AG-AC90P AG-AC90PJ AG-AC90PX: Operating Instructions

AG-AC90-VQT4M90_mst.
book 1 ページ２０１２年９月２５日　火曜日　午後１時１８分
Operating Instructions Vol.1
Memory Card Camera-Recorder

Model No. AG-AC90P
AG-AC90PJ
AG-AC90PX
Register now!!
This product is eligible for the
AVCCAM 3 Year Warranty
Repair Program.
For details, see page 10.
http://panasonic.biz/sav/pass_e/
Vol.1
Please read first
This document explains basic operations of the unit. For more detailed explanation, please refer
to “Operating Instructions Vol.2” (PDF file) which is recorded in the enclosed CD-ROM.
Please read these instructions carefully before using this product, and save this manual for future
use.
ENGLISH
F0912YK0 ( 1700 A )
Printed in Japan VQT4M90
until
2012/10/12
AG-AC90-VQT4M90_mst.book 2 ページ２０１２年９月２５日　火曜日　午後１時１８分
Information for Your Safety

WARNING:
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and
similar items.
≥ Do not place sources of naked flames, such as lighted candles, on this unit.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. and CANADA.

The following mark and symbols are located on bottom of units.
The lightning flash with arrowhead

symbol, within an equilateral
CAUTION triangle, is intended to alert the user
to the presence of uninsulated
RISK OF ELECTRIC SHOCK “dangerous voltage” within the
DO NOT OPEN product’s enclosure that may be of
sufficient magnitude to constitute a
CAUTION: TO REDUCE THE RISK OF ELECTRIC
risk of electric shock to persons.
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS The exclamation point within an
equilateral triangle is intended to
INSIDE.
alert the user to the presence of
REFER SERVICING TO QUALIFIED important operating and
SERVICE PERSONNEL. maintenance (servicing) instructions
in the literature accompanying the
appliance.
2
VQT4M90
FCC NOTICE (USA)

Declaration of Conformity
Model Number: AG-AC90PJ
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support contact: 1-800-524-1448
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make
any unauthorized modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference”
available from FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation
instructions and the user must use only shielded interface cables with ferrite core when
connecting to host computer or peripheral devices. Also, any unauthorized changes or
modifications to this equipment could void the user’s authority to operate this device.
NOTIFICATION (Canada)
This Class B digital apparatus complies with Canadian ICES-003.
indicates safety information.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
AG-AC90PJ
3
VQT4M90
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only.
≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit
the AC outlet configuration.
≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the
voltage of the AC supply and the rated current of the AC adaptor.
≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or
AC cord set.
Battery charger
This battery charger operates on AC between 100 V and 240 V.
But
≥ In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power supply
only.
≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit
the AC outlet configuration.
≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the
voltage of the AC supply and the rated current of the battery charger.
≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or
AC cord set.
Install this unit so that the power cord can be unplugged from the socket outlet immediately if any
problem occurs.
4
VQT4M90
∫ Concerning the battery
Batteries
1 Battery pack (Lithium ion battery pack)
≥ Use the specified unit to recharge the battery pack.
≥ Do not use the battery pack with equipment other than the specified unit.
≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.
≥ Do not touch the plug terminals (i and j) with metal objects.
≥ Do not disassemble, remodel, heat or throw into fire.
2 Button-type battery (Lithium battery)
≥ Insert with poles aligned.
≥ Do not touch the terminals (i and j) with metal objects.
≥ Do not recharge, disassemble, remodel, heat or throw into fire.
≥ Keep out of reach of children.
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with
water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes
thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble.
Do not heat the batteries above the following temperatures or incinerate.
Button-type battery 60 oC (140 oF)
Battery pack 60 oC (140 oF)
CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities or dealer and ask for the
correct method of disposal.
Warning
Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in
mouth. If swallowed call your doctor.
Button-type battery: CR2025
5
VQT4M90
∫ Product identification marking

Product Location
Memory Card Camera-Recorder Bottom
Battery charger Bottom
AC adaptor Bottom
U.S.A./CANADA CONSUMERS: ATTENTION:

A lithium ion battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
<For USA-California only>

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
-If you see this symbol-
Information on Disposal in other Countries outside the European Union

EU This symbol is only valid in the European Union.
If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct method
of disposal.
6
VQT4M90
IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on
the unit and the applicable safety instructions listed below. Keep these operating instructions handy
for future reference.
1) Read these instructions. 10) Protect the power cord from being walked
on or pinched particularly at plugs,
2) Keep these instructions. convenience receptacles, and the point
where they exit from the apparatus.
3) Heed all warnings.
11) Only use attachments/accessories
4) Follow all instructions. specified by the manufacturer.
5) Do not use this apparatus near water.

