Dell Storage Integration Tools for VMware

Version 4.1
Administrator’s Guide
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.

2017- 02

Rev. A
Contents
Preface.............................................................................................................................. 4
Revision History..................................................................................................................................................................4
Audience.............................................................................................................................................................................4
Related Publications........................................................................................................................................................... 4
Contacting Dell................................................................................................................................................................... 4

1 Installing DSITV............................................................................................................... 5
Installation Requirements....................................................................................................................................................5
Deploying DSITV.................................................................................................................................................................5
Setting Up DSITV............................................................................................................................................................... 6
Configuring the Time on the DSITV Virtual Appliance...................................................................................................6
Logging In to DSITV......................................................................................................................................................7
Configuring DSITV Settings.......................................................................................................................................... 7
Updating DSITV..................................................................................................................................................................8
Display the Current Version of DSITV........................................................................................................................... 8
Check for Updates to DSITV........................................................................................................................................ 9
Install an Update to DSITV............................................................................................................................................9
Updating DSITV at a Dark Site.................................................................................................................................... 10
Rebooting DSITV.............................................................................................................................................................. 10

2 Replay Manager Service for VMware............................................................................. 12

RMSV Data Migration....................................................................................................................................................... 12
Configuring RMSV............................................................................................................................................................ 12

3 Dell Storage vSphere Web Client Plugin.........................................................................14

Installing the Dell Storage vSphere Web Client Plugin....................................................................................................... 14
Register the vSphere Web Client Plugin After an Upgrade Installation.............................................................................. 14
Removing the vSphere Web Client Plugin......................................................................................................................... 14
A DSITV Application Troubleshooting................................................................................16
Troubleshooting RMSV..................................................................................................................................................... 16
Restart RMSV.............................................................................................................................................................16
Save RMSV Log Files.................................................................................................................................................. 16
Troubleshooting the vSphere Web Client Plugin................................................................................................................ 17
Dell Storage Icon Is Missing......................................................................................................................................... 17
Plugin Summary and Monitor Page Appears Disabled..................................................................................................17
Snapshot and Snapshot Schedule Creation Fails......................................................................................................... 17
Cannot Enable Live Volume to Failover Automatically..................................................................................................17
Failure When Creating NFS Datastores....................................................................................................................... 17
Managing an NFS Datastore Created Outside the Plugin............................................................................................ 17
View vSphere Web Client Log Files............................................................................................................................. 18
Registration Failure Related to TLS............................................................................................................................. 18

3
Preface
This guide provides instructions for installing the Dell Storage Integration Tools for VMware (DSITV) and configuring the following
applications:

• Dell Replay Manager Service for VMware (RMSV)

• Dell Storage vSphere Web Client Plugin

Revision History
Document Number: 680-131-001

Revision Date Description

A February 2017 DSITV version 4.1 general availability release

Audience
The intended audience of this guide is information technology professionals who have intermediate to expert knowledge of Dell
Storage Centers, Dell Storage Manager, and Replay Manager. This guide assumes administrative working knowledge of the VMware
vSphere Client, VMware vCenter, and VMware ESXi.

NOTE: Throughout this document, Dell Storage Manager (2016 and later) and Enterprise Manager (2015 and earlier) are
synonymous.

Related Publications
The following documentation is available for client applications that are used with Dell storage products.

• Dell Storage SC Series Best Practices with VMware vSphere 5.x–6.x

Provides configuration examples, tips, recommended settings, and other storage guidelines a user can follow while integrating
VMware vSphere with a Storage Center. This document answers many frequently asked questions about how VMware interacts
with Storage Center features, such as Dynamic Capacity, Data Progression, and Data Reduction.
• Dell Storage vSphere Web Client Plugin Administrator’s Guide
Describes how to use the vSphere Web Client Plugin to manage a Storage Center with the VMware vSphere Web Client.
• Dell Storage Manager Administrator’s Guide
Provides configuration and management instructions for Dell Storage Manager. Dell Storage Manager provides enterprise-level
management of multiple Storage Centers, including setting up and monitoring replications and disaster recovery (DR) sites. In
addition, it provides various system-provided performance reports, and the ability to create custom reports.
• Replay Manager Administrator’s Guide
Describes how to install Replay Manager and how to use the software to back up and restore data on a server.

