Scribd Logo
Upload

Welcome to Scribd!

  • 181 views

    Manual Calc. Welded Storage Tank API-650

    Uploaded by

    safar bahari
    This mechanical data sheet provides design and material specifications for a large storage tank. Some key details include: - The tank has an inner diameter of 36500 mm and height of 14500 mm. - It is designed to operate between -15 to 155 degrees Celsius and withstand pressures from atmospheric up to -7 mbar.g. - The tank shell, bottom, roof and other components are made of various grades of steel, including A516 Grade 70 and A283 Grade C. - Inspection will include 10% radiography/ultrasonic testing and material testing and inspection by the designated code.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Manual Calc. Welded Storage Tank API-650

    Uploaded by

    safar bahari
    181 views1 page
    This mechanical data sheet provides design and material specifications for a large storage tank. Some key details include: - The tank has an inner diameter of 36500 mm and height of 14500 mm. - It is designed to operate between -15 to 155 degrees Celsius and withstand pressures from atmospheric up to -7 mbar.g. - The tank shell, bottom, roof and other components are made of various grades of steel, including A516 Grade 70 and A283 Grade C. - Inspection will include 10% radiography/ultrasonic testing and material testing and inspection by the designated code.

    Original Description:

    Test Method

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This mechanical data sheet provides design and material specifications for a large storage tank. Some key details include: - The tank has an inner diameter of 36500 mm and height of 14500 mm. - It is designed to operate between -15 to 155 degrees Celsius and withstand pressures from atmospheric up to -7 mbar.g. - The tank shell, bottom, roof and other components are made of various grades of steel, including A516 Grade 70 and A283 Grade C. - Inspection will include 10% radiography/ultrasonic testing and material testing and inspection by the designated code.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    181 views1 page

    Manual Calc. Welded Storage Tank API-650

    Uploaded by

    safar bahari
    This mechanical data sheet provides design and material specifications for a large storage tank. Some key details include: - The tank has an inner diameter of 36500 mm and height of 14500 mm. - It is designed to operate between -15 to 155 degrees Celsius and withstand pressures from atmospheric up to -7 mbar.g. - The tank shell, bottom, roof and other components are made of various grades of steel, including A516 Grade 70 and A283 Grade C. - Inspection will include 10% radiography/ultrasonic testing and material testing and inspection by the designated code.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    Mechanical Data Sheet

    General
    01 Design Code API 650 ASME Stamp No
    02 Compliance with P.E.D 97/23/EC CE Stamp No
    03 Fluid Hazard Group (P.E.D 97/23/EC)
    04 Applicable Project Specs
    05
    06 Design Data
    07 Tank I.D 36500 mm Boot Inside Diameter DDC Sump Depth DDC
    08 Height 14500 mm
    09 Operating Pressure (Min / Max) Atsmophere / - mbar.g Operating Temp. (Min/Max) -15 155 °C
    10 Design Pressure at Top (Int/Ext) 20 / -7 mbar.g Design Temp. (Min/Max) -15 170 °C
    11 Corrosion Allowance Weld Joint Coefficient (Long/Circ) 0.85
    12
    13 Penumatic Test Pressure : (Reinf. Pad) : DDC mbar.g Field Hydrotest Full of Water
    14 Wind Loading See Specification Seismic Loading Lateral ± : 0,07 Vertical ± : g
    15 Cyclic Operation No
    16 Temp. Range (Min/Max) - °C
    17 PWHT No
    18 Design Stress (Shell / Roof / Bottom) DDC MPa Pipe / Forging DDC DDC MPa
    19 Project Design Stress (Anchor Bolt) DDC MPa Concrete Bearing 10 MPa
    20 Steam Out Design Case No Steam Coil Design 0,5 MPa @ 180 °C
    21
    22 Material Specifications
    23 Shell / Bottom / Roof A 516 Gr. 70 Insulation Support A 283 Gr. C
    24 Nozzle Reinforcement A 516 Gr. 70 Welded Attachment A 283 Gr. C
    25 Nozzle Neck Pipe A 336 Gr. 6 Loose Internal Pipe A 333 Gr. 6
    26 Nozzle Neck Plate A 516 Gr. 70 Loose Internal Plate A 283 Gr. C
    27 Forged Nozzle - Stud Bolts (Ext) A 320 L7M
    28 Forged Flange & Blind A 350 LF 2 Nuts (Ext) A 194 7M
    29 Welding Fitting DDC Bolt (Int) A 320 8 M
    30 Wind Girders DDC Nuts (Int) A 320 8 M
    31 Welded Internal DDC Gaskets (Ext) SWGF
    32 Special Material Requirement None Gaskets (Int) DDC
    33 The Maximum Carbon Content of Carbon Steel shall be 0,23%. Max C.E (IIW) = 0,43%
    34 Inpection Data
    35 Radiography / Ultrasonic 10% Mill Test Certificate EN 10204-3.1 Required
    36 Material Testing & Inspection By DDC Production Control Test Plate As Per Code
    37 Painting & Insulation
    Finish External Finish Internal
    Support (Int/Ext)

    You might also like