12) Use only with the
6) Clean only with dry cloth. cart, stand, tripod,
bracket, or table
7) Do not block any ventilation openings. specified by the
Install in accordance with the manufacturer, or
manufacturer’s instructions. sold with the
apparatus. When a
8) Do not install near any heat sources such cart is used, use caution when moving the
as radiators, heat registers, stoves, or cart/apparatus combination to avoid injury
other apparatus (including amplifiers) that from tip-over.
produce heat.
13) Unplug this apparatus during lightning
9) Do not defeat the safety purpose of the storms or when unused for long periods of
polarized or grounding-type plug. A time.
polarized plug has two blades with one
wider than the other. A grounding-type plug 14) Refer all servicing to qualified service
has two blades and a third grounding personnel. Servicing is required when the
prong. The wide blade or the third prong apparatus has been damaged in any way,
are provided for your safety. If the provided such as power-supply cord or plug is
plug does not fit into your outlet, consult an damaged, liquid has been spilled or objects
electrician for replacement of the obsolete have fallen into the apparatus, the
outlet. apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
7
VQT4M90
Brazil Only
Brasil Apenas
<Manuseio de baterias usadas>
Cobrir os terminais positivo (_) e negativo (`) com uma fita isolante adesiva, antes de depositar
numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar
vazamentos, gerar calor, romper a blindagem e produzir fogo.
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode
irritar a garganta, danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da
blindagem e produzir fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as
baterias, elas não podem ficar expostas a temperaturas superiores a 100oC (212oF). O gás liberado
pela bateria pode irritar a garganta, danificar o lacre do invólucro ou o vazamento provocar calor,
ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado
internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada
com bastante água. Caso haja irritação, consulte um médico.
Para remover a bateria

Bateria Principal de Energia Bateria do Controle Remoto
Pressione o botão para liberar a bateria. 1) Empurre a trava na direção exibida pela
seta A para remover o suporte.
2) Remova a bateria tipo botão do suporte

da bateria.
8
VQT4M90
∫ Cautions for use ∫ About the recording format for

Keep this unit as far away as possible from
recording motion pictures
electromagnetic equipment (such as
You can record motion pictures with AVCHD
microwave ovens, TVs, video games etc.).
recording formats using this unit. (l 30)
≥ If you use this unit on top of or near a TV, the
≥ AVCHD Progressive (1080/60p) supported.
pictures and/or sound on this unit may be
AVCHD Progressive:
disrupted by electromagnetic wave radiation.
It is possible to record video with highest quality
≥ Do not use this unit near cell phones because
(1080/60p) possible with this unit.
doing so may result in noise adversely
affecting the pictures and/or sound. ∫ Indemnity about recorded
≥ Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
content
created by speakers or large motors. Panasonic does not accept any responsibility
≥ Electromagnetic wave radiation generated by for damages directly or indirectly due to any
microprocessors may adversely affect this type of problems that result in loss of recording
unit, disturbing the pictures and/or sound. or edited content, and does not guarantee any
≥ If this unit is adversely affected by content if recording or editing does not work
electromagnetic equipment and stops properly. Likewise, the above also applies in a
functioning properly, turn this unit off and case where any type of repair is made to the
remove the battery or disconnect AC adaptor. unit.
Then reinsert the battery or reconnect AC ∫ About Condensation (When
adaptor and turn this unit on.
the lens or the LCD monitor is
Do not use this unit near radio transmitters fogged up)
or high-voltage lines.
Condensation occurs when there is a change in
≥ If you record near radio transmitters or
temperature or humidity, such as when the unit
high-voltage lines, the recorded pictures and/
is taken from outside or a cold room to a warm
or sound may be adversely affected.
room. Please be careful, as it may cause the
About connecting to a PC lens or LCD monitor to become soiled, moldy,
≥ Do not use any other USB cables except the or damaged.
supplied one. When taking the unit to a place which has a
different temperature, if the unit is accustomed
About using a headphone to the room temperature of the destination for
≥ Excessive sound pressure from earphones about one hour, condensation can be
and headphones can cause hearing loss. prevented. (When the difference in temperature
≥ Listening at full volume for long periods may is severe, place the unit in a plastic bag or the
damage the user’s ears. like, remove air from the bag, and seal the bag.)
About using external microphones When condensation has occurred, remove the
≥ Keep the microphone holder screw, battery and/or the AC adapter and leave the
microphone holder adaptor and INPUT unit like that for about one hour. When the unit
terminal cap out of reach of children to becomes accustomed to the surrounding
prevent swallowing. temperature, fogginess will disappear naturally.
About using wireless remote control ∫ Caution regarding laser beams

≥ Keep the button-type battery out of reach of ≥ The lens may suffer damage if struck by a
children to prevent swallowing. laser beam. Make sure that laser beams do
not strike the lens when shooting in an
environment where laser devices are used.
9
VQT4M90
∫ Cards that you can use with ∫ For the purposes of these
this unit operating instructions
SD Memory Card, SDHC Memory Card and ≥ The battery pack is referred to as the
SDXC Memory Card “Battery”.
≥ 4 GB or more Memory Cards that do not have ≥ SD Memory Card, SDHC Memory Card and
the SDHC logo or 48 GB or more Memory SDXC Memory Card are referred to as the
Cards that do not have the SDXC logo are “SD card”.
not based on SD Memory Card ≥ Function that can be used for Recording
Specifications. Mode:
≥ Refer to page 23 for more details on SD Function that can be used for Playback
cards. Mode:
≥ Pages for reference are indicated by an
arrow, for example: l 00
AVCCAM 3 Year Warranty Repair Program*1

Thank you for purchasing this Panasonic AVCCAM device.
Register as a user for this device to receive a special service warranty
up to three years of free warranty repairs.
Customers who register as users on the website will receive

an extended warranty repair valid for up to three years.
1st year 2nd year 3rd year
AVCCAM Extended warranty

device*2 Basic warranty*3 repair*4
*1: Please note that this extended warranty is not available in some countries/regions.
*2: Not all models eligible for extended warranty coverage. *3: The basic warranty period
may vary depending on the country/region. *4: Not all repair work is covered by this
extended warranty.
Purchase Register online “Registration Notice”

