Teleprotection: Features and Applications

BTP-1000
TELEPROTECTION
FEATURES AND APPLICATIONS

BTP-1000
A reliable supply of electricity is only possible with the help of protection equipment in
TELEPROTECTION FOR conjunction with communication links. To avoid the power system failure and damage, the
HIGH-VOLTAGE NETWORKS teleprotection system allows to selectively identify the location of a fault on high-voltage
transmission lines, transformers and other items of electrical substations by transferring
Designed to be used in harsh substations command signals within the shortest possible time in a secure and dependable way.
environments, BTP-1000 is a cost-effective BTP-1000 enables the transmission of protection commands over different communication
teleprotection equipment for fast, reliable and channels, such as:
secure transmission of protection signals over • Optical fibers;
many kind of communication media in compliance
• Microwave radio links;
with international recommendation IEC 60834-1.
• Digital and analog links of optical networks;
• Copper wires;
• Power line carrier.
Channel coding and command detection algorithms ensure the optimal combinations of
transmission time, security and dependability in accordance with IEC 60834-1. BTP-1000
can be used in all protection schemes, such as direct tripping, permissive tripping and
blocking.
BTP-1000 supports the traditional hardwired interface between protection equipment
and teleprotection, based on contact type inputs and outputs, and the modern protection
interface based on the exchange of GOOSE messages according to the standard IEC 61850.
BTP-1000 enables up to two communication channels to protect against communication
path failures.
The complete configurability and modularity of BTP-1000 equipment adapts easily the device
to the protection systems requirements and to the media transmission characteristics.
Design production and maintenance of telecontrol equipments, special communications devices and industrial automation systems. Products built/customized
upon customer requests. Specific devices for smart grids.
www.tesmec.com PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE 01.16
BTP-1000 TECHNICAL SPECIFICATIONS
Other Features
• Analog interfaces: up to 4 independent commands in any combination • Single or redundant power supply;
or up to 16 commands with priority; • Alarms and events logging with time synchronization;
• Digital interfaces: up to 8 independent commands in any combination • Integrated trip counters;
or up to 256 commands with priority; • SNMP agent with standard and private MIBs;
• High programmability of commands parameters; • Secure management access;
• Set-reset commands (continuous commands); • Human Machine Interface (HMI) with built-in functions for easy
• Comprehensive self-test diagnostics; commissioning and maintenance.
Technical Specifications
Power supply 24/48/110/220 Vdc, ±20%, redundancy (as option)
Weight and Dimensions Up to 8 kg, 19-inch subrack, height: 6U
Standards compliance IEC 60834-1, IEC 61000-6-2, IEC 61000-6-4, IEC 60255-27
Analog interfaces: up to 4 independent commands in any combination or up to 16 commands with priority
Number of commands Digital interfaces: up to 8 independent commands in any combination or up to 256 commands with priority
Number of command cards Up to 8
Number of command inputs/ 4 command inputs + 8 command outputs + 1 alarm, inputs/outputs completely programmable
outputs for each card
Command inputs characteristics Opto-isolated contacts, nominal voltage from 24 Vdc to 250 Vdc, electrically isolated, polarity independence
Solid state relays, nominal voltage from 24 Vdc to 250 Vdc, maximum current up to 6 A (different mounted
Command outputs characteristics relays), electrically isolated
IEC 61850 support GOOSE interface to the protection, RJ45 electrical ethernet ports or SFP optical ethernet port
V.11 (32/64 kbps), G.703 (64 kbps co-directional), E1 (2 Mbps), SFP optical fibers (850/1310/1550 nm, MM/
Digital lines SM), optical IEEE C37.94
Analog lines 2/4-wire 600 Ω or high impedance, APLC/DPLC (embedded in BUPL-1000 PLC equipment)
Number of line interfaces Up to 2, simultaneously or in “hot back-up”
Dependability and security According to IEC 60834-1
Electro-mechanical relays, maximum current up to 5 A, normally closed and/or normally open free contacts,
Alarms
configurable alarm sources
Time synchronization NTP, IEEE 1588, IRIG-B
Events/alarms logging > 10000 events, non-volatile memory, trip counters
Management HMI, Web browser, SNMP, EOC, display (as option)
Applications
BTP-1000 collects vital information for
the protection of the electric power
grid and communicates to a remote
teleprotection equipment in order to
coordinate the protection devices for
fault location, transformers and other
items of electrical substations of high-
voltage transmission lines.
Headquarters: via Zanica, 17/O - 24050 Grassobbio (BG) - ITALY Tel:+39.05246.0129

Operating office: Fraz. Rimale Via Emilia Ovest 61 - 43036 Fidenza (PR) - ITALY E- Mail: [email protected]
www.tesmec.com PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE 01.16

Teleprotection: Features and Applications

Uploaded by

Copyright:

Available Formats

Teleprotection: Features and Applications

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Teleprotection: Features and Applications

Uploaded by

Copyright:

Available Formats

BTP-1000

FEATURES AND APPLICATIONS

Headquarters: via Zanica, 17/O - 24050 Grassobbio (BG) - ITALY Tel:+39.05246.0129

You might also like