P7650A/B/U

DIFFERENTIAL PRESSURE SENSORS

SPECIFICATION DATA

• Duct static pressure (Pressure mode)

• Building or room pressure (Pressure mode)
• Filter status (Pressure mode)
• Air flow measurement (Velocity mode)

FEATURES
• Reduce field failures
• Excellent tolerance to overpressure & vibration
reduces field failures
APPLICATION • Reduce setup
• Selectable ranges and scales reduce setup time
The P7650 sensor can measure either air pressure or and number of models to stock
velocity. Measuring air velocity requires the use of the • High accuracy
P7650L velocity pick-up probe. The P7650 is available in • High accuracy digital sensor with seven
three installation configurations: duct, panel or universal. selectable sub-ranges maintains calibration
Duct and panel models have two pressure and velocity and reduces callbacks
options: 0-1” WC / 0-3,000 FPM or 1-10” WC / 3,000-
6,000 FPM with four field-selectable sub-ranges. • Water-resistant housing
• IP65/NEMA 4 housing allows for mounting in
The universal model comes in one pressure/velocity wash-down locations
range: 0-10” WC / 0-7,000 FPM with seven field- • Maintenance free
selectable sub-ranges. All variants are available with and
without display. The P7650 has an IP65/NEMA 4 • High reliability sensor technology for long-term,
environmental rating and a 5-year limited warranty. maintenance-free operation
• Circuit protection
• Circuit protection avoids damage due to
incorrect input wiring

PRODUCT IDENTIFICATION
Selectable w.c. Pressure Range, Supply
New Part Number Mounting Uni or Bi-Directional Velocity Mode Display Output Voltage
P7650A1000 +/-0-.1", 0-.25", 0-.5", 0-1" w.c. or 500/1,000/2,000/3,000 FPM Yes
P7650A1018 +/-25, 50, 100, 250 Pa Selectable 2.5/5/10/15MS No
P7650A1026 Panel +/-0-1", 0-2", 0-5", 0-10" or Yes
3,000/4,000/5,000/6,000 FPM
+/-0.250, 0.500, 1.00, 2.50 kPa
P7650A1034 15/20/25/30MS No
Selectable
P7650B1008 +/-0-.1", 0-.25", 0-.5", 0-1" w.c. or 500/1,000/2,000/3,000 FPM Yes
0-10Vdc, 0-5Vdc,
P7650B1016 +/-25, 50, 100, 250 Pa Selectable 2.5/5/10/15MS No 12-30Vdc
and 4-20mA
Duct or 24Vac
P7650B1024 +/-0-1", 0-2", 0-5", 0-10" or Yes Selectable
3,000/4,000/5,000/6,000 FPM
+/-0.250, 0.500, 1.00, 2.50 kPa
P7650B1032 15/20/25/30MS No
Selectable
P7650U1040 +/-0-.1", 0-.25", 0-.5", 0-1", 0-2", 0-5", No
500/1,000/2,000/3,000/4,000/
0-10" in. w.c. or
Universal 5,000/6,000/7,000 FPM
P7650U1052 +/-0.25, 0.5, 1.0, 2.5 kPa; or
2.5/5/10/15/20/25/30/35 MS Yes
+/-25, 50, 100, 250 Pa Selectable

50
31-00139-02
P7650A/B/U

SPECIFICATIONS Table 3. P7640U Universal Model, Field Selectable (P)