AVCCAM product within 1 month e-mail sent
Free 3 years of Warranty Repairs

Make sure to save the “Registration Notice” e-mail during the warranty period.
Details about user registration and the extended warranty:

http://panasonic.biz/sav/pass_e
Please note, this is a site that is not maintained by Panasonic Canada Inc. The Panasonic Canada
Inc. privacy policy does not apply and is not applicable in relation to any information submitted.
This link is provided to you for convenience.
10
VQT4M90
Contents
∫ How to open the Operating Instructions PDF file
When you insert the CD-ROM and open the [INDEX.pdf] in the CD-ROM, the Operating
Instructions list will be displayed. Click the document name of the Operating Instructions you
would like to open.
≥ Adobe Reader is required to view the PDF file. Please download it from the homepage of
Adobe Systems Incorporated.
Information for Your Safety......................2

Accessories.............................................12 Recording
Optional accessories......................... 13
Selecting a media to record................... 29
Preparation Recording motion pictures .................... 30
Recording still pictures.......................... 30
Names and Functions of Main Parts ..... 14 Using the zoom ....................................... 31
Power supply........................................... 19 Intelligent Auto Mode/Manual Mode ..... 31
Charging the battery ......................... 19 Manual Recording .................................. 32
Inserting/removing the battery........... 20 Focus ................................................ 32
Charging and recording time............. 21 White Balance................................... 32
Connecting to the AC outlet .............. 22 Iris adjustment .................................. 32
Preparation of SD cards .........................23 Manual shutter speed ....................... 33
Cards that you can use with USER button ........................................... 33
this unit.............................................. 23 Setting the USER button................... 33
Inserting/removing an SD card.......... 23 Using the USER button..................... 34
Turning the unit on/off............................24 Functions of the USER button .......... 34
Selecting a mode ....................................24
Using the LCD monitor/Viewfinder........25 Playback
Using the LCD monitor...................... 25
How to use the touch screen ............ 26 Motion picture/Still picture playback .... 35
Viewfinder adjustment....................... 26 Watching Video/
Setting date and time.............................. 27 Pictures on your TV .......................... 36
Using the menu screen .......................... 28
Formatting cards ............................... 29
Language Selection .......................... 29
Others
Specification ........................................... 37
About copyright ...................................... 39
11
VQT4M90
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Battery pack Shoulder strap
Battery charger Microphone holder
INPUT terminal cap

AC adaptor (2 caps)
Microphone holder
AC cable adaptor
(AG-AC90P/PJ)
A for AC adaptor Microphone holder
B for Battery charger screws
≥ U.S.A 6 mm (0.24 q) length
(AG-AC90PX) (2 screws)
2 cables
12 mm (0.47 q) length
≥ Taiwan
(2 screws)
Eye cup
Remote control
(Battery built-in)
CD-ROM
Operating Instructions
USB cable
AV multi cable
Lens cap
12
VQT4M90
Optional accessories
Some optional accessories may not be available in some countries.
XLR microphone (AG-MC200G) (AG-AC90P/PJ)
HDMI cable (RP-CHES15)
∫ Attaching the wide conversion
lens/filter kit
SD/SDHC/SDXC Memory Card
(Refer to page 23) Attach the wide conversion lens
(VW-W4907H; optional), ND filter or MC
(AG-AC90P/PJ) protector of the Filter kit (VW-LF49N;
Battery pack (lithium/CGA-D54) optional) in front of the lens.
Wide conversion lens (VW-W4907H)* ≥ It is not possible to attach it to the front of
the lens hood.
Filter kit (VW-LF49N)*
(AG-AC90PX) Be careful about the following.
Battery pack (lithium/CGA-D54s) When 2 lens accessories, such as the ND
filter and wide conversion lens, are fitted
* Remove the lens cap (supplied).
and the zoom lever is pressed toward the
Product numbers correct as of Oct. 2012.
W side, the 4 corners of an image will be
These may be subject to change.
darkened. (Vignetting)
Attaching the lens cap of the

Filter Kit (VW-LF49N; optional)
≥ When the filter kit (VW-LF49N; optional)
is used, protect the lens surface while
the unit is not used with the lens cap
supplied with the filter kit.
13
VQT4M90
Preparation
Names and Functions of Main Parts

12 34 5 6
14
7
15
8
9
10
11
12 13
16
17
18
1 Shoulder strap fixture (l 17) 15 Camera remote jack [CAM REMOTE]

