BLASTING AND FRAGMENTATION

An article on the new software and on the associated technologies of blasting and fragmentation is
to be found at this link, a paper from the September 2008 issue of International Mining.
Here is an interesting bit of deep technology from the article.

The effects of an explosion (blast) are as follows:

1. The charge explodes and is split up into high-pressure, high-temperature zones.

2. The gases are applied to the borehole which contains them and this creates a strain field in the rock.
3. This strain field, due to its impulsion aspect, creates a strain wave that is propagated in the rock and
damages the rock.
4. This damage is the center of the cracks in the rock.
5. Gas pressure is reduced via the cracks thus separating the rock fragments.
6. The pressure of these gases applied to the face of the fragments, produces forces that propel the
fragments.
7. The fragments adopt a ballistic trajectory.
8. In areas where the damage to the rock was not sufficient to create fragments, the strain wave continues
its trajectory until it runs out of energy that it dissipates by making the rock vibrate.
——————————————————————————————–

 Signature Blast Analysis and Ground Vibration Simulation Software:

Instantel’s Signature Hole AnalysisSignature Hole Analysis is a modeling technique used to help
control blast induced vibrations. The process involves controlling the frequency content by adjusting
delay times within a blast containing several explosive charges. The risk to adjacent structures is
thereby mitigated. Blastware software+Signature Hole Analysis
AlphaBlast Alpha-Blast Signature Analysis and Vibration Simulation Software. White was the first
company to offer a commercially available program for analyzing the probable effects of blast timing
on amplitude and frequency. If you use or test electronic detonators, the Alpha-Blast program could
be the most important software package you have. As detonation times become more accurate, it
will be necessary to have sophisticated software that will help determine the best delay designs to
achieve the desired results involving vibration control.
Contact:Randy Wheeler, President, E.mail: [email protected] , White Industrial Seismology,
Inc., 1206 Schifferdecker Avenue, Joplin, MO 64801,Toll Free U.S.: (800) 641-4538,Phone: (417)
624-0164,Fax: (417) 624-9416.
 Software for Blasting & Fragmentation Analysis:
Soft-Blast Soft-Blast is the distributor of JKSimBlast, the premier software system for blast design,
analysis and management. JKSimBlast has over 400 users throughout the world in surface,
underground and tunnel blasting applications, working in mines, explosives supply, consulting,
contracting and education.
DNA-Blast Technology (Software)
A unique DECISION AID TOOL that simulates all the possible initiation sequences in your
configuration and pinpoints the sequences that best optimize the energy inside the blast.

I-BLAST 4.4: For the most versatile and powerful blasting design solution ! Whether you are a mining
engineer designing blasts everyday, a manager looking for a better control of blasting operation or a
blaster starting out learning how to improve blast design, DNA-Blast Software has the right tools for
you.
Email: [email protected] , Website: http://www.dna-blast.com
BLASPA inc. The BLASPA blast design simulators uses explosive and rock properties to predict
blasting results, at your mine or construction site. Rock excavation is the first process in the cycle of
operation of a mine, and efficient blasting is key to the profitability of the mine.
DataVis DataVis has created Drill and Blast Software (DBS) a complete system to achieve efficiency
of drill and blast operations. DBS includes a range of integrated drill and blast products designed
specifically for use in open cut and underground mining.
DelPat DelPat will minimize design time and maximize the cost-effectiveness of your next rock
blasting.
Blast Central Blast Central web site. This web site and its tools provide a repository for blast product
information, blasting utilities, blast calculations and blasting and explosive contact information. The
intended audience is blasting engineers and explosives engineers.
Purpose Built Applications Design,calculate and price any Mine,Quarry or Road construction
operation, including adding a presplit ( Smoothwall ) blast with the main production blast.
P-Wave, Inc. Master Blaster, P-Wave’s blast and inventory management software system,
dramatically improves documentation accuracy, minimizes paperwork, and allows for rapid search
and retrieval of blast documentation.
