Scribd
Upload
1K views6 pages

Integration Baseband 5212 5216 Ericsson Manual Method

This document provides instructions for integrating configuration files to an Ericsson Baseband 5212/5216 using a web browser and Moshell software. It involves connecting a laptop to the baseband, downloading software and script files, running an integration process through the web GUI, and optionally running transport and radio network scripts using Netconf commands. The process takes approximately 15 minutes and will restart the baseband. Errors can be checked on the emergency access page.

Uploaded by

Bhupinder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views6 pages

Integration Baseband 5212 5216 Ericsson Manual Method

This document provides instructions for integrating configuration files to an Ericsson Baseband 5212/5216 using a web browser and Moshell software. It involves connecting a laptop to the baseband, downloading software and script files, running an integration process through the web GUI, and optionally running transport and radio network scripts using Netconf commands. The process takes approximately 15 minutes and will restart the baseband. Errors can be checked on the emergency access page.

Uploaded by

Bhupinder Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Integration Baseband 5212 / 5216 Ericsson Manual

Method

Integration Baseband 52xx Ericsson Manual Method

Tools

1. Web Browser (recommended use Firefox or Chrome)


2. Latest Moshell or minimum Moshell 17.0c ( Moshell 17.0e )
3. RJ-45 LAN cable straight
4. SFTP aplication ( Download Here )
5. Software 17A SW R5E74 ( Download Here ) 706 MB

Baseband Configuration Files

1. RBS Summary Script


2. Site Basic Script
3. Site Equipment Script
4. Transport Network Script
5. Radio Network Script

You can download here

1. Power Up Baseband 521x


Connect Laptop to port LMT Baseband using RJ45 cable straight
IP Laptop Setting 169.254.2.1
Firewall and antivirus should be disabled in the local PC

Setting SFTP Server


- IpAddress Baseband : 169.254.2.1
- User : ftp
- Password : ftp
- Root path : Directory to Software 17A SW R5E74 and script folder

2. Open IE/Chrome/Firefox
Log in to AutoIntegration Web GUI :

https://169.254.2.2

- Host : 169.254.2.1 (IP Laptop)


- Username : ftp
- Password: ftp
- Site Installation File: /<RBS_Summary>.xml

3. Press button ‘Download Files’ until download complete.

Proses download will appear in AutoIntegration log


After download files complete, press button “Integrate” for starting integration. Baseband will
restart before integration, process started (estimation 15 minutes).
Make sure transmission cable already connect to TRM Equipment (mandatory)

After Auto Integration complete, in AutoIntegration Web


GUI will appear “Welcome to RBS”.

Open Moshell, log in to RBS using default IP 169.254.2.2.

If Integration process failed/error, Baseband will automatically restore to factory setting.


Details error check in Emergency Access https://169.254.2.2/ea.html

4. Running Transport Network & Radio Network script via Netconf with command
below.
!ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p
<port_netconfssh> [email protected] -s netconf < filename.xml

Example :
!ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p
830 [email protected] -s netconf < /home/enurnug/BB5212/Test/Transport_Local.xml

Another command maybe usefull

› Chek mac address router: mcc Router=vr_Traffic3G show arp-cache


› Ping test: mcc Router=Traffic ping 10.211.38.86 --count 2 --packetsize 1000
› Make CV: acc BrmBackupManager createBackup or cvmk <backup name>
› Delete CV: acc BrmBackupManager deleteBackup or cvrm <backup name>
› Cvset & node restart on startable CV: acc BrmBackup=XX restore or cvre <backup name>
› Restart Node: acc FieldReplaceableUnit=1 restartUnit

You might also like