2 Handle [CAM REMOTE] (3.5 mm (0.14 q) mini jack)
3 Sub zoom lever (l 31) It is possible to adjust the focus or iris
≥ This lever functions in the same manner as connecting with the remote control (optional).
the zoom lever. ≥ It is not possible to use the remote control
4 Sub recording start/stop button (optional) in the Intelligent Auto Mode.
≥ This button functions in the same manner as [ZOOM S/S] (2.5 mm (0.1 q) super mini jack)
the recording start/stop button. It is possible to operate zoom operation or
5 Accessory shoe recording start/stop connecting with the remote
6 Microphone holder attachment part control (optional).
7 Audio input terminals 1, 2 (XLR 3 pin) ≥ Do not connect any equipment except the
[AUDIO INPUT1, 2] remote control (optional) to the camera
8 Zoom lever [T/W] (In Recording Mode) remote jack. Brightness of the image may
(l 31) change or it may not focus when an
Volume lever [rVOLs]/Thumbnail equipment other than the remote control
display switch [ / ] (In Playback (optional) is connected.
Mode) 16 Eyepiece corrector lever (l 26)
9 Photoshot button [ ] (l 30) 17 Tripod receptacle
10 Status indicator (l 24) 18 Inlet (cooling fan)
11 Power switch (l 24)
12 Recording start/stop button (l 30)
13 Grip belt (l 17)
14 Headphone terminal [ ]
14
VQT4M90
19 20
25
26
21
22
23
24 27 28 29 30
34
35 41
36 42
37 43
38 44
31 32 33 39 40
19 Wireless remote control sensor 37 Optical image stabilizer button [O.I.S.]
20 Internal microphones 38 White balance button [W.B.] (l 32)
21 Recording lamp 39 Zebra button [ZEBRA]
22 Speaker 40 Color Bar Screen button [BARS]
23 Lens (l 18) 41 Menu button [MENU] (l 28)
24 Lens hood 42 Display/Mode check button [DISP/
25 INPUT 1, 2 (LINE/MIC) switches MODE CHK]
26 INPUT 1, 2 (+48V) switches 43 Counter button [COUNTER]
27 User 1, 2, 3 buttons [USER1, USER2, 44 Counter reset button [RESET]
USER3] (l 33)
28 Intelligent auto/Manual switch
[iA/MANU] (l 31)
29 Quick start button [QUICK START]
30 Quick start lamp
31 Focus ring (l 32)
32 Zoom ring (l 31)
33 Iris ring (l 32)
34 Focus assist button [FOCUS ASSIST]
35 Iris auto/Manual button [IRIS A/M]
(l 32)
36 Focus auto/Manual/¶ button
[FOCUS A/M/¶] (l 32)
15
VQT4M90
45 46 47
48
49
50
51
52
53
54
55 56
57 61
62
63
58 59 60
45 LCD monitor extract part [PULL] (l 25) 62 AV multi connector [AV MULTI] (l 36)
46 LCD monitor (Touch screen) (l 26) ≥ Use the AV multi cable (only the supplied
47 Shoulder strap fixture (l 17) cable).
48 Eye cup attachment part (l 17) 63 USB terminal [USB 2.0]
49 Eye cup (l 17)
50 Viewfinder (l 26)
51 Battery release button [PUSH] (l 20)
52 Battery holder (l 20)
53 DC input terminal [DC IN] (l 22)
≥ Do not use any other AC adaptors except the
supplied one.
54 Mode switch (l 24)
55 CH1, CH2 switches [CH1, CH2]
56 Audio control knobs [CH1, CH2]
57 SD Card slot cover (l 23)
58 Access lamp (card 1) (l 23)
59 Card slot 1 (left)/
Card slot 2 (right) (l 23)
60 Access lamp (card 2) (l 23)
61 HDMI connector [HDMI] (l 36)
16
VQT4M90
∫ Adjust the length of the grip belt so that it fits your hand.
1, 2 Flip the belt cover and the belt.

3 Adjust the length.
4, 5 Replace the belt.
 
 

∫ Attaching the eye cup

Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of the
eye cup.

A Notch
B Protrusion
∫ Attaching the Shoulder strap

We recommend that you attach the shoulder strap (supplied) before going out of doors to record so
as to avoid dropping this unit.
C 20 mm (0.8 q) or longer
17
VQT4M90
∫ Attaching the lens cap

Protect the lens surface with the lens cap while the unit is not used.
Attach or remove it by pinching on it.
18
VQT4M90
Preparation
Power supply
∫ About batteries that you can use with this unit
(AG-AC90P/PJ)
The battery that can be used with this unit is CGA-D54.
(AG-AC90PX)
The battery that can be used with this unit is CGA-D54s.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
Important:
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 °F to
86 °F).
(The battery temperature should also be the same.)
Charging lamp [CHARGE] A

Lights up:
Charging (Battery charging time: l 21)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit correctly
Power lamp B
≥ This will light up when the AC cable is
connected.
C AG-AC90P/PJ: AC cable (K2CA2CA00025; supplied)

AG-AC90PX: AC cable (K2CA2YY00129; supplied)
≥ Insert the plugs as far as they will go.
19
VQT4M90
1 Connect the AC cable to the battery charger and the AC outlet.

(AG-AC90P/PJ only)
≥ Use the AC cable (K2CA2CA00025; supplied) dedicated for the battery charger.
2 Insert the battery into the battery charger by aligning the arrows.
≥ We recommend using Panasonic batteries (l 13, 19).

≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Inserting/removing the battery

Install the battery by inserting it in the direction shown in the figure.
Removing the battery

Make sure that the power switch is set to OFF
and the status indicator is turned off, and then
remove by holding onto it taking care not to
drop. (l 24)
While pressing the battery release button,
remove the battery.
Insert the battery until it clicks and locks.
20
VQT4M90
Charging and recording time

∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
Battery model number Maximum Actual

Charging Recording
[Voltage/Capacity continuously recordable
time format
(minimum)] recordable time time
6 h 25 min 4h
PS 1080/60p
(5 h 45 min) (3 h 35 min)
6 h 45 min 4 h 10 min
PH 1080/60i
(6 h) (3 h 40 min)
6 h 50 min 4 h 15 min
PH 1080/30p
(6 h 5 min) (3 h 45 min)
Supplied battery/CGA-D54
7 h 10 min 4 h 25 min
and CGA-D54s (optional) 6h PH 1080/24p
(6 h 20 min) (3 h 55 min)
[7.2 V/5400 mAh]
6 h 45 min 4 h 10 min
HA 1080/60i
(6 h) (3 h 45 min)
6 h 55 min 4 h 15 min
HE 1080/60i
(6 h 5 min) (3 h 45 min)
7 h 5 min 4 h 20 min
SA 480/60i
(6 h 15 min) (3 h 50 min)
≥ These times are approximations.

≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication

≥ The display changes as the battery capacity reduces. # # # #
If the battery discharges, then will flashes red.
21
VQT4M90
Connecting to the AC outlet

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
(AG-AC90P/PJ) (AG-AC90PX)

 

 
A AC cable (K2CB2CB00022; supplied) B AC cable (K2CA2YY00129; supplied)

≥ Insert the plugs as far as they will go.
1 Connect the AC cable to the AC adaptor and the AC outlet.

(AG-AC90P/PJ only)
≥ Use the AC cable (K2CB2CB00022; supplied) dedicated for the AC adaptor.
2 Connect the AC adaptor to the DC input terminal [DC IN].
∫ Removing the AC adaptor
≥ Make sure to set the power switch to OFF and the status indicator is turned off when
disconnecting the AC adaptor.
22
VQT4M90
Preparation
Preparation of SD cards
The unit can record motion pictures or still pictures to an SD card.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory
Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC Memory Card with
other equipment, check the equipment is compatible with these Memory Cards.
Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion
picture recording.
≥ Please check the latest information on the support website below.

http://pro-av.panasonic.net
≥ Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing an SD card
When using a non Panasonic SD card for the first time, or one which was previously used on
another equipment, it is necessary to format the SD card. (l 29) When the SD card is formatted,
all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
Access lamp A
≥ When this unit is accessing the SD card,
the access lamp lights up.
1 Open the SD card slot cover and

insert (remove) the SD card into
(from) the card slot B.
≥ One SD card can be inserted into each of the
 card slot 1 and the card slot 2.
≥ Face the label side C in the direction shown
in the illustration and press it straight in as far
as it will go.
≥ Press the center of the SD card and then pull
 
it straight out.
2 Securely close the SD card slot
cover.
≥ Securely close it until it clicks.
23
VQT4M90
Preparation
Turning the unit on/off

Set the power switch to ON while pressing the lock release button B to turn on
the unit.

 To turn off the unit
Set the power switch to OFF while
pressing the lock release button.
The status indicator goes off.
A The status indicator lights on.
≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the
power switch to OFF once, and then to ON again.
Preparation
Selecting a mode
Operate the mode switch to change the mode to or .
C Mode switch
Recording Mode (l 30)
Playback Mode (l 35)
24
VQT4M90
Preparation
Using the LCD monitor/Viewfinder

The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted.
The viewfinder is turned on when the LCD monitor is retracted.
Using the LCD monitor

1 Extract the LCD monitor in the
direction as indicated in the figure.
≥ Hold the LCD monitor extract part A when
pulling out.

2 Rotate to the position that is easy to

view.
To retract the LCD monitor

Retract as shown in the figure with the LCD facing
downward.
Range of rotation of the LCD monitor 

≥ It can rotate up to 270o B towards the lens.
25
VQT4M90
How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫ Touch
Touch and release the touch screen to select icon or picture.
≥ Touch the center of the icon.
≥ Touching the touch screen will not operate while you are
touching another part of the touch screen.
∫ Slide while touching

Move your finger while pressing on the touch screen.
∫ About the operation icons

/ / / :
Touch when changing a page or performing settings.
:
Touch to return to the previous screen.
≥ Do not touch the LCD monitor with hard pointed tips, such as ball point pens.
Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
Adjusting the field of view

It adjusts the field of view to show the image on the viewfinder clearly.
1 Adjust the viewfinder to suit your vision so
that you can see the display images clearly.
≥ Be careful not to trap your fingers when moving the
viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o. 
≥ Retract the LCD monitor and turn on the viewfinder.
2 Adjust the focus by rotating the eyepiece
corrector lever.
A Eyepiece corrector lever
26
VQT4M90
Preparation
Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will
appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1 Select the menu. (l 28)
MENU
: [OTHER FUNCTION] # [CLOCK SET]
2 Touch the date or time to be set, then set the Example: AG-AC90PJ
desired value using / .
≥ The year can be set between 2000 and 2039.
3 Touch [ENTER].
≥ The screen may switch to the setting screen for the
[TIME ZONE]. Touch the screen and set the [TIME ZONE].
≥ Touch [EXIT] to complete the setting.
≥ The date and time function is driven by a built-in lithium battery.

≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the
built-in lithium battery, connect the AC adaptor or attach a charged battery to this unit. Leave the
unit as it is for approx. 24 hours and the battery will maintain the date and time for approx.
6 months. (The battery is still being recharged even if the unit is off.)
≥ The way that time is displayed can be changed in the menu settings.
[SW & DISP SETUP] # [DATE/TIME] or [DATE FORMAT]
27
VQT4M90
Preparation
Using the menu screen
MENU
1 Press the MENU button

MENU
.
2 Touch the top menu A.
3 Touch the submenu B.

≥ Next (Previous) page can be displayed by touching /
.
4 Touch the desired item to enter the setting.