Motion Metrics International Corp. “Motion Metrics International Corp is an advanced technology company
with innovative solutions for the mining industry.”
c/o ICICS, 289-2366 Main Mall
Vancouver, British Columbia V6T 1Z4
Country: Canada
Phone: 604-822-5848
Fax: 604-677-5191
Contact person: Joseph Tsang, Sales and Support Manager, E.mail: [email protected]
Rockmate Technical Services “Rockmate: Blast optimisation software, increase profits, improve safety
and reduce the environmental impact of blasting. Shiftboss: Track real time truck tracking. DXM
Contouring software, free fully working demo available.”
90 Whitehouse Lane
Nantwich, Cheshire CW5 6HH
UK
Phone: +44(0)1270 627160
Fax: +44(0)1270 620118
E-mail: [email protected]
Stroma Engineering iRing is an exciting new software package primarily used in the mining industry
for planning underground blasting operations. Designed and developed in collaboration with a major
international mining corporation, this intelligent tool logically assists planners through the ring
planning and blasting process, automating a time consuming, manual task which allows “planners to
do planning”.
WipWare Inc. “Is the industry leader in optical granulometry of fragmented material.”
145 Palangio Rd., Bonfield Ont. P0H-1E0, CANADA
Phone: 705-776-1882
Fax:: 705-776-1580
E-mail: [email protected]
 Software for Mining Engineering:
Carlson Software (SURVCADD)
Carlson Software,
22 East Third Street,
Maysville, KY 41056
Phone: (606) 564-5028
Fax: (606) 564-6422
Contact: Bruce Carlson, President
E-mail [email protected]
Civil Software Design “SEDCAD” Civil Software Design, established in 1983, develops software products
that enable the efficient design and performance of stormwater, erosion and sediment control systems.
PO Box 706
Ames, IA 50010
Phone: (515) 292-4115 – Monday thru Friday 8:00am to 5:00pm Central Time
E-mail: [email protected]
Coal Software & Systems
105 Mercer Street
Box 829
Princeton, West Virginia 24740
Phone: 304- 467-7856
Fax:304- 467-8716
E-mail: [email protected]
Combinatorics (MineMAX)
Jim Butler
4b, 1 Sarich Way,
Bentley, Western Australia 6102
Australia
Tel: 618-9451-0829
Fax: 618-9361-4077
E-mail: [email protected]
Comdale Technologies (Canada) Inc.
The Comdale Building
701 Evans Avenue, Suite 600
Toronto, Ontario M9C 1A3 CANADA
Tel: 416-620-1234
Fax: 416-620-4526
E-mail: [email protected]
Computerized Business Services “Announcing the latest release of LandTrak– a fully relational database for
the mining industry. Track mining claims, fee land, recordings, leases, documents, and much more.”
11 Badger Court
Carbondable, CO 81623
Phone: 970-963-0122
Fax: 970-963-3296
E-mail: [email protected]
Creative Engineering Co. “Program used worldwide for belt, screw, drag & apron types”
3513 Century Drive
Bakersfield, CA 93306-1238
Phone: 805- 872- 4763
Fax: 805-871-1798
Foresight Software Pty Ltd “CDS Mining, mapping and survey software. Free 60 day trial on-line. Import
and export to Autocad”
75 Lambton Rd,
Broadmeadow, Newcastle, NSW 2292
Australia
Phone: +61 2 49696512
Fax: +61 2 49653425
E-mail: [email protected]
Gemcom Software International Inc. “Gemcom provides mine production management solutions that help
mine sites reduce costs and maximize efficiency.”
