Mopar Perf Parts Catalog
Mopar Perf Parts Catalog
Mopar Perf Parts Catalog
40 CHRYSLER 300
12 T/A Performance Hoods and Components
14 Wheels
42 Air Induction Systems
15 Brakes
42 Exhaust Systems
16 Stage Packages
43 Filter
17 Bee-Liever Packages
44 Suspension Upgrades and Components
17 Powertrain Control Modules
46 Stage Performance Packages
17 Filter
47 Brakes
18
47 Powertrain Control Modules
DODGE CHARGER
48 RAM 1500
20 Air Induction Systems
20 Exhaust Systems
50 Air Induction Systems
21 Brakes
51 Exhaust Systems
21 Wheels
52 Suspension Upgrades and Components
22 Suspension Upgrades and Components
54 Leveling Kits
24 Stage Packages
55 Wheels
25 Bee-Liever Packages
56
25 Powertrain Control Modules
25 Filter RAM 2500/3500
58 Winch & Mounting Components
60 PERFORMANCE
29 Suspension Upgrades
30 DODGE DART
32 Air Induction Systems
32 Exhaust Systems
33 Performance Hood and Venting
GAUGES & LIGHTS
62 Gauges
65 Gauge Pods
66 SilverStar Lighting
34 Aerodynamics
68 LIMITED
35 Brakes
35 Suspension Upgrades
35 Wheels
*Many images shown throughout the catalog are representative
of the product. Actual product may vary.
WARRANTIES
WHY US?
THAT’S A GOOD QUESTION.
For starters, we were there when your car
was just a sparkle in a designer’s eye. We were
there from idea to clay model to production
line. No one understands your entire car’s
functionality, spirit and philosophy like us.
We design your car. We engineer your
car. We build your car.
4 P E R F O R M A N C E PA R T S C ATA L O G
How does it fit and function within the system NO ONE TESTS
its connected to? We make sure our parts go LIKE US. PERIOD.
above and beyond answering these questions. Let’s say you’re looking at a Mopar® and an
Our parts are always designed to complement aftermarket performance part, side-by-side.
your car’s aesthetic, functionality They might look very similar, but
and performance. you’re probably looking at two
completely different parts.
ORIGINAL
EQUIPMENT VS Our rigorous testing process
REVERSE is superior to the aftermarket.
ENGINEERED. They simply don’t have access
You need correct measurements to cutting-edge testing facilities.
to build the absolute best At Mopar®, we use all the FCA US
parts to maximize your vehicle’s LLC resources and partnerships
horsepower, speed and handling. we have available:
Aftermarket parts providers can
spend countless hours reverse • Extensive temperature testing in
engineering their parts. They try extreme cold and hot weather
to work backwards in hopes • X-raying of raw materials and
of getting it right. Only Mopar® finished parts to confirm quality
knows and utilizes your vehicle’s • C omprehensive crash testing
exact measurements all the way for overall safety
down to the nuts and bolts. • Wind tunnel analyzation to test
aerodynamic performance
WE ARE THE • Simulated mileage examinations
EXPERT’S EXPERTS.
Being the OEM gives us exclusive YOU CAN HEAR,
access to data and generations of SEE AND FEEL THE
real-world testing. With Mopar®, we DIFFERENCE.
provide the most precise-fitting The difference in design, testing,
parts, unparalleled engineering, engineering and quality between
an integrated design approach and unrivaled Mopar® and the aftermarket is clear when it
testing facilities and resources. These are the comes down to your car’s speed, handling,
significant advantages that give us the power to quality, safety and looks. And in the end,
push your car’s performance to the next level. that’s what performance is all about.
M O PA R . C O M 5
6 P E R F O R M A N C E PA R T S C ATA L O G
8
You own an icon. But now it’s time to rule the streets. If you’re ready
to unleash the full power of your Challenger, there’s no better place Air Induction Systems
to be for authentic, aggressive and obsessively tested performance
parts. Maybe you’re ready to add swag and horsepower with a
shaker hood and cold air induction kit. Or maybe you want the
party to know you’ve arrived by installing a new exhaust system.
Exhaust Systems 9
No matter what you’re looking for, you’ll find what you need to take
10
your Challenger to the next level. Suspension Upgrades
and Components
M O PA R . C O M 7
a
2008-2010, Challenger, 6.1L, P/N 77060006AB . . . . . . . . . . . . . . $412.00 Replacement Air Filter for 5.7L & 6.4L Cold Air Intake Kits
2011-2018, Challenger, P/N 68256672AA. . . . . . . . . . . . . . . . . . $73.00
Note: P/N 68256672AA for use with P/N 77070043AC,
P/N 77070044AC, P/N 77070044AD, P/N 77070023AC, and
P/N 68239826AA (Shaker) all with plastic filter adapter.
8 DODGE CHALLENGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
EXHAUST SYSTEMS
CAT-BACK EXHAUST SYSTEM - 5.7L
Features T304 stainless steel construction (aircraft quality) with
mandrel-bent tubing, stainless band (Torca) clamps and polished tips.
Free-flow system provides horsepower and torque gains, while giving
your Challenger a deeper exhaust tone, without unwanted drone.
See representative image (Fig. c)
M O PA R . C O M 9
d
SUSPENSION UPGRADES
AND COMPONENTS
STAGE 1 PERFORMANCE SPRINGS
These performance springs are for Challenger owners who desire a sporty
yet comfortable ride. They reduce ride height up to 1.0" for that low, custom
look. The high tensile spring material ensures durability. Set of four.
f
10 DODGE CHALLENGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
h
M O PA R . C O M 11
SHAKER HOODS AND KITS
2011-2014 CHALLENGER 5.7L
Includes Aluminum Hood E-Coated - ready for paint, Trim Ring Kit, Underhood Shaker Decal and Washer Hose.
2011–2014, Challenger, 5.7L, P/N 82213396AB (Fig. i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,050.00
Note: Use with Shaker Induction Kit P/N 82214110AB
Includes Shaker Scoop, Base Plate, Cold Air Induction and Shaker Logos.
2011–2014, Challenger, 5.7L, P/N 82214110AB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,700.00
Note: Use with Shaker Hood Kit P/N 82213396AB
STEP1
Includes Aluminum Hood E-Coated - ready for Includes Aluminum Hood E-Coated - ready for paint,
paint, Trim Ring Kit, Underhood Shaker Decal and Trim Ring Kit, Underhood Shaker Decal and Washer
Washer Hose. For use with Shaker Induction Kit Hose. For use with Shaker Induction Kit P/N 82214479 -
P/N 82214479 - 5.7L or P/N 82214586AB - 6.4L 5.7L or P/N 82214586AB - 6.4L (unfinished, to be
(unfinished, to be painted to match vehicle). painted to match vehicle).