Contacting Dell
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some
services might not be available in your area. To contact Dell for sales, technical support, or customer service issues, go to dell.com/
support.

4 Preface
 1
Installing DSITV
DSITV allows integration of the Replay Manager Service for VMware and vSphere Web Client Plugin with VMware vSphere.

• Dell Replay Manager Service for VMware (RMSV) enables consistent snapshots of VMware virtual machines and datastores. To
configure Dell Replay Manager Service for VMware, see Configuring RMSV.
• Dell Storage vSphere Web Client Plugin is a plugin for VMware vCenter that provides storage administrators the ability to
manage Dell storage with the VMware vSphere Client. To install the Dell Storage vSphere Web Client Plugin on a VMware
vCenter Server, see Installing the Dell Storage vSphere Web Client Plugin.

Installation Requirements
The Dell Storage Integration Tools for VMware Release Notes list the minimum hardware and software requirements for DSITV
installation.

For information about installing and configuring VMware software, see:

www.vmware.com/support

Deploying DSITV
The DSITV virtual appliance is delivered as an OVA (Open Virtual Appliance) file. The OVA file is named DSITV-04.01.00.nnn.ova and
is deployed to a VMware vCenter Server using the Deploy OVF Template wizard.
Steps
1. Start the vSphere Client and connect to the VMware vCenter Server.
2. In the vSphere Client, select VMs and Templates.
3. Select Actions → Deploy OVF Template.
The Deploy OVF Template wizard opens.
4. Specify the location of the DSITV-04.01.00.nnn.ova file in the Deploy from a file or URL field.
5. Click Next.
The OVF Template Details page opens.
6. Click Next.
The End User License Agreement page opens.
7. Read the license agreement and click Accept.
8. Click Next.
The Name and Location page opens.
9. Specify the name and location of the virtual appliance.
• (Optional) Change the name of the virtual appliance in the Name field. The default name of the virtual appliance is Dell
Storage Integration Tools for VMware.
• (Optional) Select a folder in the Inventory Location pane to which to deploy the virtual appliance.
10. Click Next.
The Host/Cluster page opens.
11. Select the host or cluster on which to deploy the virtual appliance.
If a cluster is selected, click Next and select the host within the cluster on which to deploy the virtual appliance.

Installing DSITV 5
12. Click Next.
The Storage page opens.
13. Select the destination storage for the DSITV virtual machine files.
14. Click Next.
The Disk Format page opens.
15. Select the format for the virtual disks.
16. Click Next.
• If network mapping is required, map the source network to a destination network on the Network Mappings page and click
Next. The Ready to Complete page opens and displays the deployment settings of the virtual appliance.
• If network mapping is not required, the Ready to Complete page opens and displays the deployment settings of the virtual
appliance.
17. Click Finish.
A dialog box opens to show the progress of the deployment.
18. Click Close when the Completed Successfully message is displayed.

Next steps
Assign a daily Replay Profile to the Storage Center volume on which DSITV is being deployed to allow the DSITV virtual appliance to
be recovered.

Setting Up DSITV
After deploying DSITV, configure the time on the DSITV virtual appliance and then log on to the virtual appliance to configure the
time zone and network settings.

• Configuring the Time on the DSITV Virtual Appliance

• Logging In to DSITV
• Configuring DSITV Settings

Configuring the Time on the DSITV Virtual Appliance

Make sure the time on the ESXi host is correct and then configure the DSITV virtual appliance to synchronize its time with the ESXi
host.

1. Start the vSphere Client and connect to the VMware vCenter Server.
2. Select View → Inventory → Hosts and Cluster.
The Hosts and Clusters view opens.
3. Select the ESXi host and click the Configuration tab.
4. Click Time Configuration.
The Time Configuration page opens.
5. Click Properties.
The Time Configuration dialog box opens.
6. If the time or date is incorrect, type the correct time or date in the appropriate field.
7. Click OK.
8. Select View → Inventory → VMs and Templates.
The Virtual Machines & Templates view opens.
9. Right-click the DSITV virtual appliance and select Edit Settings.
The Virtual Machine Properties dialog box opens.
10. Click the Options tab and select the VMware Tools option.
11. Make sure the Synchronize guest time with host checkbox is selected.
12. Click OK.

