Scribd
Upload
346 views9 pages

p643 Test Tool

1. The document provides settings and test point data for calculating operation current in bias differential relays. 2. It lists 5 test points with corresponding bias current, differential current, and currents for the low voltage and high voltage sides. 3. It also provides notes about disabling filtering and how filtering affects slope test results.

Uploaded by

Neelakandan Masilamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
346 views9 pages

p643 Test Tool

1. The document provides settings and test point data for calculating operation current in bias differential relays. 2. It lists 5 test points with corresponding bias current, differential current, and currents for the low voltage and high voltage sides. 3. It also provides notes about disabling filtering and how filtering affects slope test results.

Uploaded by

Neelakandan Masilamani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 9

Calculating the operation current in Bias Differential Relays

(Settings will be transfer from characteristic sheet, update test point with entering
desired "I bias")

Id> IR2 m1 m2 I ref Kamp LV


Settings
0.25 1.5 0.30 0.80 1 1.143

Points on the Curve Expected currents Notes:


TEST POINT I bias I diff. I LV I HV 1. Must disable the Filtering - Zero seq
1 0 0.250 0.219 0.078 2. If Filtering is set, the slope test resul
2 1 0.513 1.099 0.233 3. This applies when using single curre
3 2 1.063 2.214 0.461
4 3 1.863 3.439 0.649
5 4 2.663 4.664 0.837

REF test for SUM(I)

IdG> Kamp ph Kamp Y


Settings
0.25 3.187 1.143

TEST POINT I R(single ph.)


1 0 1.09
2 1 1.10
3 2 1.10
4 3 1.11
5 4 1.11
point with entering

Kamp HV
3.187

1. Must disable the Filtering - Zero sequence Filtering


2. If Filtering is set, the slope test results will be different from expected.
3. This applies when using single current source testing he slope charactristics
W in d in g a W in d in g b

Inom,CT,a: Vnom,a: Sref: Vnom,b: Inom,CT,b:

800 A 230.0 kV 100.0 MVA 110.0 kV 600

Inom,a: Iref,a: Vector group ID: Iref,b: Inom,b:

1 A 251.0 A 0 524.9 A 1 A

kamp,a: I0,a filtering: I0,b filtering: kamp,b:

3.187 without without 1.143

IA,a: P633/P634 IA,b:

0.196 A IR,1: Id,1,trip at IR,1: Id,1: 0.328 A


0 ° 180 °
0.500 0.362 0.250
IL2,a: IL2,b:
IR,2: Id,2,trip at IR,2: Id,2:
0 A 0 A
0 ° 0.000 0.250 0.000 0 °

IC,a: IR,3: Id,3,trip at IR,3: Id,3: IC,b:

0 A 0.000 0.250 0.000 0 A


0 ° 0 °
Measuring System 1: Measuring System 2: Measuring System 3: Scaling:

NO TRIP NO TRIP NO TRIP

Id / Iref

15
2

0
0 1 2 3 4 5
Tripping Characteristic Measuring System 1
Measuring System 2 Measuring System 3
IR / Iref

Id>: m1: IR,m2: m2:

0.25 0.30 1.5 0.80


IA,a: 0.196
0
IB,a: 0
0
IC,a: 0
0
Izero,a: 0.0653333333
0

IA,b: -0.328
4.016842E-17
IB,b: 0
0
IC,b: 0
0
Izero,b: -0.1093333333
1.338947E-17

Iamp,A,a: 0.6246468032
0
Iamp,B,a: 0
0
Iamp,C,a: 0
0
Iamp,zero,a: 0.2082156011
0

Iamp,A,b: -0.3749543588
4.591867E-17
Iamp,B,b: 0
0
Iamp,C,b: 0
0
Iamp,zero,b: -0.1249847863
1.530622E-17

Itable,1,a: 0.6246468032
0
Itable,2,a: 0
0
Itable,3,a: 0
0

Itable,1,b: -0.3749543588 -0.34146479 0 -0.124984786 0 0.0914952137


4.591867E-17 4.18174E-17 0 1.530622E-17 0 -1.120493E-17
Itable,2,b: 0 -0.12498479 0 -0.341464786 -0.37495436 -0.3414647863
0 1.53062E-17 0 4.181738E-17 4.59187E-17 4.181738E-17
Itable,3,b: 0 0.091495214 0.374954359 0.0914952137 0 -0.1249847863
0 -1.1205E-17 -4.5919E-17 -1.12049E-17 0 1.530622E-17

Ivec,1,a: 0.6246468032
0
Ivec,2,a: 0
0
Ivec,3,a: 0
0

Ivec,1,b: -0.3749543588
4.591867E-17
Ivec,2,b: 0
0
Ivec,3,b: 0
0

Id,1: 0.2496924444
Id,2: 0
Id,3: 0

IR,1: 0.499800581 0.499800581 0.499800581


IR,2: 0 0 0
IR,3: 0 0 0

Id>: 0.25 25
m1: 0.3 30
IR,m2: 1.5 15
m2: 0.8 80

Id,0: 0.25
Id,m1: 0.25
Id,m2: 0.6625
Id,liwith: 23.4625

IR,0: 0
IR,m1: 0.83
IR,m2: 1.5
IR,liwith: 30
Id,1,trip: 0.3624
Id,2,trip: 0.2500
Id,3,trip: 0.2500

Scaling: 15
0.374954359 0.0914952137 0 -0.1249847863 0 -0.341464786
-4.5919E-17 -1.12049E-17 0 1.530622E-17 0 4.181738E-17
0 -0.124984786 0 0.0914952137 0.374954359 0.0914952137
0 1.530622E-17 0 -1.120493E-17 -4.5919E-17 -1.12049E-17
0 -0.341464786 -0.37495436 -0.3414647863 0 -0.124984786
0 4.181738E-17 4.59187E-17 4.181738E-17 0 1.530622E-17

You might also like