SLICKLINE OPERATIONS: Slickline Equipment   SLICKLINE OPERATIONS: Slickline Equipment  

   

Slickline Equipment Catalogue   Slickline Equipment                                                                                                                                 .                                          Slickline Equipment Catalogue   Slickline Equipment                                                                                                                                  .  

WIRELINE UNIT    Specifications 

Containerized 79 HP Double Drum ASEP wireline
A1050561 – SlimSplit (Cabin / Winch Unit, Short Cab,  unit c/w  Operators
    spring
Cabin,   starter            
suitable   for                                                   
Ex Zone 2, aluminum) zone II ISO 9001 c/w measuring device for 0.108”
This design is a single piece wire line winch unit comprised of and 3/16” line with an in-build automatically charged
an enclosed short length operator cabin and single drum winch BOP accumulator plus control panel to well head
section. Unit can be transported as a single lift and is suitable pressure control equipment equipped with:
for onshore operations in Zone 2 hazardous areas. The basic 20,000 Ft of 0.108” Bridon Wire – API. 9A
unit consist of an aluminum frame complete with composite 20,000 ft of 3/16” Stranded line
panelling, integrated lifting pad eyes and forklift pockets 0-2000 lbs weight indicator
(H x W = 90 x 280 mm). the aluminum frame is standard not 0-5000 lbs weight indicator
painted. Only the steel part will be protected against corrosion Depth indicator (Imperial)
with a high quality ASEP / Hempel developed single colour 3 Operating temperature range: -200C to +400C
                                                   
layer 200 micron DFT offshore paint coating system as Dimensions (LxWxH): 1900x1450x2715 mm
standard. Two cabin doors give full access to the operator  Transport weight: 1040 kgs (excluding winch
compartment. The operator is sealed behind a glass window drums)  ASEP SLICKLINE UNIT
while operating the control panel.    
                                                                                                                       
The setup is suitable for cased hole slickline (up to 0.140”),  
braided line (up to ¼”) and monoconductor (up to ¼”)
 
operations. The unit is standard equipped with a hoisting bar
including manuel Hoist to exchage the winch drums.  
A set of standard decals and ID plates, a small section of  
spare parts, a digital operation / maitenance manual / data
book translated into cuastomer’s languag plus two days on-  
shore training and commisioning ex-works. The the
Netherlands are part of the delivery.  

The unit complies with the following standards, directives and  

regulations:
 
98/37/EC Machinery Directive
97/23/EC Pressure Equipment Directive  
  89/336/EC
  Electromagnetic
    Compatibility
  Directive.
                                               
   
  POWER PACK & WINCH
 
 
 
 
 
   
 
 
 
www.oiltestgroup.com www.oiltestgroup.com