2015–2018, Challenger 5.7L/6.4L, P/N 82214312AB . . . . . . . $1,235.00 2015–2018, Challenger 5.7L/6.4L, P/N 82214312AB . . . . . . . . . . $1,235.00
Includes Shaker Logo, Shaker Scoop, Base Plate Includes 392 Hard Badge, Shaker Scoop
and Cold Air Induction. and Cold Air Induction
2015–2016, Challenger 5.7L, P/N 282214479 . . . . . . . . . . . . . . . .$1,730.00 2015-2016, Challenger, 6.4L, P/N 282214586AB . . . . . . . . . . $1,910.00
Note: Use with Shaker Hood Kit P/N 82214312AB - $1,235.00 Note: Use with Shaker Hood Kit P/N 82214312AB - $1,235.00
STEP1
Designed to duct outside air when used with T/A style hood. Designed to duct outside air when used with the T/A style hood
Requires Cold Air Intake P/N 77060003AC, T/A Hood (P/N 82214313AB) to Cold Air Intake System (P/N 77072361).
P/N 82211665AD. Will not work with production air filter Includes Hood Scoop Bezels, Venting Components and
and intake. Engine cover does not need to be removed. Fasteners. Will not work with stock air cleaner system.
Will not work with 3.5L or 6.1L vehicles. 2011–2018, Challenger, 5.7L only, P/N 82214854 . . . . . . . . . .$558.00
2010, Challenger, 5.7L only, P/N 82212435AB . . . . . . . . . . . $540.00
Mopar® T/A Hood with Integrated Scoop
STEP3 STEP2
12 DODGE CHALLENGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
i
B
BEEFFO
ORRE
E:: P
PRRO
ODDU
UCCT
TIIO
ONN A F T E R : M O P A R ®- E Q U I P P E D
2011–2018 CHALLENGER 5.7L/6.4L
SHAKER HOOD PERFORMANCE ENHANCER
STEP3
Upgrade Tube for Vehicles Equipped
with Shaker Hoods
2011–2016, Challenger, 6.4L, P/N 2 77072381 . . . . . . . . $234.00
M O PA R . C O M 13
WHEELS
LIGHTWEIGHT PERFORMANCE WHEEL
20"x9"x18.5mm Granite Crystal Painted, Lightweight Forged Aluminum Performance Wheel offers up to
an 8 lb. weight savings per factory wheel and features "MOPAR" and "LIGHTWEIGHT" embossing.
2015-2018, Challenger, P/N 77070063AC (Fig. k). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $671.00
14 DODGE CHALLENGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
BRAKES
PERFORMANCE UPGRADE
PAD AND ROTOR KIT
Mopar® front and rear pads and rotors improve performance in
cold and wet weather. Features include slotted rotors to continuously
prevent glazing and improve initial bite, OEM-sized rotors allow
retention of existing factory calipers, black e-coated rotor hats
meet FCA US LLC standards for durability and corrosion resistance, and
high MOT (Max Operating Temperature) friction material to reduce fade.
2015-2018, Challenger, RWD, P/N P5160048. . . . . . . . . . . . . . . $550.00
Note: Fits vehicles with BR5 and BR6.
Note: Upgrade requires 20"x8" or larger wheels. Fits vehicles with BR5 and BR6.
M O PA R . C O M 15
n
STAGE PACKAGES
STAGE PERFORMANCE PACKAGES
Three Stage Performance Packages offer a range of horsepower and torque improvements for your 5.7L HEMI® engine-powered Challenger. Start with
Stage 1, which includes a cold air kit, cat-back exhaust and recalibrated powertrain control module. Move to Stage 2, which includes a camshaft, valve
springs, tie bar kit, heavy-duty pushrods, and an upper and lower gasket set. Stage 3 comes with new CNC-ported high-flow cylinder heads, gasket
set, 6.4 Apache (SRT®) exhaust manifolds and catalyst, mounting brackets and hardware. Must have Stage 1 and 2 Packages to install Stage 3 Package.
Stage Packages 1, 2 and 3 come with badges for Challenger models. All Stage 1 Kits give up to an additional 20 hp and 23 lb.-ft. of torque for Manual and
Automatic Transmissions.
*Federal law, and many state, provincial and local laws impose vehicle emissions and safety standards that prohibit the use of a motor vehicle on public
streets and highways if the vehicle is not compliant with such standards. FCA US LLC customers are responsible for complying with applicable federal, state,
provincial and local laws, including environmental and safety laws, and for determining whether their modified vehicle complies with such laws. Vehicles with
16 DODGE CHALLENGER Stage Pack 2 and 3 Performance Packages installed are prohibited from operating on public streets and highways.
BEE-LIEVER PACKAGES
The Bee-Liever packages contain all the components of Stage 1, 2 and 3
Kits except the power control module (PCM). The Bee-Liever packages will
only contain the Stage 3 badges.
Stage 1 Calibration
2013 Challenger, P/N P5160021 (Fig. p) . . . . . . . . . . . . . . . . . $646.00
Stage 1 Calibration
2014 Challenger, P/N P5160024 . . . . . . . . . . . . . . . . . . . . . . $646.00
Stage 1 Calibration
2015-2016 Challenger, P/N P5160025 . . . . . . . . . . . . . . . . . . $646.00
FILTER
PERFORMANCE OIL FILTER
Don’t use anything other than a factory-engineered Mopar® oil filter for
your Challenger. Superior filtration and particulate trapping. Hard case for
durable performance.
Mopar® Performance Oil Filter
2011-2018, Challenger, 5.7L
P/N 05038041AA (Fig. q) . . . . . . . . . . . . . . . . . . . . . . . . . . $15.45
q
M O PA R . C O M 17
Tell the rest of the road to “Get out of the way” like no other
sedan can. It’s pure muscle coming through. Take your high-
performance Charger even higher with bolt-on suspension
options to boost your handling dynamics or add even more
attitude in the form of torque gains and the sweet sound of
extra horsepower. And we’re just getting started. Once you
upgrade your Charger with this lineup of performance parts,
putting the pedal to the metal will never be the same.
18 P E R F O R M A N C E PA R T S C ATA L O G
Air Induction Systems 20
Exhaust Systems 20
Brakes 21
Wheels 21
Suspension Upgrades
and Components 22
Stage Packages 24
Bee-Liever Packages 25
Powertrain Control
Modules 25
Filter 25
M O PA R . C O M 19
AIR INDUCTION SYSTEMS
COLD AIR INTAKE SYSTEMS COLD AIR INTAKE REPLACEMENT FILTERS
Heat up your ride with a steady flow of cold air! This bolt-on Replacement air filter for 5.7L & 6.4L Cold Air Intake Kits
system is designed to allow cooler outside air through a directional 2011-2018, Charger, P/N 68198995AA . . . . . . . . . . . . . . . . . . . $73.00
cone filter and funnel directly into the intake manifold. This kit Note: P/N 68198995AA for use with P/N 77070043, P/N 77070043AB,
provides noticeable horsepower and torque gains under varying P/N 77070044, and P/N 77070044AB.
atmospheric conditions. Kit includes all mounting hardware and a Replacement air filter for 3.6L Cold Air Intake Kits
dry media, washable/reusable filter. (Do not oil.) 2011-2018, Charger, P/N 68198996AA . . . . . . . . . . . . . . . . . . . $73.00
Note: P/N 68198996AA for use with P/N 77070045, and
P/N 77070045AB.