1066 West Hastings Street
Vancouver, B.C. V6E 3X1
Country: Canada
Phone: (604)684-6550
Fax: (604)684-3541
Email: [email protected]
GemTeck Environmental Software Ltd. A highly respected, global provider of advanced environmental data
management software products. With over 20 years of experience, their popular EQWin systems are used by
many major global mining companies in hundreds of mine sites worldwide. Their new EQWin Data Manager
Ver 6.0 environmental data management software manages all of the processes and data involved in
monitoring the effects of industry on the environment to ensure regulatory compliance and support sustainable
development. It handles all surface water, ground water, biological soil and air quality data, as well as many
other frequently monitored environmental sub-systems. It also has many powerful and advanced technological
features that make it unique in the industry. They include seamless integration with Microsoft Excel for all
input, analysis and output, and a language translation module that enables users to work with the software in
any language. It’s also fully compatibility with Microsoft Access and SQL Server databases and has interface
modules for ArcGIS and MapInfo.”
400 – 1285 West Pender Street
Vancouver, BC V6E 4B1
Canada
Phone: 1 (604) 408-7304 / 1 (866) 408-7304 toll free in North America.
Fax: +1 (604) 684-3541
E-mail: [email protected]
Gibbs Associates
P.O. Box 706
Boulder, CO 80306-0706
Phone: 303-444-6032
Fax: 303-444-6032
MineMap Software – Mine Planning, Design, Surveying, Scheduling, Production and Reconciliation
Software
Since 1976 mining and exploration companies worldwide have been using MineMap software to
develop cutting-edge solutions for their exploration and mining requirements. MineMap IMS is the
world’s first fully integrated mining software system, giving mining professionals the flexibility to
rapidly respond to changing conditions and make decisions using cutting-edge mining software
features, including geological modelling, optimisation, mine design, scheduling and reconciliation.

MineMap Pty Ltd , Suite 9 – 40 Victoria Street, Midland WA , 6056 , Australia

Tel: +61 8 9250 7885
Fax: +61 8 9250 7886
Email: [email protected]
URL: www.minemap.com.au

GoldSim “Simulation Software for Water Management, Environmental Compliance, Evaluation of Closure
Options and More.”
22516 SE 64th Place, Suite 110

Issaquah, WA 98027

Phone: 206-376-7744

Fax: 425-642-8073

E-mail: [email protected]
Integrated Technical Solutions
34208 Aurora Road, Suite 212
Solon, Ohio 44139
Phone: 216-248-9186
Fax: 216-248-9086
Jasper Communications, Inc.
Perfect Blend
2762 Cathy Lane
Jasper, IN 47546
Pone: 812-482-1281
E-mail: [email protected]
Johnson & Moore Consulting, Inc
236 E. Main Street
P. O. Box 989
Lexington, KY 40588-0989
Phone: 1-800-654-5298
FAX: 1-606-252-1884
E-mail:[email protected]
Kanawha Scales & Systems, Inc.
Rock Branch Industrial Park
P.O. Box 569
Poca, West Virginia 25159
Phone: 304-755-8321
Fax: 304-755-3327
E-mail: [email protected]
LISCAD Surveying & Engineering Software “LISCAD Land Surveying & Engineering Software features
geodetic COGO computations; total station, data logger, GPS and digital level field surveying reduction;
AutoCAD dwg, MicroStation dgn and LandXML compatibility; profiles and road design; least squares
adjustment and transformations; digital terrain models (DTM) and contours; earthworks volumes and
georeferenced background images”
21 Chandler Road
Boronia, Vic 3155
Country: Australia
Phone: +61 3 97620022
Fax: +61 3 97620033
E-mail: [email protected]
Micromine “Micromine is a global mining technology solution provider, offering an integrated system of
mining software and mining consulting services. Products include field data entry software, exploration
software, resource estimation software, mine design software, mine planning software, mine production
management systems and data management systems.”
