Fluke 27 II and 28 II:

Rugged IP 67 Industrial Multimeters

Technical Data

The NEW Fluke 27 II and 28 II digital multimeters define a new stan-

dard for operating in harsh conditions with the features and accuracy to
troubleshoot most electrical problems. Both meters have IP 67 (water-
proof and dustproof) rating, MSHA approvals (pending), extended
operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C
for up to 20 minutes) and 95 % humidity, and have been designed and
tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series
Multimeters are built to work in the toughest environments.

• Measure up to 1000 V ac • Hi resolution 20,000 count

and dc display mode (28 II)
• Measure up to 10 A (20 A for • True-rms ac voltage and
30 seconds) current for accurate measure-
• 10,000 µF capacitance range ments on non linear signals
• Frequency to 200 kHz (28 II)
• Extended ac voltage band- • Average responding voltage
width–15 Hz to 20 kHz (28 II), and current for measurements
40 Hz to 30 kHz (27 II) (27 II)
• Built in thermometer conve- • New – Backlit keypad buttons
niently allows you to take allow for easy visibility in low-
temperature readings without lit areas
having to carry a separate • Large display digits and 2
instrument (28 II) level bright white backlight for
• Resistance, continuity and increased visibility
diode test • Reversible holster for added
• Min/Max and average record- protection when not in use
ing to capture variations • Withstands hazardous 8,000
automatically volt spikes caused by load
• Peak min-max (28 II) switching and faults on indus-
trial circuits and complies with
• Unique function for accurate second edition IEC and ANSI
voltage and frequency mea- electrical safety standards
surements on adjustable speed
motor drives and other electri- • Long battery life (800 hours)
cally noisy equipment (28 II) • Relative mode to remove test
lead resistance from low ohms
Features measurements
• Auto and manual ranging for
• New – IP 67 waterproof & maximum flexibility
dustproof protection, com-
pletely sealed for use in harsh • Optional magnetic hanger for
environments easy setup and viewing while
freeing your hands for other
• Designed to withstand 3 meter tasks
drop (with holster)
• MSHA approval (pending)
Accuracy specifications
Specification 27 II 28 II
Max. resolution 0.1 mV to 1000 V Ordering information
DC voltage
Accuracy 0.1 % +1 0.05 % + 1 27 II Fluke 27 II Rugged IP 67
Max. resolution 0.1 mV to 1000 V Avg. Responding Multimeter
AC voltage 28 II Fluke 28 II Rugged IP 67
Accuracy 0.5 % +3 0.7 % +4
True-rms Multimeter
Max. resolution 0.1 µA to 10 A
DC current Includes: Holster, test leads, alligator
Accuracy 0.2 % + 4 0.2 % + 4
clips, 80BK-A temperature probe
Max. resolution 0.1 µA to 10 A (28 II), manual, CD-ROM, and three AA
AC current batteries (installed)
Accuracy 1.5 % + 2 1.0 % + 2
Resistance Max. resolution 0.1 to 50 M Optional accessories
Display counts 6000 6000/19,999 PV 350 Pressure Vacuum Module
i200 AC Current Clamp
Capacitance 1 nF to 9999 µF
i410 AC/DC Current Clamp
Frequency 0.5Hz Hz to 199.99 kHz 80K-6 High Voltage Probe
Temperature — -200 °C to +1090 °C
Low pass filter
— Yes
(Measurement on VSD’s)
Compliance CAT IV 600 V , CAT III 1000V
IP rating IP 67 IP 67
Power Three AA batteries
Battery life 800 hours

General specifications
Display
Bar graph/backlight Yes/Yes
Data storage
Peak transient capture 250 µS (28 II)
Min/Max/Avg Yes
Reading hold Yes
Other features
Relative readings (zero) Yes
Battery type Three AA batteries
Warranty and protection
Fluke. Keeping your world
Safety rating CAT IV 600 V/CAT III 1000 V up and running.®
External protection Rubber holster
Drop test 10 feet drop test Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Dustproof/waterproof Yes, IP 67 rated
Fluke Europe B.V.
Warranty Limited lifetime PO Box 1186, 5602 BD
Eindhoven, The Netherlands
6.35 cm x 10.0 cm x 19.81 cm
Size (HxWxL) with holster For more information call:
(2.5 in x 3.93 in x 7.8 in)
In the U.S.A. (800) 443-5853 or
Weight with holster 698.5 g (1.54 lb) Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2009 Fluke Corporation.
Specifications subject to change without notice.
Pub id. 11573-eng

Modification of this document is not permitted

without written permission from Fluke Corporation.

2 Fluke Corporation Fluke 27 II & 28 II: Rugged IP 67 Industrial Multimeters