Cold Air Intake System,
2005-2010, Charger SRT®, 6.1L, Replacement Air Filter for 6.1L Cold Air Intake Kits- Dry Media
P/N 77060006AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $412.00 2008–2010, Charger, P/N 77070010 . . . . . . . . . . . . . . . . . . . . $64.00
Cold Air Intake System, Dry Media, Note: P/N 77070010 for use on P/N 77070029 and P/N 77070032
2008-2010, Charger, 3.5L, P/N 77070032 . . . . . . . . . . . . . . . . $382.00 Replacement Air Filter for 3.5L, 5.7L & 6.1L Cold Air Intake Kits
Cold Air Intake System, Long Ram, 2008-2010, Charger, P/N 77070038 . . . . . . . . . . . . . . . . . . . . $59.00
2004-2010, Charger, 5.7L/6.1L, P/N 77070029 . . . . . . . . . . . . . . $382.00 Note: P/N 77070038 for use with P/N 77070029(5.7L/6.1L), and 77070032(3.5L)
Cold Air Intake System, Replacement Air Filter for 5.7L & 6.4L Cold Air Intake Kits
2004-2010, Charger, 5.7L, P/N 77060003AC . . . . . . . . . . . . . . $408.00 2011-2018, Charger, P/N 68256672AA . . . . . . . . . . . . . . . . . . . $73.00
Cold Air Intake System, Note: P/N 68256672AA for use with P/N 77070043AC, P/N 77070044AC,
P/N 77070044AD, P/N 77070023AC, and P/N 68239826AA (Shaker) all
2011-2016, Charger, 6.4L, P/N 77070043AC . . . . . . . . . . . . . . . $423.00
with plastic filter adapter
Cold Air Intake System,
2011-2016, Charger, 5.7L, P/N 77070044AD . . . . . . . . . . . . . . . $480.00
EXHAUST SYSTEMS
CAT-BACK EXHAUST SYSTEMS
This bolt-on system features T304 stainless steel construction (aircraft-
quality) with mandrel-bent tubing, stainless band (Torca) clamps and
polished tips. Rigorously tested and made to fit your exact vehicle, this
free-flow system provides horsepower and torque gains, while giving your
Charger a deeper exhaust tone, without unwanted drone.
20 DODGE CHARGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
BRAKES
PERFORMANCE UPGRADE
PAD AND ROTOR KIT
Mopar® front and rear pads and rotors improve performance in cold and wet weather.
Features include slotted rotors to continuously prevent glazing and improve initial bite,
OEM-sized rotors allow retention of existing factory calipers, black e-coated rotor hats
meet FCA US LLC standards for durability and corrosion resistance, and high MOT
(Max Operating Temperature) friction material to reduce fade.
2015-2018, Charger, RWD R/T, P/N P5160048 . . . . . . . . . . . . . . . . . . . $550.00
Note: Fits vehicles with BR5.
Includes front rotors, pads, calipers, brake hoses, dust shields and mounting hardware.
Features include larger 14.6" (370mm) single-piece cast rotors (vs. 13.6"/345mm),
improved fade resistance, increased caliper piston size to 2 piston x 45mm (vs. 2x
42mm), increased front effective radius to 152.2 (vs. 148.2) and decreased stopping
distance over stock. Same as Charger Pursuit brake package.
Note: Upgrade requires 20"x8" or larger wheels. Fits vehicles with BR5 and BR6.
WHEELS c
M O PA R . C O M 21
d
SUSPENSION UPGRADES
AND COMPONENTS
STAGE 1 PERFORMANCE SPRINGS STAGE 3 COIL-OVER LOWERING KIT
These performance springs are for Charger owners This coil-over damper kit will lower your Charger
who desire a sporty yet comfortable ride. They reduce by 1.25", while lowering center of gravity and
ride height 1.0" for that low, custom look. The high tensile increasing stability when cornering. Preserves ride
spring material ensures durability. Set of four. quality. Set of four and all applicable hardware.
2005-2018, Charger, 5.7L, RWD 2011-2018, Charger, P/N P5155942 . . . . . . . . . . . . . . . . . $1,870.00
P/N P4510854 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $316.00
Note: Excludes Sales Codes SMC and SER. . . . . . . . . . . . . . . . . . . . . . .
Note: Excludes Sales Codes SMC (Adaptive Dampening Suspension)
and SER (Ride Adjustment).
22 DODGE CHARGER Prices shown are MSRP, do not include installation or taxes and are subject to change.
e
f g
M O PA R . C O M 23
STAGE PACKAGES
STAGE PERFORMANCE PACKAGES
Three Stage Performance Packages offer a range of horsepower and torque improvements for your 5.7L HEMI® engine-
powered Charger. Start with Stage 1, which includes a cold air kit, cat-back exhaust and recalibrated powertrain control
module. Move to Stage 2, which includes a camshaft, valve springs, tie bar kit, heavy-duty pushrods and an upper and lower
gasket set. Stage 3 comes with new CNC-ported high-flow cylinder heads, gasket set, 6.4 Apache (SRT®) exhaust manifolds
and catalyst, mounting brackets and hardware. Must have Stage 1 and 2 Packages to install Stage 3 Package. Stage 1, 2 and
3 come with badges for Charger models. All Stage 1 Kits give up to an additional 20 hp and 23 lb.-ft. of torque for Manual
and Automatic Transmissions.
Prices shown are MSRP, do not include installation or taxes and are subject to change.
*Federal law, and many state, provincial and local laws impose vehicle emissions and safety standards that prohibit the use of a motor vehicle on public
streets and highways if the vehicle is not compliant with such standards. FCA US LLC customers are responsible for complying with applicable federal, state,
provincial and local laws, including environmental and safety laws, and for determining whether their modified vehicle complies with such laws.
24 DODGE CHARGER Vehicles with Stage Pack 2 and 3 Performance Packages installed are prohibited from operating on public streets and highways.
BEE-LIEVER PACKAGES
The Bee-Liever packages contain all the components of Stage 1, 2
and 3 Kits except the power control module (PCM). The Bee-Liever
packages will only contain the Stage 3 badges.