Georgia Business Centre Suite 1400 1500 West Georgia Street
Vancouver, British Columbia V6G2Z6
Country: Canada
Phone: +1 604 687 0701
Fax: +1 604 685 1520
Email: [email protected]
Mincom, Inc. Mincom’s Enterprise Mining Solution (EMS) provides mining companies with a single
enterprise solution that manages every mining process. EMS offers you unprecedented integration, efficiency
and profitability, providing a wider range of information to enable managers to make better decisions ‘in the
pit’.
1675 Broadway Suite 900
Denver, CO 80202
Phone: 303-446-9000
FAX: 303-446-6335
Mintec, Inc.
Contact: Susan Wick, Executive Vice President, 3544 E. Ft. Lowell Rd.
Tucson, Arizona 85716-1705
Phone: 520-795-3891
Fax: 520-325-2568
E-mail: [email protected]
MicroLYNX Mining Software
Clifton Beach, 4879
Qld, Australia
E-mail: [email protected]
Micromine (Canada) “Micromine was established in 1986, and has an enviable reputation in software quality
and design, support and maintenance. It has a range of mining software products unequalled in the industry
has a policy of continuous improvement and development.”
205 South Gilmore Ave
Burnaby, BC V5C 4P9
CANADA
Phone: 604-294-4101
Fax: 604-294-4109
E-mail: [email protected]
Modular Mining Systems, Inc.
Modular is the one of the leading solution providers in providing powerful information management
solutions to meet the needs of both open pit and underground mining operations worldwide. Modular
sales and support offices are located in all key world-mining markets. For more information, visit the
Modular website at http://www.modularmining.com
E-mail Frank Olivieri : [email protected] Email: [email protected] , Phone: 520.806.3234
Mountain Cad Corporation
P.O. Box 8157, 339 Sixth Avenue, SW
South Charleston, WV 25303
Phone: (304) 744-7911
Fax: (304) 744-8049
E-mail: [email protected]
RockWare Earth Science Software
2221 East St., Suite 101
The RockWare Building
Golden, Colorado 80401
Phone: 303-278-3534
Fax: 303-278-4099
Toll Free 1-800-775-6745
Salix Applied Earthcare and John McCullah and Associates
“Erosion Draw 2.0”
3141 Bechelli Lane
Redding, CA 96002
Phone: 530-224-0878
Fax: 530-224-0879
Softree Technical System Inc.
Suite #8
650 Clyde Avenue
West Vancouver, B.C. V7T 1E2
Canada
Phone: 604-664-7708
Fax: 604-926-3075
E-mail: [email protected]
Split Engineering LLC “Produce image analysis software that automatically calculates and quantifies rock
fragmentation. We also do consulting and research.”
P.O. Box 41766
Tucson, AZ 85717
Phone: 520-327-3773
Fax: 520-326-7532
email: [email protected]
Surpac Software International
1122 Mainland Street, Suite 330
Vancouver, British Columbia
Canada V6B 5L1
Phone: (604) 602-1200
Fax: (604) 602-1201
E-mail: [email protected]
SustaiNet Software Solutions Inc. “Exclusive N/American distributor of environmental and consultation
management software systems for several well established, internationally recognized software companies.
These systems provide those with environmental/community sustainability responsibilities the knowledge that
their information is efficiently managed.”
100, 740 Nicola St.
Vancouver, BC V6G 2C1
Canada
Phone: +1 604 717-4327
Fax: +1 604 736-9531
E-mail: [email protected]
TerraSource Software
210 South Rock Blvd
Reno, Nevada
USA 89502
Phone: (775) 856-2913
Fax: (775) 856-6053
E-mail: [email protected]
Western Mine Engineering, Inc. “Western provides software for economic evaluations. Sherpa calculates
operating and capital costs for surface and underground mines. Apex, our financial software package, quickly
evaluates mining projects producing cash flow analyses, risk analyses, and DCF-ROI results.”
222 West Mission Ave, Ste 218
Spokane, WA 99201-2347
Phone: 509-328-8023
Fax: 509-328-2028
E-mail: [email protected]
World Mine Cost Data Exchange Inc. “Download engineering-based spreadsheet models of major metals
mines, industry cost curves and mine production data.”
