K hours @ 70% lm maintenance Ta35 ºC
IP rating IP66
IK rating IK08
Electrical class CLI
Mounting Side Entry 40 - 60mm
Installation Power input cable (0.5m) and connector (IP66) assembly Included
Weight 1.1 Kg
Surge protection 10KV
Approbations CB, DoC (CE), Photobiological,EMC,EMF
Operating temp -40ºC < Ta< 55ºC
Wind speed Wind Force83.5N
humidity Operation humidity: 93%
Codes available at CR
Flux Color
Product type optic Housing RAL
[lum] [K]
911401663303 BRP215 LED24/NW 2400 4000 DW3 Die-cast aluminum RAL7040
18W 220-240V DW3 MP1
& (Tarflon LEV2200KL) UV
resistant plastic cover
911401663203 BRP215 LED35/NW 3500 4000 DW3 Die-cast aluminum & RAL7040
27W 220-240V DW3 MP1 (Tarflon LEV2200KL) UV
resistant plastic cover