Bee-Liever Package
2015-2016 Charger P/N 77072334AB . . . . . . . . . . . . . . . . . . $7,995.00
Bee-Liever Package
2011-2014 Charger P/N 77072323AB . . . . . . . . . . . . . . . . . . . $7,995.00
Stage 1 Calibration
2014 Charger, P/N P5160023 . . . . . . . . . . . . . . . . . . . . . . . . $646.00
Stage 1 Calibration
2015-2016 Charger, P/N P5160025 . . . . . . . . . . . . . . . . . . . . . $646.00
FILTER
PERFORMANCE OIL FILTER
Why use anything other than a factory-engineered Mopar®
oil filter for your Charger? Superior filtration and particulate
trapping. Hard case for durable performance.
k
Mopar® Performance Oil Filter
2011-2018 Charger, P/N 05038041AA (Fig. k) . . . . . $15.85
M O PA R . C O M 25
Your Durango doesn’t play by the rules and neither should you. A
muscle car disguised in an SUV’s body, you can equip your Durango
with the performance parts you need to perfect your drive and
your style. With horsepower gains to maximize your towing ability
when you’re in it for the long haul or improved suspension for
unbelievable handling to deal with life’s twists and turns, Mopar®
gives you the power to push your Durango to the limits. Peak
performance is in your future.
26 P E R F O R M A N C E PA R T S C ATA L O G
Air Induction 28
Exhaust Systems 29
Suspension Upgrades 29
M O PA R . C O M 27
a
AIR INDUCTION
Heat up your ride with a steady flow of cold air! This bolt-on system is designed to allow cooler outside air through a directional cone filter
and funnel directly into the intake manifold. This kit provides noticeable horsepower and torque gains under varying atmospheric conditions.
Kit includes all mounting hardware and a dry media, washable/reusable filter. (Do not oil.) (See representative image Fig. a.)
28 DODGE DURANGO Prices shown are MSRP, do not include installation or taxes and are subject to change.
b
EXHAUST SYSTEMS
These bolt-on systems feature T304 stainless steel
construction (aircraft-quality) with mandrel-bent tubing,
stainless band (Torca) clamps and polished tips. Rigorously
tested and made to fit your exact vehicle, these free-flow
systems provide horsepower and torque gains, improved
fuel economy and give your Durango a deeper exhaust tone
without causing unwanted drone.
HIGH-PERFORMAMCE CAT-BACK
EXHAUST SYSTEM
Systems include polished tips and all necessary hardware.
2018, Dodge Durango SRT®, P/N 77072487 (Fig. b) . . . . $1.850.00
SUSPENSION UPGRADES
HIGH-PERFORMANCE LOWERING SPRINGS
Mopar® designed performance springs for a more controlled ride and a 1-inch
(25mm) lower stance. Includes 4 coil springs, new jounce bumpers and all
necessary hardware.
2018, Dodge Durango SRT®, P/N 77072488 (Fig. c) . . . . . . . . . . . . . . . . . . . .$325.00
M O PA R . C O M 29
30 P E R F O R M A N C E PA R T S C ATA L O G
32
No matter what reason you drive a Dodge Dart—its streamlined
design, its integrated technology or its fuel economy—you can add Air Induction Systems
performance to that list. Aerodynamic accessories lower your Dart’s
coefficient of drag and ups your style. A win-win. Your Dart is sporty,
but with bigger brakes and a high-performance exhaust system, it
can become the unexpected head turner in your neighborhood. With
Exhaust Systems 32
Mopar®, you’ll get more performance and more power. And in the end,
33
that means more fun—whenever and wherever you go. Performance Hood
and Venting
Aerodynamics 34
Brakes 35
Suspension Upgrades 35
Wheels 35
M O PA R . C O M 31
a
EXHAUST SYSTEMS
DART PERFORMANCE EXHAUST SYSTEMS
Add more power and an authoritative exhaust note to your 2013-2016 Dodge
Dart, equipped with either of the available 1.4L MultiAir ® or 2.4L Tigershark ® four-
cylinder engines, by adding a performance exhaust system. Featuring mandrel-
bent tubular pipes with an increased diameter over stock and a cat-back unit that
will lower back pressure, increase performance and turn heads on the street.
Note: Requires factory-installed Dual-Exhaust rear valence.
Exhaust System
2013-2017 Dart, 1.4L, P/N P5156280 (Fig. b) . . . . . . . . . . . . . . . . . . $995.00
Exhaust System b
2013-2017 Dart, 2.4L, P/N P5156165 . . . . . . . . . . . . . . . . . . . . . . . $1,195.00
32 DODGE DART Prices shown are MSRP, do not include installation or taxes and are subject to change.
c
M O PA R . C O M 33
AERODYNAMICS
LOWER FRONT CHIN SPOILER
Improve the appearance and aerodynamic efficiency of your Dart by
adding a front lower chin spoiler. Diverting air from under the car can
actually improve fuel efficiency by reducing aerodynamic drag. The
spoiler adds downforce at speed, which actually improves vehicle
stability while adding a sporty design to your Dart.
2013-2017, Dart, P/N 82213090 (Fig. d) . . . . . . . . . . . . . . . . . . . . . .$196.00
f
d
34 DODGE DART Prices shown are MSRP, do not include installation or taxes and are subject to change.
BRAKES
PERFORMANCE BRAKE UPGRADE STAGE 1 PAD AND ROTOR KIT
This brake upgrade kit gives your Dart more stopping power and increases resistance to
fade under extreme circumstances, such as sustained track day high-performance driving
or use in high-altitude conditions. Upgraded rotors are more resistant to corrosion and
high-temperature warp or flex. Upgraded pad material provides added friction with firm and
communicative brake pedal feel.
Front Brakes
2013-2017, Dart, P/N P5156166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $300.00
Rear Brakes g
2013-2017, Dart, P/N P5160016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $205.00
SUSPENSION UPGRADES
PERFORMANCE SUSPENSION
The Mopar® high-performance coil-over suspension is specially designed to match the performance
of the Dart. Springs and dampers were tuned by Mopar® engineers to improve handling, turn-in
response and cornering grip. Suspension lowers ride height 10mm on average (front height is
adjustable).
2013-2017, Dart, P/N 7072346AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,695.00
WHEELS
These Satin-finished 18" Forged Aluminum Alloy Wheels provide your Dart with
less unsprung weight to improve handling and increase grip by accommodating
lower-aspect ratio, high-performance tires. The black satin finish stays clean and
is highly resistant to brake pad dust residue. Kit includes wheel and center cap.
36 P E R F O R M A N C E PA R T S C ATA L O G
Brakes 38
Suspension
and Steering 39
Wheels 39
M O PA R . C O M 37
BRAKES
BRAKE ROTORS
The Viper SRT10® benchmark brake system was taken to the next level for the 2008 Dodge Viper SRT10® ACR. StopTech
two-piece, slotted, lightweight rotors combine with standard Viper SRT10® Brembo calipers to reduce rotating inertia and
unsprung mass, improve brake cooling and significantly reduce fade even under extreme conditions. The StopTech rotors
feature a patented curved fin design, a key element in improving brake cooling. The StopTech brake rotors, the Michelin Pilot
Sport Cup Tires and Sidewinder lightweight wheels combine to reduce 60 pounds of unsprung, rotating mass. The 2008
Dodge Viper SRT10® ACR stops from 60 mph in less than 100 feet.
