Scribd
Upload
146 views

C-9302C Interposing Relay Module Issue4.03

The C-9302C Interposing Relay Module is designed to start and stop 220VAC devices connected to a fire control panel. It provides normally open and normally closed output contacts and insulation of the feedback signal from 220VAC devices. The module plugs into a back box for surface or wall installation and connects the control panel outputs to the device inputs through terminals for voltage or volt-free operation. It can control a device using one or two channels of the control panel for pulse operation.

Uploaded by

Agung Pramu Aji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
146 views

C-9302C Interposing Relay Module Issue4.03

The C-9302C Interposing Relay Module is designed to start and stop 220VAC devices connected to a fire control panel. It provides normally open and normally closed output contacts and insulation of the feedback signal from 220VAC devices. The module plugs into a back box for surface or wall installation and connects the control panel outputs to the device inputs through terminals for voltage or volt-free operation. It can control a device using one or two channels of the control panel for pulse operation.

Uploaded by

Agung Pramu Aji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

C-9302C

The Intelligent Solution


Interposing Relay Module

Features
 Driving 220VAC devices.
 Providing normally open, normally closed output
contacts.
 Cable checking.
 Insulated feedback signal from 220VAC devices.
 Plug-in structure.

Description
C-9302C Interposing Relay Module is non-addressable, If the cable conduit is inside the wall, the base is
designed to start/stop the devices driven by heavy DC installed onto the Back Box (Fig. 2). If the cable conduit
and 220VAC. The module is used together with is on the surface of the wall, B-9310 Back Box is
fireman’s Control Panel (FCP) featuring cable checking, available (Fig. 3).
such as GST014FCP.
B-9310
Conduit Back Box
Conduit Back Box
Connection and Cabling Module Module

Fig. 1 shows terminals on the module.


65mm

Mounting Mounting
AN N COM NO NC
Hole Hole
7 1
Mounting
8 2
Direction
6mm

9 10 15 16

C- C+ A1 A2
Fig. 2 Fig. 3
Note the upward arrow for mounting direction (Fig. 1).

Fig. 1 Applications
C+, C-: Input terminals of start command signal 1. Fig. 4 shows that the module controls the devices
(24VDC), connecting with output control terminal of
by volt-free input mode. .
fireman’s control panel.
A1, A2: Input terminals of normally open volt-free
C1＋ C＋ COM
feedback signal, connecting with volt-free feedback C-9302C
FCP

terminals of controlled device. Interposing Relay Module Device

AN, N: Voltage feedback input terminals (220VAC), C1- C－ A1 A2 NO


connecting with voltage feedback terminals of
controlled device. Feedback

COM, NO, NC: Output control terminals, volt-free


normally open, normally closed contacts (5A, 220VAC), Fig. 4
connecting with control terminals of the controlled 2. Fig. 5 shows that the module controls the devices
by voltage input mode.
device.
Recommended Cabling
1.5mm2 or above fire cable for each terminal, subject to C1＋ C＋ COM
C-9302C
FCP

local codes. Interposing Relay Module Device


C1- C－ AN N NO
Installation
Feedback
The module is simply plugged onto the base after
corresponding terminals are connected.
Fig. 5

30303451 Issue 4.03


3. It occupies two channels of fireman’s control panel
Tools and Accessories
for the control of device needing start/stop. One
channel is to start, and the other is to stop. Output
device is pulse mode. Fig. 6 shows that two channels Model Name Remark
of fireman’s control panel control the device.
B-9310 Back box Order separately

C1＋ C＋ COM1 Limited Warranty


C-9302C
Device
Interposing Relay Module
C1- C－ NO1 GST warrants that the product will be free of charge
FCP

C2＋ for repairing or replacing from defects in design,


C＋ COM2
C-9302C
Interposing Relay Module Device materials and workmanship during warranty period.
C2- C－ NC2 This warranty shall not apply to any product that is
found to have been improperly installed or used in any
Fig. 6 way not in accordance with the instructions supplied
Note: In Fig. 6, voltage or volt-free feedback can with the product. Anybody, including the agents,
also be connected based on requirements, distributors or employees, is not in the position to
please refer to Fig. 4 or Fig. 5 for the specific amend the contents of this warranty. Please contact
connections. your local distributor for products not covered by this
warranty.
Specification
Operating Voltage 24VDC (20VDC~28VDC)
Standby Current ≤4.5mA
Action Current ≤26mA
Output Capacity 5A/220VAC or 5A/24VDC
Ingress Protection IP30
Rating
Operating -10℃～+50℃
Temperature
Relative Humidity ≤95%, non condensing
Material and Color ABS, white (RAL 9016)
of Enclosure
Dimension 120mm×80mm×43mm
(L×W×H) (with base)
Weight About 187g (with base)

This Data Sheet is subject to change without notice. Please contact GST for more information or questions.

Gulf Security Technology Co., Ltd.


No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532
[email protected] www.gst.com.cn

30303451 Issue 4.03

You might also like