0% found this document useful (0 votes)
42 views1 page

Example #2-Hydraulically Fractured Well (Example2.csv)

This document summarizes a hydraulically fractured tight gas well in Northern Alberta that received a 50-tonne fracture treatment prior to production. It provides reservoir parameters including initial bottomhole pressure, temperature, net pay thickness, porosity, water saturation, and gas composition. It also poses questions about whether the well exhibits boundary dominated flow, the success of the stimulation treatment, and whether a rate drop after 220 days results from a decreased productivity index.

Uploaded by

Jaime Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
42 views1 page

Example #2-Hydraulically Fractured Well (Example2.csv)

This document summarizes a hydraulically fractured tight gas well in Northern Alberta that received a 50-tonne fracture treatment prior to production. It provides reservoir parameters including initial bottomhole pressure, temperature, net pay thickness, porosity, water saturation, and gas composition. It also poses questions about whether the well exhibits boundary dominated flow, the success of the stimulation treatment, and whether a rate drop after 220 days results from a decreased productivity index.

Uploaded by

Jaime Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Example #2- Hydraulically Fractured Well (example2.

csv)

Description:

- Tight gas, naturally fractured, faulted reservoir, Northern Alberta


- 50 tonne hydraulic fracture treatment prior to production

Reservoir / Wellbore Parameters:

Pi = 13,800 kPa (bottomhole)


T = 60 deg C
h = 20 m
porosity = 20 %
Sw = 20 %
G = 0.7
CO2, H2S, N2 = 0

Questions:

- Does the well exhibit boundary dominated flow? If so, what is the GIP?
- Was the stimulation treatment successful?
- Is the drop in rate after 220 days a result of a decreased productivity index?
Why or why not?
- Is this data a good application for the Fetkovich typecurves?

You might also like