1
Not legal on pollution-controlled vehicles or registered for highway use.
38 DODGE VIPER Prices shown are MSRP, do not include installation or taxes and are subject to change.
SUSPENSION AND
STEERING
For the ultimate in Viper handling dynamics and precise
control, add this front strut brace, a carbon fiber cross-car
X-brace that ties strut towers together for sharper steering
and increased chassis stiffness. Ideal for the ultimate
performance enthusiast looking for the absolute best in
handling and chassis rigidity.
WHEELS
These Hyper black wheels look great while reducing
unsprung weight to improve handling. Please note differing
sizes, front to rear.
Front Wheel
2003-2017, Viper, P/N 82213449 . . . . . . . . . . . $864.00
M O PA R . C O M 39
Luxury, redefined. Performance, amplified. Make a statement on
the street with your Chrysler 300 by adding a deeper tone with our
cat-back exhaust systems or enhance your handling dynamics with
bolt-on suspension parts. The Chrysler 300 is bold, but with Mopar®,
you can always be bolder. By increasing your car’s performance with
extra horsepower or upgrading the brakes, get used to people staring.
They’ve never seen a 300 perform like this before, and you’ve never
driven one that could—until now.
40 P E R F O R M A N C E PA R T S C ATA L O G
Air Induction Systems 42
Exhaust Systems 42
Filter 43
Suspension Upgrades
and Components 44
Stage Performance
Packages 46
Brakes 47
Powertrain Control
Modules 47
M O PA R . C O M 41
AIR INDUCTION SYSTEMS
COLD AIR INTAKE SYSTEMS COLD AIR INTAKE REPLACEMENT FILTERS
Heat up your ride with a steady flow of cold air! This bolt-on Replacement Air Filter for 5.7L & 6.4L Cold Air Intake Kits
system is designed to allow cooler outside air through a directional 2011-2018, 300, P/N 68198995AA . . . . . . . . . . . . . . . . . . . . . $73.00
cone filter to funnel directly into the intake manifold. This kit provides Note: P/N 68198995AA for use with P/N 77070043, P/N 77070043AB,
P/N 77070044, and P/N 77070044AB.
noticeable horsepower and torque gains under varying atmospheric
conditions. Kit includes all mounting hardware and a dry media, Replacement Air Filter for 3.6L Cold Air Intake Kits
washable/reusable filter. (Do not oil.) 2011-2018, 300, P/N 68198996AA . . . . . . . . . . . . . . . . . . . . . $73.00
Cold Air Intake System Note: P/N 68198996AA for use with P/N 77070045, and
P/N 77070045AB.
2004-2006, 300, 5.7L, P/N 77060003AC . . . . . . . . . . . . . . . . $408.00
Replacement Air Filter for 6.1L Cold Air Intake Kits- Dry Media
Cold Air Intake System
2008-2010, 300, P/N 77070010 . . . . . . . . . . . . . . . . . . . . . . . $64.00
2005-2006, 300, 6.1L, P/N 77060006AB (Fig. a) . . . . . . . . . . . . . $412.00
Note: P/N 77070010 for use on P/N 77070029 and P/N 77070032
Cold Air Intake System, Dry Media
Replacement Air Filter for 3.5L, 5.7L & 6.1L Cold Air Intake Kits
2008-2010, 300, V6, P/N 77070032 . . . . . . . . . . . . . . . . . . . $382.00
2008-2010, 300, P/N 77070038 . . . . . . . . . . . . . . . . . . . . . . . $59.00
Cold Air Intake System
Note: P/N 77070038 for use with P/N 77070029(5.7L/6.1L), and 77070032(3.5L)
2005-2006, 300, 3.5L, P/N 77060019AB . . . . . . . . . . . . . . . . .$407.00
Replacement Air Filter for 5.7L & 6.4L Cold Air Intake Kits
Cold Air Intake System, Long Ram
2011-2018, 300, P/N 68256672AA . . . . . . . . . . . . . . . . . . . . . $73.00
2008-2010, 300, 5.7L/6.1L P/N 77070029 . . . . . . . . . . . . . . . . $382.00
Note: P/N 68256672AA for use with P/N 77070043AC, P/N 77070044AC,
Cold Air Intake System P/N 77070044AD, P/N 77070023AC, and P/N 68239826AA (Shaker) all
2011-2016, 300, 6.4L, P/N 77070043AC . . . . . . . . . . . . . . . . . $423.00 with plastic filter adapter
b EXHAUST SYSTEMS
CAT-BACK EXHAUST SYSTEMS
Features T304 stainless steel construction (aircraft quality)
with mandrel-bent tubing, stainless band (Torca) clamps and
polished tips. Free-flow system provides horsepower and
torque gains, while giving your 300 a deeper exhaust tone,
without unwanted drone.
Cat-Back Exhaust System
2011-2014 (2013-2014 are w/o NZG), 300, 3.6L
P/N P5156148 (Fig. b) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,450.00
42 C H RYS L E R 3 0 0 Prices shown are MSRP, do not include installation or taxes and are subject to change.
a
FILTER
PERFORMANCE OIL FILTER
Why use anything other than a factory-engineered Mopar®
oil filter for your 300? Superior filtration and particulate
trapping. Hard case for durable performance.
Mopar® Performance Oil Filter
2011-2018, 300, 5.7L, P/N 05038041AA (Fig. c) . . . . $15.85
c M O PA R . C O M 43
SUSPENSION UPGRADES
AND COMPONENTS
STAGE 1 PERFORMANCE SPRINGS
These performance springs are for 300 owners who desire a sporty
yet comfortable ride. They reduce ride height 1.0" for that low,
custom look. The high-tensile spring material ensures durability.
Set of four.
44 C H RYS L E R 3 0 0 Prices shown are MSRP, do not include installation or taxes and are subject to change.
f
M O PA R . C O M 45
h
STAGE PACKAGES
STAGE PERFORMANCE PACKAGES 5.7L HEMI® Engine, Stage 1 Kit
Three Performance Packages offer a range of horsepower and torque 2013 300, P/N 77072330 (Fig. h) . . . . . . . . . . . . . . . . . . . . $2,495.00
improvements for your 5.7L HEMI® engine-powered Chrysler 300. Start 5.7L HEMI® Engine, Stage 1 Kit
with Stage 1, which includes a cold air kit, cat-back exhaust and recalibrated 2014 300, P/N 77072305. . . . . . . . . . . . . . . . . . . . . . . . . .$2,415.00
powertrain control module. Move to Stage 2, which includes a camshaft,
5.7L HEMI® Engine, Stage 1 Kit
valve springs, tie bar kit, heavy-duty pushrods and an upper and lower gasket
set. Stage 3 includes new CNC-ported high-flow cylinder heads, gasket set, 2015-2016, P/N 77072338 . . . . . . . . . . . . . . . . . . . . . . . . .$2,415.00
6.4 Apache (SRT®) exhaust manifolds and catalyst, mounting brackets and *5.7L HEMI® Engine, Stage 2 Kit
hardware. Must have Stage 1 and 2 Packages to install Stage 3 Package. 2011-2017 300, P/N 77072315AB . . . . . . . . . . . . . . . . . . . . $1,895.00
Stage Packages 1, 2 and 3 for the Chrysler 300 do not come with badges.