6 Installing DSITV
Logging In to DSITV
Use the vSphere Client to log in to DSITV.

1. Start the vSphere Client and connect to the VMware vCenter Server.
2. Select View → Inventory → View → VMs and Templates.
The Virtual Machines & Templates view opens.
3. Right-click the DSITV virtual appliance and select Open Console.
4. If the virtual appliance is not running, select VM → Power → Power On.
5. When the login prompt appears, type the DSITV login credentials.
After you log in, the CLI menu is displayed:
################################################################
# Welcome to Dell Storage Integration Tools for VMware #
# Version - 4.x.x.x #
################################################################
Item Status
---------------------------------------------------- ------
1. Set the time zone (Current: UTC) .................... Unset
2. Configure network (eth0) ............................ Unset
3. Configure RMSV ...................................... Unset
4. Register vSphere Web Client Plugin with vCenter
5. Unregister vSphere Web Client Plugin with vCenter
11. Restart Replay Manager for VMware (RMSV)
12. Reboot appliance
13. Change root password
14. Customer support
15. Update appliance
16. Logout
Enter selection [1 - 16]:

a. Type root at the login prompt and press Enter.

b. Type Fluid (case sensitive) at the password prompt and press Enter.
After logging in, the DSITV command-line interface (CLI) prompt is displayed.

Configuring DSITV Settings

After logging in to DSITV for the first time, configure the time zone and network settings. In addition, Dell recommends changing the
root password of DSITV now.

Configure the Time Zone of DSITV

1. Log in to DSITV.
2. At the CLI prompt, type 1 and press Enter.
3. Specify the time zone using a geographical location.
4. When the correct time zone is displayed, type 1 and press Enter to save the changes.
5. When the time zone is set, press Enter to return to the main menu.

Related links
Logging In to DSITV

Configure the Network Settings of DSITV

1. Log in to DSITV.
2. At the CLI prompt, type 2 and press Enter.
3. Type the host name of DSITV and press Enter.
4. Type the IP address of DSITV for the management network and press Enter.

Installing DSITV 7
5. Type the network mask for the management network and press Enter.
6. Type the gateway IP address for the management network and press Enter.
7. Type the IP address of the DNS server for the management network and press Enter.
8. To specify a second DNS server, type the IP address of the DNS server for the management network and press Enter.
Otherwise, press Enter to skip this step.
9. When the values that you entered in the previous steps are displayed on the screen, type y and press Enter to save the
changes.
10. When the network settings are configured, press Enter to return to the main menu.

Related links
Logging In to DSITV

(Optional) Change the Root Password of DSITV

1. Log in to DSITV.
2. At the CLI prompt, type 13 and press Enter.
3. Type the new root password and press Enter.
4. Type the new root password again and press Enter.
5. When the root password is changed, press Enter to return to the main menu.

Related links
Logging In to DSITV

Updating DSITV
When an updated version of the DSITV virtual appliance becomes available, it can be installed from the virtual appliance. If DSITV is
installed at a dark site, see Updating DSITV at a Dark Site.

Display the Current Version of DSITV

1. Log in to DSITV.
2. At the CLI prompt, type 15 and press Enter. The following options are displayed:
-------------------------------------------
1. Appliance version
2. Check for updates
3. Install update
4. Return to main menu
Enter selection [1 - 4]:
3. Type 1 and press Enter. The current version of the virtual appliance is displayed.
Version - 04.xx.xx.xxx
Description - Updates to the Dell Storage Integration
Tools for VMware appliance
press [enter] to continue...
4. Press Enter to return to the virtual appliance update menu.

Related links
Logging on to DSITV

8 Installing DSITV
Check for Updates to DSITV
1. Log in to DSITV.
2. At the CLI prompt, type 15 and press Enter. The following options are displayed:
-------------------------------------------
1. Appliance version
2. Check for updates
3. Install update
4. Return to main menu
Enter selection [1 - 4]:
3. Type 2 and press Enter.
• If an update is not found, the following message is displayed:
No available updates found
• If an update is found, the version number of the update is displayed.
4. Press Enter to return to the virtual appliance update menu.