3511 Silverside Road, Suite 105
Wilmington, DE 98810
Phone: 212 903 4144
Fax: 212 573 8362
Michael J Farrell, Principal
E-mail: [email protected]
Honeywell Process Solutions’ (HPS) production accounting and reconciliation software is for
improving performance in mines. Honeywell’s production accounting and reconciliation (PAR)
software solution can be used to resolve material and energy balance problems in various industries.
Honeywell production management technologies enable accurate estimates of metal inventory and a
better understanding of plant performance, leading to improved market
responsiveness. https://www.honeywellprocess.com/ , https://www.honeywellprocess.com/en-
US/pages/default.aspx
 Software related to GPS / GIS & Mapping:
AzTechSoft “Makers of GPS2CAD – Plot your GPS points in AutoCAD Software and Resources for the
Engineering, Architectural, and AutoCAD Communities.”
GeoGRAFX “Offers technical illustration, drafting and digitizing services as well as digital maps of Mexico
in most popular GIS formats”
8600 N. Burke/Tucson, AZ 85742
e-mail: [email protected]
phone: 520-744-4457
fax: 520-744-3066
Micro Map & CAD
“Maps for CAD”
35678 Hobnail Court
Elizabeth, CO 80107
Toll-Free (800) 627-2923
Phone: (303) 988-4940
Fax: (303) 646-4256
E-mail: [email protected]
Techbase International “TECHBASE has been writing software for the mining industry for 22 years. This
dedication has resulted in a stable, robust, highly functional software that performs all your mining software
tasks. Techbase stores your data in a database manager written for the mining industry. You can then create
graphs, maps, graphical logs and cross-sections. Model your data into surface or 3D blocks and calculate
volumes and reserves. Known as a very flexible software which can solve even the most difficult tasks,
Techbase also has productivity tools allowing you to automate all your mining tasks.”
PO Box 1140
Morrison, CO 80465
Phone: 303-980-5300
Fax: 303-969-0022
Email: [email protected]
 Software related to Surveying:
CGSS
Phone: 800-367-1157
E-mail: [email protected]
MicroSurvey Software, Inc.
2406 Drought Road,
Westbank, BC
Canada V4T 1P6
Phone: 800-668-3312 or 250-707-0000
Fax: 705-752-2133
E-mail: [email protected]
PC Survey
Soft-Art, Inc.
103 Sumner Court
Hendersonville, TN. 37075
Phone: 800-652-7279 or 615-826-8095
Fax: 615-826-0306
E-mail: [email protected]
Simplicity Systems’
PO BOX 556
EAST GRAND FORKS, MN 56721-0556
Phone: 218- 773-8917
E-mail: [email protected]
Softree Technical Systems Inc. “Free Surveying and Mapping Software”
#8-650 Clyde Avenue
West Vancouver B.C.
Canada, V7T 1E2
Phone: 604-519-6222
Surpac Software International
1122 Mainland Street, Suite 330
Vancouver, British Columbia
Canada V6B 5L1
Phone: (604) 602-1200
Fax: (604) 602-1201
E-mail: [email protected]
TerraSource Software
210 South Rock Blvd
Reno, Nevada
USA 89502
Phone: (775) 856-2913
Fax: (775) 856-6053
E-mail: [email protected]
Traverse PC
P.O. Box 105
Florence, OR 97439
or
4969 Highway 101
Florence, OR 97439
Phone: 800-460-3002 or 541-997-9201
Fax: 541-997-3546
E-Mail: [email protected]
Z-World
2900 Spafford Street
Davis, CA 95616 USA
Phone: 530-757-3737
Fax: 530-753-5141
E-mail: [email protected]
 Maintenance Software:
4Site, CMMS software “4Site is a CMMS software solution developed by fsc limited, which offers a totally
integrated financial module.”