Note: Up to an additional 56 hp and 30 lb.-ft. of torque gains for
All Stage 1 Kits give up to an additional 20 hp and 23 lb.-ft. of torque for Manual and Automatic Transmissions.
Manual and Automatic Transmissions.
*5.7L HEMI® Engine, Stage 3 Kit
Note: to see images of Stage 2 & 3 kits, see pages 16 and 24.
2011-2017 300, P/N 77072312AB . . . . . . . . . . . . . . . . . . . . $4,495.00
Note: Up to an additional 75 hp and 44 lb.-ft. of torque gains for
Manual and Automatic Transmissions.
Prices shown are MSRP, do not include installation or taxes and are subject to change.
*Federal law, and many state, provincial and local laws impose vehicle emissions and safety standards that prohibit the use of a motor vehicle on public
streets and highways if the vehicle is not compliant with such standards. FCA US LLC customers are responsible for complying with applicable federal, state,
provincial and local laws, including environmental and safety laws, and for determining whether their modified vehicle complies with such laws. Vehicles with
46 C H RYS L E R 3 0 0 Stage Pack 2 and 3 Performance Packages installed are prohibited from operating on public streets and highways.
i
BRAKES
j
PERFORMANCE UPGRADE PAD AND ROTOR KIT
Mopar® front and rear pads and rotors improve performance in cold and wet weather.
Features include slotted rotors to continuously prevent glazing and improve initial bite,
OEM-sized rotors allow retention of existing factory calipers, black e-coated rotor hats
meet FCA US LLC standards for durability and corrosion resistance, and high MOT
(Max Operating Temperature) friction material to reduce fade.
2015-2018, 300, P/N P5160048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $550.00
Note: Fits vehicles with BR5. Does not fit 300 SRT®.
Note: Upgrade requires 20"x8" or larger wheels. Fits vehicles with BR5 and BR6. Does not fit 300 SRT®.
POWERTRAIN
CONTROL MODULES
The Mopar® aftermarket powertrain control module for the 5.7L-equipped 300
has the Mopar® Stage 1 calibration for owners who may already have purchased
a Mopar® cold air intake and cat-back exhaust system. For owners seeking
custom engine packages to take their 300 to the next performance level, this
PCM can be third-party tuned to optimize engine operation.
Stage 1 Calibration
2013, 300, P/N P5160028 (Fig. k). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $646.00
Stage 1 Calibration
2014, 300, P/N P5160023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $646.00
Stage 1 Calibration
2015-2016, 300, P/N P5160025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $646.00 k
M O PA R . C O M 47
48 P E R F O R M A N C E PA R T S C ATA L O G
Air Induction Systems 50
Exhaust Systems 51
Suspension Upgrades
and Components 52
Leveling Kits 54
Wheels 55
You drive a Ram 1500 because it’s proven to be the go-to name when
you need to get things done. Now you can tackle those “things” with
a surge of extra power and unreal performance upgrades. You’ve got
big jobs to finish, heavy loads to haul, trailers to pull. We’ve got lift kits,
premium shocks, beadlock capable wheels—all the tough, long-lasting,
battle-tested performance parts you need to turn your truck into a
legend. Rethink what your Ram 1500 can do. Now go do it.
M O PA R . C O M 49
AIR INDUCTION SYSTEMS
COLD AIR INTAKE SYSTEMS
Heat up your engine with a steady flow of cold air! These bolt-on systems are designed to allow
cooler outside air through a directional cone filter directly into the intake manifold. They provide
noticeable horsepower and torque gains under varying atmospheric conditions. Kits include all
mounting hardware and a washable/reusable dry media filter. (Do not oil.)
50 RAM 1500 Prices shown are MSRP, do not include installation or taxes and are subject to change.
a
EXHAUST SYSTEMS
CAT-BACK EXHAUST SYSTEMS
These bolt-on systems feature heavy-wall 304 stainless steel tubing with true mandrel
bends, allowing for maximum flow and minimum back pressure. Low restriction,
aluminized case and a flow-through muffler with a 3.0" core produce a deep mellow
exhaust note. Includes straight through flow muffler.
M O PA R . C O M 51
d
SHOCK OPTIONS
Performance shock is a twin-tube, high-capacity hydraulic shock that features 10-stage velocity sensitive valving. White enamel finish; includes black
boot. Premium shocks, jointly tuned with Bilstein ®, allows you to realize the most performance gain. The seamless monotube body contains a patented
piston design and a high-pressure gas charge to quickly dissipate heat and minimize shock fade. Silver zinc-plated finish; includes black boot.
52 RAM 1500 Prices shown are MSRP, do not include installation or taxes and are subject to change.
*2" Lift Kit 3" Lift Kit
Includes Bilstein® Struts and Rear Shocks. Includes Premium Bilstein® Struts and Shocks.
Not applicable for TRX/Outdoorsman Trucks. Not applicable for Trucks with Air Suspension.
2012-2018, Ram 1500, 4WD (DS), P/N 1P5155797 (Fig. d) . . . . . . . $895.00 2012-2016, Ram 1500, 4WD (DS),
Outdoorsman only, P/N 1P5156108 . . . . . . . . . . . . . . . . . . . . $3,115.00
*4" Lift Kit
*4" Lift Kit
Includes Premium Bilstein® Struts and Shocks. Not applicable
for TRX/Outdoorsman Trucks or Trucks with Air Suspension. Includes Strut Spacers and Performance Rear Shocks.
Not applicable for TRX4 Trucks.
2012-2018, Ram 1500, 4WD (DS), P/N P5156106 (Fig. e) . . . . . . . $2,995.00
1
*Note: Excludes 3.0 Diesel engine option and/or trucks with sales code SER.
M O PA R . C O M 53
LEVELING KITS
Fits all cab and bed configurations (except TRX4 models).
Leveling kits raise the front of the Ram truck and eliminate the factory
"nose low" rake, to make room for tires 1" to 2" taller than stock.
Leveling Kit Features:
• Front lift, depending on application, is via either coil spacers, strut
spacers or new torsion bar keys, so factory springs are retained and
ride quality is unaffected
• Very economical
• Can use factory wheels and allows clearance for tires 1" to 2" taller
than stock
• Easy installation - most kits install in no more than a couple of hours.
Front end realignment is required
Prices shown are MSRP, do not include installation or taxes and are subject to change.