5 Touch [EXIT] to exit the menu setting.
28
VQT4M90
Formatting cards
If you use the SD cards for the first time for recording with this unit, format the cards.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, disc etc.
≥ When using two SD cards, format both SD cards.
Select the menu.
MENU
: [OTHER FUNCTION] # [FORMAT CARD] # [SD CARD 1] or [SD CARD 2]
Language Selection
You can select the language on the screen display and the menu screen.
1 Select the menu.
MENU
: [OTHER FUNCTION] # [LANGUAGE]
2 Touch the desired setting language.
Recording
Selecting a media to record

[SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still
pictures.
1 Select the menu.
MENU
: [SW & DISP SETUP] # [MEDIA SELECT]
2 Touch the media to record motion pictures or

still pictures.
≥ The media is selected separately for motion pictures or
still pictures and is then highlighted in yellow.
3 Touch [ENTER].
29
VQT4M90
Recording
Recording motion pictures

1 Change the mode to . 
≥ Extract the LCD monitor.
2 Press the recording start/stop
button C to start recording.
≥ Recording will stop when you press the
recording start/stop button again.
 
A When you begin recording, ; changes to ¥.

B Mode switch
Recording
Recording still pictures

1 Change the mode to .
≥ Extract the LCD monitor.
2 Press the button.
≥ When photos are being recorded, the
remaining recordable number of photos and
the photo operation display are
displayed.

D Mode switch
30
VQT4M90
Recording
Using the zoom

It can be zoomed up to 12k.
≥ It can zoom up to 25k when the [i.Zoom] is set to [ON].
≥ Zoom magnification can be checked in the screen display of Z00 to Z99.The value gets larger
when zoomed in, and the value gets smaller when zoomed out. 99 is displayed during the
i.Zoom.
T Zoom lever/Sub zoom lever

T side:
Close-up recording (zoom in)
W
W side:
Wide-angle recording (zoom out)
Ring Zoom
T Zoom by rotating the ring.
A side:
W
Wide-angle recording (zoom out)
B side:
Close-up recording (zoom in)
A
A Zoom ring
Recording
Intelligent Auto Mode/Manual Mode

MANU
iA/MANU switch
Slide the switch to change the Intelligent Auto
Mode/Manual Mode.
≥ MNL is displayed in the Manual Mode.

≥ The modes appropriate for the condition are set just by pointing the unit to what you want to
record in the Intelligent Auto Mode.
31
VQT4M90
Recording
Manual Recording
IRIS A/M A IRIS A/M button
 B FOCUS A/M/¶ button
FOCUS A/M/∞
C W.B. button
D Focus ring

E Iris ring
W.B.


Focus
Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions,
then use Manual Focus.
≥ Switch to Manual Mode. (l 31)
1 Press the FOCUS A/M/¶ button to switch to Manual Focus.
≥ It will switch to MF from AF.
2 Adjust the focus by rotating the focus ring.
White Balance
Automatic White Balance function may not reproduce natural colors depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
Switch the modes of White Balance by pressing the W.B. button.
Iris adjustment
Perform Iris/Gain adjustments using the iris ring.
Adjust it when the screen is too bright or too dark.
≥ Switch to Manual Mode. (l 31) MNL
1 Press the IRIS A/M button to switch to


Manual Iris Mode.
≥ disappears.
≥ The gain is displayed in dB. F4.0 
2 Adjust the iris by rotating the iris ring. 
A Gain value
B Iris value
C Auto iris icon*
* It is displayed in Auto Iris Mode.
32
VQT4M90
Manual shutter speed

Adjust the shutter speed when recording fast-moving subjects.
≥ Switch to Manual Mode. (l 31)
1 Touch the LCD monitor to display the operation icons and touch SHTR .
2 Touch / to adjust settings.
≥ When [AUTO] is touched, the shutter speed is set automatically.
≥ Touch SHTR to complete the adjustment.
Recording
USER button
Each of the USER button can register one function from the 12 available functions.
≥ There are three USER buttons (USER1 to USER3) on the main body and four USER button icons
(USER4 to USER7) displayed on the LCD monitor.
Setting the USER button

1 Select the menu.
MENU
: [SW & DISP SETUP] # [USER BUTTON SETUP]
2 Touch the USER button you wish to set.
A USER1 button
B USER2 button
  C USER3 button
  D USER4 button
  E USER5 button
 F USER6 button
G USER7 button
≥ The USER button number and currently set function name are displayed. (For example, a display
of 1. [P.AF] means that Push AF has been assigned to USER1 button.)
3 Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 34.
≥ Touch [INH] (Inhibit) if not registering.
≥ Next (Previous) page can be displayed by touching / .
≥ To continuously set other USER buttons, repeat steps 2-3.
4 Touch [EXIT] to complete the setting.
33
VQT4M90
Using the USER button

To use the set USER button, press USER1 to USER3 button or touch the USER4 to USER7 button
icon displayed when you touch the LCD monitor.
(When you use the USER1 to USER3) (When you use the USER4 to USER7)
SCN1 SCN2 SCN3 SCN4 SCN5 SCN6

USER4 ATW
USER5 ATW.L
USER6 HIST
USER7 MENU
USER1 USER2 USER3
Functions of the USER button

∫ List of USER button function
Icon Item Function

[P.AF] [PUSH AF] Push AF
[B.Light] [BACKLIGHT] Backlight Compensation
[S.Light] [SPOTLIGHT] Spotlight
[B.FD] [BLACK FADE] Black Fade
[W.FD] [WHITE FADE] White Fade
[ATW] [ATW] ATW
[ATW.L] [ATW LOCK] ATW Lock
[D.ZM] [D.ZOOM] Digital Zoom
[HIST] [HISTOGRAM] Histogram
[REC.C] [REC CHECK] Recording Check
[LstDel] [LAST SCN DEL] Last Scene Delete
[MENU] [MENU] Menu
34
VQT4M90
Playback
Motion picture/Still picture playback
10 11 12
 PH PH PH
13 14 15
PS PS HA
16 17 18
HE SA SA
1 Change the mode to .