1118 Roland St.
Thunder Bay, Ontario P7B 5M4
Country: Canada
Phone: (807) 623-2310
Fax: (807) 622-4251
Email: [email protected]
BDR Systems, Inc. “MPRO 2000 PLUS Professional Maintenance System provides preventive maintenance
for equipment and vehicles. The MPRO 2000 CMMS maintenance software provides ISO9000 compliant
monitoring and control of the preventive maintenance program. The CMMS maintenance software is suitable
for small, medium and large companies. Included is a Requisition system, On line procedures, Maintenance
Due alerts, Inventory and Purchasing.”
P.O. Box 312
Downingtown, PA 19335
Phone: 610-873-7570
E-mail: [email protected]
Bradbury and Associates, Inc. Equipment Maintenance Software
501 Darby Creek Rd. Unit 61 & 61A
Lexington, KY 40509
Phone 1-800-489-1709
E-mail: [email protected]
Da-trol Group Inc. “Da-Trol Group Inc. – A sales and service organization with a focus on CMMS. Da-trol
presents and promotes several CMMS applications and leads the client through a simple, logical process
which aids the discovery of which CMMS would be best suited to their needs. Da-trol also provides quality
implementation services for the selected system.”
285 St. Andrews
Hamilton, Ontario L8K 5K2
Canada
Phone: 905-426-8926
Fax: 905-561-7266
E-mail: [email protected]
Decisive Systems, Inc. “Heavy equipment and machinery Owning and Operating cost per hour, day, week,
month or year. Mining operations depend on accurate information and that is what Decisive Systems’ tools
supply. DecisiveCost is a family of electronic tools designed to add profitability to your mine or quarry. If you
have machinery, trucks and equipment, you can know your exact cost per hour under a variety of different job
conditions. We track, control and manage fleets of equipment from 5 to 5000 pieces.”
2138 Sandrala Dr.
Sarasota, FL 34231
Phone: 941-926-9260
Fax: 253-276-7107
E-mail: [email protected]
EZ Maintenance CMMS Preventive Maintenance Software “EZ Maintenance software for total equipment
and vehicle maintenance. This CMMS preventive maintenance software can track and unlimited number of
vehicles or pieces of equipment.”
23542 Lyons Ave Suite 200B
Santa Clarita, CA 91321
Phone: 661-286-0043
Fax: 661-286-0020
E-mail: [email protected]
ISM Group “Real time, web based, low cost, data acquisition and monitoring system to reduce downtime and
maintenance cost.”
5701 Otero Ave
Loveland, CO 80538
Phone: (970) 593-1486
Fax: (970) 593-1486
E-mail: [email protected]
Ivara Corporation “Ivara is in the business of providing software tools and business practice solutions in the
form of Computerized Maintenance Management Systems (CMMS), Enterprise Asset Management (EAM)
systems, Expert Maintenance Program (EXP) and maintenance consulting and training services specifically
designed to speed up customers’ time to benefit and improve equipment reliability. Ivara is licensed by Aladon
to provide Reliability-Centered Maintenance (RCM) consulting.”
935 Sheldon Court
Burlington, Ontario L7L 5K6
Canada
Phone: 905-632-8000
Fax: 905-632-5129
E-mail: [email protected]
LinkOne
61 Wyandra Street
Teneriffe QLD 4005
Australia
Phone: +61 (0) 7 3303 3372
E-mail: [email protected]
MaintSmart “Maintenance management software that uses reliability analysis to derive optimized PM task
lists. Also provides: work orders, failure analysis, inventory, purchasing, sk ills. Easy to learn, use, and benefit
from.”
216 S. Fairmont Ave.
Lodi, CA 95240
Phone: 209-367-0450
Fax: 209-369-9396
E-mail: [email protected]
MPC Solutions, Inc. MPC Tire Tracking is professional tire tracking software which can be downloaded at
no charge and evaluated for 31 days.