54 RAM 1500
WHEELS
BEADLOCK CAPABLE WHEEL
17" x 8" Beadlock Capable Wheel provides a backspacing of 4.4" (12mm offset). This wheel features dual bead seats. The
outer bead of the tire can be mounted in a DOT-approved inner location or in the outer location as a true beadlock with
purchase of Functional Lock Ring Kit. Rim is satin black with a silver ring. This wheel features a protected valve stem
design and meets all FCA US LLC standards for corrosion and load. This wheel has a 5" x 5.5" bolt pattern.
Requires Functional Lock Ring Kit for True Beadlock Capability.
Beadlock Capable Wheel
2009-2018, Ram (DS) 1500, P/N 82215593 (Fig. f) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $325.00
M O PA R . C O M 55
Heavy duty. Work ready. Badass. Unstoppable. When you think of your
Ram 2500 and 3500, you should know that when it comes to performance,
Mopar® is never satisfied—to build the best parts and longest-lasting trucks,
you can’t be. You need the highest quality—and that’s what Mopar® stands
for. Maximize the raw power of your Ram Heavy Duty with brutally tested,
OE-engineered performance parts, including coil spring lift kits and steering
stabilizers. Just when you thought your Ram Truck couldn’t possibly be
more capable, Mopar® delivers.
56 P E R F O R M A N C E PA R T S C ATA L O G
Winch & Mounting
Components 58
Leveling Kits 58
Lift Kits 59
Steering 59
M O PA R . C O M 57
b
WINCH
Electro-mechanical Warn winch with 12,000 lb. pulling capacity.
Includes steel rope (80' x 3/8" diameter), operated with remote
control (12' remote lead). Requires Winch Mounting Kit
P/N 82215110, sold separately.
2015-2018, Ram 2500/3500 P/N 82215109 (Fig. a) . . . $1,870.00
LEVELING KITS
Fits all cab and bed configurations, including Duallies. Leveling kits raise the front of the Ram Truck
and eliminate the factory "nose low" rake, to make room for tires 1" to 2" taller than stock. A 2" rear block
kit is offered for those who wish to retain the factory rake because of load hauling and towing.
Leveling Kit Features:
• Front lift is via coil spacers, so factory springs are retained and ride quality is unaffected
• Very economical
• Can use factory wheels and allows clearance for tires 1" to 2" taller than stock
• Easy installation - most kits install in no more than a couple of hours. Front end realignment
is required
• Ram 2500/3500 Rear Block Kit (P/N P5155452) includes two U-bolt sets to applicate both axle
types found in these pickups, plus brackets to prevent suspension over-compression.
58 RAM 2500/3500 Prices shown are MSRP, do not include installation or taxes and are subject to change.
LIFT KITS
4" Lift Kit
Includes Performance Shocks and Stabilizers.
2010-2013, Ram 2500, 2010-2012, Ram 3500,
LIFT KITS 4WD, Diesel 6.7L Engines
P/N 1P5155497 . . . . . . . . . . . . . . . . . . . . . . . . $2,435.00
New coil springs specifically rated for engine type are matched
with your choice of Performance Shocks (gas front/hydraulic rear) 4" Lift Kit
in a white enamel finish, or our Bilstein ® monotube high-pressure Includes Premium Bilstein® Shocks and Stabilizers.
gas shocks that feature a silver zinc finish. Includes a dual-steering 2010-2013, Ram 2500, 2010-2012, Ram 3500,
stabilizer kit with cylinders matched to your choice of lift kit shocks. 4WD, Diesel 6.7L Engines
P/N 1P5155496 . . . . . . . . . . . . . . . . . . . . . . . . $2,540.00
STEERING
STEERING STABILIZERS
These are some of the same units included with the Mopar® Brand Lift Kits. Fits trucks from stock height up to 4" of lift.
Available with Performance hydraulic cylinders, or Premium Bilstein ® gas cylinders.
Stabilizer Kit
2008 (from 03/01/08 - 2009 {DH/D1}), 2010-2012 (D2), 2010-2013 (DJ), Ram 2500/3500, 4WD
M O PA R . C O M 61
GAUGES
Mopar® Performance Gauges are created using race-proven
Auto Meter components and are now infused with superior
LED through-the-dial OE quality lighting, to provide at-a-glance
readings day or night.
FUEL LEVEL
(Representative image for Fuel Level Gauges: Fig. a)
OIL TEMPERATURE
BOOST VACUUM
a Boost Vacuum, Diesel, Full Sweep, Electronic
2 1/16", Range: 0-30 psi, Black Dial,
P/N 77060061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $251.00
62 PERFORMANCE GAUGES & LIGHTS Prices shown are MSRP, do not include installation or taxes and are subject to change.
OIL PRESSURE
(Representative image for Oil Pressure Gauges: Fig. b)
SPEEDOMETER
(Representative image for Speedometers: Fig. c)
PYROMETER
Pyrometer, Full Sweep, Electronic
c
2 1/16", Range: 0-1,600°F, Black Dial
P/N 77060047 . . . . . . . . . . . . . . . . . . . . . . $208.00
M O PA R . C O M 63
VOLTMETERS
(Representative image for Voltmeters: Fig. e)
COOLANT TEMPERATURE
TRANSMISSION TEMPERATURE f
Transmission Temperature, Full Sweep, Electronic
2 5/8", Range: 100-260°F, White Dial
P/N P5155885 . . . . . . . . . . . . . . . . . . . . . . $240.00
64 PERFORMANCE GAUGES & LIGHTS Prices shown are MSRP, do not include installation or taxes and are subject to change.
GUAGE PODS - TRIPLE
SPEEDOMETER COMPONENTS
GAUGE PODS
These Gauge Pods from Mopar® Performance are available for the
popular 2 1/16" gauges. Premium grade automotive ABS is formed
and trimmed to perfectly fit each application, giving a clean,
g
factory look. Easy installation with little or no modifications to the
vehicle’s interior. Not recommended for vehicles equipped with
an A-Pillar mounted air bag.
M O PA R . C O M 65
SILVERSTAR LIGHTING
SILVERSTAR HALOGEN LIGHTS
Headlight
SilverStar, 9004 P/N PL009004ST . . . . . . . . . . . . . . . . . .$22.75
Headlight
SilverStar, 9006 P/N PL009006ST . . . . . . . . . . . . . . . . . $25.90
Headlight
SilverStar, 9007 P/N PL009007ST . . . . . . . . . . . . . . . . . . $27.40
Headlight
SilverStar, 9006XS P/N PL9006XSST . . . . . . . . . . . . . . . $30.40
Headlight
Sealed Beam, Rectangular, SilverStar, H6054
P/N P00H6054ST. . . . . . . . . . . . . . . . . . . . . . . . . . . $30.95
Headlight
SilverStar, H13 P/N P0000H13ST . . . . . . . . . . . . . . . . . . . $27.40
Headlight
SilverStar, H7 P/N P00000H7ST . . . . . . . . . . . . . . . . . . .$24.75
Headlight
SilverStar, 9005 P/N P0009005ST . . . . . . . . . . . . . . . . . $25.90
Headlight
Sealed Beam, Round, SilverStar, H6024
P/N P0046024ST (Fig. i) . . . . . . . . . . . . . . . . . . . . . . $30.00
h Headlight
SilverStar, 9005XS
P/N P09005XSST . . . . . . . . . . . . . . . . . . . . . . . . . . . $30.40
Headlight
HID D2 P/N P0000HIDD2 . . . . . . . . . . . . . . . . . . . . . . . $170.00
Prices shown are MSRP, do not include installation or taxes and are subject to change.