Related links
Logging on to DSITV

Install an Update to DSITV

Prerequisites
CAUTION: Before updating DSITV, make sure that no scheduled backups or restore operations are in progress.

Steps
1. Log in to DSITV.
2. At the CLI prompt, type 15 and press Enter. The following options are displayed:
-------------------------------------------
1. Appliance version
2. Check for updates
3. Install update
4. Return to main menu
Enter selection [1 - 4]:
3. Type 3 and press Enter.
• If an update is not found, the following message is displayed:
No available updates found
• If an update is found, the version number of the update is displayed and the update is installed.
4. Press Enter to return to the virtual appliance update menu.
5. Type 16 and press Enter to log out of DSITV.
6. When the login prompt appears, log back in to DSITV.

Next steps

1. Reboot the DSITV appliance after installing the update. On some occasions, the version number is not refreshed immediately
after an update. This action also updates the version number.
2. After rebooting the DSITV appliance, unregister and reregister the vSphere Web Client Plugin from the DSITV appliance’s CLI
menu. This action removes the old plugin and registers the new plugin to vCenter.
3. When Replay Manager Explorer is installed on a server with the Replay Manager Service, restart the Replay Manger Service
after the DSITV update completes.

Related links
Logging In to DSITV
Rebooting DSITV

Installing DSITV 9
Updating DSITV at a Dark Site
When DSITV is installed at a site without Internet access, updates to DSITV must be obtained from Dell Technical Support. The
updates can then be made available using an internal web server or they can be copied directly to the virtual appliance.

Copy Updates to a Web Server

1. Contact Dell Technical Support to obtain the latest DSITVUpdate.zip file.
2. Extract the contents of theDSITVUpdate.zip file to a folder named dsitvupdate in the root directory of the web server.
For example, if the root directory of the web server is C:\inetpub\wwwroot, extract the contents of the zip file to C:\inetpub
\wwwroot\dsitvupdate.
3. Verify access to the updates by using a web browser to go to http://web_server_address/dsitvupdate/manifest/manifest-
latest.xml.
4. Log in to DSITV.
5. Type 99 and press Enter to access the interactive shell.
6. Open the /etc/hosts file.
7. Add the following entry at the end of the hosts file:
citv.compellent.com[IP_address_of_web_server]
8. Save changes to the hosts file and type exit to return to the CLI.
9. Install the updates as described in Updating DSITV.

Related links
Logging In to DSTV

Copy Updates to the Virtual Appliance

1. Contact Dell Technical Support to obtain the latest DSITVUpdate.zip file.
2. Using a computer with Internet access, download an unzip tool for CentOS release 6.7, which is the operating system of the
virtual appliance.
3. Use Secure Copy (SCP) to copy the DSITVUpdate.zip file and unzip the RPM file from a local computer to the virtual appliance.
4. Log in to DSITV.
5. Type 99 and press Enter to access the interactive shell.
6. Install the unzip tool:
rpm -ivh [unzip_package_name].rpm
7. Create a directory named DSITVUpdate.zip in the root directory:
mkdir dsitvupdate
8. Extract the update files to the DSITVUpdate.zip directory:
unzip DSITVUpdate.zip -d dsitvupdate
9. Open the /opt/vmware/var/lib/vami/update/provider/provider-deploy.xml file.
10. Find the string http://citv.compellent.com/ and change it to file://root/dsitvupdate.
11. Save changes to the provider-deploy.xml file and type exit to return to the CLI.
12. Install the updates as described in Updating DSITV.

Related links
Logging In to DSTV

Rebooting DSITV
Prerequisites
CAUTION: Before rebooting DSITV, make sure no scheduled backups or restore operations are in progress.

10 Installing DSITV
Steps
1. Log in to DSITV.
2. At the CLI prompt, type 12 and press Enter.
3. Type y and press Enter. The following messages are displayed:
Broadcast message from root...
The system is going down for reboot NOW!
4. When the login prompt appears, log back in to DSITV.