2 Touch the play mode select icon A.
3 Select the [MEDIA] and [VIDEO/PICTURE] you wish to play back.
≥ Touch [ENTER].
4 Touch the scene or the still picture to be played back.
≥ The recording format is displayed in the thumbnail display of the 10 11 12
motion pictures. ( PH , PS , etc.) PH PH PH
≥ Next (Previous) page can be displayed by touching / .

13 14 15
PS PS HA
5 Select the playback operation by touching the

16
HE
17
SA
18
SA
operation icon.
B Operation icon
TC 00:00:00:00
≥ To play or pause a video, touch 1/;.
≥ If you touch the screen while an operation icon is being
displayed or do not touch the icon for a certain period, it will
disappear. To display again, touch the screen.
35
VQT4M90
Watching Video/Pictures on your TV

Connect this unit to a TV.
A HDMI connector
B AV multi connector
AV MULTI
≥ Please use “High Speed HDMI Cables” that have the HDMI logo
(as shown on the cover). Cables not conforming to the HDMI
standard will not work. Panasonic HDMI cable is recommended.
Part No.: RP-CHES15 (1.5 m) (4.9 feet)
≥ Do not use any other AV multi cables except the supplied one.  
≥ Use the AV multi cable (supplied) or HDMI cable (optional) and
check the output settings.
36
VQT4M90
Others
Specification
Memory Card Camera-Recorder
Information for your safety
Power source: DC 12 V (When using AC adaptor)

DC 7.2 V (When using battery)
Power consumption: 12.9 W
Recording format: Lens:

AVCHD format version 2.0 compliant Auto Iris optical zoom (Full range AF)
(AVCHD Progressive) F value (focal length)
Motion picture compression: F1.5 to F2.8 (Focal length; 2.84 mm to
MPEG-4 AVC/H.264 34.1 mm)
35 mm equivalent;
Audio compression:
Motion picture/Still picture; 29.8 mm to
Dolby® Digital (5.1 ch/2 ch)
383.7 mm (16:9)
Recording mode and transfer rate:
Minimum focus distance;
[PS 1080/60p]; Approx. 25 Mbps (VBR)
Approx. 3.5 cm (1.4q) (Wide)/
[PH 1080/60i]; Approx. 21 Mbps (VBR)
Approx. 1.2 m (3.9 feet) (Tele)
[PH 1080/30p]; Approx. 21 Mbps (VBR)
Filter diameter:
[PH 1080/24p]; Approx. 21 Mbps (VBR)
49 mm
[HA 1080/60i]; Approx. 17 Mbps (VBR)
[HE 1080/60i]; Approx. 6 Mbps (VBR) Zoom:
[SA 480/60i]; Approx. 9 Mbps (VBR) 12k optical zoom, 25k i.Zoom,
Refer to the operating instructions Vol.2 for the 2k/5k/10k digital zoom
recordable time and picture size. Image stabilizer function:
Still picture recording format: Optical (Hybrid Optical Image Stabilizer, Active
JPEG corresponding (Design rule for Camera Mode)
File system, based on Exif 2.2 standard) Monitor:
Refer to the operating instructions Vol.2 for the 3.5z wide LCD monitor (Approx. 1152 K dots)
picture size and number of recordable pictures. Viewfinder:
Recording media: 0.24z wide EVF
SD Memory Card (Approx. 263 K dots equivalent)
SDHC Memory Card Microphone:
SDXC Memory Card 5.1 channel surround microphone (with a zoom
Refer to page 23 for details on SD cards usable microphone/focus microphone function)/stereo
in this unit. microphone
Image sensor: Minimum required illumination:
1/4.7z 3MOS image sensor Approx. 3 lx (1/30 with [AUTO SLOW SHTR] is
Approx. 8040 K (2680 Kk3) set to [ON], Intelligent Auto Mode)
37
VQT4M90
AV multi connector video output level: AC adaptor