ECOBRIGHT HALOGEN LIGHTS
The SilverStar Ultra series produce 20 percent more light than standard SilverStar Headlights.
This gives you 25 percent increased down road viewing, and an increased side road view.
(Representative image for SilverStar Ultra Halogen Lights: Fig. k)
M O PA R . C O M 69
MOPAR ® BASIC Mopar® Performance Parts with part numbers beginning with “P”
are sold “as-is” without warranty coverage of any kind by Mopar®
LIMITED WARRANTY
unless otherwise noted.
Except as noted below, Mopar® Parts and Magneti Marelli Offered
By Mopar® parts installed by an authorized FCA US LLC dealership,
including Chrysler, Dodge, Jeep ®, Ram, FIAT ® and Alfa Romeo
MOPAR ® PERFORMANCE PARTS
locations, are warranted against defects in workmanship or EMISSION STATEMENT &
materials for 24 months/unlimited miles for both parts and labor. LIMITED WARRANTY
Mopar® Parts sold wholesale to an automotive service facility
and installed by a professional technician are warranted against NOTICE
defects in workmanship or materials for 24 months/unlimited miles Federal and many state laws prohibit the removal, modification or
for parts and up to $150.00 in labor. Mopar® Parts and Magneti rendering inoperative of any part or element of design affecting
Marelli Offered By Mopar® parts sold over-the-counter for vehicle emissions or safety on motor vehicles used for transporting
owner or do-it-yourself installation are warranted against defects persons or property on a public street or highway. Violation
in workmanship or materials for 24 months/unlimited miles for may result in a fine of up to $32,000 or $32,500 per vehicle.
parts exchange only. Mechanical and/or electronic performance parts listed in this
catalog cannot be used on vehicles used on public streets
Mopar® Parts and Magneti Marelli Offered By Mopar® parts replaced or highways. These parts may be used only on vehicles used
on an FCA US LLC vehicle still covered by the FCA US LLC New solely in sanctioned off-highway events. No other applications
Vehicle Basic Limited Warranty are warranted for the remainder are intended or implied. Those parts that have been granted an
of the 3-Year/36,000-Mile New Vehicle Basic Limited Warranty, or exemption by the California Air Resources Board (CARB) or meet
for the Mopar® 24-Month Basic Limited Warranty from the original the EPA requirements of memorandum 1A are legal for highway
installation date, whichever is more favorable to the customer. use in California, New York and Massachusetts and are noted
as such.
The Mopar® Basic Limited Warranty covers the cost of towing a
vehicle to the nearest authorized FCA US LLC dealership if the NO PARTS WARRANTY – “AS IS”
failure of a covered part causes the vehicle to be inoperative. If a Mopar® Performance Parts with part numbers beginning with
Mopar® part or a Magneti Marelli Offered By Mopar® part is installed “P” are sold “as-is” without warranty coverage of any kind
in an FCA US LLC vehicle by an authorized FCA US LLC dealer, by Mopar® unless otherwise noted. Implied warranties, such
and if, while that part is still under warranty, it causes other parts as warranties of merchantability, are excluded. (An implied
to be damaged or to fail, those other parts will be repaired or warranty of merchantability means that the part is reasonably
replaced under warranty, regardless of whether the other parts fit for the general purpose for which it was sold.) The entire risk
were covered by an FCA US LLC warranty at the time of failure. as to quality and performance of such parts is with the buyer.
Should such parts prove defective following their purchase, the
These warranties are the only express warranties made by FCA buyer and not the manufacturer, distributor or retailer, assumes
US LLC for Mopar® Parts and Accessories and Magneti Marelli the entire cost of all necessary servicing or repair. Chrysler,
Offered By Mopar® parts. Except where prohibited by law, this Dodge, Jeep ® and Ram vehicle and parts warranties are voided
warranty is the sole and exclusive remedy. No person, including a if the vehicle or parts are used for competition. The addition of
dealer or employee of FCA US LLC or its affiliated corporations, performance parts does not by itself void a vehicle’s warranty.
has the authority to vary or change these warranties. However, added performance parts (parts not originally supplied
on the vehicle from the factory) are not covered by the vehicle’s
Mopar® Parts and Magneti Marelli Offered By Mopar® parts sold warranty, and any failure that they may cause is not covered by
with a separate manufacturer’s warranty are not eligible for the the vehicle’s warranty.
Mopar® warranty. Warranty information on these parts is provided
with the part or in its packaging. Examples include: Garmin Mopar® Limited Warranties do not cover any incidental or
navigation, TomTom navigation, Katzkin leather, Koss headphones, consequential damages connected with the failure of the part
truck bedliners, paint sealant and fabric protection. under warranty. Such damages include lost time, inconvenience,
the loss of the use of your vehicle, the cost of rental cars, gasoline,
EXCEPTIONS telephone, travel or lodging; the loss of personal or commercial
The following Mopar® products have time and mileage limitations, property; or the loss of revenue. Some states do not allow the
or warranty coverage that differs from the general coverage exclusion or limitation of incidental or consequential damages, so
described above: Mopar® Performance Parts. the above limitations or exclusions may not apply to you.
70 L I M I T E D WA R R A N T I E S
Your warranties can also be restricted by FCA US LLC, as set Those parts marked in this catalog with a superscript 1 before
forth in the New Vehicle Limited Warranty. If your New Vehicle the part number and appropriately marked on their packaging
Limited Warranty is restricted by FCA US LLC, coverage under may legally be used on a vehicle that is not operated on streets
your Mopar® Parts and Accessories Limited Warranties may also or highways and that lacks features customarily associated with
be restricted or denied. safe and practical highway use.
M O PA R . C O M 71
2018.1
©2017 FCA US LLC. All Rights Reserved. Chrysler, Dodge, Jeep, Ram, Mopar, SRT, 300C, 300S, 392 HEMI, ACR, Challenger, Charger, Charger Pursuit, Chrysler 300S, the Chrysler wing design, Dart, Durango,
the Hellcat design, HEMI, Neon, Outdoorsman, Quad Cab, R/T, Rebel, SRT-4, SRT-10, the SRT Hellcat design, Tigershark and Viper are registered trademarks and Challenger SRT Hellcat, the Ram Rebel vehicle
grille design, SRT Hellcat and TRX are trademarks of FCA US LLC. FIAT and ALFA ROMEO are registered trademarks of FCA Group Marketing S.p.A., used with permission.
All other trademarks are the property of their respective owners.