824 Gregory Ave.
Bedford, TX 76022
Phone: 817-868-7372
E-mail:[email protected]
Mapcon “MAPCON (Maintenance Planning and Control) is a fully functional CMMS (Computerized
Maintenance Management System) designed to reduce maintenance costs and exte nd the life of corporate
assets. The various modules are linked together to provide a seamless flow of data throughout the facility.
Generating repair and preventive maintenance work orders against equipment, locations, or cost centers,
MAPCON also provides project management, inventory and tool control, and will help you plan and schedule
your maintenance tasks. For a free evaluation of Mapcon or MapconLite, visit our website
at www.mapcon.com.
8865 Harbach Blvd.
Clive, IA 50325
Phone: 515-331-3558
Fax: 515-331-3373
E-mail: [email protected]
Perspective CMMS “A world leading independent maintenance software consultancy. We specialise in
providingfree advice on CMMS selection.”
32 Beaton Road, Balloch
Alexandria, West Dunbartonshire g83 8qq
Scotland, UK
Phone: 01389 758245
Fax:
Email: [email protected]
Rushton International & Associates Inc. “Since founded in 1978, Rushton International’s expert consultants
and real-world software have been redefining the maintenance experience for companies worldwide, saving
them 15-50% in the process. Software: Sabre32 is a complete maintenance, inventory, and purchasing
package. It can be used stand-alone, or added to another program to improve maintenance capabilities. It is
fully customizable, easy to understand and use, and written by maintenance experts. Sabre32 manages work
orders, work requests, purchase orders, preventive maintenance, scheduling, warranties, tires, components,
wear materials, fuel/lubes, inventory, equipment, reporting, and employees. Free demo CDs are available
upon request. Consulting: Rushton’s consultants have years of mining and maintenance experience. They can
help you install an effective maintenance program from the ground up, or improve your existing program.”
4535 S. Commerce Dr, Ste B
Murray, UT 84107
Phone: 801-281-4466
Fax: 801-685-0664
E-mail: [email protected]
Sigma Data Systems, Inc. “I’mOnIt! Preventive Maintenance Software: For under $500, I’mOnIt! Equipment
Maintenance Software is an easy-to-use, affordable Computerized Maintenance Management System (CMMS)
that allows you to easily track and monitor the maintenance and repair schedule of any kind of equipment.”
PO Box 9767
Newark, Delaware 19714
Phone: 302.453.8812
Fax: 302.453.8916
E-mail: [email protected]
Smart Maintenance “Smart Maintenance is easy, effective, and affordable maintenance software (CMMS)
used for preventive maintenance, work order management, inventory, predictive maintenance, asset tracking,
labor, maintenance requests, tool crib and more. Our CMMS software works great in facilities of all sizes,
from a one-person maintenance shop to an entire department of maintenance professionals or even across the
country with multiple facilities and is highly customizable to suit the needs of any industry.”
P.O. Box 188
Center Harbor, NH 03226
Phone: 866-858-7800
Fax: 866-858-7800
E-mail: [email protected]
TF &WJ McGovern Pty Ltd Mining Safety – Computer Aided Learning (CAL) Packages
ACN 073 705 610
PO Box 928
Biloela Qld Australia 4715
Phone: 07-499-226-23
Fax: 07-499-226-23
E-mail: [email protected]
 Management Training Software:
KnowledgeWare Communications Inc. “A Western Canadian company with more than 10 years
experience in developing innovative software efficiency tools for HR / safety professionals.
KnowledgeWare develops software efficiency tools for safety professionals. ‘Simply Safety!®’ is a
software tool that can centralize and simplify your company’s mandatory record keeping and
reporting. It increases your efficiency and helps reduce legal risk by allowing easy management of
people, safety and training.”