Related links
Logging In to DSITV

Installing DSITV 11
 2
Replay Manager Service for VMware
Replay Manager Service for VMware (RMSV) enables Replay Manger to communicate with VMware vCenter and create consistent
Replays of VMware virtual machines and datastores on a Dell Storage Center.

RMSV Data Migration

The 4.0 release of CITV (the previous name of the product now called DSITV) introduced a major update to the base operating
system and required a side-by-side update from the CITV 3.1 virtual appliance to a CITV 4.0 virtual appliance. DSITV uses the same
base operating system as CITV 4.0. The base operating system is not affected when upgrading from CITV 4.0 to DSITV 4.1The same
base operating system used in CITV 4.0 is used by DSITV 4.1. However, upgrading from CITV 3.1 to DSITV 4.1 does involve a
migration of RMSV data.
You can choose to migrate the RMSV data created in CITV 3.1 to DSITV 4.1 during the RMSV configuration process (see Configuring
RMSV). DSITV prompts you to migrate data unless one of the following conditions is met:

• You have already migrated data from CITV 3.1 to DSITV 4.1.
• You chose to configure DSITV 4.1 without migrating the earlier data.

After you configure RMSV, the data migration option is no longer displayed and you can no longer migrate data from the earlier
release.

NOTE: Each restore point increases the time it takes for the data migration to finish.

After migration, the following data becomes accessible to DSITV 4.1:

• List of defined Storage Centers

• Email service settings and snapshot notifications email
• License status and serial number information
• Jobs schedule
• Backup sets and restore point status reports
• Related virtual machine and datastore backup data

NOTE: If you are running DSITV earlier than version 3.1 (called CITV), you must first upgrade to CITV 3.1, using the
upgrade option available in the earlier version. Then, you can migrate the data from CITV 3.1 to DSITV 4.1 as indicated.

Configuring RMSV
To allow Replay Manager to communicate with VMware vCenter, RMSV must be configured with information about the VMware
vCenter Server.
Prerequisites
CAUTION: Errors might occur on the VMware ESXi host if multiple instances of RMSV, on multiple DSITV virtual
appliances, are configured to communicate with a single VMware vCenter Server. Each instance of RMSV must be
configured to communicate with a different VMware vCenter Server.
• Deploy DSITV and configure the time zone and network settings.
• Identify the host name or IP address of the VMware vCenter Server.
• Identify the user name and password of a VMware vCenter user with administrator privileges.

12 Replay Manager Service for VMware

• Decide whether you want to migrate RMSV data from CITV 3.1. For more information, see RMSV Data Migration

Steps
1. Log in to DSITV.
2. At the CLI prompt, type 3 (Install Update) and press Enter.
If you are upgrading from CITV 3.1, DSITV begins the RMSV configuration process and asks if you want to migrate data from an
existing CITV 3.1 appliance. If you have an existing CITV 3.1 appliance with data that you would like to migrate, continue with
step 3. If prompted to migrate data, continue with step 4.
3. To begin the data migration, type y when prompted and continue with the following steps:
NOTE: If you have already configured RMSV or migrated from a CITV 3.1 appliance, the migration option is not
available.

a. Enter the IP address or host name of the CITV appliance from which you migrate the data.
DSITV authenticates the host and asks if you want to continue connecting.
b. Type yes when asked to confirm that you want to continue connecting.
DSITV adds the host to the list of known hosts, stops the Replay Manager on that host, and begins copying the RMSV data
files.
c. After the files are migrated, DSITV disables the Replay Manager on that host, restarts Replay Manager, and indicates that
the data migration has completed. Continue with step 4.
4. Type the host name or IP address of the VMware vCenter Server and press Enter.
5. Type the user name of the VMware vCenter user with administrator privileges and press Enter.
6. Type the password of the user with administrator privileges and press Enter.
7. Retype the password and press Enter to confirm the password.
8. Type 11 and press Enter.
RMSV attempts to connect to the VMware vCenter Server. If a Connected successfully message is displayed, continue
to step 8. If a Connection to vCenter failed message is displayed verify the server information and repeat the steps 4
through 7. For additional information, see Troubleshooting RMSV.
NOTE: If a server certificate message is displayed, type y and press Enter to trust the certificate.
9. Add the VMware vCenter Server to Replay Manager Explorer using the host name or IP address of DSITV and the user name
and password of a VMware vCenter user with administrator privileges.
See the Replay Manager Administrator’s Guide for details about adding the VMware vCenter Server to Replay Manager.

