Scribd
Upload
1K views8 pages

GT06N

This document contains instructions for commands to control a tracking device. It lists 23 commands that can be used to check status, parameters, and settings, as well as configure functions like APN, URL, GPS intervals, and more. Commands are sent to the device with the device ID number and command code, followed by additional parameters and a termination symbol. Replies from the device confirm receipt and provide requested status information.

Uploaded by

Eri El Niño
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views8 pages

GT06N

This document contains instructions for commands to control a tracking device. It lists 23 commands that can be used to check status, parameters, and settings, as well as configure functions like APN, URL, GPS intervals, and more. Commands are sent to the device with the device ID number and command code, followed by additional parameters and a termination symbol. Replies from the device confirm receipt and provide requested status information.

Uploaded by

Eri El Niño
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

GT02/TR02 Commands (V1.

1)
No. Function Command Reply
1 QUERY CLASS

< VERSION>
Check firmware VERSION,666666# TR02_31_7W23M_B25E_V20_WM
version < BRANCH> 2013-2-23 GXQ23_08B
2

Battery:Normal;GPRS: Link
Down;GSM Signal Level:
Check status STATUS,666666# Strong;GPS: Searching Satellite;GPS
Signal Level: 6 <
28,24,26,19,24,24> ;
3
IMEI:864717004006619;TimeZone:
Check parameters PARAM,666666# E,8;Sensor:2;LEVEL:18;
4

CMNET,0,0.0.0.0,,;10,10,3600;E8;1,
Check simple SCXSZ,666666# www.cooaccess.net,8821,0;,,,;2;htt
parameters p://maps.google.com/maps?q=;;;
5

GPRS:ON;APN:CMNET,0,0.0.0.0,,;LB
S_GPSUpload_GPSWork:20,10,360
Check GPRS GPRSSET,666666# 0;Server:1,www.cooaccess.net,882
1,0;URL:http://maps.google.com/m
aps?q=;
6

< DateTime:13-05-08 18:00:38>


Check URL URL,666666# http://maps.google.com/maps?
q=N22.577148,E113.916800
7

Lat:N22.577200,Lon:E113.916610,
Real-time tracking WHERE,666666# Course:155.44,Speed:3.9151,DateT
ime:13-05-08 18:05:33
8
9 SETTING CLASS

APN,666666,apnnam
e#
Set APN OR OK
APN,666666,apnnam
e,user,pwd#
10
TIMER,666666,LBS
uploading time
Set GPS/LBS interval interval(min),GPS OK
uploading time
interval(second)#
11

EURL,666666,network
Edit URL OK
links#
12

GPS data upload TIMESET,666666,p1# OK


distance

13
14 GPRS switch GPRSON,666666,1/0# OK

GPS working distance SENDS,666666,p1# OK

15
17 Recovery FACTORY,666666# OK

The terminal will restart after 1


Reboot RESET,666666# minute!
18
PASSWORD,666666,n
Modify password OK
ew password#
19
Recovery the RECOVER,999999# OK
password
20
SERVER,666666,mode
,domainName/IP,por
Set server t,protocol OK

21

GMT, 666666,time
Set time zone bearing, time zone# OK

22
23 ERROR EXPLANATION

24 ERROR ID EXPLANATION

Command length is
ERROR 100 over the ruled length.
25

Parameters of
ERROR 101 Command are over
the ruled length.
26
The format of
ERROR 102 command is incorrect.
27
The format of
ERROR 103 password is incorrect.
28
Family numbers are
ERROR 104 all set up fully.
29
Family numbers are
ERROR 105 not exist already.
30
The serial number is
ERROR 106 incorrect.
31
32 ERROR 107 Command is not exist.

No command end
ERROR 108 symbol #
33
34 ERROR 109 Password is incorrect.

Only family/SOS
ERROR 110 number could effect
this function.
35
s (V1.1)
Explanation

Get the current location

eg: apn,666666,kktcell#
apn,666666,orange,orang
e,orange#
eg: TIMER,666666,,10#
LBS uploading time
interval:10-60min;
GPS uploading time
interval:5-18000S;

eg:
http://maps.google.com/
maps?q=

eg:
TIMESET,666666,20#
//range[1-999min]
when device ACC Low
frequency electric ,alarm
triggered GPS upload
times

1 means ON, 0 means OFF

eg: SENDS,666666,2#
//range[0-254min,0
means working always]

Restore to factory setting

The device would reboot


after receiving the
command.

eg:

PASSWORD,666666,99999
9#
eg:
SERVER,666666,1,www.yd
pat.com,8011,0#

SERVER,666666,0,211.154
.135.113,8011,0#
mode = 1 means set with
domain name
mode = 0 means set with
ip address
protocol = 0 means
connect server with TCP
protocol
eg: protocol = 1 means
connect server with UDP
protocol
GMT,666666,E,8#

Time bearing:
E/W

Time zon: 0-12

You might also like