A c ro w f l e x S y s t e m

ACROW MISR Provides Full Site Service Based On More Than 35 Years Experience In The Field
C
Contents
Contents
Intoduction

Acrow Slab Props

2

Acrow slab props 4

Erection 5

Design Tables 6

Acrowflex early striking (AES) 8

Beam Formwork (UZ) 9

Components 10
 Intoduction
•The Acrowflex is a slab formwork secondary girders. •Acrowflex is mainly when shoring
system that could be adapted to any •The beams are supported by props. height is less than 4.5 m.
floor plan. •Acrowflex is the cost effective •Few system components, only H20
•It consists mainly of H20 wooden solution for slabs of thickness up to girders, Props, stirrup heads and Prop
beams that work as main and 50 cm. legs.

a
c

b
a- H20 beams as main and secondary
girders.
b- A.E.P or Alu props for shoring.
c- Stirrup head.
d- Prop leg.

Acrow European Props(A.E.P) for shoring

2
Acrow Slab Props
AEP - Acrow European Prop
inner tube plate

•The Prop AEP is designed to be

inner tube
used as a support element for Acrow
horizontal formwork.

•The AEP is a hot dip galvanized Prop

having high durability.

•Using the AEP (Acrow European

Prop) gives high load capacity.

•Permanent preventaton against

unintentional disengagement. Outer tube

•The inner and outer parts of a prop

shall be prevented permanently from
being separated except by intentional
action.

•Anti hand trap. When the prop is fuly

closed without the pin inserted, there
is 100 mm clearance between the
endmost part of the outer tube and Outer tube plate

the inner tube.

Extension G 300 E G 350 E G 410 D 20/400 G 490 D 20/450

( cm ) reg. DIN 30/300 reg. DIN 30/350 reg. DIN nach EN reg. DIN nach EN

150
160
180 35.0
200 35.0 35.0

220 35.0 35.0 35.0

240 31.3 35.0 35.0
250 28.8 30 kN 33.6 35.0 35.0
260 26.6 31.1 35.0 35.0
30 kN
280 23.0 26.8 31.4 35.0

300 20.0 23.3 27.3 30.5

20 kN
320 20.5 24.0 28.7
340 18.2 21.3 25.4
20 kN
350 17.1 20.1 24.3
360 19.0 22.7
380 17.0 20.4
400 15.4 18.4
420 16.7
450 14.5
460
480

named reg.
EN 1065
C30 E30 C35 E35 C40 D40 C45 D45

3
 Acrow slab props
Alu Props:
The ALU-PROP post shores are made
of aluminium which makes the props
light and easy in handling.

Four different sizes of ALU-PROPS

are available, ALP 300,400,500 and
600, the ALP300 can be extended from
1.708 m to 3.0 m but weights
only 16.0 Kg.
Alu prop profile
Product advantages:
•Height adjustment without using
pins,the inner tube (a) is threaded
not like the conventional steel props
fitted.
a
•The nut and the key (b) make safety
stops as the inner tube can not slide
b
out accidently during transportation.

•Economic as it can be used as

shoring towers by bracing it with the
alu-frames or as single props.

•Alu-Props could be braced using

swivel couplers and tubes.

•High load capacity: 60 kN

adjusting the height is easy, just release

the inner tube, then adjust with the nut.

Threaded inner tube with the nut makes ALU PROP with ALU DECK panels, fitted Bracing Shoringtowers with Alu Frames
accurate adjustment. with Drophead

4
Erection

1 2 3

Place stirrup
head to the prop

•Attach the Prop leg to the props in •Erect the second row of timber •Continue erecting the rest of the
order to be stable as in picture 1. beams and props as in picture 2 main beams with the main props.
•Install the H20 timber beam (size according to the design drawings.
according to design
drawings).

4 5 6

•Install secondary H20 beams as in •Installing secondary H20 beams. •Attach the intermediate props
picture 4. between the main props according to
the design spacing.
•The plywood is ready to be installed.

5
 Design Tables
Secondary Girder: H20
Main Girder: H20

Dead load g = 0.40 kn/m2

Concrete load b = 25 kn/m3 x d (m)
Live load p = 0.20 x b
1.5 ≤ p ≤ 5.0 kN/m2
Total load q=g+b+p

The deflection has been limited to

l/500. Sec.
girders assumed as single span.

6
Design Tables
Secondary Girder: H20
Main Girder: 2 x H20

Dead load g = 0.40 kn/m2

Concrete load b = 25 kn/m3 x d (m)
Live load p = 0.20 x b
1.5 ≤ p ≤ 5.0 kN/m2
Total load q=g+b+p

the deflection has been limited to

l/500. Sec.
girders assumed as single span.

7
 Acrowflex early striking (AES)
•The AES is an integrated system for
early striking.

•The AES allows the stripping

operation to be pre-defined.

•The AES drophead has a quick

lowering function for minimizing
damage when striking. It also keeps
props stables during formwork
removal.