NOTE: Replay Manager management tools such as Replay Manager Explorer must be installed on a computer that
has connectivity to the DSITV virtual appliance.

Related links
Logging In to DSITV

Replay Manager Service for VMware 13

 3
Dell Storage vSphere Web Client Plugin
The Dell Storage vSphere Web Client Plugin is a plugin for VMware vCenter that provides storage administrators the ability to
manage Dell storage with the VMware vSphere Web Client.

Installing the Dell Storage vSphere Web Client Plugin

To install the Dell Storage vSphere Web Client Plugin, register the plugin with VMware vCenter.
Prerequisites
• Deploy DSITV and configure the time zone and network settings.
• Identify the host name or IP address of the VMware vCenter Server.
• Identify the user name and password of a VMware vCenter user with administrator privileges.
• Make sure that Dell Storage Manager Data Collector is communicating with Storage Center.

Steps
1. Log in to DSITV.
2. At the CLI prompt, type 4 and press Enter.
3. Type the host name or IP address of the VMware vCenter Server and press Enter.
4. Type the user name of a VMware vCenter Server user with administrator privileges and press Enter.
5. Type the password of the user with administrator privileges and press Enter.
6. If necessary, retype the password and press Enter to confirm the password.
NOTE: If a server certificate message is displayed, type y and press Enter to trust the certificate.
7. Type the host name or IP address of DSITV and press Enter.
8. Type y and press Enter.
9. After the vSphere Web Client Plugin is installed, press Enter to return to the main menu.
Refer to the Dell Storage vSphere Web Client Plugin Administrator’s Guide for details about managing and using the vSphere
Web Client Plugin.

Related links
Logging In to DSITV

Register the vSphere Web Client Plugin After an Upgrade Installation

After a successful upgrade of the DSITV appliance, a reboot is required. You then must unregister and reregister the vSphere Web
Client Plugin from the DSITV appliance’s CLI menu. This action removes the old plugin and registers the new plugin to vCenter.

After performing these steps, if the Dell Storage icon does not appear in the vSphere Web Client, restart the vSphere Web Client
service. See Troubleshooting the vSphere Web Client Plugin.

Removing the vSphere Web Client Plugin

To remove the vSphere Web Client Plugin, unregister the plugin from VMware vCenter.
Prerequisites
• Identify the host name or IP address of the VMware vCenter Server.
• Identify the user name and password of a VMware vCenter user with administrator privileges.

14 Dell Storage vSphere Web Client Plugin

Steps
1. Log in to DSITV.
2. At the CLI prompt, type 5 and press Enter.
3. Type the host name or IP address of the VMware vCenter and press Enter.
4. Type the user name of a VMware vCenter user with administrator privileges and press Enter.
5. Type the password of the user with administrator privileges and press Enter.
6. Type y and press Enter to remove the vSphere Web Client Plugin.
7. After the vSphere Web Client Plugin is removed, press Enter to return to the main menu.
8. To view the changes in the VMware vCenter Web client, log out and log back in.

Related links
Logging In to DSITV

Dell Storage vSphere Web Client Plugin 15

 A
DSITV Application Troubleshooting
To handle any issues with the DSITV application:

• Use the RMSV troubleshooting procedures to troubleshoot issues with Dell Replay Manager Service for VMware.
• Use the vSphere Web Client Plugin troubleshooting procedures to troubleshoot issues with Dell Storage vSphere Web Client
Plugin.

Troubleshooting RMSV
If the Replay Manager is unable to connect to the VMware vCenter Server:

• Verify that the host name or IP address of the VMware vCenter Server is correct and the VMware vCenter Server user has
administrator privileges. See Configuring RMSV.
• Verify that RMSV is running. See Save RMSV Log Files.

