Scribd
Upload
196 views1 page

Sponsored by Ccps Supporters: Fire Protection - Long-Bolt Flangeless Valves

pernos largos protección

Uploaded by

marcelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
196 views1 page

Sponsored by Ccps Supporters: Fire Protection - Long-Bolt Flangeless Valves

pernos largos protección

Uploaded by

marcelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sponsored by

CCPS
Supporters
Messages for Manufacturing Personnel
http://www.aiche.org/CCPS/Publications/Beacon/index.aspx April 2010

Fire Protection — Long-Bolt Flangeless Valves

W ould you recognize the metal cover (yellow arrow) in Picture 1 as an important piece of safety equipment? If it
was damaged or missing, would you know to report it so that it could be repaired or replaced?
The metal cover wraps something called a “long-bolt flangeless valve” (also called long bolt, sandwich, flangeless,
or wafer valve). Some examples, with the covers removed, are circled in red in Pictures 2 and 3. These valves have no
integral flanges for bolting to pipe or vessel flanges, and have exposed bolts longer than 3 in. (about 7 cm). If there is a
fire in the area, the long bolts may be contacted directly by flames (impingement). The heat causes the bolts to expand
and lengthen, allowing the gaskets on the two sides of the valve to leak. If the leaking material is flammable or combus-
tible, it will add fuel to the fire (Picture 4). If the pipe is under pressure, a large, spraying fire that results in more damage
can occur.
The metal cover wraps the long bolts with a fire-resistant material and encloses the entire assembly with a stainless
steel covering to protect it from flame and heat impingement. It is an important safety device and it must be properly
reinstalled if removed for maintenance. It must also be inspected periodically to ensure it is in good condition, and any
damage must be reported so it can be repaired.

What Can You Do?


• If you have long-bolt flangeless valves on piping in combusti-
ble, flammable or liquefied petroleum gas (LPG) service, make
sure the covers are properly maintained at all times.
• A cover on a long-bolt flangeless valve can hide corrosion or
other damage. The covers should be removed periodically to
inspect the flanges and valves under the cover, and immediately
replaced following the inspection.
• Passive fire protection on such a valve will only be rated for
a short-duration fire. An inherently safer engineered solution
would be to replace the flangeless valve with a fully flanged
valve.

Understand your Safety Equipment!

AIChE © 2010. All rights reserved. Reproduction for non-commercial, educational purposes is encouraged. However, reproduction for the purpose of
resale by anyone other than CCPS is strictly prohibited. Contact us at [email protected] or 646-495-1372.

The Beacon is usually available in Afrikaans, Arabic, Chinese, Danish, Dutch, English, French, German, Greek, Gujarati, Hebrew, Hindi, Hungarian, Indo­­nesian,
Italian, Japanese, Korean, Malay, Marathi, Norwegian, Persian, Polish, Portuguese, Russian, Spanish, Swedish, Tamil, Telugu, Thai, Turkish, Urdu and Vietnamese.
Circle 103 on p. 63 for a free electronic subscription to the Beacon.

24  www.aiche.org/cep  April 2010  CEP

You might also like