•The drophead principle allows early

striking after 1 day depending on the
slab thickness and the concrete
strength.

•Props on the edges or infill areas

can be dismantled and used for the
next cycle,thus reducing shoring
quantities.

•When the floor props are used for

temporary back propping, their
permitted load-bearing capacity is
10kN higher.

Important note:

•Floor props fitted with the drophead

must not be extended to their full
length.

•Permitted floor-prop extension

length is less 50 cm than the floor
prop maximum length.

Example: floor prop D45 is allowed to

be extended to max. 400 cm.

Drophead with H20 as main girders After removal of formwork, only Props with dropheads remaining

8
Beam Formwork (UZ)
•With the UZ beam and bracket,
beams are continously formed.
•No ties are required for beams of
depth up to 80 cm.

UZ beam

Side beam bracket

Width of influence of the bracket (m)

Beam depth (m)
Slab thickness (m)

9
 Components

Item Description Code no. Weight (kg)

Acrow Prop E30 6221177013381 16.90

Acrow Prop E35 6221177013392 20.50
Acrow Prop D40 6221177013403 22.00
Acrow Prop D45 6221177049744 25.40

Alu Prop 300 6221177080891 16.00

Alu Prop 400 6221177080907 19.54
Alu Prop 500 6221177080914 23.12
Alu Prop 600 6221177080921 26.65

Stirrup Head 6221177048440 4.40

H20 to H20 connection 6221177006334 0.15

10
Components

Item Description Code no. Weight (kg)

Claw head (single) 6221177013752 1.10

Claw head (double) 6221177013769 1.30

Prop hanger (single) 6221177013578 1.20

Prop hanger (double) 6221177013585 1.60

Prop leg 6221177013776 12.00

Timber H20 L=2.50 m 6221177024062 12.50

Timber H20 L=2.90 m 6221177024076 14.50
Timber H20 L=3.30 m 6221177024093 16.50
Timber H20 L=3.60 m 6221177024109 18.00
Timber H20 L=3.90 m 6221177024116 19.50
Timber H20 L=4.50 m 6221177024130 22.50
Timber H20 L=4.90 m 6221177024147 24.50
Timber H20 L=5.90 m 6221177024154 29.50
Permissible bending Moment = 5.0 KNm
Permissible shear for = 11.0 KN
Approx. weight = 5.0 Kg/m

11
 acrow
acrow
5
7

acrow

acrow
acrow

1 Egypt 2 KSA 3 Kuwait

Acrow Misr Acrow Al saudia Ltd co. Khalid Ali, Al Kaharafi
Head Office, Factory: P.O.Box : 305746-Riyadh-11361 & Bros. Co. W.LL
Wady Houf, Helwan Saudi Arabia Riyadh branch: Tel: +965 4813 127 / 4817 289
Tel: +202 23690 616 / 23690 739 Tel : +966 1 2160504
Fax : +966 1 2160503
acrow Fax: +965 4835 501
+202 23695 700 / 23699 976 E.mail: [email protected]
Fax: +202 23695 260 Email : [email protected]
E.mail: [email protected]
Jeddah branch:
Alex Branch Tel : +966 2 639 16 24
27 Dr. mahmoud Daoud st., Fax :+966 2 691 85 45
Email : [email protected]
4 Libya
Tel: +203 4200 289
Acrow Tripoli
E.mail: [email protected]
Tel: +218 91 411 6873 / 91 331 9367
Damam branch: acrow
Fax: +218 21 351 3838
Port Said Branch Tel: +966 3 8054151
E.mail: [email protected]
El freepor Bulding
Tel: +2066 3232542
[email protected]
 acrow

3 acrow

1 9 8
2
6

acrow
acrow

5 Algeria 6 Oman 7 Morocco

ACROW-DZ COMPANY Acrow Muscat 38 Rue Abou El Waqt, Res
Tel: +213 (0) 21 75 54 74/63/64 Tel: +968 9828 76 82 Haydar El Jarrah, Rez
Tel: +213 (0) 21 50 55 58 E.mail: [email protected] Chausser No. 10
Fax: +213 (0) 21 50 55 58 Casblanca
Address : Siege Social cité des travailleurs e-mail: [email protected]
lot. 09 groupe 02 Dar El beida, Alger
Email : [email protected]

8 UAE 9 Qatar
Acrow Gulf Acrow Qatar
Tel: +971 4343 94 98 Tel: +974 4582 357 acrow
acrow
Fax: +971 4343 95 98
acrow
Fax: +974 4582 376
E.mail: [email protected] E.mail: [email protected]
 Acrow H20 & solider Acrow One shutter solider

Acrow V.M.C Acrow Tech-Form Acrow Cuplock Acrow Bridge table form

Acrow Circular column Acrow climbing system Acrow shorbrace Table form Acrow Big steel panel

Acrow European prop Acrow Vari form Acrow Prop table form Acrow frame
02/2013, Code No.:2007050060985

w w w. a c ro w. c o

Acrow early striking system Acrow Ring lock