If further troubleshooting is required, Dell Technical Support might need a copy of RMSV logs for analysis. See Save RMSV Log Files.

Restart RMSV
Use option 11 in the CLI to restart RMSV and verify that it starts.

1. Log in to DSITV.
2. At the CLI prompt, type 11 and press Enter. The following messages are displayed:
Waiting 15 seconds for the service to restart
Starting replaymanager: [ OK ]

RMSV is stopped and restarted.

• If [ OK ] is displayed, RMSV started successfully.

• If [ Failed ] is displayed, RMSV failed to start.

Related links
Logging In to DSITV

Save RMSV Log Files

Use option 14 in the CLI to save the RMSV log file to a zip file.

1. Log in to DSITV.
2. At the CLI prompt, type 14 and press Enter. The following options are displayed:
1. Gather support information
2. Return to main menu
Enter selection [1 - 2]:
3. Type 1 and press Enter. The zip file with the logs is saved to the root directory of the virtual appliance.
4. Use Secure Copy (SCP) to copy the zip file from the virtual appliance to a local computer.
When the zip file is on a local computer, it can be sent to Dell Technical Support.

Related links
Logging In to DSITV

16 DSITV Application Troubleshooting

Troubleshooting the vSphere Web Client Plugin
Dell Storage Icon Is Missing
If the Dell Storage icon does not appear in the Administration pane of the vSphere Web Client:

• Verify that the host name or IP address of the VMware vCenter Server is correct and the VMware vCenter Server user has
administrator privileges. See Restart RMSV.
• Verify that the vSphere Web Client Plugin is running. See Installing the Dell Storage vSphere Web Client Plugin.
• Restart the vSphere Web Client service.
– For a Windows-based vCenter server, restart the vSphere Web Client service by accessing Server Manager → Services →
VMware vSphere Web Client service. Select Restart to restart the service.
– For a Linux-based vCenter Server appliance, use one of the following commands to restart the service:
* service vsphere-client restart
* /etc/init.d/vsphere-client restart

If further troubleshooting is required, Dell Technical Support might need a copy of vSphere Web Client log files for analysis. See View
vSphere Web Client Log Files.

Plugin Summary and Monitor Page Appears Disabled

Summary information might not display in the vSphere Web Client Plugin. Information will appear blank on the summary page
(Summary tab, then Dell Storage tab) and monitor page (Monitor tab, then Dell Storage tab).

Ensure that the credentials you entered on the Manage tab for vCenter server and Dell Storage Manager configuration are correct.

Snapshot and Snapshot Schedule Creation Fails

When using an NFS datastore to create a snapshot or a snapshot schedule, ensure that the NFS datastore is hosted on a FluidFS v5
system.

Cannot Enable Live Volume to Failover Automatically

Live Volume configured to fail over automatically and promote the secondary volume might fail if the following requirements are not
met:

• Type is Synchronous
• Synchronous mode is High Availability
• Source and target Storage Centers are at version 6.7 or later

Select a datastore or RDM that meets these requirements. Optionally, modify the datastore to meet these requirements or create a
new datastore or RDM.

Failure When Creating NFS Datastores

When using an existing NFS export to create a datastore, ensure that the required ACLs are pre-configured for the NFS export.

Managing an NFS Datastore Created Outside the Plugin

For NFS datastores created outside the vSphere Web Client Plugin, verify that you invoke the Dell Storage view for the
corresponding datastore at least once. This action will retrieve details of the NFS datastore.

In addition, ensure that the vSphere Web Client Plugin can validate the datastore with the registered Dell Storage Manager
configuration.

DSITV Application Troubleshooting 17

View vSphere Web Client Log Files
For additional information, refer to the following publications:

• To view the vSphere Web Client log files, refer to the VMware Knowledge Base article Location of vSphere Web Client 5.x
service logs (2004090).
• To change the logging level, refer to the VMware Knowledge Base article Enabling debug logging on the VMware vSphere
5.x/6.0 Web Client service (2011485).

Registration Failure Related to TLS

Registration of the vSphere Web Client Plugin could fail if the vCenter Server is configured with TLS 1.0 disabled.

18 DSITV Application Troubleshooting