11763 Darby Street
Maple Ridge, British Columbia v2x2w6
Country: Canada
Phone: 1-800-893-9333
Fax: -604-467-4681
E-mail: [email protected]
MROnly.com “An international company, operating from the island of Bali, providing knowledge-based
solutions – business systems assembly, software development, performance management consulting – to a core
group of vertical, asset intensive industries such as mining, utilities, oil & gas, transportation and pulp and
paper.”
No. 3 Shenton Way, #10-05 Shenton House
Singapore, Singapore 068805
Phone: +62 21 5201655
Fax: +62 21 5256609
E-mail: [email protected]
Plateau Training Management Software
4041 University Drive Suite 400
Fairfax, Virginia 22030
Phone: (703) 934-0100
Fax: (703) 934-1363
E-mail: [email protected]
 Other Software Related Links:
Conspec Controls Inc.
6 Guttman Blvd.
Charleroi, Pennsylvania 15022
Phone: (724) 489-8450
Fax: (724) 489-9772
Toll Free: 1-800-487-8450
E-mail: [email protected]
DICKSON “Dickson is a manufacturer of monitoring systems, data loggers, chart recorders, hand held
indicators, and software that monitor variables such as temperature, humidity, pressure, and universal input.”
930 S Westwood Avenue
Addison, IL 60101-4917
Phone: 800-323-2448
Fax: 800-676-0498
E-mail: [email protected]
FEI Company “FEI Company is manufacturer of a dedicated Mineral Liberation System, based on Philips’
XL Series electron microscopes.”
Achtseweg Noord 5
Eindhoven, NB 5651 GG
The Netherlands
Phone: +31 40 2766225
Fax: +31 40 2766587
E-mail: [email protected]
Mine Performance Monitoring Systems, LLC ONIX is a PC based, client server, enterprise wide software
available in modules that collect and report information associated with mining production, processing plants,
product quality, product inventories, shipments, safety and training, production delays and more.
1133 Steeplechase Drive
Morgantown, WV 26508
Phone: 412-429-9800
Fax: 412-429-9801
Contact: Kim A. Burke, President
E-mail: [email protected]
TASCware, Inc. “IS-TASCware is a solution that enables companies to wirelessly monitor and collect real
time data on employee cycle times and production throughput. IS-TASCware’s solution allows your business
to produce more without spending more!”
950 North Point Parkway
Suite 350
Alpharetta, GA 30005
Ph. 770-751-1200
Fax. 770-751-0529
Toll Free 1-888-TASCsales
Contact: Keith O’Rourke
E-mail: [email protected]
Technisys, Inc. “Technisys, Inc. is the authorized agent and distributor for the ABB Automation, Control,
Drives and Motors groups. We represent ABB in Idaho, Nevada, Utah, Colorado, Montana and Wyoming.
Since 1997, Technisys has received the “Largest Systems Integrator Award” from ABB Automation each year.
In support of the products we represent, we have a staff of full-time engineers to assist with any
implementation, project management and integration needs that may be required.”
900 N 400 W, Building #1
North Salt Lake, Utah 84054
Phone: 801 296 9500
Fax: 801 296 9601
Email: [email protected]
Wellpoint Systems “WellPoint Systems incorporates a fully integrated mining/exploration Microsoft
solution by providing a single point of entry for every key area of your business.”
2000, 500-4 Ave SW
Calgary, Alberta T2P1C4
Country: Canada
Phone: 403-444-5847
Email: [email protected]
 System regarding various Mines Safety applications:
SAFEmine™ (Collision avoidance and traffic safety for vehicles in surface mines) is a compact Traffic
Safety and Collision Avoidance System (CAS), suitable for all types of vehicles in open pit mines. It
warns with audio and visual indications of possible collisions and supports the driver by improving
his traffic awareness, especially in blind spots around his vehicle.
SAFEmine Ltd , Lindenstrasse 4, 6340 Baar, Switzerland
Tel: + 41 41 760 85 63, Fax: + 41 41 760 85 65
Email: [email protected]
URL: www.safe-mine.com