Pressure or (V) Velocity Mode, Field Selectable
(WC/FPM or Pa/MS).
GENERAL (P) Pressure Mode (V) Velocity Mode
Media Compatibility: Dry air or inert gas 0 0 to 0.1 in. WC 0 0 to 500 FPM
Input Power: (0 to 25 Pa) (0 to 2.5 MS)
Three-wire Volt mode: 24 Vac or 12-30 Vdc1 1 0 to 0.25 in. WC 1 0 to 1000 FPM
Two-wire mA mode: 12-30 Vdc1 (0 to 50 Pa) (0 to 5 MS)
Output Power: 2 0 to 0.5 in. WC 2 0 to 2000 FPM
Field-selectable: (0 to 100 Pa) (0 to 10 MS)
2-wire, loop-powered 4-20 mA2 (DC only, clipped and 3 0 to 1 in. WC 3 0 to 3000 FPM
capped), (0 to 250 Pa) (0 to 15 MS)
24 Vac/dc or
3-wire 0-5V/0-10V3 4 0 to 2.5 in. WC 4 0 to 4000 FPM
(0 to 500 Pa) (0 to 20 MS)
PRESSURE RANGES 5 0 to 5 in. WC 5 0 to 5000 FPM
(0 to 1000 Pa) (0 to 25 MS)
Table 1. 0-1 Inch Range Models, Field Selectable 6 0 to 10 in. WC 6 0 to 6000 FPM
(WC/FPM or Pa/MS). (0 to 2500 Pa) (0 to 30 MS)
WC / FPM Pa / MS 7 0 to 10 in. WC 7 0 to 7000 FPM
0 0 to 0.1 in. WC 0 0 to 25 Pa (0 to 2500 Pa) (0 to 35 MS)
1 0 to 0.25 in. WC 1 0 to 50 Pa
2 0 to 0.5 in. WC 2 0 to 100 Pa
SENSOR
3 0 to 1 in. WC 3 0 to 250 Pa Response Time:
Standard: T95 in 20 sec
4 0 to 500 FPM 4 0 to 2.5 ms Fast: T95 in 2 sec, DIP switch selectable
5 0 to 1000 FPM 5 0 to 5 ms Mode:
6 0 to 2000 FPM 6 0 to 10 ms Unidirectional or bidirectional, DIP switch selectable
7 0 to 3000 FPM 7 0 to 15 ms Display (option):
Pressure mode: Signed 3-1/2 digit LCD, indicates pres-
Table 2. 0-10 Inch Range Models, Field Selectable sure, overrange indicator
(WC/FPM or Pa/MS). Velocity mode: Signed 4-1/2 digit LCD, indicates veloc-
ity, overrange indicator
WC / FPM Pa / MS
Proof Pressure:
0 0 to 1 in. WC 0 0 to 250 Pa 3 psid (20.6 kPa)
1 0 to 2.5 in. WC 1 0 to 500 Pa Burst Pressure:
2 0 to 5 in. WC 2 0 to 1000 Pa 5 psid (34.5 kPa)
3 0 to 10 in. WC 3 0 to 2500 Pa Pressure Mode Accuracy:
±1% F.S. (combined linearity and hysteresis)
4 0 to 3000 FPM 4 0 to 15 ms
Velocity Mode Accuracy:
5 0 to 4000 FPM 5 0 to 20 ms ±90 FPM (±0.45 MS) plus 5% of measured value4
6 0 to 5000 FPM 6 0 to 25 ms Temperature Effect:
7 0 to 6000 FPM 7 0 to 30 ms 1” (250 Pa) models: 0.05%/°C; 10” (2.5 kPa) models:
0.01%/°C
(Relative to 25 °C) 0 to 50 °C (32 to 122 °F)
Zero Drift (1-year):
1” (250 Pa) models: 2.0% max.; 10” (2.5 kPa) models:
0.5% max.
Zero Adjust:
Pushbutton auto-zero and digital input (2-pos terminal
block)
Operating Environment:
0 to 60 °C (32 to 140 °F)
Altitude of Operation:
0 to 3000 m
Pollution Deg.:
2

31-00139—02 2
 P7650A/B/U

Humidity Range: WARRANTY

100% RH, non-condensing
Limited Warranty:
Mounting Location: 5 years
For indoor use only.
Fittings: AGENCY APPROVALS
Brass barb; 0.24” (6.1 mm) o.d.
CE
Environmental Rating: EMC Conformance: EN 61000-6-3:2007 and A1:2011
IP65, NEMA 4 Class B, EN 61000-6-1:2007
Flammability Rating:
Plastic enclosure is UL 94 5VA fire retardant ABS 1
Class 2 power source.
2
Accessories: Minimum input voltage for 4 to 20 mA operation: 250 Ω
32003169-001 4 in. Duct Pressure Pick-up Probe. loop = 12 Vdc; 500 Ω loop = 19 Vdc.
P7650L6, P7650L8, P7650L10, P7650L12, or P7650L14, 3
Minimum load resistance for Volt operation: 5 kΩ.
Velocity Pick-up Probes. (Last number is probe length, 4 For measured values between 200 and 7000 FPM (1 and
i.e., P7650L6 has 6 inch probe, etc) 35 MS).

WIRING DIAGRAMS

7 0
7 0 ZERO

1 2
ZERO

5 6
1 2
5 6

3
4
3 4

1.000
DIGITAL
OUTPUT
DIGITAL
1.000

{
CONTROL RMT. ZERO
{

RMT. V IN
ZERO –

DIGITAL

V+/PWR
V-/GND
VOUT
OUTPUT POWER –
PWR
mA RTN

DIGITAL SOURCE
CONTROL 24 VAC/DC
RETURN +

V+ M37263
M37262

Fig. 1. 2-wire, 4-20 mA Current Loop Output. Fig. 2. 3-wire, 0-5 V/0-10 V Voltage Output.

DIMENSIONS

1-19/32
(42)

3-1/2 (88)

3-3/32
(78)
19/64
4-13/32
(7)
(112)

7-13/32 (188)
M37264

Fig. 3. Dimensions in in. (mm).

3 31-00139—02
P7650A/B/U

REGULATORY INFORMATION
FCC REGULATIONS Operation is subject to the following two conditions:
1. This device may not cause interference; and
§ 15.19 (a)(3) 2. This device must accept any interference, including
interference that may cause undesired operation of
This device complies with part 15 of the FCC Rules.
the device.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
Le présent appareil est conforme aux CNR d’Industrie
2. This device must accept any interference received,
Canada applicables aux appareils radio exempts de
including interference that may cause undesired
licence. L’exploitation est autorisée aux deux conditions
operation.
suivantes :
1. l’appareil ne doit pas produire de brouillage;
IC REGULATIONS 2. l’utilisateur de l’appareil doit accepter tout brouil-
lage radioélectrique subi, même si le brouillage est
RSS-GEN susceptible d’en compromettre le fonctionnement.
This device complies with Industry Canada’s license-
exempt RSSs. FCC Warning (Part 15.21) (USA
only)
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or
modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any
liability, cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature by you.

Home and Building Technologies

In the U.S.:
Honeywell
715 Peachtree Street NE
® U.S. Registered Trademark
Atlanta, GA 30308 © 2018 Honeywell International Inc.
31-00139—02 M.S. Rev. 05-18
customer.honeywell.com Printed in United States