Component video output level; Information for your safety
Y; 1.0 Vp-p, 75 h
Pb; 0.7 Vp-p, 75 h Power source: AC 110 V to 240 V,
Pr; 0.7 Vp-p, 75 h 50/60 Hz
AV video output level; Power
1.0 Vp-p, 75 h consumption: 42 W
HDMI connector video output level: DC output: DC 12 V, 2.5 A
HDMI™ 1080p/1080i/480p
AV multi connector audio output level
Dimensions:
(Line):
115 mm (W)k37 mm (H)k57 mm (D)
2 ch
[4.53 q (W)k1.46 q (H)k2.24 q (D)]
HDMI connector audio output level: Mass (Weight):
Dolby Digital/Linear PCM Approx. 210 g (Approx. 0.46 lbs.)
Headphone output:
3.5 mm stereo mini jack Battery charger
Camera remote terminal: Information for your safety
2.5 mm super mini jack k1 (ZOOM S/S)
3.5 mm mini jack k1 (FOCUS/IRIS) Power source: AC 100 V to 240 V,
XLR audio input terminals: 50/60 Hz
XLR (3 pin) k2 (INPUT1/INPUT2) Power
LINE; 0 dBu consumption: 0.4 A
MIC; j50 dBu/j60 dBu (switch with the menu) DC output: DC 8.4 V, 1.2 A
USB:
Reader function (No copyright protection
support), Dimensions:
Hi-Speed USB (USB 2.0), USB terminal Type 70 mm (W)k44.5 mm (H)k116 mm (D)
Mini B [2.76 q (W)k1.75 q (H)k4.57 q (D)]
Dimensions: Mass (Weight):
160 mm (W)k195 mm (H)k350 mm (D) Approx. 160 g (Approx. 0.35 lbs.)
[6.30 q (W)k7.68 q (H)k13.8 q (D)]
(including projecting parts)
Mass (Weight):
Approx. 1500 g (Approx. 3.30 lbs.)
[without battery (supplied) and an SD card
(optional)]
Mass (Weight) in operation:
Approx. 1780 g (Approx. 3.90 lbs.)
[with battery (supplied) and an SD card
(optional)]
Operating temperature:
0 oC to 40 oC (32 °F to 104 °F)
Operating humidity:
10%RH to 80%RH
Battery operation time:
See page 21
38
VQT4M90
Others
About copyright
∫ Carefully observe copyright This product is licensed under the AVC patent
laws portfolio license for the personal and
non-commercial use of a consumer to (i)
IMPORTANT encode video in compliance with the AVC
“Unauthorized recording of copyrighted Standard (“AVC Video”) and/or (ii) decode AVC
television programs, video tapes and other Video that was encoded by a consumer
materials may infringe the right of engaged in a personal and non-commercial
copyright owners and be contrary to activity and/or was obtained from a video
copyright laws.” provider licensed to provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
∫ Licenses obtained from MPEG LA, LLC.
≥ SDXC Logo is a trademark of SD-3C, LLC. See http://www.mpegla.com.
≥ “AVCHD”, “AVCHD Progressive” and the
“AVCHD Progressive” logo are trademarks of ≥ Separate license contracts must be obtained
Panasonic Corporation and Sony from MPEG LA where SD Memory Cards
Corporation. containing information recorded with this
≥ Manufactured under license from Dolby product are to be distributed to end users for
Laboratories. Dolby and the double-D symbol commercial purposes. “End user” refers to
are trademarks of Dolby Laboratories. persons or organizations handling such
≥ HDMI, the HDMI Logo, and High-Definition contents for personal use.
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other countries.
≥ Microsoft®, Windows® and Windows Vista®
are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
≥ Mac and Mac OS are trademarks of
Apple Inc., registered in the U.S. and other
countries.
≥ Other names of systems and products
mentioned in these instructions are usually
the registered trademarks or trademarks of
the manufacturers who developed the system
or product concerned.
39
VQT4M90
Web Site: http://panasonic.net
© Panasonic Corporation 2012

AG-AC90P AG-AC90PJ AG-AC90PX: Operating Instructions

Uploaded by

Copyright:

Available Formats

AG-AC90P AG-AC90PJ AG-AC90PX: Operating Instructions

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AG-AC90P AG-AC90PJ AG-AC90PX: Operating Instructions

Uploaded by

Copyright:

Available Formats

AG-AC90-VQT4M90_mst.

book 1 ページ ２０１２年９月２５日 火曜日 午後１時１８分

Operating Instructions Vol.1

Memory Card Camera-Recorder

Information for Your Safety

THE FOLLOWING APPLIES ONLY IN THE U.S.A. and CANADA.

The lightning flash with arrowhead

FCC NOTICE (USA)

indicates safety information.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

∫ Concerning the battery

Button-type battery: CR2025

∫ Product identification marking

U.S.A./CANADA CONSUMERS: ATTENTION:

<For USA-California only>

-If you see this symbol-

Information on Disposal in other Countries outside the European Union

IMPORTANT SAFETY INSTRUCTIONS

5) Do not use this apparatus near water.

Para remover a bateria

2) Remova a bateria tipo botão do suporte

∫ Cautions for use ∫ About the recording format for

About using wireless remote control ∫ Caution regarding laser beams

AVCCAM 3 Year Warranty Repair Program*1

Customers who register as users on the website will receive

1st year 2nd year 3rd year

AVCCAM Extended warranty

Purchase Register online “Registration Notice”

Free 3 years of Warranty Repairs

Details about user registration and the extended warranty:

Information for Your Safety......................2

Battery pack Shoulder strap

Battery charger Microphone holder

INPUT terminal cap

Attaching the lens cap of the

Names and Functions of Main Parts

1 Shoulder strap fixture (l 17) 15 Camera remote jack [CAM REMOTE]

1, 2 Flip the belt cover and the belt.

∫ Attaching the eye cup

∫ Attaching the Shoulder strap

∫ Attaching the lens cap

Attach or remove it by pinching on it.

Charging the battery

Charging lamp [CHARGE] A

C AG-AC90P/PJ: AC cable (K2CA2CA00025; supplied)

1 Connect the AC cable to the battery charger and the AC outlet.

≥ We recommend using Panasonic batteries (l 13, 19).

Inserting/removing the battery

Removing the battery

Insert the battery until it clicks and locks.

Charging and recording time

Battery model number Maximum Actual

≥ These times are approximations.

Battery capacity indication

Connecting to the AC outlet

A AC cable (K2CB2CB00022; supplied) B AC cable (K2CA2YY00129; supplied)

1 Connect the AC cable to the AC adaptor and the AC outlet.

∫ Removing the AC adaptor

Cards that you can use with this unit

book 1 ページ２０１２年９月２５日　火曜日　午後１時１８分